Engineering Commons^™

Non-Thermal Atmospheric-Pressure Plasma For Sterilization Of Surfaces And Biofilms, Johanna Ursula Neuber

Electrical & Computer Engineering Theses & Dissertations

Bacterial resistance to antimicrobial methods is a critical issue in many fields of medicine. This work describes the studies performed to characterize and optimize the bacterial inactivation effects of a non-thermal atmospheric-pressure plasma brush and plasma jet on a laminate surface inoculated with Acinetobacter baumannii and Staphylococcus aureus, and a cultivated Enterococcus faecalis biofilm, respectively. These treatments are pilot studies for eventual application to surface sterilization in hospitals and root canal disinfection. To evaluate bacterial inactivation, after treatment and recovery, the bacterial colony forming units (CFUs) are counted. Several different methods are used to optimize the antimicrobial effect. For the …

Hardware Acceleration For Real Time Atmospheric Turbulence Compensation, Nikhileswar Badri

Theses and Dissertations

Atmospheric turbulence compensation techniques are used to apply filters and to remove noise from the information, such as images. In mission control applications, the processing is required in real time. This thesis focuses on understanding the process and developing architecture for hardware acceleration on the FPGA. Error calculation is a computational extensive component and is a continuous research area to correctly and efficiently measure it in real-time for data processing. The Error is used as a metric to compute the corrected data, such as an image pixel representing the phase, color and intensity to perform image processing. The thesis discusses …

Novel Nitroxyl Radical Synthesis, Max Meier

UCARE: Research Products

The purpose of this research is to synthesize a novel compound, 2,2,6,6-dispirocyclobutylpiperidine- 4-one (P), for use as an oxidation reactant to form the corresponding nitroxyl radical. This is to be conducted using a reliable method for a variety of 2,2,6,6-tetrasubstituted piperidine-4-one compounds as detailed by Sakai et al. [3]. Sakai uses a variety of 6-member cyclic ketones, which are quite stable. It was attempted to use 4-member cyclic ketones to research the effectiveness of 2,6-substitution using a less stable carbonyl compound. Cyclobutanone and 3-oxycetanone were used as candidates for this reaction. Both are delicate, expensive ketones.

Patterned Alginate Hydrogels To Induce Chondrocyte Alignment, Jordan Catherine Verplank, Taylor D. Laughlin, Angela K. Pannier

UCARE: Research Products

The growth plate has an intricate architecture, and this architecture is necessary for directional growth of bones. Specifically, the cells align in longitudinal columns. As the growth plate expands with this pattern, the bone elongates with the same alignment pattern. The purpose of this research is to mimic this single celled, columnar alignment in vitro. In developing this alignment in vitro, this research will contribute to the overall study of growing growth for the development of improved therapeutic treatments and engineered tissues for transplants.

Cerebrovascular Reactivity Change With Increased Intracranial Pressure, Madison Burger, M. Alwatban, Allison Porter, Ben Hage, Greg Bashford

UCARE: Research Products

Cerebrovascular reactivity (CVR) is an important regulatory factor of the brain. The parameter controls the dilation and constriction of blood vessels in the brain in response to certain stimuli, such as carbon dioxide. Abnormal CVR values could potentially be indicators of poorly functioning regulatory systems. Testing of CVR is one method of assessing the brain's regulatory capabilities. The purpose of this study was to test for a relationship between CVR and intracranial pressure (ICP).

In this study, increased intracranial pressure was created in 4 female subjects through head down tilt, using an inversion table. Subjects were lowered in the table …

Analysis Of Breath-Holding Index As An Assessment Of Cerebrovascular Reactivity, Allison P. Porter, Madison Burger, Mohammed Alwatban, Benjamin Hage, Greg Bashford

UCARE: Research Products

Cerebrovascular reactivity (CVR) is a key factor in regulating blood flow into the brain, and a marker for vascular disease. If the brain's regulatory system is not working, a patient may be in serious trouble. Testing of CVR is one method of assessing the brain's regulatory capabilities. Transcranial Doppler ultrasound (TCD) is one tool to measure CVR. In this method, carbon dioxide in the blood is transiently increased (such as with the holding of breath), and the resulting blood flow in the brain is measured. In this study, we are going to measure the variability of the breathholding index.

Within …

Design And Testing Of Robotic Capsule Biosensors In The Small Intestine, Zachary Bram

Robotics and Mechanical Systems Design

Biosensors are a tool that is growing in usage and is sought out by doctors and patients alike for being a non-invasive method to monitor health. The data that can be collected from these sensors can be analyzed by doctors that are away from patients, or even by patients that do not have the ability to see a doctor. The purpose of this work is to design and test a biosensor capsule that can attach itself to the inner wall of the small intestine for a short period of time before exiting the body. This research project was a continuation …

Forecast Verification Of The Current Icing Potential (Cip) To Predict Lightning Hazards At U.S. Spaceports, Robert Edward Haley

Doctoral Dissertations and Master's Theses

Government spaceports employ extensive lightning detection networks that may not be available at commercial spaceports. Therefore, the Federal Aviation Administration identified the need for diagnosing the threat of triggered lightning without in-situ measurements. Anecdotal observations of the Aviation Weather Center’s Current Icing Potential (CIP) diagnostic model indicated a potentially high correlation between lightning activity and icing potential. A forecast verification study and supporting representative case studies were conducted to quantify the CIP’s ability to diagnose existing lightning hazards. The study showed that high positive statistical correlations between the CIP and lightning activity do exist, but so do negative correlations. During …

Traffic Study Using A Video Camera And An Image Processing Software Lessons Learned, Sanjay Tewari, Nazimuddin Wasiuddin, Marissa K. Orr

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Highway Engineering I – CVEN332, is a junior-level course in civil engineering that covers primarily traffic engineering and transportation planning. Traffic engineering topics include isolated intersection signal timing design, intersection capacity analysis and freeway capacity analysis. In fall 2015, students collected real life and local field data in two design modules and used a traffic camera compatible with the video processing software in one design module. The objective of this study is to assess if the usage of local, real life field data and introduction of a traffic camera have any impact on increasing learning, increasing feeling of preparedness and …

Environmental Engineering Laboratory Development To Promote Active And Hands-On Learning, Sanjay Tewari

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This extended abstract details one instructor’s experience in incorporating hands-on laboratory portion in a junior level civil engineering class, Environmental Engineering. The objective of the change was to help students become more involved and aware of their own learning through active participation so that they can relate to course contents in a better way. The author sought to achieve this through a laboratory structure that 1) required students to reflect on certain topics and device a do-it-yourself experiment to measure certain parameters and 2) provided a level of autonomy by allowing them to choose to work alone or in small …

Model For Coupled Large Strain Consolidation And Solute Transport In Layered Soils, Hefu Pu, Patrick J. Fox

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A numerical model, called CST3 (Consolidation and Solute Transport 3), is presented for coupled one-dimensional large strain consolidation and solute transport in layered soils. The consolidation algorithm accounts for vertical strain, soil self-weight, general constitutive relationships, relative velocity of fluid and solid phases, changing compressibility and hydraulic conductivity during consolidation, unload/reload, time-dependent loading and boundary conditions, external hydraulic gradient, variable preconsolidation stress profiles, and multiple soil layers with different material properties. The solute transport algorithm accounts for advection, diffusion, mechanical dispersion, linear and nonlinear sorption, equilibrium and nonequilibrium sorption, porosity-dependent effective diffusion coefficient, and first-order decay reactions. CST3 is based …

Post-Repair Seismic Assessment Of Rc Bridges Damaged With Fractured Column Bars - A Numerical Approach, Ruili He, Yang Yang, Lesley H. Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Seismic repair of reinforced concrete (RC) bridge columns has been studied extensively during the past several decades; however, few studies have been conducted on the influence of the column repair (member level) on the post-repair performance of bridge structures (system level). In a previous experimental study by the authors, a method was developed to rapidly repair severely damaged RC bridge columns to enable the quick reopening of the bridge to emergency traffic. Thus, a lower limit state was used for the repair design, so that the lateral strength and drift capacity of a repaired RC column with fractured longitudinal bars …

Strain-Controlled Cyclic Simple Shear Tests On Sand With Radial Strain Measurements, Xin Kang, Louis Ge, Kuang Tsung Chang, Annie On Lei Kwok

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Strain-controlled cyclic simple-shear tests were performed on silica sand with radial strain measurements. The specimens were tested under a constant K0 condition and subjected to cyclic loading and post cyclic monotonic loading. Threshold cyclic shear strain, volumetric strain, secant shear modulus, and damping ratio are investigated. Generally, the volumetric strain behavior in this study agreed well with literature findings that were investigated using the conventional cyclic direct simple shear test (without radial constraints). Radial strain during monotonic simple shear (post cyclic loading) was found to be a good parameter in monitoring the onset of flow slide in cohesionless soil. The …

An Equivalent Circuit Model For Graphene-Based Terahertz Antenna Using The Peec Method, Ying S. Cao, Li (Lijun) Jun Jiang, Albert E. Ruehli

Electrical and Computer Engineering Faculty Research & Creative Works

The electromagnetic (EM) characterization of graphene under general EM environments is becoming of interest in the engineering and scientific research fields. However, its numerical modeling process is extremely cost prohibitive due to the huge contrast between its thickness and other dimensions. In this work, for the first time, the EM features of graphene are characterized by a circuit model through the partial element equivalent circuit (PEEC) method. The atomically thick graphene is equivalently replaced by an impedance boundary condition. After incorporating the PEEC method, a novel surface conductivity circuit model is derived for graphene. A physical resistor and inductor are …

An Information Exchange Framework Utilizing Smart Buildings For Efficient Microgrid Operation, Jhi Young Joo, Marija D. Ilić

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, we propose an information exchange framework to incorporate smart building demands into a microgrid operation. We especially focus on scheduling smart building demand along with other possibly highly uncertain microgrid generation resources a day ahead or shorter ahead of operation. Since every building demand has different energy consumption profiles and dynamics, it is inefficient for the grid operator to directly control a potentially large number of buildings. On the other hand, if the grid operator does not have sufficient information on the buildings and their resource potentials, smart buildings cannot be deployed to the full extent. Our …

Proportionate Adaptive Filtering For Block-Sparse System Identification, Jianming Liu, Steven L. Grant

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a new family of proportionate normalized least mean square (PNLMS) adaptive algorithms that improve the performance of identifying block-sparse systems is proposed. The main proposed algorithm, called block-sparse PNLMS (BS-PNLMS), is based on the optimization of a mixed norm of the adaptive filter's coefficients. It is demonstrated that both the NLMS and the traditional PNLMS are special cases of BS-PNLMS. Meanwhile, a block-sparse improved PNLMS (BS-IPNLMS) is also derived for both sparse and dispersive impulse responses. Simulation results demonstrate that the proposed BS-PNLMS and BS-IPNLMS algorithms outperformed the NLMS, PNLMS and IPNLMS algorithms with only a modest …

Comparison Of Binary And Multi-Level Logic Electronics For Embedded Systems, Shirly M. Damti, Steve Eugene Watkins, R. Joe Stanley

Electrical and Computer Engineering Faculty Research & Creative Works

Embedded systems are dependent on low-power, miniaturized instrumentation. Comparator circuits are common elements in applications for digital threshold detection. A multi-level, memory-based logic approach is in development that offers potential benefits in power usage and size with respect to traditional binary logic systems. Basic 4-bit operations with CMOS gates and comparators are chosen to compare circuit implementations of binary structures and quaternary equivalents. Circuit layouts and functional operation are presented. In particular, power characteristics and transistor count are examined. The potential for improved embedded systems based on the multilevel, memory-based logic is discussed.

Plasma Processing Of Superconducting Radio Frequency Cavities, Janardan Upadhyay

Physics Theses & Dissertations

The development of plasma processing technology of superconducting radio frequency (SRF) cavities not only provides a chemical free and less expensive processing method, but also opens up the possibility for controlled modification of the inner surfaces of the cavity for better superconducting properties. The research was focused on the transition of plasma etching from two dimensional flat surfaces to inner surfaces of three dimensional (3D) structures. The results could be applicable to a variety of inner surfaces of 3D structures other than SRF cavities. Understanding the Ar/Cl₂ plasma etching mechanism is crucial for achieving the desired modification of Nb …

Optical Nonlocality Induced Zitterbewegung Near The Dirac Point In Metal-Dielectric Multilayer Metamaterials, L. Sun, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Hand Control Of Bipedal Balance In Quiet Standing: Implementations For Lower Extremity Exoskeleton, Ala’A Al-Rashdan

Dissertations

Maintaining stable posture is important for humans, even though it is challenging because of our bipedal structure. One of the main balance related disorders is paraplegia due to spinal cord injury. People with a complete spinal cord injury have motor and sensory impairment that greatly reduces the ability to move their lower extremities. In recent years, lower extremity exoskeletons that apply torques generated by motors to the joints of the person have helped to them stand and walk.

This research is a part of an extended project to build a new exoskeleton for use by individuals with paraplegia due to …

A Dgtd Scheme For Modeling The Radiated Emission From Duts In Shielding Enclosures Using Near Electric Field Only, Ping Li, Yifei Shi, Li (Lijun) Jun Jiang, Hakan Baǧci

Electrical and Computer Engineering Faculty Research & Creative Works

To meet the electromagnetic interference regulation, the radiated emission from device under test such as electronic devices must be carefully manipulated and accurately characterized. Instead of resorting to the direct far-field measurement, in this paper, a novel approach is proposed to model the radiated emission from electronic devices placed in shielding enclosures by using the near electric field only. Based on the Schelkkunoff's equivalence principle and Raleigh-Carson reciprocity theorem, only the tangential components of the electric field over the ventilation slots and apertures of the shielding enclosure are sufficient to obtain the radiated emissions outside the shielding box if the …

Comprehensive Evaluation Of The Effectiveness Of Pedestrian Countdown Signals On Road Users In Michigan, Richard Atta Boateng

Masters Theses

Pedestrian countdown signals (PCSs) are specifically designed to improve pedestrian safety at intersections. Installation of these devices may be with push buttons or without push buttons. Studies have shown that intersections where PCSs with push buttons have been installed have recorded reduction in pedestrian violation as well as reduction in the number of pedestrians trapped in the roadway. Studies have also shown that PCSs may be used by approaching drivers in the same way as other traffic signal anticipation devices such as green signal countdown (GSC). While other signal anticipation devices have been found to benefit drivers, a very limited …

Developing Standard Procedures For Structural Aspects Of Slide-In Bridges In Accelerated Bridge Construction (Abc), Ozan Utku Ridvanoglu

Masters Theses

Slide-in bridge construction (SIBC) is a special method especially used to replace an existing bridge with the minimum duration road closure. In this method, new bridge superstructure is built next to the existing one and it is slid to its final position after demolishing the existing one. Applied implementations of SIBC show that several complications are experienced during bridge slide related with surface interaction. There is a need to evaluate the structural components of SIBC to develop suggestions. In this research, structural components of SIBC were investigated. The research dealt with completed SIBC implementations and numerical modelling of the slide …

Error Mitigation In Rssi-Based Fingerprinting Localization Using Multiple Communication Channels, Francisco Javier Mora-Becerra

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Location data from radio signal strength indication (RSSI) based wireless networks has been used in various applications such as creating smart home behavioral monitoring systems, tracking health care workers for the spread of hospital-associated infections, and providing location-aware tour guide systems. Because RSSI-based systems are inexpensive and can be used with most wireless devices without requiring additional hardware, they are a popular choice for localization. Unfortunately, multipath fading dramatically degrades the performance of an RSSI-based system's ability to locate a target indoors. This thesis endeavors to reduce localization error for RSSI-based fingerprinting localization systems in an indoor environment through frequency …

Introduction To Atomic Requirements, William L. Honig

Computer Science: Faculty Publications and Other Works

An introduction to requirements and the importance of making single atomic requirements statements. Atomic requirements have advantages and improve the requirements process, support requirement verification and validation, enable traceability, support testability of systems, and provide management advantages.

Why has there been so little emphasis on atomic requirements?

Nonlinear Control Of A Thermoacoustic System With Multiple Heat Sources And Actuators, Mikael O. Molina Sandoval

Doctoral Dissertations and Master's Theses

Thermoacoustic instabilities can occur in thermal devices when unsteady heat release is coupled with pressure perturbations. This effect results in excitation of Eigen-acoustic modes of the system. These instabilities can lead to unpredictable behavior of the system. Gas-turbine combustion systems are especially prone to this phenomenon reducing their overall efficiency. Additionally, due to the nature of the combustion, the turbines end up releasing undesired amounts of harmful chemicals to the atmosphere, such as Nitrous Oxide (NOX).

A Rijke tube, representing a resonator with a mean flow and a concentrated heat source, is a convenient system to study the thermoacoustic phenomena. …

A Hybrid Vortex Solution For Surge Margin Enhancement In Axial Compressors, Daniel Port

Doctoral Dissertations and Master's Theses

A new vortex solution to the Simple Radial Equilibrium Equation (SREE) is presented that incorporates endwall effects into the preliminary design stage of a single stage, low pressure compressor with a hub-to-tip ratio of 0.4 and non-axial inlet flow. This vortex solution is proposed to overcome the rapidly approaching asymptotic peak in compressor performance in the industry today. The Hybrid Vortex theory incorporates a versatile, higher-order solution to the SREE, resulting in more accurate preliminary designs requiring less manipulation in the final design stages. This new solution results in significant changes in hub geometry with the stagger of the hub …

Improving Damage Tolerance Of Composite Sandwich Structures Subjected To Low Velocity Impact Loading: Experimental And Numerical Analysis, Ravi B. Gondaliya

Doctoral Dissertations and Master's Theses

Sandwich structures with composite facing skins have seen applications in variety of sectors including aerospace and automobile, owing to their high specific mechanical properties. However, there is a need to develop better damage tolerant sandwich structures since conventional composite facing skins exhibit low impact resistance in the transverse direction. Here, composite skin sandwich structures with three different impact resistant core materials were fabricated and tested both experimentally and numerically. Neat CFRP and 2024-T3 aluminum alloy sheets were also investigated. Cores utilizing impact resistant D3O® were found to have very favorable weight specific energy absorbing properties at higher impact velocities as …

Oscillatory Flow Mechanism For Enhanced Heat Transfer, Sultan Taher Raml

Doctoral Dissertations and Master's Theses

This research project is about the use of an oscillatory flow mechanism to enhance heat transfer. The idea behind this is to induce oscillation of the end wall of one of two connected chambers of a heat exchanger which effectively will induce oscillation of the boundary layer within the connecting duct. The main idea of this thesis came from using species separation studies before 40 years ago in hyperventilation technology to help patients under anesthesia in hospitals. There are many applications for this research such as removing heat from chemical reactors, electrical devices and other enclosed environments such as submarines, …

Data Quality Challenges In Distributed Live-Virtual-Constructive Test Environments, Jeremy R. Millar, Douglas D. Hodson, Gilbert L. Peterson, Darryl K. Ahner

Faculty Publications

Live-Virtual-Constructive (LVC) simulations are complex systems comprising a combination of live (real people operating real equipment), virtual (real people operating simulated equipment or vice versa), and constructive (wholly simulated) entities. Nodes in the system support the simulation of one or more entities and are often geographically distributed to leverage unique assets (e.g., physical test range space or high-fidelity full motion simulators). Abstract excerpt © ACM