Engineering Commons^™

Assessing User Expectations Of Undo In A Multi-User Cad Environment, Jeffrey Eric Nuss

Theses and Dissertations

Undo is a command that users rely on in most software applications. Its importance in multi-user CAD is no different. However, due to its unique nature, users may have different expectations regarding how undo should behave. This research seeks to better understand users' expectations regarding undo in multi-user CAD by having users participate in collaborative design exercises and then asking them how they would expect undo to behave. In addition, users participated in a survey in which they watched 8 videos showing users interacting within multi-user CAD and were then asked about how they would want undo to behave. Based …

The Circuit, Spring 2016, Department Of Electrical And Computer Engineering, Michigan Technological University

Department of Electrical and Computer Engineering Newsletters

Table of Contents:

• Gift Acknowledgements
• Catching up with Professor John Lukowski
• Faculty News
• Institute of Computing and Cybersystems
• Christopher Middlebrook, The Optical Connection
• Lucia Gauchia, Extending Battery Life
• Student News
• Alumni Spotlight
• Swenson Family Legacy
• New Staff

Ag Nanoparticles Generated Using Bio-Reduction And –Coating Cause Microbial Killing Without Cell Lysis, Gade A. Adams, Joan E. Mclean, J. Adams, D. W. Britt, Fenann Shen, A. Jacobson, Y. C. Kim

Civil and Environmental Engineering Faculty Publications

Cost-effective “green” methods of producing Ag nanoparticles (NPs) are being examined because of the potential of these NPs as antimicrobials. Ag NPs were generated from Ag ions using extracellular metabolites from a soil-borne Pythium species. The NPs were variable in size, but had one dimension less than 50 nm and were biocoated; aggregation and coating changed with acetone precipitation. They had dose-dependent lethal effects on a soil pseudomonad, Pseudomonas chlororaphis O6, and were about 30-fold more effective than Ag+ ions. A role of reactive oxygen species in cell death was demonstrated by use of fluorescent dyes responsive to superoxide anion …

Automatic Surface Crack Detection In Concrete Structures Using Otsu Thresholding And Morphological Operations, Sattar Dorafshan, Marc Maguire, Xiaojun Qi

Civil and Environmental Engineering Faculty Publications

Concrete cracking is a ubiquitous phenomenon, present in all types of concrete structures. Identifying and tracking the amount and severity of cracking is paramount to evaluating the current condition and predicting the future service life of a concrete asset. Concrete cracks can indicate reinforcement corrosion, the development of spalls or changing support conditions. Therefore, monitoring cracks during the life span of concrete structures has been an effective technique to evaluate the level of safety and preparing plans for future appropriate rehabilitation.

One growing technique are unmanned inspections using Unmanned Aerial Vehicles (UAV). UAVs are drones equipped with cameras, sensors, GPS, …

Simple Adaptive Delta Operator Aircraft Flight Control For Accommodation Of Loss Of Control Effectiveness, Alfredo Cano, Kenneth Sobel

Publications and Research

A new proof for stability of delta operator simple adaptive control is presented in terms of a set of Linear Matrix Inequalities (LMIs). The paper shows how to design a feedforward gain to satisfy the LMIs over a polytope of loss of control effectiveness failures. The MATLAB Robust Control Toolbox is used to find the feedforward gain with the smallest norm that satisfies the LMIs. Examples are presented of the F/A-18 aircraft and the Innovative Control Effectors (ICE) tailless aircraft that show the design of a feedforward gain for a loss of control effectiveness in any one control effector. The …

Droplet Impingement On Superhydrophobic Surfaces, Cristian Esteban Clavijo Angeles

Theses and Dissertations

This dissertation explores the physics of droplet impingement on superhydrophobic surfaces. The research is divided in three categories. First, the effect of a slip boundary condition on droplet spreading/retracting is considered. A model is developed based on energy conservation to evaluate spreading rates on surfaces exhibiting isotropic and anisotropic slip. The results show that larger slip causes the droplet to spread out farther owing to reduced friction at the interface for both slip scenarios. Furthermore, effects of slip become magnified for large Weber numbers due to the larger solid-liquid contact area during the process. On surfaces with anisotropic slip, droplets …

Risk Management In A Vuca Environment: Some Key Considerations, Foo S.L., Nam Sang Cheng, Nam Sang Cheng

Research Collection School Of Accountancy

Whatis VUCA? Why is it relevant to accountants, the C-suites and Board ofDirectors? Companies are in the business of taking risks for rewards. Situatedbetween the companies are in the business of taking risks for rewards. Situatedbetween the companies and the rewards are risks. Critical concepts in thisprocess are volatility, uncertainty, complexity, and ambiguity (VUCA), a trendymanagerial acronym that conflates the reality of the business environment and the challenges ofrisk management.

Assembly Of A 3d Cellular Computer Using Folded E-Blocks, Shivendra Pandey, Nicholas J. Macias, Carmen Ciobanu, Changkyu Yoon, Christof Teuscher, David H. Gracias

Electrical and Computer Engineering Faculty Publications and Presentations

The assembly of integrated circuits in three dimensions (3D) provides a possible solution to address the ever-increasing demands of modern day electronic devices. It has been suggested that by using the third dimension, devices with high density, defect tolerance, short interconnects and small overall form factors could be created. However, apart from pseudo 3D architecture, such as monolithic integration, die, or wafer stacking, the creation of paradigms to integrate electronic low-complexity cellular building blocks in architecture that has tile space in all three dimensions has remained elusive. Here, we present software and hardware foundations for a truly 3D cellular computational …

Long-Term Quantitative Study Of Wind-Tunnel Balance Calibrations Across Multiple Calibration Systems, Ryan James Callahan

Mechanical & Aerospace Engineering Theses & Dissertations

Internal strain-gauge balances are multi-dimensional force transducers widely employed in wind tunnels to obtain accurate aerodynamic force and moment data on an aircraft model. Balances are calibrated periodically to assure measurement accuracy. The calibration provides a mathematical model relating the forces applied to the balance and the output signal from the balance. Currently, there are multiple types of internal strain-gauge balances used in wind-tunnel testing as well as multiple methods by which balances are calibrated. Because of the differences in the hardware and methodologies used to calibrate a wind-tunnel balance, it is hard to quantify the differences seen between the …

Education For Sustainable Development- The Irish Construction Sector And The Need For A Sustainable Approach, Conor Mcmanus

Masters

This study explores the path to be taken towards achieving Sustainable Development. It examines the impact the construction industry has on the environment as a result of a knowledge and skills gap and considers how our present way of thinking facilitates this. It then goes on to show how a change in construction education can bring about change in the industry and facilitate the implementation of sustainable development. The study examines how the singular emphasis on technology, the introduction of the ‘expert’ into the domestic building process and the narrow focus on operational energy conservation raises questions about Ireland's present …

Application Of Qual2k Model To Macrophyte Rich Silver Bow Creek, Dylan Uecker

Graduate Theses & Non-Theses

Silver Bow Creek (SBC, Blacktail Creek to Warm Springs Creek) is a small urbanized stream in western Montana (MT) identified as impaired for nitrate, total nitrogen and total phosphorus on the 2014 303(d) list. Enrichment of SBC occurs primarily from a single municipal point source that results in excessive primary production, macrophyte growth, large diel waterquality swings, and nightly hypoxic conditions that likely impair aquatic life uses. The objective of this study is to apply QUAL2K (a surface water-quality model) to a 5.6 km long reach of SBC to predict in-stream dissolved oxygen (DO) concentrations under different nutrient loading scenarios. …

The Anisotropy Of Hexagonal Close-Packed And Liquid Interface Free Energy Using Molecular Dynamics Simulations Based On Modified Embedded-Atom Method, Ebrahim Asadi, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

This work aims to comprehensively study the anisotropy of the hexagonal close-packed (HCP)-liquid interface free energy using molecular dynamics (MD) simulations based on the modified-embedded atom method (MEAM). As a case study, all the simulations are performed for Magnesium (Mg). The solid-liquid coexisting approach is used to accurately calculate the melting point and melting properties. Then, the capillary fluctuation method (CFM) is used to determine the HCP-liquid interface free energy (γ) and anisotropy parameters. In CFM, a continuous order parameter is employed to accurately locate the HCP-liquid interface location, and the HCP symmetry-adapted spherical harmonics are used to expand γ …

Application Of A Multi-Zone Model For The Prediction Of Species Concentrations In Rapid Compression Machine Experiments, David Wilson

Master's Theses (2009 -)

Accurate chemical kinetic models, which predict species evolution and heat release rates in chemically reactive systems, are essential for further advancements in fuel and combustion technology. An experimental facility that is widely used for evaluating the accuracy of kinetic models is a rapid compression machine (RCM), which creates a well-defined reaction environment by compressing a reactive mixture inside a chamber. Generally, RCM experiments are conducted in order to obtain ignition delay data. However, chemical speciation data provides greater insight into reaction pathways, and is therefore a more rigorous benchmark for validating kinetic models. In order for a chemical kinetic model …

A Principal Component Analysis Investigation Of Drop Landings For Defining Anterior Cruciate Ligament Injury Risk Factors, Emily Schaefer

Master's Theses (2009 -)

Injury to the anterior cruciate ligament (ACL) has been widely investigated through observational video analysis and laboratory based cadaveric, motion capture and computer simulation models. With the greater incidence of injury in the female population, recent emphasis has been placed on understanding ACL injury mechanisms in females. By using our understanding of injury mechanisms and prospective studies, injury prediction methods can be created. Once injury can be reliably predicted, training methods can be implemented to reduce likelihood of injury and avoid devastating consequences. There is a need for a reliable way to reduce motion capture data obtained in a laboratory …

Cyclic Behavior Of A Hybrid Light Gauge And Hss Mezzanine Structural System, Michael John Kren

Master's Theses (2009 -)

Cold-formed steel is emerging as an alternative material in the building industry to hot-rolled steel for smaller buildings and indoor structures also called mezzanines. Cyclic testing of a full-scale mezzanine structures composed of cold-formed structural channel beams connected to hollow structural steel (HSS) columns cap plates using wedge expansion anchors at the base plate to generate rotation restraint, is performed in this research. The characteristics of the structure will be explained by displaying full experimental results of structural testing. Unfortunately, limited experimental data outlining the behavior of these structures is available and design criteria is very limited. Thus, there is …

Modeling And Investigation Of Refrigeration System Performance With Two-Phase Fluid Injection In A Scroll Compressor, Rui Gu

Master's Theses (2009 -)

Vapor compression cycles are widely used in heating, refrigerating and air-conditioning. A slight performance improvement in the components of a vapor compression cycle, such as the compressor, can play a significant role in saving energy use. However, the complexity and cost of these improvements can block their application in the market. Modifying the conventional cycle configuration can offer a less complex and less costly alternative approach. Economizing is a common modification for improving the performance of the refrigeration cycle, resulting in decreasing the work required to compress the gas per unit mass. Traditionally, economizing requires multi-stage compressors, the cost of …

Least-Squares Mapping From Kinematic Data To Acoustic Synthesis Parameters For Rehabilitative Acoustic Learning, Xiangyu Zhou

Master's Theses (2009 -)

Thousands of people suffer from dysarthria resulting from neurological injury of the motor component of the motor-speech system, and need to rely on alternative methods to communicate in daily life, such as body language or text-to-speech [1] . However, there are currently very few effective rehabilitative therapies for helping these patients improve their speech. Because of this, research is needed to develop better rehabilitative therapies. One such area of research is the use of involuntary acoustic learning. The Speech and Swallowing lab at Marquette University has an Electromagnetic Articulography (EMA) system to collect kinematic data and a software system called …

Nonlinear Flight Control Design Using Backstepping Methodology, Thanh Trung Tran

Mechanical & Aerospace Engineering Theses & Dissertations

The subject of nonlinear flight control design using backstepping control methodology is investigated in the dissertation research presented here. Control design methods based on nonlinear models of the dynamic system provide higher utility and versatility because the design model more closely matches the physical system behavior. Obtaining requisite model fidelity is only half of the overall design process, however. Design of the nonlinear control loops can lessen the effects of nonlinearity, or even exploit nonlinearity, to achieve higher levels of closed-loop stability, performance, and robustness. The goal of the research is to improve control quality for a general class of …

Thin Film Studies Toward Improving The Performance Of Accelerator Electron Sources, Md Abdullah Al Mamun

Mechanical & Aerospace Engineering Theses & Dissertations

Future electron accelerators require DC high voltage photoguns to operate beyond the present state of the art to conduct new experiments that require ultra-bright electron beams with high average current and higher bunch charge. To meet these demands, the accelerators must demonstrate improvements in a number of photogun areas including vacuum, field emission elimination in high voltage electrodes, and photocathodes. This dissertation illustrates how these improvements can be achieved by the application of suitable thin-films to the photogun structure for producing ultra-bright electron beams.

This work is composed of three complementary studies. First, the outgassing rates of three nominally identical …

Experimental Investigation Of Turbulent Structures And Non-Equilibrium Effects In Axial Wake Vortices Via Particle Image Velocimetry, Jeffry William Ely

Mechanical & Aerospace Engineering Theses & Dissertations

Vortices are a common phenomenon in fluid flows that arise as kinetic energy dissipates into heat via viscous interaction. They arise naturally at large scales in the form of dust devils, tornadoes, and as a counter-rotating vortex pair in the wake of aircraft. It is important to understand the conditions leading to their formation, their duration, and their dissipation in order to forecast or prevent undesirable effects. Among these deleterious effects is a decrease in safety of aircraft operations in the wake of other aircraft, an extremely common situation at airports around the world. A large number of mathematical models …

Concurrent Spatial Mapping Of The Viscoelastic Behavior Of Heterogeneous Soft Materials Via A Polymer-Based Microfluidic Device, Wenting Gu

Mechanical & Aerospace Engineering Theses & Dissertations

This dissertation presents a novel experimental technique, namely concurrent spatial mapping (CSM), for measuring the viscoelastic behavior of heterogeneous soft materials via a polymer-based microfluidic device. Comprised of a compliant polymer microstructure and an array of electrolyte-enabled distributed resistive transducers, the microfluidic device detects both static and dynamic distributed loads. Distributed loads deform the polymer microstructure and are recorded as resistance changes at the locations of the transducers.

The CSM technique identifies the elastic modulus of soft materials by applying a precisely controlled indentation depth using a rigid probe to a sample placed on the device. The spatially-varying elastic modulus …

Modeling Shock Waves Using Exponential Interpolation Functions With The Least-Squares Finite Element Method, Bradford Scott Smith Jr.

Mechanical & Aerospace Engineering Theses & Dissertations

The hypothesis of this research is that exponential interpolation functions will approximate fluid properties at shock waves with less error than polynomial interpolation functions. Exponential interpolation functions are derived for the purpose of modeling sharp gradients. General equations for conservation of mass, momentum, and energy for an inviscid flow of a perfect gas are converted to finite element equations using the least-squares method. Boundary conditions and a mesh adaptation scheme are also presented. An oblique shock reflection problem is used as a benchmark to determine whether or not exponential interpolation provides any advantages over Lagrange polynomial interpolation. Using exponential interpolation …

Secondary Electron Emission From Plasma Processed Accelerating Cavity Grade Niobium, Miloš Bašović

Mechanical & Aerospace Engineering Theses & Dissertations

Advances in the particle accelerator technology have enabled numerous fundamental discoveries in 20th century physics. Extensive interdisciplinary research has always supported further development of accelerator technology in efforts of reaching each new energy frontier.

Accelerating cavities, which are used to transfer energy to accelerated charged particles, have been one of the main focuses of research and development in the particle accelerator field. Over the last fifty years, in the race to break energy barriers, there has been constant improvement of the maximum stable accelerating field achieved in accelerating cavities. Every increase in the maximum attainable accelerating fields allowed for higher …

Synthesis, Morphological Control, Dispersion Stabilization And In Situ Self-Assembly Of Noble Metal Nanostructures Using Multidentate Resorcinarene Surfactants, Sangbum Han

Chemistry & Biochemistry Theses & Dissertations

In this dissertation, a detailed investigation on the influence of various macrocyclic resorcinarene surfactants in determining the morphology, stabilization and self-assembly of mono- and bi- metallic nanoparticles was undertaken. Chapter 2 describes the influence of resorcinarene surfactants functionalized with amine- and thiol- headgroups in determining the morphology of monometallic Pt nanoparticles synthesized via the Brust-Schiffrin reaction. We found that while resorcinarene benzylthiol can lead to the formation of highly branched Pt nanostructures, resorcinarene amine can lead to the formation of anisotropic crystalline Pt nanoparticles. Further, we have evaluated the influence of resorcinarene ligands in determining the catalytic activity of these …

A Comparison Of American, Norwegian, And Russian Standards In Calculating The Wall Thickness Of Submarine Gas Pipeline, Cindy Dianita, Tatyana Vladimirovna Dmitrieva

Makara Journal of Technology

One of the key issues in the pipeline design is wall thickness calculation. This paper highlights a comparison of wall thickness calculation methods of submarine gas pipeline based on Norwegian Standard (DNV-OS-F101), Indonesian Standard SNI 3474 which refers to American Standard (ASME B31.8), and Russian Standard (VN39-1.9-005-98). A calculation of wall thickness for a submarine gas pipeline in Indonesia (pressure 12 MPa, external diameter 668 mm) gives the results of 18.2 mm (VN39-1.9-005-98), 16 mm (ASME B31.8), and 13.5 mm (DNV-OS-F101).The design formula of hoop stress due to internal pressure is interpreted in different ways for every standard. Only Norwegian …

Optimal Schedules In Multitask Motor Learning, Jeong Yoon Lee, Youngmin Oh, Sung Shin Kim, Robert A. Scheidt, Nicolas Schweighofer

Biomedical Engineering Faculty Research and Publications

Although scheduling multiple tasks in motor learning to maximize long-term retention of performance is of great practical importance in sports training and motor rehabilitation after brain injury, it is unclear how to do so. We propose here a novel theoretical approach that uses optimal control theory and computational models of motor adaptation to determine schedules that maximize long-term retention predictively. Using Pontryagin’s maximum principle, we derived a control law that determines the trial-by-trial task choice that maximizes overall delayed retention for all tasks, as predicted by the state-space model. Simulations of a single session of adaptation with two tasks show …

Smokey: Ubiquitous Smoking Detection With Commercial Wifi Infrastructures, Xiaolong Zheng, Jiliang Wang, Longfei Shangguan, Zimu Zhou, Yunhao Liu

Research Collection School Of Computing and Information Systems

Even though indoor smoking ban is being put into practice in civilized countries, existing vision or sensor-based smoking detection methods cannot provide ubiquitous smoking detection. In this paper, we take the first attempt to build a ubiquitous passive smoking detection system, which leverages the patterns smoking leaves on WiFi signals to identify the smoking activity even in the non-line-of-sight and through-wall environments. We study the behaviors of smokers and leverage the common features to recognize the series of motions during smoking, avoiding the target-dependent training set to achieve the high accuracy. We design a foreground detection based motion acquisition method …

Tuning By Turning: Enabling Phased Array Signal Processing For Wifi With Inertial Sensors, Kun Qian, Chenshu Wu, Zheng Yang, Zimu Zhou, Xu Wang, Yunhao Liu

Research Collection School Of Computing and Information Systems

Modern mobile devices are equipped with multiple antennas, which brings various wireless sensing applications such as accurate localization, contactless human detection and wireless human-device interaction. A key enabler for these applications is phased array signal processing, especially Angle of Arrival (AoA) estimation. However, accurate AoA estimation on commodity devices is non-trivial due to limited number of antennas and uncertain phase offsets. Previous works either rely on elaborate calibration or involve contrived human interactions. In this paper, we aim to enable practical AoA measurements on commodity off-the-shelf (COTS) mobile devices. The key insight is to involve users’ natural rotation to formulate …

The Predictive Relationship Between Specific Teacher Characteristics And The Perceived Sense Of Teacher Self-Efficacy Of Non-Native English Speaking Teachers Of English As A Foreign Language In Rural Thailand, Cheri Crook

Doctoral Dissertations and Projects

The goal of this quantitative, predictive correlational study is to investigate an often overlooked area of research, teacher self-efficacy among nonnative English-speaking teachers (NNESTs) who teach English as a Foreign Language (EFL). This study examines the relationship between specific teacher characteristics and perceived teacher self-efficacy among NNESTs of EFL in rural Thailand. The convenience sample in this study includes first through twelfth grade public sector NNESTs of EFL in Nan, Thailand, and represents the larger population of Northern Thai NNESTs of EFL. Data were collected from the sample via a combined Thai-language version of the paper-based Teachers’ Sense of Efficacy …

Spring 2016 Biomedical Engineering Newsletter, Department Of Biomedical Engineering, Michigan Technological University

Department of Biomedical Engineering Newsletters

Table of Contents

• Focus on Cardiovascular Research
• BMES Rising Star Feng Zhao
• Magnetoelastic: Sensing more with less
• Portage Health/Michigan Tech Partnership
• Remembering Dr. Michael Neuman