Effects Of Corrosion Inhibitor On The Corrosion Behavior Of Low Carbon Steel In Co2 Environment, Michael Harris

Williams Honors College, Honors Research Projects

The effectiveness of Benzalkonium chloride (C14) as a corrosion inhibitor for mild steel in an aqueous CO₂ environment was studied for dual use. It is a known biocide and currently untested corrosion inhibitor. Potentiodynamic polarization was used to determine the anodic and cathodic reaction kinetics through analysis of the potentiodynamic curves and the corrosion current densities. Electrochemical impedance spectroscopy (EIS) was utilized to analyze the surface characteristics through analysis of the Nyquist and Bode plots. C1010 and C1018 mild steel were tested in a 200mL jacketed Gamery cell, and purged with CO₂ (99.9%). Temperature effects were studied and …

Lighted Ear Curette, Kaitlin Klotzle, Kelsey Ashmore, Crysta Yamamoto, Katrina Elfrink, Cynthia Stoller

Williams Honors College, Honors Research Projects

The ear canal is a sensitive and small part of the human body that is prone to accumulate cerumen or lodge foreign bodies. In order to clean the ear canal or remove foreign bodies, three hands are required: one to brace the patient's head, one to maneuver the curette that is used to clean the ear, and one to hold a light source in order to make the small, dark area visible. Therefore, a design is needed that can allow a doctor to safely clean an ear with an instrument that only requires two hands. Furthermore, the design must have …

Water Jet Cutting Head Actuator, Jacob D. Augustynovich

Williams Honors College, Honors Research Projects

In an effort to increase efficiency and productivity, WARDJet was seeking a better actuation method for the cutting head on their waterjets. Current actuation methods were, for the most part, purely mechanical, relying on compressed air, springs, and water pressure to open and close the valve to 60,000 psi of water. Increasing the speed of the on/off cycle times of the waterjet would allow for faster movements of the cutting head from one cut to the next, increasing the overall amount of products cut in a day, week, and year. This obviously points to increased sales, increased profit, and increased …

Wardjet Waterjet Cutting Head Actuator Design, Micah Steiner, Jacob D. Augustynovich, Benjamin Heckert

Williams Honors College, Honors Research Projects

In an effort to increase efficiency and productivity, WARDJet was seeking a better actuation method for the cutting head on their waterjets. Current actuation methods were, for the most part, purely mechanical, relying on compressed air, springs, and water pressure to open and close the valve to 60,000 psi of water. Increasing the speed of the on/off cycle times of the waterjet would allow for faster movements of the cutting head from one cut to the next, increasing the overall amount of products cut in a day, week, and year. This obviously points to increased sales, increased profit, and increased …

The Design And Testing Of A High Performance Formula Sae Powertrain, Ryan T. Harty

Williams Honors College, Honors Research Projects

Every year the Society of Automotive Engineers (SAE) tasks collegiate students with designing, constructing, testing, and competing with an open wheel formula style racecar. This vehicle has to meet stringent technical requirements that are provided in a rule book published by SAE. The Formula SAE (FSAE) rule book is a very comprehensive set of requirements that are centered on safety of the driver of the vehicle and the safety of the track workers. The students are required to read and understand the rulebook in order to use sound engineering practices to build not only a high performing vehicle but a …

Smart Fitness Machine, Tyler M. Masters

Williams Honors College, Honors Research Projects

This paper details the design of a smart fitness machine that, by the use of sensors and a central micro controller, tracks an individual users exercise performance data and provides a platform for the data to be easily accessed either by the trainer or user.

Optimization Of Acoustic Soundboard Through Modal Analysis And Material Selection, Noah C. Nicholas, Cody Gruber, Nicholas Hartman

Williams Honors College, Honors Research Projects

The purpose of this design project was to determine if it is plausible to design an acoustic top plate assembly made of a non-traditional material which is equivalent in sound quality to that of a standard wooden guitar. Since wood must be crafted by skilled luthiers, the overall cost of producing the completed product is fairly high. To reduce the cost of a finished acoustic guitar, we proposed to alter the material to that of one that is easier to manufacture, such as plastics and composites.

Based on our research, our team chose to test both ABS plastic and carbon …

Stringless Guitar, Kue Z. Yang, Anthony Batey, Dominic Mercorelli, Nathaniel Hawk

Williams Honors College, Honors Research Projects

The aim of this project is to improve the design of a typical guitar by designing a digital stringless guitar. Due to the nonlinearities inherent in a guitar, it would be difficult to reproduce guitar tones by summing harmonic components; therefore, digital samples of guitar tones were taken in order to preserve these unique and wonderfully sounding tones. These digital samples were stored in the guitar and used to produce its tones when played. The digital guitar includes fingerboard position sensors as well as strum sensors for each string. The fingerboard position sensors detect the player’s fingers at discrete positions. …

Study Of Experimentally Blended Wings, Ray Roos 2894888

Williams Honors College, Honors Research Projects

This aim of this senior design project is to investigate the combination of a Selig 1223 and FX 74-CL5-140 into one profile to increase lift without significantly increasing drag. Our project began with researching current solutions for high lift and low drag airfoils. We found two airfoils which would be the target of our research, a Selig 1223 and the FX 74-CL5-140. After learning about the Cl and Cd of the current airfoils we built and physically tested the airfoils using additive manufacturing. A pressure differential tunnel was used to validate the airfoils. After researching how to blend two airfoil …

Rubber Additives To Concrete Specimens, Kendall J. Sweitzer, Mary Mccannon

Williams Honors College, Honors Research Projects

Rubber, as an additive to concrete, would hypothetically cause a concrete specimen to take on some mechanical characteristics of the rubber to a certain degree. In particular, the concrete’s durability should increase when exposed to fluctuating temperature conditions due to the rubber additive. This experiment sets out to test crumb rubber as a concrete additive, cured under various atmospheric conditions. The effects shall be measured via a simple concrete compression test.

Unfortunately, several errors took place during experimental process that led to inconclusive results. However, it can be reasonably considered from testing Matrix One that the addition of crumb rubber …

Swagelok's Hand Tube Bender, Chapin Hutama, Seth Bills, William Mcconnell, Tyler Brown

Williams Honors College, Honors Research Projects

In our project, we are assigned to develop a hand tube bender that is able to bend medium, high pressure, and standard 1/4” and 3/8” tubing. The bender also shall be capable of being used with two hands without the aid of a bench vise and have provisions for use in a bench vise for convenience. The bender shall not damage the tube during bending and induce a maximum of 8% ovality in the bent tubing. In addition, the cost of the bender shall be less than the existing hand tube bender and be resistant to rusting from ordinary use. …

Evaluation Of Epoxy Coatings For Protecting Aluminum Alloy 2024 From Corrosion Caused By Aspergillus Niger, Kamshat Dukenbaeva

Williams Honors College, Honors Research Projects

The aim of this study was to assess the potentials of using epoxy coatings for the prevention of fungus-induced corrosion. The metal specimen of interest was the aluminum alloy AA 2024-T3. The main intent was to evaluate the behavior of the organic acid producing fungus, Aspergillus niger (A. niger), towards the epoxy-coated aluminum. Two different types of epoxy coatings were used: a two-part resin and a commercially-available Rust-Oleum Specialty Appliance Epoxy. Due to challenges encountered throughout the length of the project and time constraints, limited quantitative data was obtained. However, from optical and visual data it can be concluded that …

Controlled Humidity Chambers To Maintain Red Roses’ Freshness And Improve Their Shelf Life, Rima Vasudevan

Williams Honors College, Honors Research Projects

Floriculture is the third largest agricultural crop in the United States of America. Flowers are usually transported in pots of mud or with the roots still submerged in water to increase their shelf life and ensure freshness during long hours of transport. This not only increases the weight of the transport materials but also makes the process expensive.

The research conducted provides the first stages of an alternative packaging material that can lower the weight of transport materials and maintain the freshness of the flowers. The experiments conducted in this work support the hypothesis that using controlled high (>60%) …

Forget-Me-Not, Daniel Barber-Cironi, Shawn Nicholson, Jake Kruse, Nicole Dent

Williams Honors College, Honors Research Projects

The purpose of Forget-Me-Not is to provide another level of care and comfort to those suffering from mild dementia, as well as provide further assistance for a friend, family member, or caretaker who may look after them. Research shows that timely reminders and persistent information can greatly improve the quality of life for those afflicted with mild dementia (Mokhtari et al.). Forget-Me-Not’s persistent display and wearable smart-bracelet offer a customizable and well connected system to provide these reminders. For the caretaker, a mobile application is provided in order to maintain the display and notify them of emergencies or critical events …

Design And Construction Of An Optimum Method To Present Uncertainty Of Convective Weather Forecasts To Air Traffic Personnel, Anna K. Selchow, Austin Wright

Williams Honors College, Honors Research Projects

The purpose of this design project was to develop a new weather display for air traffic controllers to utilize that shows the probabilistic hazard information for convective weather forecasts. Multiple iterations of maps were generated and evaluated for overall effectiveness in conveying uncertainty information for convective weather observations and forecasts with the final maps being tested through interviews with retired air traffic personnel. The goal of these maps was to improve upon current convective weather displays to more accurately show uncertainty and probabilistic hazard information to aid the air traffic controllers (ATCs) in providing guidance for aircraft pilots.

Underwater Robot, Joseph E. Beck, Matthew Crislip, Cody Bobek, Peyton Lucas

Williams Honors College, Honors Research Projects

Remotely Operated Vehicles (ROVs) are remote controlled drones operated by a non-local user. The ROV we plan to build is connected by a tethering wire to a floating buoy that contains an antenna which will send signals between the base station and the ROV. The ROV is equipped with a video camera, ballast system, propulsion system, lights, and a depth sensor. The ROV will transmit a live video feed to the user, while receiving input signals to control its movement from the base station.

Augmented Reality Helmet, Kevin Kapko

Williams Honors College, Honors Research Projects

Cyclists need a detection method for vehicles to help prevent accidents and a method to display exercise data in order to maximize their workout. An array of sensors paired with a display allows a cyclist to be notified of workout information and any surrounding traffic. A smartphone app calculates the information from the sensors and sends the calculations to the display. This will allow the user to be able to see their exercise information without disrupting their bike ride as well as give some measure of safety to the cyclist when sharing the street with cars.

Analysis And Sensitivity Study Of Zero-Dimensional Modeling Of Human Blood Circulation Network, Roussel Rahman

Browse all Theses and Dissertations

The systemic circulation has a large number of vessels; therefore, 3-D simulation of pulse-wave propagation in the entire cardiovascular system is difficult and computationally expensive. Zero-Dimensional (Zero-D) and One-Dimensional (1-D) models are simplified representations of the cardiovascular network; they can be coupled as supplements to regional 3-D models for closed-loop multi-scale studies or be simulated as self-sufficient representations of the blood-flow network. Unlike Zero-D models, 1-D models can provide linear space-wise information for the vessels. However, Zero-D models can prove to be more useful in particular cases; as flexibility in adjusting parameters facilitate in tailoring the model to specific needs. …

Gnss Receiver Testing And Algorithm Development, Rachael E. Kolker

Browse all Theses and Dissertations

Many current GNSS Software Defined Receivers (SDRs) are often limited in what they can do across a range of developmental applications. They cannot perform acquisition and tracking without several iterations of coding, which does not allow for fast processing. This work provides a Matlab SDR that is based on freely available and optimized components that can be applied to all GNSS signals. A previous basis has been expanded upon to perform tracking of QZSS signals. In addition to this, two separate hardware front ends were compared and their differences analyzed. These hardware systems collected data with different disciplining clocks, but …

An Investigation On The Stress Intensity Factor Of Surface Micro-Cracks, Sirisha Divya Arli

Browse all Theses and Dissertations

The contact fatigue failure in the form of micro or macro-scale pitting is an important failure mode for rolling mechanical elements, such as bearings and gears that are widely used in the automotive, aerospace and wind turbine fields. The micro-pitting process in some cases, gradually removes the surface material through fatigue wear, altering the geometry of the contact surfaces to alleviate the contact pressure decelerating the continued pitting rate. The propagation of the micro-cracks in other cases, goes deep into the material along a shallow angle, turns parallel to the surface at a certain depth, where the maximum shear or …

Semantics-Based Summarization Of Entities In Knowledge Graphs, Kalpa Gunaratna

Browse all Theses and Dissertations

The processing of structured and semi-structured content on the Web has been gaining attention with the rapid progress in the Linking Open Data project and the development of commercial knowledge graphs. Knowledge graphs capture domain-specific or encyclopedic knowledge in the form of a data layer and add rich and explicit semantics on top of the data layer to infer additional knowledge. The data layer of a knowledge graph represents entities and their descriptions. The semantic layer on top of the data layer is called the schema (ontology), where relationships of the entity descriptions, their classes, and the hierarchy of the …

One Dimensional Computer Modeling Of A Lithium-Ion Battery, Ashwin S. Borakhadikar

Browse all Theses and Dissertations

Renewable energy storage is vitally important to many applications for which batteries are the finest choice. As energy storage technology may be applied to a number of areas that differ in power and energy requirements, modeling of battery performance is required. In recent years, a lot of research has been done in this area but, the earliest model was designed by Marc Doyle, T. F. Fuller, and J. Newman in 1993. This work involves the development of a one-dimensional computer model of a lithium-ion battery which consists of three domains: the negative electrode, the separator, and the positive electrode. The …

Analytical-Based Methodologies To Examine In Vitro Nanokinetics Of Silver Nanoparticles, Sesha Lakshmi Arathi Paluri

Browse all Theses and Dissertations

Advancements in the nanotechnology have taken a huge leap in 21st century resulting in 1814 consumer products containing nanomaterials. About 47% of these products belong to the health and fitness sector and ~24% utilize silver nanoparticles (AgNPs). Despite the promising biomedical applications of AgNPs (e.g. bone cements, contrasting agents, and drug-carriers), lack of standardized methods for examining their nanokinetics (i.e., Absorption, Distribution, Metabolism, and Elimination (ADMEs)) limit their clinical implementation. The current work addresses this knowledge gap by developing analytical-based approaches for studying in vitro ADMEs of AgNPs. To demonstrate the versatility of these methodologies, two in vitro kidney study …

Plasma Property Estimation From Dual-Wavelength Interferometry, Andrew J. Hamilton

Browse all Theses and Dissertations

Diagnostics are necessary for measurement of plasma parameters such as electron, ion and atomic densities, electron temperature, plasma expansion velocity and spatial resolution of density gradients. These parameters play a critical role in defining how a plasma will interact with electromagnetic radiation. For example, the plasma black-out phenomenon occurs when electromagnetic waves are at frequencies below the plasma frequency, where plasma frequency is a function of electron density. Wave propagation diagnostics can improve understanding of a plasma when measurement supports parameter estimation. In this report, the dual-wavelength interferometry method provides a single diagnostic capability to measure plasma expansion velocity, atomic …

Incorporating Passive Compliance For Reduced Motor Loading During Legged Walking, Akhil Sai Pabbu

Browse all Theses and Dissertations

For purposes of travelling on all-terrains surfaces that are both uneven and discontinuous, legged robots have upper-hand over wheeled and tracked vehicles. The robot used in this thesis is a simulated hexapod with 3 degrees of freedom per leg. The main aim is to reduce the energy consumption of the system during walking by attaching a passive linear spring to each leg which will aid the motors and reduce the torque required while walking. Firstly, the ideal stiffness and location or the coordinates for mounting the spring is found out using gradient based algorithm called `Simultaneous Perturbation and Stochastic Approximation …

Implicit Leadership And Followership Theories: Does Congruency Matter?, Daniel Bashore

Browse all Theses and Dissertations

Leadership research largely has ignored the extent to which followers influence leaders and the leadership process. Even fewer studies have examined the effect of Implicit Leadership Theories (ILTs) and Implicit Followership Theories (IFTs) on performance and affective outcomes. In prior research, there is an implicit assumption that ILTs and IFTs are compatible, but little research has examined the presence of incongruent ILTs and IFTs and potential effects incongruence might have on organizational outcomes. The current study examined the effect of ILT/IFT congruence on organizational outcomes (performance, satisfaction, and perceived leader effectiveness) in two different samples: a student sample (N = …

Implementation And Evaluation Of Goal Selection In A Cognitive Architecture, Sravya Kondrakunta

Browse all Theses and Dissertations

A cognitive system attempts to achieve its goals by utilizing the appropriate resources present to yield the best possible outcome within a short duration. To achieve the goals in such an efficient manner, it is important for the agent to manage its goals well. Goal management not only makes the agent efficient but also flexible, more durable to the sudden changes in the environment, and self-reliant. Goal Management consists of various goal operations including goal formulation, selection, change, delegation, achievement, and monitoring. Each operation is unique and has its own significance in aiding the performance of the agent. The thesis …

Estimating Channel Identification Quality In Passive Radar Using Lms Algorithms, Michael J. Callahan

Browse all Theses and Dissertations

Passive bistatic radar can be an attractive choice relative to monostatic radar because it provides the ability to operate covertly; immunity to jamming and interference; the ability to operate outside of traditional radar bands; and reduced cost. The benefits of noise waveforms versus classic radar waveforms such as linear frequency modulation (LFM) are discussed in the literature. Noise waveforms, with their thumbtack ambiguity functions, are ideal for use in non-cooperative passive radar. Since many digital waveforms are randomized to make their spectra approximately white, noise-like waveforms may be readily available for opportunistic use by non-cooperative passive radar receivers. For instance, …

Dynamic Modeling Of Thermal Management System With Exergy Based Optimization, Marcus J. Bracey

Browse all Theses and Dissertations

System optimization and design of aircraft is required to achieve many of the long term objectives for future aircraft platforms. To address the necessity for system optimization a vehicle-level aircraft model has been developed in a multidisciplinary modeling and simulation environment. Individual subsystem models developed exclusively in MATLAB-SimulinkTM, representing the vehicle dynamics, the propulsion, electrical power, and thermal systems, and their associated controllers, are combined to investigate the energy and thermal management issues of tactical air vehicle platforms. A thermal vehicle level tip-to-tail model allows conceptual design trade studies of various subsystems and can quantify performance gains across the aircraft. …

Ab Initio Study Of The Effects Of Humidity On Perovskite Based Hybrid Solar Cell Interfaces, Shantanu Rajendra Rachalwar

Browse all Theses and Dissertations

Despite the impressive success of perovskite-based hybrid solar cells, their widespread usage has been limited partially owing to stability issues under working environmental conditions. Among these, the effects of humidity are some of the most significant. Water intercalation generally degrades the material, shortens its useful life, and reduces the efficiency of photovoltaic energy conversion. Understanding the reasons for these effects can be achieved through detailed and accurate atomic-scale analysis. Here, we study water intercalation at the interfaces of perovskite-based hybrid solar cell material and TiO2 electrode. Accurate ab initio computer simulations are used to obtain structural and electronic properties. We …