Engineering Commons^™

Biomaterials Approaches For Utilizing The Regenerative Potential Of The Peripheral Nerve Injury Microenvironment, Melissa Renee Wrobel

Wayne State University Dissertations

Clinically available treatments are insufficient to achieve full functional recovery in large (>3cm) peripheral nerve injuries (PNI). The objectives in this thesis were 1) to study often overlooked elements of intrinsic PNI repair including release of inhibitory CSPGs and post-injury responses of inflammatory macrophages and dedifferentiated Schwann cells; 2) to create biomaterial scaf-folds featuring topographical and adhesive cues to enhance neurite outgrowth; and 3) to test the ability of those cues to direct macrophages and Schwann cells towards a pro-regenerative phe-notype. It is hypothesized that recapitulating the positive and negative cues of the PNI microenvi-ronment can better improve regeneration. …

Utility Of Ultrasound/Photoacoustic Imaging For Accurate Catheter Tracking And Temperature Monitoring During Endovenous Laser Ablation, Ayushi Jharia, Keerthana Palani, Yan Yan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

Laser ablation is a treatment method that uses light energy through a catheter inserted into a vein to induce localized heat to close the diseased blood vessels. Ultrasound (US) imaging has been used for catheter visualization and tracking. US has limitations for tracking the accurate location of the fiber tip inside small perforating veins such as angular dependency and comet tail artifacts. We propose a robust and accurate method for fiber tip tracking using combined US and Photoacoustic (PA) imaging to overcome the existing limitations.

Integrative Pathway Analysis Pipeline For Mirna And Mrna Data, Diana Mabel Diaz Herrera

Wayne State University Theses

The identification of pathways that are involved in a particular phenotype helps us understand the underlying biological processes. Traditional pathway analysis techniques aim to infer the impact on individual pathways using only mRNA levels. However, recent studies showed that gene expression alone is unable to capture the whole picture of biological phenomena. At the same time, MicroRNAs (miRNAs) are newly discovered gene regulators that have shown to play an important role in diagnosis, and prognosis for different types of diseases. Current pathway analysis techniques do not take miRNAs into consideration. In this project, we investigate the effect of integrating miRNA …

Turbulent Spray Combustion Modeling Using Direct Integration Of Chemistry And Flamelet Generated Manifolds, Ashraya Goyal

Wayne State University Theses

Turbulent spray combustion of n-dodecane was modeled at engine relevant conditions using various combustion models (Direct Integration of Chemistry and Flamelet Generated Manifolds) and turbulence models (Dynamic Structure Large Eddy Simulation and RNG Reynolds-Averaged Naiver-Stokes). A recently developed n-dodecane mechanism was utilized and the turbulent spray was simulated at various combustion chamber initial gas temperature and pressure conditions. Mesh with size of 31 microns was utilized to resolve small eddies around the spray. The pressure-based ignition delay, flame lift-off length, and spray and jet penetrations were studied and compared with experimental measurements. The Direct Integration of Chemistry and Flamelet Generated …

Analysis Of Cross-Layer Optimization Of Facial Recognition In Automated Video Surveillance, Loren Garavaglia

Wayne State University Theses

Interest in automated video surveillance systems has grown dramatically and with that so too has research on the topic. Recent approaches have begun addressing the issues of scalability and cost. One method aimed to utilize cross-layer information for adjusting bandwidth allocated to each video source. Work on this topic focused on using distortion and accuracy for face detection as an adjustment metric, utilizing older, less efficient codecs. The framework was shown to increase accuracy in face detection by interpreting dynamic network conditions in order to manage application rates and transmission opportunities for video sources with the added benefit of reducing …

A New Centering Table For Encapsulated Glass Positioning, Chongyang Li

Wayne State University Theses

With the progress of the society, people`s living standard is increasing. More and more cars (more than 72 million) are produced and utilized all over the world. This makes a large number of quarter windows which located on the back-side window of a vehicle are urgently needed. Encapsulated glass is widely adopted for a quarter window for various advantages. Positioning by centering table is one of the most important procedures during the fabrication of encapsulated glass for the quarter window. The existing centering table has a lot of disadvantages such as poor flexibility and precision, which results in failure in …

Monte-Carlo-Simulation-Based, Product-Quality-Focused Analysis Of Nanocoating Curing And Post Curing Process, Jianming Zhao

Wayne State University Theses

ABSTRACT

MONTE CARLO SIMULATION BASED

PRODUCT QUALITY ANALYSIS OF

POLYMER COATING CURING AND POST CURING

By

Jianming Zhao

May 2017

Advisor：Dr. Yinlun Huang

Major: Chemical Engineering

Degree: Master of Science

To achieve better property of polymer coatings, different categories of nanoparticles are applied before coating’s curing process. However, one of the adverse effects is the change of final property, which leads the difficulty of product quality control. Using mathematical modeling method can actually improve the cost and time to get a prediction of product quality. Still now, different series of models are developed for various purposes. For example, Monte-Carlo simulation …

Dynamic Rabi Oscillations In A Quantum Dot Embedded In A Nanobridge In The Presence Of Surface Acoustic Waves, Lev Mourokh, Achim Wixforth, Florian Beil, Max Bichler, Werner Wegscheider, Robert H. Blick

Publications and Research

A quantum dot is created within a suspended nanobridge containing a two-dimensional electron gas. The electron current through this dot exhibits well-pronounced Coulomb blockade oscillations. When surface acoustic waves (SAW) are driven through the nanobridge, Coulomb blockade peaks are shifted. To explain this feature, we derive the expressions for the quantum dot level populations and electron currents through these levels and show that SAW-induced Rabi oscillations lead to the observed phenomenology.

A Comparative Analysis Of Furniture Dowel Joint Strength Among Various Dowel Styles, Taylor C. Fatheree

Undergraduate Honors Theses

This study examines the effectiveness of various dowels used in furniture joints. Using multiple linear regression, it examines the interaction between dowel penetration depth and surface treatment. Two commercially available surface treatments, fluted cut and spiral cut, were tested against a smooth home-made dowel. Through the bending tests, it was found that depth of penetration had a positive effect on the joint strength. Additionally, home-made dowels were significantly better than both fluted and spiral in softwood tests, and the home-made and the spiral were significantly better than the fluted in the hardwood tests.

Increasing Efficiency In The Construction Industry And Construction Management Classrooms Using Computer Software, Tina T. Bien

Undergraduate Honors Theses

The purpose of this research is to identify the best computer software programs that are the most effective within the construction industry. Companies are gradually shifting from manual practices to various software and technologies to optimize business and communication efficiency. With the plethora of software available, the industry does not fully understand which software are the most effective for addressing the challenges of the industry. As the industry is struggling with integrating these software into their company structure, more money is being spent to tackle the challenges that face the construction industry today. Companies that do not integrate construction technology …

Characterizing Effects Of Nitric Oxide Sterilization On Tert-Butyl Acrylate Shape Memory Polymers, Ben Phillippi

Theses - ALL

As research into the potential uses of shape memory polymers (SMPs) as implantable medical devices continues to grow and expand, so does the need for an accurate and reliable sterilization mechanism. The ability of an SMP to precisely undergo a programmed shape change will define its ability to accomplish a therapeutic task. To ensure proper execution of the in vivo shape change, the sterilization process must not negatively affect the shape memory behavior of the material. To address this need, this thesis investigates the effectiveness of a benchtop nitric oxide (NOx) sterilization process and the extent to which the process …

Nanoparticle-Induced Unusual Melting And Solidification Behaviours Of Metals, C. Ma, Lianyi Chen, C. Cao, X.C. Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Thermal Analysis Of 3d Printed 420 Stainless Steel, Adithya Pothuri

All Graduate Theses, Dissertations, and Other Capstone Projects

Additive manufacturing opens new possibilities in the manufacturing industry. 3D printing is a form of additive manufacturing. 3D printers will have a significant influence over the industrial market, with extremely positive effects in no time. The main aim of this research is to determine the effect of process parameters of Binder Jet manufactured 420 Stainless Steel (420SS) parts on thermal properties such as thermal conductivity. Different parameters, such as layer thickness, sintering time and sintering temperature were varied. A full factorial design of experiment matrix was made by varying these parameters using two levels. Testing showed that different parameters affected …

Photocatalytic Decomposition Of Phenol Under Visible And Uv Light Utilizing Titanium Dioxide Based Catalysts, Marjorie G. Steiner

Honors Theses and Capstones

Pollution in wastewater effluvia from phenol and phenolic compounds is a common occurrence in many industrial manufacturing plants. Phenol is toxic to human beings as well as a contaminant to the environment, meanwhile, it is difficult to remove from wastewater due to its non-biodegradable nature. To boost the rate of decomposition, various catalytic approaches have been developed. With the interest of decreasing operation cost, titanium dioxide (TiO₂) based catalysts have emerged as good candidates for the photocatalytic process.

In this honors project, a series of TiO₂ based catalysts, including TiO₂, N-TiO₂, Cu-TiO_{2 …}

Sensor Characterization And Signal Fusion For Instanteye, Wyman T. Smith

Honors Theses and Capstones

The practicality and effectiveness of using a TerraRanger Duo—a parallel sonar and infrared time-of-flight distance sensor—payload for obstacle detection is investigated for use with Physical Science Inc.’s InstantEye drone. A Python program was developed to interface with the serial data output before comparing the sensor’s empirical performance against its data sheet. The two signals from the distinct sensor modules, each with their characterized strengths and weaknesses, were then fused with a Kalman filter. This was further refined by imposing conditional weighting based on the known sensor characteristics. The filter output, with conditional corrections, was able to accurately track a single …

Improving Sensitivity Of Electrochemical Sensors With Convective Transport In Free-Standing, Carbon Nanotube Structures, Benjamin J. Brownlee, Kevin M. Marr, Jonathan C. Claussen, Brian D. Iverson

Faculty Publications

High-aspect-ratio, porous membrane of vertically-aligned carbon nanotubes (CNTs) were developed through a templated microfabrication approach for electrochemical sensing. Nanostructured platinum (Pt) catalyst was deposited onto the CNTs with a facile, electroless deposition method, resulting in a Pt-nanowire-coated, CNT sensor (PN-CNT). Convection mass transfer enhancement was shown to improve PN-CNT sensor performance in the non-enzymatic, amperometric sensing of hydrogen peroxide (H₂O₂). In particular, convective enhancement was achieved through the use of high surface area to fluid volume structures and concentration boundary layer confinement in a channel. Stir speed and sensor orientation especially influenced the measured current in …

Optimal Combined Long-Term Facility Design And Short-Term Operational Strategy For Chp Capacity Investments, Jose Mojica, Damon Petersen, Brigham Hansen, Kody Powell, John Hedengren

Faculty Publications

This work presents a detailed case study for the optimization of the expansion of a district energy system evaluating the investment decision timing, type of capacity expansion, and fine-scale operational modes. The study develops an optimization framework to find the investment schedule over 30 years with options of investing in traditional heating sources (boilers) or a next-generation combined heat and power (CHP) plant that provides heat and electricity. In district energy systems, the selected capacity and type of system is dependent on demand-side requirements, energy prices, and environmental costs. This work formulates capacity planning over a time horizon as a …

Control Of Columnar To Equiaxed Transition In Solidification Macrostructure Of Austenitic Stainless Steel Castings, Semen Naumovich Lekakh, Ronald J. O'Malley, Mark C. Emmendorfer, Brenton Hrebec

Materials Science and Engineering Faculty Research & Creative Works

Solidification macrostructure is of great importance for the properties and the quality of castings made from austenitic grade stainless steels (ASS) because there are limited options to change as-cast macrostructure in the solid condition. A typical cast macrostructure of ASS has a fine surface chilled zone followed by an elongated dendrite zone, columnar to equiaxed transition (CET) zone, and centrally located equiaxed crystals. Several castings from ASS were produced to determine the effects of casting geometry, chilling, and grain refinement on CET. The transient thermal field in solidified heavy castings was simulated and used to determine an isotherm velocity (V) …

Assessment Of Multimode Spacecraft Micropropulsion Systems, Steven P. Berg, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multimode spacecraft micro propulsion systems that include a high-Thrust chemical mode and high-specific impulse electric mode are assessed with specific reference to CubeSat-sized satellite applications. Both cold-gas butane propellant and ionic liquid chemical monopropellant modes are investigated alongside pulsed plasma, electrospray, and ion electric thruster modes. These systems are studied by varying electric propulsion usage percent and calculating the payload mass fraction and thruster burn time for missions requiring 250, 500, and 1000 m/s delta-V. Systems involving chemical monopropellants have the highest payload mass fractions for a reference mission of 500 m/s delta-V and 6U-sized CubeSat, where 1U is a …

Sensitivity Analysis Method To Address User Disparities In The Analytic Hierarchy Process, Marie Ivanco, Gene Hou, Jennifer Michaeli

Mechanical & Aerospace Engineering Faculty Publications

Decision makers often face complex problems, which can seldom be addressed well without the use of structured analytical models. Mathematical models have been developed to streamline and facilitate decision making activities, and among these, the Analytic Hierarchy Process (AHP) constitutes one of the most utilized multi-criteria decision analysis methods. While AHP has been thoroughly researched and applied, the method still shows limitations in terms of addressing user profile disparities. A novel sensitivity analysis method based on local partial derivatives is presented here to address these limitations. This new methodology informs AHP users of which pairwise comparisons most impact the derived …

Implementing Peer-Review Activities For Engineering Writing Assignments, Stacie I. Ringleb, Orlando M. Ayala, Jennifer Kidd

Mechanical & Aerospace Engineering Faculty Publications

Professional engineers spend a considerable portion of their day writing, yet disciplinary writing skills are not addressed in many engineering courses. This study investigates peer review as a mean to enhance student writing in engineering courses. Students completed formative peer reviews using an online peer review system for a group project in a fluid mechanics course (with online and face-to-face sections) and for an individual writing assignment in a senior capstone class in mechanical engineering. A university-wide rubric for disciplinary writing was used to assess student writing performance on interim and final assignments completed over the course of a semester. …

Smart Ev Charging For Improved Sustainable Mobility, Ashutosh Shivakumar

Browse all Theses and Dissertations

The landscape of energy generation and utilization is witnessing an unprecedented change. We are at the threshold of a major shift in electricity generation from utilization of conventional sources of energy like coal to sustainable and renewable sources of energy like solar and wind. On the other hand, electricity consumption, especially in the field of transportation, due to advancements in the field of battery research and exponential technologies like vehicle telematics, is seeing a shift from carbon based to Lithium based fuel. Encouraged by 1. Decrease in the cost of Li – ion based batteries 2. Breakthroughs in battery chemistry …

Zeolitic Imidazolate Framework (Zif) Incorporated Membrane For Co2/Ch4 Separation, Nampetch Padungpetch

Chulalongkorn University Theses and Dissertations (Chula ETD)

Biogas is the alternative energy that has a methane gas as the main composition. Before using it, biogas must be upgraded by the removal of all impurities especially CO2. The membrane technology is considered an efficient and environmentally friendly process for biogas upgrading. However, there is still a limited number of promising membranes. Accordingly, this study aims to develop the hollow fiber membrane for the biogas upgrading. The synthesized hollow fiber membranes, which were a composite membrane, were composed of a support layer of polyetherimide (PEI) and a mixed matrix selective layer of commercial poly(ether-block-amide) (Pebax 1657) and zeolitic imidazolate …

Next Generation Exa-Scale Capable Software For High Fidelity Physics Aware Simulations, Ashesh Kumar Chattopadhyay

Open Access Theses & Dissertations

Physics aware simulations, often arising in problems of fluid dynamics, aerodynamics and multi-physics areas have demanded the need for computing software that has the capability to resolve the complexities at multiple scales to analyze and visualize the effects of their interactions with the surroundings. Usually the governing dynamics of these phenomenon appear in the form of complex partial differential equations whose numerical solutions impose various constraints on computational complexity, programming time and efficient throughput. In this scenario, the need of computing software that can solve very large problems resolving the physics of these phenomenon at multiple scales is imperative. Despite …

Decision Process In Mcdm With Large Number Of Criteria And Heterogeneous Risk Preferences, Jian Liu, Hong Kuan Zhao, Zhao Bin Li, Si Feng Liu

Electrical and Computer Engineering Faculty Research & Creative Works

A new decision process is proposed to address the challenge that a large number of criteria in the multi-criteria decision making (MCDM) problem and the decision makers with heterogeneous risk preferences. First, from the perspective of objective data, the effective criteria are extracted based on the similarity relations between criterion values and the criteria are weighted, respectively. Second, the corresponding types of theoretic model of risk preferences expectations will be built, based on the possibility and similarity between criterion values to solve the problem for different interval numbers with the same expectation. Then, the risk preferences (Risk-seeking, risk-neutral and risk-aversion) …

Nebraska Summary: S1149 Challenger 1046, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148 Challenger 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1147 Challenger 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1141 John Deere 6120r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1110 John Deere 6130m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …