Engineering Commons^™

Reengineering A 2-Tier Database Application With Software Architecture, Hong G. Jung

ASA Multidisciplinary Research Symposium

The purpose of this research is to demonstrate how to reengineer a legacy Database Application using to a target system with MVC and 3-layered architecture. A Coffee Inventory Management database application is used for legacy application. The benefits of the reengineering are discussed.

A Case Study Of Applying Node.Js In Basic Drone Programming And Web Development, Jeremy Kim, Alireza Khamesipour, Charith Atapattu, Mahdi Moradi, Abdallah Jameel Al-Khayri

ASA Multidisciplinary Research Symposium

In this research, we first seek to determine if basic drone programming can give insight to learning Node.js and be applied to web development through using Node.js and the Drone. Second, we seek how drone programming can help student recruitment by using a showcase.

2017 Robinson Engine Design, Christian Klem, Alli Giblin, James Gross

ASA Multidisciplinary Research Symposium

The Robinson-Malibu patent is an engine design theory that will reduce emissions, increase MPGs and performance.

Morphological, Thermal And Oxygen Barrier Properties Plasticized Film Polylactic Acid, Kurniawan Yuniarto, Bruce A. Welt, Foliatini -, Hanafi -, Candra Irawan

Journal of Applied Packaging Research

Introducing plasticizer poly(ethylene glycol) (PEG400) was applied into poly(lactic acid) (PLA) to produce film matrix packaging by direct casting. Non mechanical properties were carried out plasticized PLA including morphology, crystallinity structure and degree, thermal properties and oxygen barrier properties. Plasticized PLA revealed improving surface structure of PLA film matrix form fractures and homogenous film were achieved at 5% PEG 400. Chromatogram PLA and plasticized PLA were categorized crystal structure an α-form crystal. Intercalated and exfoliated structure did not occur significantly due to dispersion PEG 400 in the matrix but indicated dispersion structure. Thermal properties did not improve plasticized PLA significantly …

Optimal Design And Control Of An Electromechanical Transfemoral Prosthesis With Energy Regeneration, Farbod Rohani, Hanz Richter, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

In this paper, we present the design of an electromechanical above-knee active prosthesis with energy storage and regeneration. The system consists of geared knee and ankle motors, parallel springs for each motor, an ultracapacitor, and controllable four-quadrant power converters. The goal is to maximize the performance of the system by finding optimal controls and design parameters. A model of the system dynamics was developed, and used to solve a combined trajectory and design optimization problem. The objectives of the optimization were to minimize tracking error relative to human joint motions, as well as energy use. The optimization problem was solved …

Design And Simulation Of A Miniature Cylindrical Mirror Auger Electron Energy Analyzer With Secondary Electron Noise Suppression, Jay A. Bieber

USF Tampa Graduate Theses and Dissertations

In the nanoscale metrology industry, there is a need for low-cost instruments, which have the ability to probe the structrure and elemental composition of thin films. This dissertation, describes the research performed to design and simulate a miniature Cylindrical Mirror Analyzer, (CMA), and Auger Electron Spectrometer, (AES). The CMA includes an integrated coaxial thermionic electron source. Electron optics simulations were performed using the Finite Element Method, (FEM), software COMSOL. To address the large Secondary Electron, (SE), noise, inherent in AES spectra, this research also included experiments to create structures in materials, which were intended to suppress SE backgound noise in …

Comparison Of Lithium-Ion Anode Materials Using An Experimentally Verified Physics-Based Electrochemical Model, Rujian Fu, Xuan Joe Zhou, Hengbin Fan, Douglas Blaisdell, Ajay Jagadale, Xi Zhang, Rui Xiong

Electrical & Computer Engineering Publications

Researchers are in search of parameters inside Li-ion batteries that can be utilized to control their external behavior. Physics-based electrochemical model could bridge the gap between Li+ transportation and distribution inside battery and battery performance outside. In this paper, two commercially available Li-ion anode materials: graphite and Lithium titanate (Li4Ti5O12 or LTO) were selected and a physics-based electrochemical model was developed based on half-cell assembly and testing. It is found that LTO has a smaller diffusion coefficient (Ds) than graphite, which causes a larger overpotential, leading to a smaller capacity utilization and, correspondingly, a shorter duration of constant current charge …

Targeting The Bacterial Orisome In The Search For New Antibiotics, Julia E. Grimwade, Alan C. Leonard

Biomedical Engineering and Sciences Faculty Publications

There is an urgent need for new antibiotics to combat drug resistant bacteria. Existing antibiotics act on only a small number of proteins and pathways in bacterial cells, and it seems logical that expansion of the target set could lead to development of novel antimicrobial agents. One essential process, not yet exploited for antibiotic discovery, is the initiation stage of chromosome replication, mediated by the bacterial orisome. In all bacteria, orisomes assemble when the initiator protein, DnaA, as well as accessory proteins, bind to a DNA scaffold called the origin of replication (oriC). Orisomes perform the essential tasks of unwinding …

Wearete: A Scalable Wearable E-Textile Triboelectric Energy Harvesting System For Human Motion Scavenging, Xian Li, Ye Sun

Michigan Tech Publications, Part 1

In this paper, we report the design, experimental validation and application of a scalable, wearable e-textile triboelectric energy harvesting (WearETE) system for scavenging energy from activities of daily living. The WearETE system features ultra-low-cost material and manufacturing methods, high accessibility, and high feasibility for powering wearable sensors and electronics. The foam and e-textile are used as the two active tribomaterials for energy harvester design with the consideration of flexibility and wearability. A calibration platform is also developed to quantify the input mechanical power and power efficiency. The performance of the WearETE system for human motion scavenging is validated and calibrated …

Effective Mechanical Properties Of Multilayer Nano-Heterostructures, T Mukhopadhyay, A Mahata, S Adhikari, Mohsen Asle Zaeem

Materials Science and Engineering Faculty Research & Creative Works

Two-dimensional and quasi-two-dimensional materials are important nanostructures because of their exciting electronic, optical, thermal, chemical and mechanical properties. However, a single-layer nanomaterial may not possess a particular property adequately, or multiple desired properties simultaneously. Recently a new trend has emerged to develop nano-heterostructures by assembling multiple monolayers of different nanostructures to achieve various tunable desired properties simultaneously. For example, transition metal dichalcogenides such as MoS₂ show promising electronic and piezoelectric properties, but their low mechanical strength is a constraint for practical applications. This barrier can be mitigated by considering graphene-MoS₂ heterostructure, as graphene possesses strong mechanical properties. We …

Design Of Post-Consumer Modification Of Standard Solar Modules To Form Large-Area Building-Integrated Photovoltaic Roof Slates, Joshua M. Pearce, Jay Meldrum, Nolan Osborne

Department of Materials Science and Engineering Publications

Building-integrated photovoltaic (BIPV) systems have improved aesthetics but generally cost far more than conventional PV systems because of small manufacturing scale. Thus, in the short and medium term, there is a need for a BIPV mounting system that utilizes conventional modules. Such a design is provided here with a novel modification of conventional photovoltaic (PV) modules to allow them to act as BIPV roofing slates. The open-source designs for the mechanical components necessary to provide the post-consumer conversion for a conventional PV module are provided, and prototypes are fabricated and installed on a mock roof system along with control modules …

Understanding The Linkages Between Urban Transportation Design And Population Exposure To Traffic-Related Air Pollution: Application Of An Integrated Transportation And Air Pollution Modeling Framework To Tampa, Fl, Sashikanth Gurram

USF Tampa Graduate Theses and Dissertations

Rapid and unplanned urbanization has ushered in a variety of public health challenges, including exposure to traffic pollution and greater dependence on automobiles. Moreover, vulnerable population groups often bear the brunt of negative outcomes and are subject to disproportionate exposure and health effects. This makes it imperative for urban transportation engineers, land use planners, and public health professionals to work synergistically to understand both the relationship between urban design and population exposure to traffic pollution, and its social distribution. Researchers have started to pay close attention to this connection, mainly by conducting observational studies on the relationship between transportation, urban …

18f-Fdg Pet/Ctct-Based Radiomics For The Prediction Of Radiochemotherapy Treatment Outcomes Of Cervical Cancer, Badereldeen Abdulmajeed Altazi

USF Tampa Graduate Theses and Dissertations

Cervical cancer remains the third most commonly diagnosed gynecological malignancy in the United States and throughout the world despite being potentially preventable. Patients diagnosed with cervical cancer may develop local recurrence in the cervix and surrounding structures (vaginal apex, parametrial, or paracervical), regional recurrence in pelvic lymph nodes, distant metastasis, or a combination of all. The management of such treatment outcomes has not been subject to rigorous investigation. Therefore, there is a need for studies and clinical trials that focus on decision making to support the choice of the best treatment modality that leads to the minimal number of adverse …

Dns And Les Of Scalar Transfer Across An Air-Water Interface During Inception And Growth Of Langmuir Circulation, Amine Hafsi

USF Tampa Graduate Theses and Dissertations

Direct numerical simulations (DNS) of an initially quiescent coupled air-water interface driven by an air flow with free stream speed of 5 m/s have been conducted. The DNS solves a scalar advection-diffusion equation for dissolved gas (or scalar) concentration in order to determine the impact of the water-side turbulence on scalar (mass) transfer from the air side to the water side and subsequent vertical transport in the water column. Two simulations are compared: one with a freely deforming interface and a second one with a flat interface. In the first simulation, the deforming interface evolves in the form of gravity-capillary …

Nonlinear Optical Properties Of Gesbs Chalcogenide Waveguides, Ju Won Choi, Byoung Uk Sohn, George F.R. Chen, Dawn T.H. Tan, Zhaohong Han, Lionel C. Kimerling, Charmayne Smith (Lonergan), Kathleen A. Richardson, Anuradha M. Agarwal

Materials Science and Engineering Faculty Research & Creative Works

We characterize the nonlinear optical properties of GeSbS chalcogenide glasses with fiber-based experiments. A waveguide nonlinear parameter of 7 W-1/m and nonlinear refractive index of 3.71 x 10-18 m2/W are estimated by self-phase modulation. A GeSbS waveguide could also generate a supercontinuum from 1280 to 2120 nm at the -30 dB level for maximum coupled power of 340 W, showing a 14-fold spectral broadening of the input spectrum explained by cascaded stimulated Raman scattering.

The Santa Clara, 2017-11-16, Santa Clara University

The Santa Clara

No abstract provided.

How Aircraft Stability Affects Handling Characteristics And Piloting Techniques, Nihad E. Daidzic

Aviation Department Publications

FAA Safety Seminar (GL1578763) held at Minnesota State University, Mankato, Wiecking Center Auditorium at 18:00 CST on Thursday, November 16, 2017.

Non-Orthogonal Multiple Access In A Mmwave Based Iot Wireless System With Swipt, Haijian Sun, Qun Wang, Shakil Ahmed, Rose Qingyang Hu

Electrical and Computer Engineering Student Research

This paper applies non-orthogonal multiple access (NOMA) and relaying schemes in a mmWave based wireless heterogeneous system that aims to support Internet of Things (IoT) applications. The system consists of high power base stations, low-power relays, and low-power IoT devices. Due to the ad hoc deployment nature of low-power relays, they have very limited access to wireline power charging facilities. Furthermore, IoT devices normally have limited power and short battery life. The study assumes low-power relays and IoT devices are capable of energy harvest functionality. With the help of relays or IoT devices, downlink NOMA transmission consists of two phases. …

Suitability Of River Delta Sediment As Proppant, Missouri And Niobrara Rivers, Nebraska And South Dakota, 2015, Ronald B. Zelt, Christopher M. Hobza, Bethany L. Burton, Nathaniel J. Schaepe, Nadine M. Piatak-Hackley

United States Geological Survey: Water Reports and Publications

Document abstract

Sediment management is a challenge faced by reservoir managers who have several potential options, including dredging, for mitigation of storage capacity lost to sedimentation. As sediment is removed from reservoir storage, potential use of the sediment for socioeconomic or ecological benefit could potentially defray some costs of its removal. Rivers that transport a sandy sediment load will deposit the sand load along a reservoir-headwaters reach where the current of the river slackens progressively as its bed approaches and then descends below the reservoir water level. Given a rare combination of factors, a reservoir deposit of alluvial sand has …

Compact And Wideband Mmic Phase Shifters Using Tunable Active Inductor Loaded All-Pass Networks, David M. Zaiden

USF Tampa Graduate Theses and Dissertations

This dissertation addresses the design of monolithically integrated phase shifters at S- and L- frequency bands using a commercially available GaAs process from Triquint. The focus of the design is to operate over a wide bandwidth with full 360° phase shift capability, 50 Ω input/output impedance match and low RMS phase and gain errors. The first version of the design is based on passive all-pass phase shifters integrated with wideband amplifiers to compensate for insertion loss. This design uses a 4-bit system to achieve the required phase shift and each bit consists of 3 sections of all-pass filters designed at …

New Multi-Resolution Shortest-Path Navigation Techniques Using The Ndvi Imagery, Rui Tian

LSU Master's Theses

In this thesis work, we study the visible-light and near-infrared images for practical applications. Different colormaps, contours, or pixel-based indicators can be extracted from these optical images. Among them, normalized difference vegetation index (NDVI) has been widely utilized for applications in vegetation-health monitoring, geological survey, and climate forecast, etc. recently. We extend the use of NDVI for the navigation over the uncharted geographical areas. Henceforth, we propose a new algorithm which is called multi-resolution Dijkstra algorithm to find the approximate shortest paths within the large planar graphs representing the real terrains.

The outline of this thesis is briefed as follows. …

High-Throughput Droplet Barcoding And Automated Image Analysis In Microfluidic Droplet Trapping Array, Manibarathi Vaithiyanathan

LSU Master's Theses

Molecularly-targeted therapeutics and personalized medicine have dramatically increased the median survival rate of patients suffering from cancer. However, cellular heterogeneity and the personalized nature of cancer have resulted in the limited success of single drug treatments which has led to the use of multiple therapeutic combinations. This has required the development of new analytical methods capable of multiplexed high-throughput screening (HTS) technologies necessary to identify is single or multi-agent therapies are effective in ex vivo samples like liquid biopsies. Droplet microfluidic devices have garnered significant interest to facilitate high-throughput, single cell analysis of heterogeneous populations. However, these devices are still …

Document Clustering, David Anastasiu, Andrea Tagarelli

Faculty Publications

In a world flooded with information, document clustering is an important tool that can help categorize and extract insight from text collections. It works by grouping similar documents, while simultaneously discriminating between groups. In this article, we provide a brief overview of the principal techniques used to cluster documents, and introduce a series of novel deep-learning based methods recently designed for the document clustering task. In our overview, we point the reader to salient works that can provide a deeper understanding of the topics discussed.

Her Path To Success: Usu’S Rose Hu Is A Leader In Tech | College Of Engineering, Usu College Of Engineering

College of Engineering News

Growing up in China’s Jiangsu province, Rose Hu was a shy girl who studied hard and looked up to her four older siblings.

Physical Layer Algorithms For Reliability And Spectral Efficiency In Wireless Communications, Zekeriyya Esat Ankarali

USF Tampa Graduate Theses and Dissertations

Support of many different services, approximately 1000x increase of current data rates, ultra-reliability, low latency and energy/cost efficiency are among the demands from upcoming 5G standard. In order to meet them, researchers investigate various potential technologies involving different network layers and discuss their trade-offs for possible 5G scenarios. Waveform design is a critical part of these efforts and various alternatives have been heavily discussed over the last few years. Besides that, wireless technology is expected to be deployed in many critical applications including the ones involving with daily life activities, health-care and vehicular traffic. Therefore, security of wireless systems is …

The Inverse Kinetics Method And Its Application To The Annular Core Research Reactor, Thomas A. Ball

Nuclear Engineering ETDs

The inverse kinetics method, is a method to calculate a reactor’s reactivity profile from its power profile. In this thesis, the reactivity profile corresponding to pulse operations of the Annular Core Research Reactor (ACRR) was sought. Of specific interest was the shutdown reactivity of the reactor following the pulse. This required accounting for delayed beryllium photoneutrons that are present in the ACRR in addition to U-235 delayed neutron precursors. The power profiles of the pulses were experimentally measured using a diamond photoconductive detector (PCD). Using the inverse kinetics equation, a computer code was written to numerically calculate the reactivity corresponding …

Nonlinear Model-Based Control For Neuromuscular Electrical Stimulation, Ruzhou Yang

LSU Doctoral Dissertations

Neuromuscular electrical stimulation (NMES) is a technology where skeletal muscles are externally stimulated by electrodes to help restore functionality to human limbs with motor neuron disorder. This dissertation is concerned with the model-based feedback control of the NMES quadriceps muscle group-knee joint dynamics. A class of nonlinear controllers is presented based on various levels of model structures and uncertainties. The two main control techniques used throughout this work are backstepping control and Lyapunov stability theory.

In the first control strategy, we design a model-based nonlinear control law for the system with the exactly known passive mechanical that ensures asymptotical tracking. …

Applying Modern Technology In The Preservation Of Historic Concrete Picnic Tables, Michele M. Anderson

Civil Engineering ETDs

Preserving historical concrete structures recognizes the work and skills of past generations and allows the communities surrounding these pieces of history the opportunity to enjoy the character and purpose of their construction. Restoration of concrete picnic tables, constructed in the 1930s by the Civilian Conservation Corps, required researching materials and methods of construction during the original construction period. Eight decades of environmental and weather cycles did not decay the historic structures. Acts of vandalism destroyed the purpose of the tables and benches. Restoration of the historic picnic tables required extensive literature review for the materials and methods used during the …

Hydrogeochemical Investigation Of Recharge Pathways To Intermediate And Regional Groundwater In Cañon De Valle And Technical Area 16, Los Alamos National Laboratory, Brendan W. Brady

Civil Engineering ETDs

In aquifers consisting of fractured or porous igneous rocks, as well as conglomerate and sandstone products of volcanic formations, silicate minerals actively dissolve and precipitate (Eby, 2004; Eriksson, 1985; Drever, 1982). Dissolution of hydrated volcanic glass is also known to influence the character of groundwater to which it is exposed (White et al., 1980). Hydrochemical evolution, within saturated zones of volcanic formations, is modeled here as a means to resolve the sources feeding a perched groundwater zone. By observation of solute mass balances in groundwater, together with rock chemistry, this study characterizes the chemical weathering processes active along recharge pathways …

Investigating Scalable Manufacturing Of High-Conductivity Wires And Coatings From Ultra-Long Carbon Nanotubes, Pouria Khanbolouki

Mechanical Engineering ETDs

Carbon nanotubes (CNTs) are a promising candidate for next generation of electrical wirings and electromagnetic interference (EMI) shielding materials due to their exceptional mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can potentially replace current conductors in many industries including aerospace, automotive, gas and oil.

This thesis investigates a new manufacturing approach, based on conventional solution coating and wire drawing methods, to fabricate high conductivity wires and coatings from ultra-long carbon nanotubes. …