Engineering Commons^™

Research Of Sustainable Jet Fuel Production Using Microbes, Rajee Olaganathan

Publications

Global climate change, coupled with rapidly increasing oil prices and energy demand around the world, has paved a way for intense research in the biofuel sector. Stakeholders in the aviation industry have started to focus on bio-jet fuel. Bio-jet fuel is regarded as a sustainable solution to greenhouse gas emissions and energy demand. This paper provides a brief review of the biofuel production technologies, the role of bacteria in producing hydrocarbons and the recent advancements in microbial engineering to enhance the biofuel production. Finally, this paper concludes by highlighting the challenges and future research implications in bio-jet fuel production.

Commercial Airline Pilots' Attitudinal Data On Controlled Rest In Position: A Qualitative Inquiry, Stephen Rice, Scott R. Winter, Emily C. Anania, Gajapriya Tamilselvan, Shawn Doherty

Publications

Fatigue is a significant contributor to accidents in aviation, in commercial, private, and military aircraft, and is defined as “extreme tiredness resulting from mental or physical exertion or illness” (Oxford Dictionary, 2017, n.p.). Typical fatigue mitigation techniques include work and rest scheduling, obtaining required minimum rest before a flight, and pharmacological countermeasures (Caldwell & Caldwell, 2005; Caldwell, Mallis, Caldwell, Paul, Miller, & Neri, 2009). However, Controlled Rest in Position (CRIP), or in-flight sleep, may be another potential way to mitigate pilot fatigue. Prior research has investigated consumer perceptions relating to CRIP, revealing unfavorable perceptions (Winter, Carryl, & Rice, 2015). However, …

Uas Pilots Code – Annotated Version 1.0, Michael S. Baum, Kristine Kiernan, Donald W. Steinman, Ryan J. Wallace Ed.D.

Publications

The UAS PILOTS CODE (UASPC) offers recommendations to advance flight safety, ground safety, airmanship, and professionalism.6 It presents a vision of excellence for UAS pilots and operators, and includes general guidance for all types of UAS. The UASPC offers broad guidance—a set of values—to help a pilot interpret and apply standards and regulations, and to confront real world challenges to avoid incidents and accidents. It is designed to help UAS pilots develop standard operating procedures (SOPs), effective risk management,7 safety management systems (SMS), and to encourage UAS pilots to consider themselves aviators and participants in the broader aviation community.

Efficient Interconnectivity Among Networks Under Security Constraint, Pankaz Das, Rezoan A. Shuvro, Mahshid Rahnamay-Naeini, Nasir Ghani, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

Interconnectivity among networks is essential for enhancing communication capabilities of networks such as the expansion of geographical range, higher data rate, etc. However, interconnections may initiate vulnerability (e.g., cyber attacks) to a secure network due to introducing gateways and opportunities for security attacks such as malware, which may propagate from the less secure network. In this paper, the interconnectivity among subnetworks is maximized under the constraint of security risk. The dynamics of propagation of security risk is modeled by the evil-rain influence model and the SIR (Susceptible-Infected-Recovered) epidemic model. Through extensive numerical simulations using different network topologies and interconnection patterns, …

Efficiency Improvement Of Fault-Tolerant Three-Level Power Converters, Ramin Katebi, Jiangbiao He, Waqar A. Khan, Nathan Weise

Electrical and Computer Engineering Faculty Research and Publications

Fault-tolerant power converters play a critical role in the transportation electrification. However, fault-tolerant operation, high efficiency, and low cost usually result in design criteria that have conflicting constraints and goals. The majority of the fault-tolerant power converter topologies presented in the literature confirm these conflicts. In this paper, three types of fault-tolerant neutral-point clamped (NPC) converters are investigated. Various modulation strategies are explored to reduce the losses of the redundant phase leg. The simulation and experimental results show that the Switching Frequency Optimal Phase opposition Disposition modulation strategy is the most effective approach in minimizing the losses in the redundant …

Adaptive Differential Thrust Methodology For Lateral/Directional Stability Of An Aircraft With A Completely Damaged Vertical Stabilizer, Long K. Lu, Kamran Turkoglu

Faculty Publications

This paper investigates the utilization of differential thrust to help a commercial aircraft with a damaged vertical stabilizer in order to regain its lateral/directional stability. In the event of an aircraft losing its vertical stabilizer, the consequential loss of the lateral/directional stability and control is likely to cause a fatal crash. In this paper, an aircraft with a completely damaged vertical stabilizer is investigated, and a unique differential thrust-based adaptive control approach is proposed to achieve a stable flight envelope. The propulsion dynamics of the aircraft is modeled as a system of differential equations with engine time constant and time …

The Effect Of Overloading On Reliability Of Wheel Loader Structural Components, Eric Raymond Achelpohl

Doctoral Dissertations

"This research attempts to provide a fundamental understanding into the relationship between the productivity of material handling equipment, specifically wheel loaders, and their ability to operate reliably when subjected to high overload conditions. The overall aim is to determine the effect of overloading the bucket on wheel loader reliability. The specific objectives of the research are to: 1) evaluate the effect of overloading the bucket on wheel loader productivity; 2) examine the effect of overloading the bucket on hydraulic pressures in the hoist cylinders (used as a proxy for forces on a wheel loader); and 3) investigate the effect of …

Torsional Behavior Of Rc Beams Strengthened With Pbo-Frcm Composite, Meyyada Y. Alabdulhady

Doctoral Dissertations

"Externally bonded fiber reinforced cementitious matrix (FRCM) composites have been investigated recently as an alternative to fiber reinforced polymer (FRP) composites to overcome certain shortcomings such as the inability to install on wet surfaces or in low temperatures, low fire resistance, low glass transition temperature, low reversibility, and lack of vapor permeability. This study includes an inclusive investigation of the torsional behavior of RC beams strengthened with externally bonded polyparaphenylene benzo-bisoxazole (PBO)-FRCM composite material. A comprehensive review and discussion of the previous experimental, analytical, and numerically-simulated torsional behavior of RC beams strengthened with FRP composite was introduced to gain a …

Adaptive Dynamic Programming With Eligibility Traces And Complexity Reduction Of High-Dimensional Systems, Seaar Jawad Kadhim Al-Dabooni

Doctoral Dissertations

"This dissertation investigates the application of a variety of computational intelligence techniques, particularly clustering and adaptive dynamic programming (ADP) designs especially heuristic dynamic programming (HDP) and dual heuristic programming (DHP). Moreover, a one-step temporal-difference (TD(0)) and n-step TD (TD(λ)) with their gradients are utilized as learning algorithms to train and online-adapt the families of ADP. The dissertation is organized into seven papers. The first paper demonstrates the robustness of model order reduction (MOR) for simulating complex dynamical systems. Agglomerative hierarchical clustering based on performance evaluation is introduced for MOR. This method computes the reduced order denominator of the transfer …

Behavior And Temporal-Based Effects Of Sustainable Self-Consolidating Concrete In Bridge Structures, Hayder Hussein Alghazali

Doctoral Dissertations

"The main objective of this study was to investigate the performance of sustainable self-consolidating concrete (SCC) for highway bridge structures. Two types of concrete were utilized in this study: high volume fly ash-self consolidating concrete (HVFA-SCC) and high strength-self consolidating concrete (HS-SCC). This dissertation consists of two major parts: a laboratory study developing and investigating the overall performance of HVFA-SCC and a field study of time-dependent field-based behavior of HS-SCC in Bridge A7957 MO, USA. In the first part, an experimental program was conducted to develop a new class of SCC incorporating up to 70% cement replacement with fly ash. …

Investigation Of The Hydrodynamics And Scale-Up Of Advanced Triso Nuclear Fuel Manufacturing Using Sophisticated Measurement Techniques, Thaar M. Aljuwaya

Doctoral Dissertations

"The successful performance and safety of the Very-High-Temperature Nuclear Reactors (VHTR) extremely depend on the quality of the TRISO nuclear fuel coated particles. However, the coating of the TRISO particles is delicate process and impacted by the hydrodynamics of spouted beds. Therefore, in this work, we applied advanced non-invasive measurement techniques which are gamma-ray computed tomography (CT) and radioactive particle tracking (RPT), to investigate foremost the local parameters to advance the fundamental understanding of the hydrodynamics and scale-up of gas-solid spouted beds. The CT technique has been applied to study the effects of particle density, particle size, bed size, and …

Data Analytics For Stochastic Control And Prognostics In Cyber-Physical Systems, Shanshan Bi

Doctoral Dissertations

"In this dissertation, several novel cyber fault diagnosis and prognosis and defense methodologies for cyber-physical systems have been proposed. First, a novel routing scheme for wireless mesh network is proposed. An effective capacity estimation for P2P and E2E path is designed to guarantee the vital transmission safety. This scheme can ensure a high quality of service (QoS) under imperfect network condition, even cyber attacks. Then, the imperfection, uncertainties, and dynamics in the cyberspace are considered both in system model and controller design. A PDF identifier is proposed to capture the time-varying delays and its distribution. With the modification of traditional …

Fabrication And Characterization Of Advanced Materials Using Laser Metal Deposition From Elemental Powder Mixture, Xueyang Chen

Doctoral Dissertations

"Over the past decades of years, a great deal of money has been spent to machine large and complex parts from high-performance metals (i.e., titanium components for aerospace applications), so users attempt to circumvent the high cost of materials. Laser metal deposition (LMD) is an additive manufacturing technique capable of fabricating complicated structures with superior properties. This dissertation aims to improve the applications of LMD technique for manufacturing metallic components by using various elemental powder mixture according to the following three categories of research topics. The first research topic is to investigate and develop a cost-effective possibility by using elemental …

Chemistry, Design, And Processing Of Two-Stage Trip Steel, Daniel M. Field

Doctoral Dissertations

"A regular solution model was developed to calculate the chemical driving force for α-martensite formation, ΔG^{λ→ α}_Chem. A model for the strain energy, ΔG^λ→α_str, was formulated utilizing the Young’s modulus (E), lattice misfit squared (δ²), and molar volume (Ω) which opposed the chemical driving force for α-martensite formation. The M^α_S was determined at a temperature at which ΔG^λ→α_Chem + ΔG^λ→α_str = 0. In conjunction with a previously developed ε-martensite model, a means of predicting the volume fraction of λ-austenite was determined; and it was shown that for values …

Data Fusion Techniques For Biomedical Informatics And Clinical Decision Support, Peng Guo

Doctoral Dissertations

"Data fusion can be used to combine multiple data sources or modalities to facilitate enhanced visualization, analysis, detection, estimation, or classification. Data fusion can be applied at the raw-data, feature-based, and decision-based levels. Data fusion applications of different sorts have been built up in areas such as statistics, computer vision and other machine learning aspects. It has been employed in a variety of realistic scenarios such as medical diagnosis, clinical decision support, and structural health monitoring. This dissertation includes investigation and development of methods to perform data fusion for cervical cancer intraepithelial neoplasia (CIN) and a clinical decision support system. …

On-Die Transient Event Sensors And System-Level Esd Testing, Abhishek Patnaik

Doctoral Dissertations

"System level electrostatic discharge (ESD) testing of electronic products is a critical part of product certification. Test methods were investigated to develop system level ESD simulation models to predict soft-failures in a system with multiple sensors. These methods rely completely on measurements. The model developed was valid only for the linear operation range of devices within the system. These methods were applied to a commercial product and used to rapidly determine when a soft failure would occur. Attaching cables and probes to determine stress voltages and currents within a system, as in the previous study, is time-consuming and can alter …

Characterization Of Triboelectric Charging In Data Centers/Display Panel Manufactures, And Emi Visualization Based On Energy Parcels Method In High Speed Interconnections, Atieh Talebzadehghahroudi

Doctoral Dissertations

"This dissertation is composed of five papers. In the first three papers, triboelectric charging, which is the underlying cause of most electrostatic discharge (ESD), during daily human activities in data centers such as well-defined pattern walking, random walking, standing up from a chair, and taking off a sweater is investigated. Further, the effect of environmental condition (temperature and relative humidity), the footwear, and flooring material in building the static voltage and the discharge process are studied.

In the fourth paper, triboelectric charge generation on the glass is investigated during the glass transportation by roller conveyor systems in display manufacturing. The …

Hydrodynamics Study Of The Bubble Columns With Intense Vertical Heat-Exchanging Tubes Using Gamma-Ray Computed Tomography And Radioactive Particle Tracking Techniques, Abbas Jawad Sultan

Doctoral Dissertations

"Understanding the hydrodynamics of bubble columns with and without vertical heat-exchanging tubes is a necessity for the proper design, scale-up, and operation of these reactors. To achieve this goal, systematic experiments were performed to visualize and quantify the influence of the presence of vertical internal tubes on the gas holdup distributions and their profiles, axial liquid velocity, and turbulent parameters (i.e., normal and shear stresses; turbulent kinetic energy) by using advanced gamma-ray computed tomography (CT) and radioactive particle tracking (RPT). In this study, the experiments were conducted in 6- and 18-inch bubble columns with an air-water system as the working …

Learning-Based Short-Time Prediction Of Photovoltaic Resources For Pre-Emptive Excursion Cancellation, Huaiqi Xie

Doctoral Dissertations

"There is a growing interest in using renewable energy resources (RES) such as wind, solar, geothermal and biomass in power systems. The main incentives for using renewable energy resources include the growing interest in sustainable and clean generation as well as reduced fuel cost. However, the challenge with using wind and solar resources is their indeterminacy which leads to voltage and frequency excursions. In this dissertation, first, the economic dispatch (ED) problem for a community microgrid is studied which explores a community energy market. As a result of this work, the importance of modeling and predicting renewable resources is understood. …

Experimental And Numerical Investigation On Tar Production And Recycling In Fixed Bed Biomass Gasifiers, Jia Yu

Doctoral Dissertations

"Bioenergy has been utilized for domestic purposes since pre-recorded history and it catches the highlight in the recent decades because it naturally benefits the world climate and energy security. Gasification is one of the key technologies to efficiently and economically convert biomass into syngas and further into biofuels. Despite these outstanding advantages, biomass gasification suffers from the formation of unfavorable byproduct tar and the consequential tar elimination. Moreover, the collected tar is toxic and thus requires storage and strict deposit method to avoid environmental pollution.

To understand the mechanisms of biomass gasification and tar production, simulations with Aspen Plus were …

Monitoring Of Hybrid Manufacturing Using Acoustic Emission Sensor, Haythem Gaja

Doctoral Dissertations

"The approach of hybrid manufacturing addressed in this research uses two manufacturing processes, one process builds a metal part using laser metal deposition, and the other process finishes the part using a milling machining. The ability to produce complete functioning parts in a short time with minimal cost and energy consumption has made hybrid manufacturing popular in many industries for parts repair and rapid prototyping. Monitoring of hybrid manufacturing processes has become popular because it increases the quality and accuracy of the parts produced and reduces both costs and production time. The goal of this work is to monitor the …

Integrated Study On The Applicability Of Co₂-Eor In Unconventional Liquids Rich Reservoirs, Dheiaa Khafief Khashan Alfarge

Doctoral Dissertations

"Unconventional Liquids Rich Reservoirs (ULR) such as Bakken, Niobrara, and Eagle Ford have become the main target for oil and gas investors as conventional formations started to deplete and diminish in number. These unconventional plays have a huge oil reserve; however, the predicted primary oil recovery is still low as an average of 7.5 %. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry because there is no commercial project for any IOR technique so far. Injecting carbon dioxide (CO₂) might be the most potential strategy to improve oil recovery in such complex plays. …

The Separation Of Shear-Driven Liquid Films From A Sharp Corner, Zahra Sadeghizadeh

Doctoral Dissertations

"The separation of shear-driven liquid films occurs in many engineering applications such as port fuel injected engines, demisters, and gas transfer lines. Despite the importance of this problem, the details of the interaction between operating parameters such as liquid flow rate, gas velocities and liquid film properties on the forces at the expanding corner are still not clear. To enhance the insight on the complicated interaction between the gas and liquid phases, the shear-driven liquid flow around a corner has been studied both experimentally and analytically in this work. The effect of the complex liquid film structure on liquid mass …

A Methodology To Predict Community College Stem Student Retention And Completion, Jennifer Lynn Snyder

Doctoral Dissertations

"Numerous government reports point to the multifaceted issues facing the country's capacity to increase the number of STEM majors, while also diversifying the workforce. Community colleges are uniquely positioned as integral partners in the higher education ecosystem. These institutions serve as an access point to opportunity for many students, especially underrepresented minorities and women. Community colleges should serve as a major pathway to students pursuing STEM degrees; however student retention and completion rates are dismally low. Therefore, there is a need to predict STEM student success and provide interventions when factors indicate potential failure. This enables educational institutions to better …

Bio-Inspired Geomaterial Improvement And Development Of Innovative Characterization Methods, Junnan Cao

Doctoral Dissertations

"This study experimentally investigated the bio-inspired improvement on geomaterials, including enzyme induced calcite precipitation (EICP) and biopolymers. This study also developed several innovative characterization tools to advance the state-of-the-art testing techniques, including SIP-BE column, rotational sedimental panel, and backpressure saturated constant hydraulic gradient break through column. Firstly, EICP test was performed on Ottawa 50-70 sand in a newly developed SIP-BE column. Nondestructive techniques -- spectral induced polarization (SIP) and bender element were used to monitor the precipitation process and shear wave velocities (V_s). SIP, V_s, and SEM results all suggest contact cementation as the preferential precipitation …

Design And Development Of A Compact X-Ray Tube For Stationary Ct Architecture, Ashish Vighnahar Avachat

Doctoral Dissertations

"Multisource architectures enable sweeping one or more x-ray beams across the imaging field-of-view faster than physically moving a single x-ray source and/or a detector. Hence, these architectures are attractive for the applications in which temporal resolution plays an important role, for example, cardiac computed tomography (CT) or real-time CT. One of the recent developments in multisource architectures for CT imaging is stationary CT architecture, whereby two separate stationary arrays -- one for x-ray sources and one for detectors -- are utilized to sweep one or more x-ray beams along the gantry and acquire 360 degree projections. To have a stationary …

Electrodeposited Epitaxial Cobalt Oxides And Copper Metal, Caleb M. Hull

Doctoral Dissertations

"Electrochemical deposition methods are presented for the deposition of Co(OH)₂ and Cu metal. Paper I shows the deposition of β-Co(OH)₂ on Ti through electrochemical reduction of [Co(en)₃]³⁺ to [Co(en)₃]²⁺ in 2M NaOH. The catalytic properties of the deposited Co(OH)₂ towards water oxidation is found comparable to Co₃O₄, with the surface of the Co(OH)₂ converting to CoOOH during the reaction. Paper II gives the conditions suitable for epitaxial growth of Co(OH)₂ on Au(100), Au(110), and Au(111) following the same reduction mechanism as described in Paper I. …

Modeling And Experimental Investigations On Particle Dynamic Behaviors In Laser 3d Printing With Blown Powder, Wei Li

Doctoral Dissertations

"Pre-mixed powder is frequently-used powder supply to fabricate Functional Gradient Material (FGM) by Laser 3D printing, which is also called Laser Metal Deposition (LMD). The deposited FGM composition is expected to be similar or same as supplied powder mixture. However, because pre-mixed powder has different particle densities and particle sizes, the caused particle acceleration differences can result in the separation in powder mixture. Up to now, there was no study focused on pre-mixed powders' flow behavior in LMD. The current research aims to investigate the flow behaviors of pre-mixed powder supplied for LMD through both experimental and modeling approaches. In …

Empirical Correlations Between Rock Cutting Parameters And Excavated Rock Surface Rebound Hardness, Azupuri Germanus Ayerikujei Kaba

Doctoral Dissertations

"In field excavation, cutting tools operate on rock surfaces damaged from previous tool pass, yet, average intact rock properties are often used in field project estimations. This can result in overestimation of excavation time and cost. The ability to accurately correlate the damaged rock properties to the excavation parameters means more reliable estimates of project completion time and costs, and hence improved the application of mechanical excavation technology to a wider range of civil and mining industries.

The purpose of this research was to better understand the relationship between rock cutting parameters and the excavated rock surface hardness during mechanical …

Characterization Of The Cylinderical Split Internal-Loop Photobioreactor With Scenedesmus Microalgae: Advanced Culturing, Modeling, And Hydrodynamics, Laith S. Sabri

Doctoral Dissertations

"Microalgae are fast growing photoynthetic microorganisms and it have very wide range of industrial applications such as biofuels and wastewater treatment. These cells can be grown in a wide variety of systems ranging from open culture systems (e.g., ponds) to closed culture systems of photobioreactor (e.g., airlift). The open culture systems exist in the external environment, and hence, are not intrinsically controllable. However, the microalgae production in enclosed photobioreactors faces prohibitively high production costs with special difficulty in reactor design and scale-up. The light availability and utilization efficiency in the photobioreactor in terms of design and scale-up consider as the …