Engineering Commons^™

Design And Production Of A Um Photo Album, Daniel Kennedy, David Johnson

Honors Theses

The authors would like to thank all the CME faculty and staff that made this project possible. Without their commitment to the students and the program, projects like this one would never make if off the ground. The authors would like to extend special thanks to Richard Hairston who served as a technical advisor for the project. Special thanks also the CME professors Dr. Vaughn, Dr. McClurg, and Ms. Watanabe. Their guidance was invaluable when the team found itself deep in the weeds. Lastly the authors would like to thank their amazing team that made this idea come to life. …

Inhibition Of Blood Coagulation Factor Xii: Evaluation Of Flavonoids As A Drug Candidate, Betsy Crosswhite

Honors Theses

This study investigated natural product inhibitors of blood coagulation Factor XII (FXII). FXII initiates the Kallikrein Kinin-System (KKS) within the intrinsic coagulation pathway. Increased expression of this system leads to proinflammatory and procoagulant activities. Inflammation occurs through downstream activation in the KKS. Following the activation of FXII-dependent pathway, bradykinin (BK) binds to the BK receptor 2 (B2) and produces inflammatory signaling. Abnormally increased BK can result in life threatening Hereditary Angioedema (HAE), characterized by severe reoccurring swelling. FXII is critical for pathogenic thrombosis, but is dispensable for hemostasis. This unique property of FXII makes it an attractive drug target. We …

Effects Of Motion Segment Simulation And Joint Positioning On Spinal Loads In Trunk Musculoskeletal Models, F. Ghezelbash, A. H. Eskandari, A. Shirazi-Adl, N. Arjmand, Z. El Ouaaid, A. Plamondon

Études primaires

Musculoskeletal models represent spinal motion segments by spherical joints/beams with linear/nonlinear properties placed at various locations. We investigated the fidelity of these simplified models (i.e., spherical joints with/without rotational springs and beams considering nonlinear/linear properties) in predicting kinematics of the ligamentous spine in comparison with a detailed finite element (FE) model while considering various anterior-posterior joint placements. Using the simplified models with different joint offsets in a subject-specific musculoskeletal model, we computed local spinal forces during forward flexion and compared results with intradiscal pressure measurements. In comparison to the detailed FE model, linearized beam and spherical joint models failed to …

Additive Manufacturing And Performance Of Architectured Cement-Based Materials, Mohamadreza Moini, Jan Olek, Jeffrey P. Youngblood, Bryan Magee, Pablo D. Zavattieri

Lyles School of Civil Engineering Faculty Publications

There is an increasing interest in hierarchical design and Additive Manufacturing (AM)of cement-based materials. However, the brittle behavior of these materials and the presence of interfaces from the additive manufacturing process represent the current major challenges. Our work focuses on harnessing the heterogeneous interfaces by employing clever designs from bio-inspired Bouligand architectured materials. In this paper, we aim to demonstrate some key mechanisms that can allow brittle hardened cement-based materials to gain flaw-tolerant properties. Mechanisms such as cracktwisting at the interfaces have been previously observed in naturally-occurring orsynthetic composite Bouligand architectures. In this paper, a heterogeneous interface with porous characteristics …

Perceptions Regarding Concussions In Collegiate Football At The University Of Mississippi, Madison Frerker

Honors Theses

Concussions are a form of mild traumatic brain injury (mTBI) that can occur from any force to the head or body that causes the brain to move within the skull. Concussions are common in the sport of football due to the highly physical nature of the sport, and injured athletes can experience a wide array of symptoms. Like other players participating with powerhouse football programs, those at the University of Mississippi are at risk of concussion throughout their collegiate career. Whether players and fans perceive the risks of concussion equally has not been previously studied. Considering the passionate history of …

Development Of A Scn1a Null Zebrafish Model For Screening Potential Anti-Epileptic Natural Products, Patricia Ann Lipson

Honors Theses

Epilepsy affects around 50 million people in the world. Thus, it is imperative that new more effective and safe treatments be found. This study was designed to use zebrafish to screen potential anti-epileptic natural products. We utilized two scn1Lab null zebrafish models (morpholino-injected fish where scn1Lab was transiently knocked down and a transgenic scn1Lab -/- fish line). Alternatively, we used AB wildtype fish to test compounds in a chemically-induced seizure model. Natural compounds including cannabidiol, CBD, and Tapinanthus globiferous, TG, extracts were screened for their anti-seizure activity. When scn1Lab -/- fish were treated with CBD (0.075 and 0.3 mg/L) from …

A Case Study On The Design And Optimization Of An Ethylbenzene Production Plant, William Grafton Peaster

Honors Theses

This thesis will detail two goals of my capstone design project. The first goal is to simulate a given base case of a vapor phase reaction ethylbenzene production facility in PRO/II simulation software and discretely optimize the process in order to increase the profitability of the plant. The second goal is to develop a base case process flow diagram, stream tables, utility tables, and equipment tables for an ethylbenzene facility with liquid phase reactions. The base case simulation and optimization is a group task with my assigned group members in Ch E 451. The first part of this study looks …

Pathways For Mitigating Thermal Losses In Solar Photovoltaics, Rodolphe Vaillon, Oliver Dupre, Raúl Bayoán Cal, Marc Calaf

Mechanical and Materials Engineering Faculty Publications and Presentations

To improve the performance of solar photovoltaic devices one should mitigate three types of losses: optical, electrical and thermal. However, further reducing the optical and electrical losses in modern photovoltaic devices is becoming increasingly costly. Therefore, there is a rising interest in minimizing the thermal losses. These correspond to the reduction in electrical power output resultant of working at temperatures above 25 °C and the associated accelerated aging. Here, we quantify the impact of all possible strategies to mitigate thermal losses in the case of the mainstream crystalline silicon technology. Results indicate that ensuring a minimum level of conductive/convective cooling …

Turbulence, Entrainment And Low-Order Description Of A Transitional Variable-Density Jet, Bianca Viggiano, Tamara S. Dib, N. Ali, L. G. Mastin, Raúl Bayoán Cal, S. A. Solovitz

Mechanical and Materials Engineering Faculty Publications and Presentations

Geophysical flows occur over a large range of scales, with Reynolds numbers and Richardson numbers varying over several orders of magnitude. For this study, jets of different densities were ejected vertically into a large ambient region, considering conditions relevant to some geophysical phenomena. Using particle image velocimetry, the velocity fields were measured for three different gases exhausting into air – specifically helium, air and argon. Measurements focused on both the jet core and the entrained ambient. Experiments considered relatively low Reynolds numbers from approximately 1500 to 10 000 with Richardson numbers near 0.001 in magnitude. These included a variety of …

Design And Analysis Of An Fmri-Compatible Vibrotactile Skin Stimulator, Jacob Skyler Azbell

Honors Theses

The purpose of this research project is to design a multi-purpose fMRI-compatible vibrotactile skin stimulator that can be used in varying felds of research so that a specifc design does not have to be built for each individual application. Throughout this project, several stimulator designs were produced, but the core idea for each was quite similar. In each design, a wire coil was wound on a exible plastic tape former. One point of each coil is fxed, and the opposite point provides stimulation. Each wire coil was placed in a constant magnetic feld, which provided a weaker version of the …

Process Design And Optimization: Analysis Of An Ethylbenzene Production Plant, Jonathan Butler Vanveckhoven

Honors Theses

This thesis will cover the steps I took to evaluate an ethylbenzene production plant. I, along with my senior design team, was first tasked with optimizing a vapor-phase ethylbenzene production plant based off of a given base case. Our team was able to improve the net present value of the plant from -$4.8 million to $70.4 million through discrete optimization. After the vapor-phase plant was evaluated, I was tasked with creating a base case, liquid-phase ethylbenzene production plant. I explain the theory behind process flow diagram development, then explain how I produced the process flow diagram and stream table for …

Case Study: Applying Lean Manufacturing Principles To The Prep Process Of The Hurricane Island Outward Bound School, Ben Branson

Honors Theses

This study synthesizes the author's area of education and occupational passions by applying lean manufacturing principles such as those of the Toyota Production System to the course preparation process at the Hurricane Island Outward Bound School. Over four weeks in the summer of 2017, the initial conditions were monitored and changes were implemented in both the layout of the base and the process itself, specifically the logistics portions. At the end of the season, the effectiveness of these changes were evaluated through a staff survey and comparison of evidence gathered during the summer. The time needed for prep logistics was …

Walking Gait Measurement And Gait Parameters Extraction, Chenye Li

Honors Theses

A fourth generation walking gait measurement device has been designed to capture and analyze detailed gait and stride metrics which eventually provides a Fall-Risk Assessment score. Specifically, the device has been modified to fit the residential environment and the elderly consumers which is low-cost, user-friendly, and portable. The gait parameters would be obtained by the on-board gait analysis protocol. Through gait parameters people's falling risk can then be calculated so that people can be alerted to take precautionary measures before falling. Overall, the device has been made and demonstrated having better performance than its previous generations. The on-board gait analyzing …

Product Realization Capstone: Safety Steps For The Willie Price Lab School, Christopher L. Sevigney

Honors Theses

The purpose of this document is to outline the engineering design and production development process for a safety step to be used in pre-schools. The team began by establishing customer need and moved through the design and prototyping phases. Once a design was selected, the team focused on developing a production process for the product. The project culminated in two one-hour long production runs in which the team carried out the production process to fill a customer order. The results of the first run indicated that adjustments needed to be made to the process, as the required number of pieces …

Product Realization And Lean Manufacturability Of Home Docking Station, Dillon Hall

Honors Theses

The focus of this research study was to analyze the product realization cycle, which is the process of creating, refining, manufacturing, and mass-producing a product that both fulfills customer needs and maximizes profit. This was done by utilizing the product realization life cycle to generate a product for potential customers in the University of Mississippi, city of Oxford, and Lafayette County area. The product to be researched was a home docking and organizational stand for a user's personal items like a phone, watch, keys, wallet, and other necessities. First, the conceptual design process was followed to develop customer needs and …

Experimental Validation Of An Unscented Kalman Filter For Estimating Transient Engine Exhaust Composition With Fourier Transform Infrared Spectroscopy, David Wilson, Casey Allen

Mechanical Engineering Faculty Research and Publications

Fourier transform infrared (FTIR) spectroscopy is a prevalent technique for measuring the comprehensive chemical composition of engine emissions. However, its applicability to transient emissions is limited due to recirculation of exhaust from past engine cycles within a FTIR gas cell and nonstationarity of the infrared beam intensity. An unscented Kalman filter is developed to overcome these limitations and obtain accurate, time-resolved estimations of engine exhaust composition from FTIR measurements. Residence time distribution within the FTIR gas cell is modeled using the well-mixed assumption, while the Fourier transform of an interferogram generated from a linearly evolving, uniformly broadened absorption line is …

Ambulatory Clinic Exam Room Design With Respect To Computing Devices: A Laboratory Simulation Study, Dustin T. Weiler, Tyler Satterly, Shakaib U. Rehman, Maury A. Nussbaum, Neale R. Chumbler, Gary M. Fischer, Jason J. Saleem

Faculty and Staff Scholarship

Background—Challenges persist regarding how to integrate computing effectively into the exam room, while maintaining patient-centered care. Purpose—Our objective was to evaluate a new exam room design with respect to the computing layout, which included a wall-mounted monitor for ease of (re)-positioning. Methods—In a lab-based experiment, 28 providers used prototypes of the new and older “legacy” outpatient exam room layouts in a within-subject comparison using simulated patient encounters. We measured efficiency, errors, workload, patient-centeredness (proportion of time the provider was focused on the patient), amount of screen sharing with the patient, workflow integration, and provider situation awareness. Results—There were no statistically …

Performance, Workload, And Usability In A Multiscreen, Multi-Device, Information-Rich Environment, Jason J. Saleem, Dustin T. Weiler

Faculty and Staff Scholarship

Potential benefits of multiscreen and multiple device environments were assessed using three different computing environments. A single factor, within-subject study was conducted with 18 engineering students in a laboratory experiment. Three levels for the computing environment factor included one with a desktop computer with a single monitor (control, condition A); one with a desktop with dual monitors, as well as a single tablet computer (condition B); and one with a desktop with a single monitor, as well as two tablet computers (condition C). There was no statistically significant difference in efficiency or workload when completing scenarios for the three computing …

Evaluation Of Traffic Incident Timeline To Quantify The Performance Of Incident Management Strategies, Henrick Joseph Haule

UNF Graduate Theses and Dissertations

Transportation agencies are introducing new strategies and techniques that will improve traffic incident management. Apart from other indicators, agencies measure the performance of the strategies by evaluating the incidents timeline. An effective strategy has to reduce the length of the incident timeline. An incident timeline comprises various stages in the incident management procedure, starting when the incident was detected, and ending when there is the recovery of normal traffic conditions. This thesis addresses three issues that are related to the traffic incident timeline and the incident management strategies.

First, co-location of responding agencies has not been investigated as other incident …

High Speed, Micron Precision Scanning Technology For 3d Printing Applications, Nicholas Emord

UNF Graduate Theses and Dissertations

Modern 3D printing technology is becoming a more viable option for use in industrial manufacturing. As the speed and precision of rapid prototyping technology improves, so too must the 3D scanning and verification technology. Current 3D scanning technology (such as CT Scanners) produce the resolution needed for micron precision inspection. However, the method lacks in speed. Some scans can be multiple gigabytes in size taking several minutes to acquire and process. Especially in high volume manufacturing of 3D printed parts, such delays prohibit the widespread adaptation of 3D scanning technology for quality control. The limiting factors of current technology boil …

Power Mobility Sensor Data Collection Verified Through Standardized Pediatric Assessments, Ayshka Elise Rodriguez-Velez

UNF Graduate Theses and Dissertations

The collaboration between the School of Engineering and the Department of Physical Therapy at the University of North Florida has introduced the possibility of creating a new environment for pediatric physical therapy assessments. There are currently no methods for remotely monitoring children with impairments. However, with embedded sensor technology in the form of power mobility and accepted therapy assessment tools, remote monitoring can become a possibility. As a part of this work, a ride-on toy car was developed as a remote monitoring device and a case study with a child with a mobility impairment was used as a proof of …

Towards Designing Energy Efficient Symmetric Key Protocols, Sai Raghu Talluri

UNF Graduate Theses and Dissertations

Energy consumption by various modern symmetric key encryption protocols (DES,

3-DES, AES and, Blowfish) is studied from an algorithmic perspective. The work

is directed towards redesigning or modifying the underlying algorithms for these

protocols to make them consume less energy than they currently do. This research

takes the approach of reducing energy consumption by parallelizing the

consecutive memory accesses of symmetric key encryption algorithms. To achieve

parallelization, an existing energy complexity model is applied to symmetric key

encryption algorithms. Inspired by the popular DDR3 architecture, the model assumes

that main memory is divided into multiple banks, each of which can …

3d Printed Relief Valve Analysis And Validation, John Anthony Dutcher Iii

Dissertations and Theses @ UNI

Additive Manufacturing allows for faster, lower cost product development including customization, print at point of use, and low cost per volume produced. This research uses Stereolithography produced prototypes to develop an improvement to an existing product, the internal pressure relief valve of a positive displacement pump. Four 3D printed prototype assemblies were developed and tested in this research. The relief valve assemblies consisted of additive manufacturing produced pressure vessel components, post processed, and installed on the positive displacement pump with no additional machining. Prototype designs were analyzed with Computational Fluid Dynamic simulation to increase flow through the valve. The simulation …

The Role Of Wave Self-Similarity In Nearshore Wave Spectra, Morgan M. Smith

UNF Graduate Theses and Dissertations

Nonlinear wave-wave interactions and wave breaking contribute to nearshore wave energy dissipation. These factors can be analyzed by the principles of wave self-similarity. The equilibrium range can be shown in wind-driven wave spectra that exist in the form ( ) and However, the appropriate methods used to determine this loss of energy are controversial. This study examines an approach that reinvestigates the self-similarity principles. Wave spectra with lower peak periods are dominated by nonlinear wave-wave interactions which produce a scaling in shallow water. This thesis investigates the relative role of spectral similarity in different conditions in the nearshore region of …

Soil Improvement Using Microbial Induced Calcite Precipitation And Surfactant Induced Soil Strengthening, Matthew P. Davies

UNF Graduate Theses and Dissertations

Microbially induced calcite precipitation (MICP) has been used for a number of years as a technique for the improvement of various geological materials. MICP has been used in a limited capacity in organic rich soils with varying degrees of success. Investigators hypothesized that microbially-induced cementation could be improved in organic soils by using a surfactant. Varying amounts of Sodium Dodecyl Sulfate (SDS) were added to soils of varying organic content and a mixing procedure was used to treat these soils via MICP. Treated specimens were tested for unconfined compressive strength (UCS). Results appeared to show direct relationships between SDS content …

Potential Replacement Of The Us Navy's Rapid Penetration Test With The Method Of Multichannel Analysis Of Surface Waves, William Fletcher

UNF Graduate Theses and Dissertations

The United States Navy (USN) currently utilizes a Rapid Penetration Test (RPT) on both land and in water as the means to determine whether sufficient soil bearing capacity exists for piles in axial compression, prior to construction of the Elevated Causeway System (Modular) [ELCAS(M)] pile-supported pier system. The USN desires a replacement for the RPT because of issues with the method incorrectly classifying soils as well as the need to have a less labor-and-equipment-intensive method for geotechnical investigation.

The Multichannel Analysis of Surface Waves (MASW) method is selected herein as the potential replacement for the RPT. The MASW method is …

Research Of Sustainable Jet Fuel Production Using Microbes, Rajee Olaganathan

Publications

Global climate change, coupled with rapidly increasing oil prices and energy demand around the world, has paved a way for intense research in the biofuel sector. Stakeholders in the aviation industry have started to focus on bio-jet fuel. Bio-jet fuel is regarded as a sustainable solution to greenhouse gas emissions and energy demand. This paper provides a brief review of the biofuel production technologies, the role of bacteria in producing hydrocarbons and the recent advancements in microbial engineering to enhance the biofuel production. Finally, this paper concludes by highlighting the challenges and future research implications in bio-jet fuel production.

Commercial Airline Pilots' Attitudinal Data On Controlled Rest In Position: A Qualitative Inquiry, Stephen Rice, Scott R. Winter, Emily C. Anania, Gajapriya Tamilselvan, Shawn Doherty

Publications

Fatigue is a significant contributor to accidents in aviation, in commercial, private, and military aircraft, and is defined as “extreme tiredness resulting from mental or physical exertion or illness” (Oxford Dictionary, 2017, n.p.). Typical fatigue mitigation techniques include work and rest scheduling, obtaining required minimum rest before a flight, and pharmacological countermeasures (Caldwell & Caldwell, 2005; Caldwell, Mallis, Caldwell, Paul, Miller, & Neri, 2009). However, Controlled Rest in Position (CRIP), or in-flight sleep, may be another potential way to mitigate pilot fatigue. Prior research has investigated consumer perceptions relating to CRIP, revealing unfavorable perceptions (Winter, Carryl, & Rice, 2015). However, …

Uas Pilots Code – Annotated Version 1.0, Michael S. Baum, Kristine Kiernan, Donald W. Steinman, Ryan J. Wallace Ed.D.

Publications

The UAS PILOTS CODE (UASPC) offers recommendations to advance flight safety, ground safety, airmanship, and professionalism.6 It presents a vision of excellence for UAS pilots and operators, and includes general guidance for all types of UAS. The UASPC offers broad guidance—a set of values—to help a pilot interpret and apply standards and regulations, and to confront real world challenges to avoid incidents and accidents. It is designed to help UAS pilots develop standard operating procedures (SOPs), effective risk management,7 safety management systems (SMS), and to encourage UAS pilots to consider themselves aviators and participants in the broader aviation community.

Efficient Interconnectivity Among Networks Under Security Constraint, Pankaz Das, Rezoan A. Shuvro, Mahshid Rahnamay-Naeini, Nasir Ghani, Majeed M. Hayat

Electrical and Computer Engineering Faculty Research and Publications

Interconnectivity among networks is essential for enhancing communication capabilities of networks such as the expansion of geographical range, higher data rate, etc. However, interconnections may initiate vulnerability (e.g., cyber attacks) to a secure network due to introducing gateways and opportunities for security attacks such as malware, which may propagate from the less secure network. In this paper, the interconnectivity among subnetworks is maximized under the constraint of security risk. The dynamics of propagation of security risk is modeled by the evil-rain influence model and the SIR (Susceptible-Infected-Recovered) epidemic model. Through extensive numerical simulations using different network topologies and interconnection patterns, …