Engineering Commons^™

A Data-Driven Approach For Detecting Autism Spectrum Disorders, Manika Kapoor, David Anastasiu

Faculty Publications

No abstract provided.

A Complementary Cyber-Human Systems Framework For Industry 4.0 Cyber-Physical Systems, Matthew Krugh, Laine Mears

Publications

Humans are a vital element to automotive manufacturing; however, skilled production personnel have largely been designated as data receivers in Cyber-Physical Systems (CPS) of Industry 4.0. A renewed focus on the human worker who completes significant portions of manual value-added content in automotive assembly through Cyber-Human Systems (CHS) is allowing humans to perform their jobs more safely, efficiently, and supporting enhanced control and quality monitoring of manual manufacturing tasks. There is a need for a unified complementary framework of CHS and CPS to guide the implementation of future smart manufacturing systems.

A Lightweight Classification Algorithm For Human Activity Recognition In Outdoor Spaces, Graham Mccalmont, Huiru Zheng, Haiying Wang, S. I. Mcclean, Matteo Zallio, Damon Berry

Conference Papers

The aim of this paper is to discuss the development of a lightweight classification algorithm for human activity recognition in a defined setting. Current techniques to analyse data such as machine learning are often very resource intensive meaning they can only be implemented on machines or devices that have large amounts of storage or processing power. The lightweight algorithm uses Euclidean distance to measure the difference between two points and predict the class of new records.

The results of the algorithm are largely positive achieving accuracy of 100% when classifying records taken from the same sensor position and accuracy of …

Computer Aided Drawing Software Delivered Through Emotional Learning. The Use Of Emoticons And Gifs As A Tool For Increasing Student Engagement., Matteo Zallio, Damon Berry

Conference Papers

It is known that one of the key factors for many manufacturing companies, who are involved in the design and development process, is represented by the quality of the skills, capacity and experience of computer-aided design draftsman and designers. This means that effective, up-to-date and engaging training has to be performed by teachers and instructors, since the early stage lectures for novice engineering students. When learners are engaged and actively participate in the training process, then this transfers in to a high, deep level of learning, quality of the learnt topics and perceived passion. The following question arises, “how can …

Rethinking Zoning For People: Utilizing The Concept Of The Village, Kevin Leyden, Lorraine D'Arcy

Other

In this chapter, we propose it is time to re-think and re-imagine how we approach zoning. This is especially true for suburban developments. Today, especially in the United States, zoning in suburban areas is being used to segregate and separate the component parts of our communities into distinct zones which are spread out geographically and in most cases require the daily use of an automobile. The negative consequences of this form of development for health, community and the environment are discussed. Using a study of neighborhoods in Dublin, Ireland and its suburbs we examine how professionals and the public view …

Mental Workload Assessment: Knowledge-Bases Based Upon The Features Of The Original Nasa Task Load Index, Lucas Rizzo, Luca Longo

Other resources

No abstract provided.

A Review Of Multimode Interference In Tapered Optical Fibers And Related Applications, Pengfei Wang, Haiyan Zhao, Xianfan Wang, Gerald Farrell, Gilberto Brambilla

Conference papers

In recent years, tapered optical fibers (TOFs) have attracted increasing interest and developed into a range of devices used in many practical applications ranging from optical communication, sensing to optical manipulation and high-Q resonators. Compared with conventional optical fibers, TOFs possess a range of unique features, such as large evanescent field, strong optical confinement, mechanical flexibility and compactness. In this review, we critically summarize the multimode interference in TOFs and some of its applications with a focus on our research project undertaken at the Optoelectronics Research Centre of the University of Southampton in the United Kingdom.

Engineered Nanomaterials And Human Health: Part 1. Preparation, Functionalization And Characterization (Iupac Technical Report), Vladimir Gubala, Linda J. Johnston, Harald Friedrich Krug, Colin J. Moore, Christopher K. Ober, Michael Schwenk, Michel R. Vert

Reports

Research on engineered nanomaterials (ENM) has progressed rapidly from the very early stages of studying their unique, size-dependent physicochemical properties and commercial exploration to the development of products that influence our everyday lives. We have previously reviewed various methods for synthesis, surface functionalization, and analytical characterization of ENM in a publication titled 'Engineered Nanomaterials: Preparation, Functionalization and Characterization'. In this second, inter-linked document, we first provide an overview of important applications of ENM in products relevant to human healthcare and consumer goods, such as food, textiles, and cosmetics. We then highlight the challenges for the design and development of new …

Engineered Nanomaterials And Human Health: Part 2. Applications And Nanotoxicology (Iupac Technical Report) (Review), Vladimir Gubala, Linda J. Johnston, Harald Friedrich Krug, Colin J. Moore, Christopher K. Ober, Michael Schwenk, Michel R. Vert

Reports

Research on engineered nanomaterials (ENM) has progressed rapidly from the very early stages of studying their unique, size-dependent physicochemical properties and commercial exploration to the development of products that influence our everyday lives. We have previously reviewed various methods for synthesis, surface functionalization, and analytical characterization of ENM in a publication titled 'Engineered Nanomaterials: Preparation, Functionalization and Characterization'. In this second, inter-linked document, we first provide an overview of important applications of ENM in products relevant to human healthcare and consumer goods, such as food, textiles, and cosmetics. We then highlight the challenges for the design and development of new …

A Constructivist Approach To The Use Of Case Studies In Teaching Engineering Ethics, Diana Adela Martin, Eddie Conlon, Brian Bowe

Articles

Our paper aims to explore the effectiveness of a constructivist approach to the teaching of engineering ethics through case studies, by putting forward a contextualization of the much discussed case study “Cutting Road Side Trees” (Pritchard, 1992) in light of the constructivist frame suggested by Jonassen (1999). First, we briefly analyse how the use of case studies for the teaching of engineering ethics eludes the complexity of the engineering professional environment before arguing that constructivism is a learning theory that can help to address this complexity. The final section proposes a constructivist reworking of the case method in a manner …

Nádúr Daonna (Natureza Humana): An Intervention To Work With Nature In The Intellectual Development Of First Year Engineering Students, Domhnall Sheridan, Michael Carr

Conference papers

For most of the 20th Century there has been a debate among psychologists, educationalists and others as to whether nature or nurture determined the personality and capabilities of the adult person. Only in the last decade has an answer been found for that perennial question: the adult is the product of both nature and nurture. The genotype, the genetic inheritance from parents provides a template, but the expression of the genotype, the phenotype, depends on the interaction between the individual and their environment. Nothing is written in stone: the young child beginning education has almost infinite possibilities. In order for …

Mens Sana: An Investigation Into The Relationship Between Psychological Traits And Academic Success Of First Year Engineering Students, Domhnall Sheridan, Michael Carr

Conference papers

In 1904, the French government asked the psychologist Alfred Binet to devise a general test of intelligence that could be used to identify pupils who were behind their age cohort, in order to give them extra help to bring their level up to that of their peers. For most of the 20th century, intelligence testing has played a major role in education, unfortunately to categorize pupils at an early stage in the life, rather than to help them. In the last two decades, much work has been done in broadening the testing of students, especially in examining the relationship between …

A Comparative Study Of Chisel For Fpga Design, Paul Lennon, Richard Gahan

Conference Papers

This paper presents the results of a comparative study conducted into designing with the Chisel hardware construction language against the Verilog hardware description language across a range of standard-library and bespoke FPGA design components including an N-bit FIFO, a round-robin arbiter and a complex, scalable arbiter. Comparison metrics such as maximum operating frequency, silicon area, design flow run-time, source-code density and maintainability, simulation run-time and speed of coding are employed to evaluate the merits of designing with Chisel. Each component is implemented with a deep low-level hardware understanding with an aim to evaluate the merits of designing with Chisel from …

A Bioreactor For Conditioning Tissue Engineered Heart Valves, Claire Brougham, Francisco Almeida, Fergal J O'Brien

Other resources

No abstract provided.

Introducing A New Cement Hydration And Microstructure Model, Niall Holmes

Articles

This paper presents a new cement hydration model (HYDCEM) to predict the microstructure evolution of hydrating tricalcium silicate (C3S). The model is written in MATLAB and employs the continuum approach and integrated particle kinetics relationships to show the change in C3S and the growth of Calcium Silicate Hydrate (C-S-H) and Calcium Hydroxide (CH) in the pore space over time. Cement hydration is a highly complex process. While hydration models should never completely remove experimental analysis, they are an aid to better understand cement hydration and microstructure development by providing a method to analyse a large number of pastes with different …

A Rupture Limit Equation For Pre-Loaded Composite Plates, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Fiber-reinforced polymer composites offer inherent advantages over traditional metallic materials in a number of different ways; however, these materials are also highly susceptible to impact damage. In this paper, we explore the response of FRP (fiber reinforced polymer) composites under impact conditions that could result in their rupture or catastrophic failure. The work performed was aimed at developing a general, data-driven equation for initially-stressed, flat, composite plates that would differentiate between impact conditions that would result in only a hole or crack and those which would cause catastrophic plate failure or rupture. If this equation were to be subsequently shown …

Design And Analysis Of Class Ef2 Inverter For Driving Transmitting Printed Spiral Coil, Mohammad Haerinia, Ebrahim S. Afjei

Electrical Engineering Student Publications

This paper studies a high frequency inverter for low power applications at a short distance. Class 𝐸𝐹2 inverter is selected and designed as a transmitting driver. A printed spiral coil is designed as a transmitting coil and is connected to the high frequency inverter. Experimental results are obtained to compare with simulation results. The experiment and simulation are in good agreement and the circuit design is verified. Operating frequency is 2.75 MHz. Maximum flux density is generated by transmitting coil is measured 149uT.

Modernizing Aging Pipe Infrastructure In Irrigation Districts, Charles M. Burt, Kyle Feist, Zachary Markow

BioResource and Agricultural Engineering

Many irrigation and water districts in California convey water through aging concrete pipelines. In addition to huge problems with leaks and failures, districts also struggle to provide turnout deliveries with more flexible schedules. This paper discusses the problems that are encountered, and various approaches that have been or can be used. The specific pipeline designs that are discussed in this paper are generally gravity flow, flowing downhill from a canal. Most of these pipelines were originally installed under the assumptions that farmers would need high flows at low pressures for surface irrigation.

Annual Report 2017-2018, Depaul University College Of Computing And Digital Media

CDM Annual Reports

LETTER FROM THE DEAN

I am pleased to share with you the College of Computing and Digital Media’s (CDM) 2017-18 annual report, highlighting the many achievements across our community. It was a big year. We began offering five new programs (two bachelor’s, two master’s, and one PhD) across our three schools, in addition to several new certificate programs through our Institute for Professional Development. We built new, cutting-edge spaces to support these and other programs— most notably a 4,500 square-foot makerspace, a robotics and medical engineering lab, an augmented and virtual reality lab, and plans for a cyber-physical systems project …

Inherent Operational Characteristics Aided Fuzzy Logic Controller For A Variable Speed Direct Expansion Air Conditioning System For Simultaneous Indoor Air Temperature And Humidity Control., Huaxia Yan, Yudong Xia, Xiangguo Xu, Shiming Deng

Faculty of Science & Technology (THEi)

Direct expansion air conditioning systems are widely installed in small-to medium- scale buildings due to their advantages of simple configuration, high energy efficiency and low cost to own and maintain. The two main targets of air conditioning operation include improving the system operational efficiency and energy efficiency. Stable system operational efficiency is directly related with the operation of electronic expansion valves and degree of superheat at the outlet of evaporator. In this paper, an adaptive DS controller is developed to improve the system operational efficiency based the experimental performance of a DX A/C system and reported. The adaptive DS controller …

Energy-Efficient And -Economic Technologies For Vapor Compression Refrigeration Systems: A Comprehensive Review., Xiaohui She, Lin Cong, Binjian Nie, Guanghui Leng, Hao Peng, Yi Chen, Xiaosong Zhang, Tao Wen, Hongxing Yang, Yimo Luo

Faculty of Science & Technology (THEi)

Vapor Compression Refrigeration Systems (VCRS) are widely used to provide cooling or freezing for domestic/office buildings, supermarkets, data centres, etc., which expend 15% of globally electricity and contribute to ∼10% of greenhouse gas emissions globally. It is reported that cooling demand is expected to grow tenfold by 2050. Therefore, it is critical to improve the efficiency of the VCRS. In this paper, a comprehensive review of advanced and hot technologies is conducted for the VCRS. These technologies include radiative cooling, cold energy storage, defrosting and frost-free, temperature and humidity independent control (THIC), ground source heat pump (GSHP), refrigerant subcooling, and …

Investigation On The Regeneration And Corrosion Characteristics Of An Anodized Aluminum Plate Regenerator., Tao Wen, Lin Lu, Hongxing Yang, Yimo Luo

Faculty of Science & Technology (THEi)

The traditional vapor compression cooling system (VCS) has been criticized for its heavy reliance on electricity consumption and limited control ability of humidity. Compared with the VCS, the liquid desiccant cooling system (LDCS) is more efficient by handling the sensible and latent load separately. The present study investigated the regeneration and corrosion characteristics of an anodized aluminum plate regenerator for the first time. Comparative tests were conducted to present the regeneration and corrosion characteristics of the normal and anodized regenerator. The influence of internal heating on the regeneration performance was also identified. The results showed that the corrosion rate was …

Investigation On The Regeneration Performance Of Liquid Desiccant By Adding Surfactant Pvp-K30., Tao Wen, Lin Lu, Chuanshuai Dong, Yimo Luo

Faculty of Science & Technology (THEi)

The liquid desiccant cooling system (LDCS) is a promising alternative for the conventional vapor compression system due to its high energy efficiency. To enhance the mass transfer between the regeneration air and liquid desiccant in the regenerator, the paper firstly introduced a kind of surfactant called polyvinyl pyrrolidone (PVP-K30) which was added into the LiCl solution for better desiccant regeneration performance. The falling film characteristics and regeneration performance were investigated and compared with and without surfactant. The results indicated that the contact angle of desiccant solution on plate decreased from 58.5° to 28.0° by adding surfactant with 0.4% of concentration. …

An Analysis Of Student Experiences With Concept Mapping In A Foundational Undergraduate Engineering Course, Ning Fang

Engineering Education Faculty Publications

Concept mapping is a powerful graphical technique for helping learners organize knowledge and visualize connections and relationships between relevant concepts. The present study is an investigation of student experiences with concept mapping in a foundational undergraduate engineering course titled Engineering Dynamics. A total of 165 undergraduate engineering students from two recent semesters participated in the present study. This paper provides representative examples of student-generated concept maps. Student comments collected at the end of each semester were analyzed using content analysis. Students provided positive feedback, for example, concept mapping helped students make connections between concepts; reviewed what students had learned; visualized, …

Failure Of The Alexander Dam Embankment And Reconstruction Using Drainage Mitigation On Kauai, Hawaii, 1930-1932, Kerry D. Cato, J. David Rogers

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alexander Dam is a hydraulic fill earth dam and the second-highest embankment dam in Hawaii, having been built in 1929-1932 on the south side of the Hawaiian island of Kauai to provide irrigation for McBryde Sugar Company Ltd. It was constructed across Wahiawa Stream mauka (Hawaiian for "stream that comes from the mountains," literally "toward the mountains"), upstream of Kalaheo, to store 800 million gallons (5 million m3) of water to irrigate sugarcane fields. The embankment dam was intended to have a maximum height of 125 ft (38 m), a crest length of 620 ft (189 m), and a maximum …

Decoupling Of Second-Order Linear Systems By Isospectral Transformation, Daniel Kawano, Rubens Salsa, Fai Ma

Faculty Publications - Mechanical Engineering

No abstract provided.

Partitioning Of Pcbs From Air To Clothing Materials In A Danish Apartment, Glenn Morrison, H. V. Andersen, L. Gunnarsen, D. Varol, E. Uhde, B. Kolarik

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Polychlorinated biphenyl (PCB) contamination of buildings continues to pose an exposure threat, even decades after their application in the form of calks and other building materials. In this research, we investigate the ability of clothing to sorb PCBs from contaminated air and thereby influence exposure. The equilibrium concentration of PCB-28 and PCB-52 was quantified for nine used clothing fabrics exposed for 56 days to air in a Danish apartment contaminated with PCBs. Fabric materials included pure materials such as cotton and polyester, or blends of polyester, cotton, viscose/rayon, and/or elastane. Air concentrations were fairly stable over the experimental period, with …

Tolle Lege Works Published In 2018, Mcquade Library

Bibliographies

Compiled Tolle Lege bibliography of works published by members of the Merrimack College Community in 2018. Works include journal articles, books, book chapters, conference presentations and posters, and more.

Verifying Data-Oriented Gadgets In Binary Programs To Build Data-Only Exploits, Zachary David Sisco

Browse all Theses and Dissertations

Data-Oriented Programming (DOP) is a data-only code-reuse exploit technique that "stitches" together sequences of instructions to alter a program's data flow to cause harm. DOP attacks are difficult to mitigate because they respect the legitimate control flow of a program and by-pass memory protection schemes such as Address Space Layout Randomization, Data Execution Prevention, and Control Flow Integrity. Techniques that describe how to build DOP payloads rely on a program's source code. This research explores the feasibility of constructing DOP exploits without source code-that is, using only binary representations of programs. The lack of semantic and type information introduces difficulties …

A Semantically Enhanced Approach To Identify Depression-Indicative Symptoms Using Twitter Data, Ankita Saxena

Browse all Theses and Dissertations

According to the World Health Organization, more than 300 million people suffer from Major Depressive Disorder (MDD) worldwide. PHQ-9 is used to screen and diagnose MDD clinically and identify its severity. With the unprecedented growth and enthusiastic acceptance of social media such as Twitter, a large number of people have come to share their feelings and emotions on it openly. Each tweet can indicate a user's opinion, thought or feeling. A tweet can also indicate multiple symptoms related to PHQ-9. Identifying PHQ-9 symptoms indicated by a tweet can provide crucial information about a user regarding his/her depression diagnosis. The current …