Engineering Commons^™

Heat, Charge And Spin Transport Of Thin Film Nanostructures, Devin John Wesenberg

Electronic Theses and Dissertations

Understanding of fundamental physics of transport properties in thin film nanostructures is crucial for application in spintronic, spin caloritronics and thermoelectric applications. Much of the difficulty in the understanding stems from the measurement itself. In this dissertation I present our thermal isolation platform that is primarily used for detection of thermally induced effects in a wide variety of materials. We can accurately and precisely produce in-plane thermal gradients in these membranes, allowing for thin film measurements on 2-D structures. First, we look at thermoelectric enhancements of doped semiconducting single-walled carbon nanotube thin films. We use the Wiedemann-Franz law to calculate …

Robust Distributed Stabilization Of Interconnected Multiagent Systems, Vahid Rezaei

Electronic Theses and Dissertations

Many large-scale systems can be modeled as groups of individual dynamics, e.g., multi-vehicle systems, as well as interconnected multiagent systems, power systems and biological networks as a few examples. Due to the high-dimension and complexity in configuration of these infrastructures, only a few internal variables of each agent might be measurable and the exact knowledge of the model might be unavailable for the control design purpose. The collective objectives may range from consensus to decoupling, stabilization, reference tracking, and global performance guarantees. Depending on the objectives, the designer may choose agent-level low-dimension or multiagent system-level high-dimension approaches to develop distributed …

Optimal Planning Of Microgrid-Integrated Battery Energy Storage, Ibrahim S. Alsaidan

Electronic Theses and Dissertations

Battery energy storage (BES) is a core component in reliable, resilient, and cost-effective operation of microgrids. When appropriately sized, BES can provide the microgrid with both economic and technical benefits. Besides the BES size, it is found that there are mainly three planning parameters that impact the BES performance, including the BES integration configuration, technology, and depth of discharge.

In this dissertation, the impact of each one of these parameters on the microgrid-integrated BES planning problem is investigated. Three microgrid-integrated BES planning models are developed to individually find the optimal values for the aforementioned parameters. These three microgrid-integrated BES planning …

Developing An Affect-Aware Rear-Projected Robotic Agent, Ali Mollahosseini

Electronic Theses and Dissertations

Social (or Sociable) robots are designed to interact with people in a natural and interpersonal manner. They are becoming an integrated part of our daily lives and have achieved positive outcomes in several applications such as education, health care, quality of life, entertainment, etc. Despite significant progress towards the development of realistic social robotic agents, a number of problems remain to be solved. First, current social robots either lack enough ability to have deep social interaction with human, or they are very expensive to build and maintain. Second, current social robots have yet to reach the full emotional and social …

Force-Canceling Mixer Algorithm For Vehicles With Fully-Articulated Radially Symmetric Thruster Arrays, Joseph Nicholas Casabona

Electronic Theses and Dissertations

A new type of fully-holonomic aerial vehicle is identified and developed that can optionally utilize automatic cancellation of excessive thruster forces to maintain precise control despite little or no throttle authority. After defining the physical attributes of the new vehicle, a flight control mixer algorithm is defined and presented. This mixer is an input/output abstraction that grants a flight control system (or pilot) full authority of the vehicle's position and orientation by means of an input translation vector and input torque vector. The mixer is shown to be general with respect to the number of thrusters in the system provided …

Providing Protection To Programmers' Works: Disregard The Merger Doctrine And Adopt The Application Approach, Akshay Jain

Catholic University Journal of Law and Technology

In today’s technological landscape, computer programs are one of the most highly complex and popular inventions. However, they still receive little or sometimes no legal protection. As a consequence, programmers are reluctant to create new programs, discouraging innovation and preventing the public to benefit from using these inventions. If the court does afford them copyright protection, they may still not receive legal damages for copyright infringement because the court would not consider their program registered under the Copyright Act of 1976.

This Comment argues for greater copyright protection for programs by disregarding the merger doctrine, which does not provide protection …

Recommender Systems For Large-Scale Social Networks: A Review Of Challenges And Solutions, Magdalini Eirinaki, Jerry Gao, Iraklis Varlamis, Konstantinos Tserpes

Faculty Publications

Social networks have become very important for networking, communications, and content sharing. Social networking applications generate a huge amount of data on a daily basis and social networks constitute a growing field of research, because of the heterogeneity of data and structures formed in them, and their size and dynamics. When this wealth of data is leveraged by recommender systems, the resulting coupling can help address interesting problems related to social engagement, member recruitment, and friend recommendations.In this work we review the various facets of large-scale social recommender systems, summarizing the challenges and interesting problems and discussing some of the …

Engineering Research Review 2018, Office Of Engineering Research

Engineering Research Review

Contents:
[Page] 2 Removing disinfection byproducts from wastewater protects ecosystem, human health
[Page] 4 Statisticians help Sanford increase effectiveness of weight-loss program
[Page] 6 Asphalt research helps make South Dakota roads more durable
[Page] 8 Microscopes give macro, micro, nano view of materials
[Page] 14 Researcher develops 3D printing for biomedical, space applications
[Page] 16 Grantswinship Awards
[Page] 17 Engineering Awards

Inspire Newsletter Spring 2018, Missouri University Of Science And Technology. Inspire - University Transportation Center

INSPIRE Newsletters

No abstract provided.

Minimizing Commute Distance For Small Groups: A Linear Programming Approach, Kevin Payne, Kritika Kumari, Levi Huddleston, Rabi Hassan

Engineering and Technology Management Student Projects

This paper aims to minimize total drive time between members and their respective group leader. Given a limit on group size and days available, how can a formulation of a group occur such that the sum of the total drive time is minimized. To accomplish this task a Linear Program (LP) is implemented that includes three sets of binary decisions variables summing to 4100 variables and a variety of constraints summing between 4200 and 4341 depending on the constraints enforced. For 200 members and 15 leaders the minimized average commuting time was found to be between 4.99 and 5.36 minutes …

Atomic Layer Deposition Of Molybdenum Disulfide Films Using Mof6 And H2S, Steven Letourneau, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

Molybdenum sulfide films were grown by atomic layer deposition on silicon and fused silica substrates using molybdenum hexafluoride (MoF₆) and hydrogen sulfide at 200 °C. In situ quartz crystal microbalance (QCM) measurements confirmed linear growth at 0.46 Å/cycle and self-limiting chemistry for both precursors. Analysis of the QCM step shapes indicated that MoS₂ is the reaction product, and this finding is supported by x-ray photoelectron spectroscopy measurements showing that Mo is predominantly in the Mo(IV) state. However, Raman spectroscopy and x-ray diffraction measurements failed to identify crystalline MoS₂ in the as-deposited films, and this might result …

Evaluating The Application Of Microbial Induced Calcite Precipitation Technique To Stabilize Expansive Soils, Bhaskar Chittoori, Sikha Neupane

Civil Engineering Faculty Publications and Presentations

Expansive soils, also known as swell-shrink soils have been a problem for civil infrastructures including roads and foundations from ancient times. The use of chemical additives such as cement and lime to stabilize expansive soils is a common practice among geotechnical engineers, especially for lightly loaded structures. However, several occurrences of subgrade failures have been observed after stabilizing with chemical additives. Hence, engineers are in search of sustainable stabilization alternatives. Microbial Induced Calcite Precipitation (MICP) is gaining attention as an environmentally friendly soil improvement technique. Several researchers have successfully tested its feasibility in mitigating liquefaction-induced problems in sandy soils. In …

Control And Optimization Of Power In Llc Converter Using Phase Control, Nagasri Kollipara

Browse all Theses and Dissertations

LLC resonant converters are popular among resonant topologies due to their high efficiency and ability to achieve ZVS and ZCS for wide input range. LLC resonant converters are controlled by frequency modulation (FM), which makes converter difficult to optimize the system in terms of achieving efficient power conversion. FM technique also generate wide range of harmonics which leads to a wide sweep in operating frequency, which can run into regulatory EMI test limits and cause electromagnetic compatibility issues. The performance of LLC topology extends to their poor efficiency at lighter loads, due to constant high magnetization current. In order to …

Shearing Energy, Jason Wittig

All Undergraduate Projects

Title by Author: Shear Energy by Jason Wittig

Abstract/Artists Statement: Efficiency, function, and weight of fruit-tree pruning devices are scrutinized very closely by the purchasing end user. Efficiency, being the most valuable quality to focus on; an efficient cutting device can lead to smaller batteries and lighter materials on the tree pruner. The objective of this project was to produce a cutting head that surpassed the benchmark device by 10% in four categories: Axial cutting “green-wood,” Axial cutting “dry-wood,” Axial opening force, and Handle twisting torque. The benchmark’s use of the “scissor-type” design was changed to a double bypass anvil …

Asme Rc Baja Car Drive-Train And Differential, Maverick Reddaway

All Undergraduate Projects

Every year, the American Society of Mechanical Engineers holds a RC Baja Car Competition. Students from the region are required to design, build, and compete in the annual competition. The purpose of this project and the focus of this report was to build a drivetrain for an RC car, following the guidelines outlined by ASME, to compete in their annual competition. The drivetrain must convert power from a brushed electric motor to the wheels of the car. Gear analysis was used to calculate the power reduction required by the gears in the drive train. The drive train must reduce the …

Adapt At Semeval-2018 Task 9: Skip-Gram Word Embeddings For Unsupervised Hypernym Discovery In Specialised Corpora, Alfredo Maldonado, Filip Klubicka

Other resources

This paper describes a simple but competitive unsupervised system for hypernym discovery. The system uses skip-gram word embeddings with negative sampling, trained on specialised corpora. Candidate hypernyms for an input word are predicted based on cosine similar- ity scores. Two sets of word embedding mod- els were trained separately on two specialised corpora: a medical corpus and a music indus- try corpus. Our system scored highest in the medical domain among the competing unsu- pervised systems but performed poorly on the music industry domain. Our approach does not depend on any external data other than raw specialised corpora.

An Energy-Based Approach To Assess And Predict Erosive Airfoil Defouling, Arthur Rudek, Thomas-Alexander Zitzmann, Geral Russ, Barry Duignan

Articles

A dynamic indentation experiment is presented for assessment of the adhesive behavior of a range of coatings in erosive defouling of commercial aircraft engines using CO2 dry-ice. A series of experiments is presented in which particles made from a reference material (polyoxymethylene – POM) and from CO2 dry-ice are made to impact compressor airfoils under a range of impact angle and velocity conditions. The airfoils investigated are coated with an indicator material (PTFE), which is typically used to visualise the defouling effect in large scale compressor defouling experiments. In addition, fouled compressor airfoils taken from service and coated with a …

Integrated Analysis Of The Value Of Wetland Services In Coastal Adaptation; Methodology And Case Study Of Hampton-Seabrook Estuary, New Hampshire, Paul Kirshen, Semra Aytur, David M. Burdick, Diane Foster, Tom Lippmann, Ellen Douglas, Sydney Nick, Chris Watson

Jackson Estuarine Laboratory

The present impacts from coastal storms and high tides grow significantly over time due to SLR even over the relatively short period to 2060. Hydrodynamic model simulations of storm surge with and without sea level rise scenarios show that although flooding and inundation increases with increasing subtidal forcing and higher sea level, dissipation of the tide and storm surge in the estuary channel somewhat limits the maximum inundation that might otherwise be expected in the back marsh areas. The estuary is dominated by high marsh, which lies high in the intertidal zone and by 2060 it will convert to mostly …

Modeling And Simulation Of Inductive-Based Wireless Power Transmission Systems, Mohammad Haerinia

Electrical Engineering Student Publications

This chapter studies an inductive-based wireless power transfer system for low-power applications at short distances. The transferring power system has been modeled, simulated and analyzed via finite element method. A wireless power transfer system includes important parts such as coil, core and driver. In this chapter, the important parts of an inductive power transfer system have been analyzed. Receiving and transmitting printed spiral coils are designed in an optimized procedure. The experimental results were in a good agreement with the simulation results. Moreover, based on the performed modulation and simulation the use of the pot core as the receiving core …

Mechanistic Insight Into The Degradation Of Nitrosamines Via Aqueous-Phase Uv Photolysis Or A Uv-Based Advanced Oxidation Process: Quantum Mechanical Calculations, Daisuke Minakata, Erica Coscarelli

Department of Civil, Environmental, and Geospatial Engineering Publications

Nitrosamines are a group of carcinogenic chemicals that are present in aquatic environments that result from byproducts of industrial processes and disinfection products. As indirect and direct potable reuse increase, the presence of trace nitrosamines presents challenges to water infrastructures that incorporate effluent from wastewater treatment. Ultraviolet (UV) photolysis or UV-based advanced oxidation processes that produce highly reactive hydroxyl radicals are promising technologies to remove nitrosamines from water. However, complex reaction mechanisms involving radicals limit our understandings of the elementary reaction pathways embedded in the overall reactions identified experimentally. In this study, we perform quantum mechanical calculations to identify the …

Proactive Coordination In Healthcare Service Systems Through Near Real-Time Analytics, Seung Yup Lee

Wayne State University Dissertations

The United States (U.S.) healthcare system is the most expensive in the world. To improve the quality and safety of care, health information technology (HIT) is broadly adopted in hospitals. While EHR systems form a critical data backbone for the facility, we need improved 'work-flow' coordination tools and platforms that can enhance real-time situational awareness and facilitate effective management of resources for enhanced and efficient care. Especially, these IT systems are mostly applied for reactive management of care services and are lacking when they come to improving the real-time "operational intelligence" of service networks that promote efficiency and quality of …

Effect Of Polypropylene Fiber Reinforcement On The Consolidation, Swell And Shrinkage Behavior Of Lime Blended Expansive Soil, Arif Ali Baig Moghal, Bhaskar C.S. Chittoori, B. Munwar Basha

Civil Engineering Faculty Publications and Presentations

In this article, synthetic fibers in the presence of lime stabilization are proposed as an alternative to overcome the issues related to shrink-swell distress in expansive soils. Two types of synthetic fibers, Fiber Cast® (FC) and Fiber Mesh® (FM), were studied by conducting one dimensional fixed ring Oedometer swell-consolidation and bar linear shrinkage tests. Three dosages (0.2, 0.4 and 0.6% percent by weight of soil) and two lengths of the fibers (6 and 12 mm) were evaluated with and without lime treatments. The results indicated that FC fibers had better swell restricting performance in the absence of lime treatment, while …

Enhancing Set-Based Design To Engineer Resilience For Long-Lived Systems, Gregory Hartman

Wayne State University Dissertations

At the heart of Set-Based Design is the concept that down-select decisions are deferred until sufficient information is available to make a decision, i.e., a set of possible solutions is maintained. Due to the extended service lives of many of our current and future systems, the horizon for accurately predicting the system’s requirement is shorter than the service life, so the needed information to down-select to a single optimized solution is unavailable at the time of fielding. Set-Based Design can, however, be extended to explicitly carry a set of possible solutions past the point of the initial fielding of the …

Effects Of Backpack Type On Kinematics Of The Lower Back During Walking And Jogging, Cazmon Suri

Theses and Dissertations--Biomedical Engineering

Heavy backpacks have been suggested to have a pathogenic role in experience of low back pain among children. We have conducted a repeated-measure study to investigate the backpack-induced changes in lumbo-pelvic coordination of forty gender-balanced college age students when they walked and jogged on a treadmill with two different types of backpacks: normal and ergonomically modified. The backpack-induced changes in lumbo-pelvic coordination were larger when carrying an ergonomically modified vs. a normal backpack as well as when jogging versus walking. The larger changes in lumbo-pelvic coordination when carrying an ergonomically modified backpack were likely due to kinematic restraints imposed by …

Content-Based Clustering And Visualization Of Social Media Text Messages, Sydney A. Barnard

Browse all Theses and Dissertations

Although Twitter has been around for more than ten years, crisis management agencies and first response personnel are not able to fully use the information this type of data provides during a crisis or natural disaster. This thesis addresses clustering and visualizing social media data by textual similarity, rather than by only time and location, as a tool for first responders. This thesis presents a tool that automatically clusters geotagged text data based on their content and displays the clusters and their locations on the map. It allows at-a-glance information to be displayed throughout the evolution of a crisis. For …

Measurement Of Unsteady Characteristics Of Endwall Vortices Using Surface-Mounted Hot-Film Sensors, Emma Michelle Veley

Browse all Theses and Dissertations

High-lift low-pressure turbine blades produce significant losses at the junction with the endwall. The losses are caused by several complex three-dimensional vortical flow structures, which interact with the blade suction surface boundary layer. This study investigates the unsteady characteristics of these endwall flow structures on a highly loaded research profile and the adjacent endwall using surface-mounted hot-film sensors. Experiments were conducted in a low-speed linear cascade wind tunnel. The front-loaded blade profile was subjected to three different inlet conditions, consisting of two turbulence levels, and three incoming boundary layer thicknesses. Multiple surface-mounted hot-film sensors were installed throughout the passage. This …

Electronic And Crystalline Characteristics Of Mixed Metal Halide Perovskite Semiconductor Films, Patrick Joseph Cleaver

Browse all Theses and Dissertations

Solar technology has a long history of incremental improvements in cost, reliability and efficiency. However, solar cells based on lead halide perovskite films have made more rapid leaps forward in the past 10 years, making it the fastest growing solar technology in terms of efficiency. Leaders in academia and industry continue to find success in overcoming manufacturability and stability issues, but have not yet discovered a high-efficiency perovskite film without the use of toxic lead. Probing less toxic analogs to the highly efficient lead halide, a series of thin films with perovskite structures, i.e. A2BB’X6 where A = Cs or …

Examination Of Gain Scheduling And Fuzzy Controllers With Hybrid Reachability, Aaron W. Fifarek

Browse all Theses and Dissertations

Modern aircraft with nonlinear flight envelopes predominately utilize gain scheduled controllers to provide stability of flight. Using gain scheduled control techniques, nonlinear envelopes can be linearized into collections of linear systems that operate under various system dynamics. Linear controllers approximate the nonlinear response over setpoints of operating conditions which allow traditional linear theory to be applied to maintain stability. Techniques to prove linear stability are well understood and realized in control systems, but when controllers are switched, interpolation methods must be used. Interpolation is necessary as gain scheduled systems do not have foundational switching paradigms as part of their realization …

Analyzing A Shopper’S Visual Experience In A Retail Store And The Impact On Impulse Profit, Bradley Robert Guthrie

Browse all Theses and Dissertations

The retail industry in the U.S. contributed 1.14 trillion in value added (or 5.9%) to the GDP in 2017, an increase of 3.7% from the previous year. While store closures have dominated the news in the recent past (e.g., Toys-R-Us, Sears, and Bon-Ton) due to ineffective supply chain practices, inadequate in-store experiences, and competition from e-tailers, other retailers such as Ross, T. J. Maxx, Burlington Coat Factory, and Kroger have been expanding their footprint. Brick-and-mortar stores are unique as they allow shoppers the ability to see, touch, and try products, in addition to exploring new products. Kohl’s CEO has even …

Influence Of Fdm Build Parameters On Tensile And Compression Behaviors Of 3d Printed Polymer Lattice Structures, Sai Avinash Yadlapati

Browse all Theses and Dissertations

This research focuses on the compression and tensile behavior of three-dimensional printed polymer lattice structures with different printing parameters such as build orientation, infill density, and layer thickness. The body-centered cubic (BCC) lattice unit cell, which has been extensively investigated for energy absorption applications, is considered here to create compression and tensile specimens. Special test fixture was designed and developed to perform the tensile tests. The specimens were printed using Acrylonitrile Butadiene Styrene (ABS) polymer material on a Stratasys uPrint 3D printer. The printing parameters considered in this case are: (a) Three different build orientations (0, 45 and 90 degrees); …