Engineering Commons^™

Fdm Machine Learning: An Investigation Into The Utility Of Neural Networks As A Predictive Analytic Tool For Go Around Decision Making, John Bro

Journal of Applied Sciences and Arts

Loss-of-control events during the approach-to-landing phase of flight account for a large share of fatalities in general aviation. During this critical transition towards the runway it is essential that an aircraft is stabilized. Pilot discretion and judgment is used to determine if an aircraft is suited to either land or go-around, based on an assessment of approach conditions. Many landing incidents and accidents could be prevented with improved go-around decisions. The purpose of this research is to investigate the utility of neural networks in modeling those decisions using historic aircraft flight data. Data collected from nearly 2,000 hours of training …

Performance Results Of Using Waste Vegetable Oil Based Biodiesel Fuel In A Turboshaft Gas Turboshaft Engine, Donald Bartlett 5218591, Blaine M. Heisner

Journal of Applied Sciences and Arts

Biodiesel is a renewable fuel product made from triglycerides with properties similar to petroleum-based fuel. It is blended with various petroleum fractions to produce automotive and transportation fuels and is not typically utilized as a standalone fuel. Biodiesel can be manufactured from various feedstock including straight vegetable oils (SVO), waste vegetable oils (WVO), and animal fats. Although most U.S. biodiesel is made from SVO, using WVO feedstock is a much cheaper option. As biodiesel fuel offers certain advantages over petroleum based fuels, the aviation industry has gradually advanced the use of the fuel in gas turbine engines. However, increased viscosity …

Electric Vehicle Interaction At The Electrical Circuit Level, Florida Solar Energy Center, Shawyun Sariri

FSEC Energy Research Center®

A large growth in energy demand has increased renewable energy penetration into existing power grid infrastructures, as well as spurring increased research into demand response programs. But before implementing an efficient demand response program, it is first necessary to understand the power usage behaviors of a consumer. This paper presents a real-time data acquisition system for the collection and storage of power data that will allow the study of demand response in an urban area, which can be applied to the efficient use of electric vehicle supply equipment (EVSE). Demand response programs are an ideal alternative to costly energy storage …

Assessment And Comparison Of Aviation Manufacturing Industries Throughout Mexico And Brazil, Omar E. Morsi, Kelly A. Whealan-George, Aaron D. Clevenger

International Journal of Aviation, Aeronautics, and Aerospace

This literature review serves to provide insight and understanding in regards to the evolving aviation manufacturing industry throughout the globe and more specifically, Mexico and Brazil. Increased demand for aircraft units both in the commercial and private sectors have led to unprecedented expansions in aircraft manufacturing across the industry. In order to illuminate certain potentials and current growth levels of such industries, this review will delve into an array of information and specifications in regards to economic, political, and cultural influences throughout both Mexican and Brazilian markets respectively. In conclusion, the review will identify the transformation of an aviation manufacturing …

Opty: Software For Trajectory Optimization And Parameter Identification Using Direct Collocation, Jason K. Moore, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

opty is a tool for describing and solving trajectory optimization and parameter identification problems based on symbolic descriptions of ordinary differential equations and differential algebraic equations that describe a dynamical system. The motivation for its development resides in the need to solve optimal control problems of biomechanical systems. The target audience is engineers and scientists interested in solving nonlinear optimal control and parameter identification problems with minimal computational overhead.

Corrosion-Resistant Coatings And Methods Using Polyureasil Precursors, Vijaykumar M. Mannari

Patents

The disclosure relates to curable polyureasil compounds, methods related to curing of such compounds via hydrolysis and/or condensation to form coatings on a substrate, and coated articles formed from the curable polyureasil compounds. The polyureasil compounds are generally hydrocarbon- based, including multiple urea groups and multiple hydrolysable silyl groups per molecule. The hydrolysable silyl groups can be hydrolyzed and subsequently condensed to provide a networked polymeric structure with siloxane/ urea linkages between polyureasil compound precursors to form a cured polyureasil composition useful as a coating for a substrate, in particular an anti-corrosion coating for a metallic substrate.

Spot-R By Triax, Purdue Ect Team

ECT Fact Sheets Archive

Triax’s Spot-r system was developed to tackle the construction industry’s unique safety and productivity challenges, stemming from a demonstrated lack of total jobsite visibility and automatically collected, easily accessible field data. Spot-r by Triax combines a proprietary mesh network with sensor technology to record and transmit previously unattainable workforce and equipment location, activity and safety data within a defined area – all in real-time.

The Spot-r network is installed around the site and operates in a 900 MHz network, with a subset using a cellular connection to forward Spot-r sensor data to Triax’s custom, cloud dashboard. In the hazardous construction …

Preparation And Characterization Of Nanocellulose And Its Application In Composite Materials, Xiuxuan Sun

LSU Doctoral Dissertations

Transparent cellulose films from 2,2,6,6-tetramethylpiperidine-1-oxyl radical oxidized cellulose nanocrystals (TOCNs) and 64 wt% sulfuric acid treated cellulose nanocrystals (SACNs) were prepared from bleached wood pulps. Film morphology, optical, mechanical, thermal, and surface wettability properties were characterized and compared. The results showed that TOCNs and SACNs had different average length, diameter, and aspect ratio.

The effect of cellulose nanofibers (CNFs) on flow, hydration, morphology, and strength of oil well cement (OWC) was investigated using a range of spectroscopic methods coupled with rheological modeling and strength analysis. The Vom-Berg model showed the best fitting result of the rheology data. The addition of …

The Effects Of Isoprene And Nox On Secondary Organic Aerosols Formed Through Reversible And Irreversible Uptake To Aerosol Water, Marwa M. El-Sayed, Diana L. Ortiz-Montalvo, Christopher J. Hennigan

Publications

Isoprene oxidation produces water-soluble organic gases capable of partitioning to aerosol liquid water. The formation of secondary organic aerosols through such aqueous pathways (aqSOA) can take place either reversibly or irreversibly; however, the split between these fractions in the atmosphere is highly uncertain. The aim of this study was to characterize the reversibility of aqSOA formed from isoprene at a location in the eastern United States under substantial influence from both anthropogenic and biogenic emissions. The reversible and irreversible uptake of water-soluble organic gases to aerosol water was characterized in Baltimore, Maryland, USA, using measurements of particulate water-soluble organic carbon …

Electric Power Systems Successfully Tests Batteries With Nasa At Usu Blast Lab | Utah State University Power Electronics Lab, Usu College Of Engineering

College of Engineering News

The Utah Power Electronics Lab (UPEL) is pleased to announce the completion of a successful battery test with Electric Power Systems (EP Systems) and NASA.

Natural Sensations Evoked In Distal Extremities Using Surface Electrical Stimulation, Julia P. Slopsema, John M. Boss, Lane A. Heyboer, Carson M. Tobias, Brooke P. Draggoo, Kathleen E. Finn, Payton J. Hoff, Katharine H. Polasek

Faculty Publications

Background: Electrical stimulation is increasingly relevant in a variety of medical treatments. In this study, surface electrical stimulation was evaluated as a method to non-invasively target a neural function, specifically natural sensation in the distal limbs.

Method: Electrodes were placed over the median and ulnar nerves at the elbow and the common peroneal and lateral sural cutaneous nerves at the knee. Strength-duration curves for sensation were compared between nerves. The location, modality, and intensity of each sensation were also analyzed. In an effort to evoke natural sensations, several patterned waveforms were evaluated.

Results: Distal sensation was obtained in all but …

A Simple Mathematical Model For The Nonlinear Compliance Of Arteries, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

No abstract provided.

Electrospun Fibers As A Dressing Material For Drug And Biological Agent Delivery In Wound Healing Applications, Mulugeta Gizaw, Jeffrey Thompson, Addison Faglie, Shih-Yu L Lee, Pierre Neunenschwander, Shih-Feng Chou

Mechanical Engineering Faculty Publications and Presentations

Wound healing is a complex tissue regeneration process that promotes the growth of new tissue to provide the body with the necessary barrier from the outside environment. In the class of non-healing wounds, diabetic wounds, and ulcers, dressing materials that are available clinically (e.g., gels and creams) have demonstrated only a slow improvement with current available technologies. Among all available current technologies, electrospun fibers exhibit several characteristics that may provide novel replacement dressing materials for the above-mentioned wounds. Therefore, in this review, we focus on recent achievements in electrospun drug-eluting fibers for wound healing applications. In particular, we review drug …

Identification Of Unique Features And Exploration Of Leap Motion Controller For Detecting Hand Hygiene Stages, Rashmi Bakshi, Jane Courtney, Damon Berry, Graham Gavin

Conference Papers

Hospital acquired infections (HAIs) are contracted by the patients during the hospital stay. Antibiotic resistant microbes are the major cause and spread due to the contaminated medical equipment, crowded hospitals, frequent transfer of patients from one unit to another and poor hand hygiene. [1] In high income countries, approximately 30% of patients in intensive care units are affected by at least one HAI. [2] Hand hygiene is identified as a measure to prevent cross-transmission and to reduce the rate of HAI. [3] Technology is now used as a means of assessing hand hygiene compliance. Current approaches involve the use of …

Design Improvements And Construction Of An Electric Fish Finder, Jeffrey C. Lambert

The Pegasus Review: UCF Undergraduate Research Journal

We provide notes on the design and construction of an 'Electric Fish Finder – a self contained, portable bioamplifier for the detection and monitoring of the electric organ discharges generated by electric fish. Here we describe several improvements on a previous design, including: improved performance in waters of extremely low conductivity, extended battery life, and better waterproofing.

Usu Professor And Alum Patent New Heart Rate Estimation Technology | College Of Engineering, Usu College Of Engineering

College of Engineering News

Researchers at Utah State University don’t need an Apple Watch or stethoscope to measure your heartbeat. They only need a video camera.

Effects Of Short-Term Aging On Asphalt Binders And Hot Mix Asphalt At Elevated Temperatures And Extended Aging Time, Rubben Lolly, Waleed Zeiada, Mena Souliman, Kamil Kaloush

Civil Engineering Faculty Publications and Presentations

The production process of Hot Mix Asphalt (HMA) causes a short term aging (STA) to asphalt binder due to the heating of both asphalt binder and aggregates before mixing together. Laboratory protocols are followed to simulate the STA conditions for both asphalt binders and asphalt mixtures. STA protocols expose asphalt binders or asphalt mixtures to specific aging temperature for a specific period of time to produce stiffening that is similar to that of actual production conditions. Successful construction of HMA in cold season/regions may require elevating the production temperature of HAM to achieve proper compaction of HMA layers. Producing HMA …

Optimal Wavelength Selection For Optical Spectroscopy Of Hemoglobin And Water Within A Simulated Light-Scattering Tissue, Mikael Marois, Stephen L. Jacques, Keith D. Paulsen

Dartmouth Scholarship

An algorithm that selects optimal wavelengths for spectral fitting of diffuse light reflectance spectra using a nonnegative least squares method is presented. Oxyhemoglobin, deoxyhemoglobin, and water are considered representative absorbers, but the approach is not constrained or limited by absorber selection provided native basis spectra are available. The method removes wavelengths iteratively from a scattering-modulated absorption matrix by maximizing the product of its singular values and offers considerable improvements over previously published wavelength selection schemes. Resulting wavelength selections are valid for a broad range of optical properties and yield lower RMS errors than other wavelength combinations. The method is easily …

The Santa Clara, 2018-01-25, Santa Clara University

The Santa Clara

No abstract provided.

Usu Researcher Develops Technology For Dream Chaser® Spacecraft | College Of Engineering, Usu College Of Engineering

College of Engineering News

A Utah State University researcher was among those celebrating a recent successful test flight of the Dream Chaser spacecraft.

Investigation Of Morphological Changes In Small Coastal Rivers During Flood, Tanzina Afrin

LSU Master's Theses

The delivery of fluvial sediment to coastal margins is one of the major concerns for river and coastal morphodynamics. Relevant research has primarily focused on large rivers that transport substantial sediment load and thus are responsible for building deltaic landscapes. However, less research is concentrated on small coastal rivers. A need exists to better understand the sediment dynamics in small coastal rivers that have different backwater regimes than their larger counterparts. The main objective of this research was to examine the influence of backwater on the morphodynamics of a small coastal meandering river during a large flood event. The investigation …

Carbon Nanofibers (Cnfs) Supported Cobalt-Nickel Sulfide (Coni 2 S 4) Nanoparticles Hybrid Anode For High Performance Lithium Ion Capacitor, Ajay Jagadale, Xuan Joe Zhou, Douglas Blaisdell, Sen Yang

Electrical & Computer Engineering Publications

Lithium ion capacitors possess an ability to bridge the gap between lithium ion battery and supercapacitor. The main concern of fabricating lithium ion capacitors is poor rate capability and cyclic stability of the anode material which uses sluggish faradaic reactions to store an electric charge. Herein, we have fabricated high performance hybrid anode material based on carbon nanofibers (CNFs) and cobalt-nickel sulfide (CoNi2S4) nanoparticles via simple electrospinning and electrodeposition methods. Porous and high conducting CNF@CoNi2S4 electrode acts as an expressway network for electronic and ionic diffusion during charging-discharging processes. The effect of anode to cathode mass ratio on the performance …

Global Anthropogenic Phosphorus Loads To Freshwater And Associated Grey Water Footprints And Water Pollution Levels: A High-Resolution Global Study, Mesfin Mekonnen, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

We estimate the global anthropogenic phosphorus (P) loads to freshwater and the associated grey water footprints (GWFs) for the period 2002–2010, at a spatial resolution of 5 3 5 arc min, and com- pare the GWF per river basin to runoff to assess the P-related water pollution level (WPL). The global anthro- pogenic P load to freshwater systems from both diffuse and point sources is estimated at 1.5 Tg/yr. More than half of this total load was in Asia, followed by Europe (19%) and Latin America and the Caribbean (13%). The domestic sector contributed 54% to the total, agriculture 38%, …

Usu Engineering Faculty Named Educator Of The Year | College Of Engineering, Usu College Of Engineering

College of Engineering News

Marc Maguire, assistant professor of civil and environmental engineering at Utah State University, was named Educator of the Year by the Precast/Prestressed Concrete Institute.

Superimposed Signaling Inspired Channel Estimation In Full-Duplex Systems, Abbas Koohian, Hani Mehrpouyan, Ali A. Nasir, Salman Durrani, Steven D. Blostein

Electrical and Computer Engineering Faculty Publications and Presentations

Residual self-interference (SI) cancellation in the digital baseband is an important problem in full-duplex (FD) communication systems. In this paper, we propose a new technique for estimating the SI and communication channels in a FD communication system, which is inspired from superimposed signaling. In our proposed technique, we add a constant real number to each constellation point of a conventional modulation constellation to yield asymmetric shifted modulation constellations with respect to the origin. We show mathematically that such constellations can be used for bandwidth efficient channel estimation without ambiguity. We propose an expectation maximization (EM) estimator for use with the …

Employing A User-Centered Design Process For Cybersecurity Awareness In The Power Grid, Jean C. Scholtz, Lyndsey Franklin, Aditya Ashok, Katya Leblanc, Christopher Bonebrake, Eric Andersen, Michael Cassiadoro

Journal of Human Performance in Extreme Environments

In this paper, we discuss the process we are using in the design and implementation of a tool to improve the situation awareness of cyberattacks in the power grid. We provide details of the steps we have taken to date and describe the steps that still need to be accomplished. The focus of this work is to provide situation awareness of the power grid to staff from different, non-overlapping roles in an electrical transmission organization in order to facilitate an understanding of a possible occurrence of a cyberattack. Our approach follows a user-centered design process and includes determining the types …

Deep Gaze Velocity Analysis During Mammographic Reading For Biometric Identification Of Radiologists, Hong-Jun Yoon, Folami Alamudun, Kathy Hudson, Garnetta Morin-Ducote, Georgia Tourassi

Journal of Human Performance in Extreme Environments

Several studies have confirmed that the gaze velocity of the human eye can be utilized as a behavioral biometric or personalized biomarker. In this study, we leverage the local feature representation capacity of convolutional neural networks (CNNs) for eye gaze velocity analysis as the basis for biometric identification of radiologists performing breast cancer screening. Using gaze data collected from 10 radiologists reading 100 mammograms of various diagnoses, we compared the performance of a CNN-based classification algorithm with two deep learning classifiers, deep neural network and deep belief network, and a previously presented hidden Markov model classifier. The study showed that …

Analytical Approaches To Improve Accuracy In Solving The Protein Topology Problem, Kamal Al Nasr, Feras Yousef, Ruba Jebril, Christopher Jones

Computer Science Faculty Research

To take advantage of recent advances in genomics and proteomics it is critical that the three-dimensional physical structure of biological macromolecules be determined. Cryo-Electron Microscopy (cryo-EM) is a promising and improving method for obtaining this data, however resolution is often not sufficient to directly determine the atomic scale structure. Despite this, information for secondary structure locations is detectable. De novo modeling is a computational approach to modeling these macromolecular structures based on cryo-EM derived data. During de novo modeling a mapping between detected secondary structures and the underlying amino acid sequence must be identified. DP-TOSS (Dynamic Programming for determining the …

Microfluidic Device And Method Using Double Anodic Bonding, Stephen Forrest, Gregory Mcgraw, Siddharth Harikrishna Mohan, Diane Peters

Mechanical Engineering Patents

A microfluidic device for use with a microfluidic delivery system, such as an organic vapor jet printing device, includes a glass layer that is directly bonded to a microfabricated die and a metal plate via a double anodic bond. The double anodic bond is formed by forming a first anodic bond at an interface of the microfabricated die and the glass layer, and forming a second anodic bond at an interface of the metal plate and the glass layer, where the second anodic bond is formed using a voltage that is lower than the voltage used to form the first …

Universality Of Fast Quenches From The Conformal Perturbation Theory, Anatoly Dymarsky, Michael Smolkin

Physics and Astronomy Faculty Publications

We consider global quantum quenches, a protocol when a continuous field theoretic system in the ground state is driven by a homogeneous time-dependent external interaction. When the typical inverse time scale of the interaction is much larger than all relevant scales except for the UV-cutoff the system’s response exhibits universal scaling behavior. We provide both qualitative and quantitative explanations of this universality and argue that physics of the response during and shortly after the quench is governed by the conformal perturbation theory around the UV fixed point. We proceed to calculate the response of one and two-point correlation functions confirming …