Engineering Commons^™

Rail Transportation Of Aggregate Material, Mario Ghilott

Construction Management

Sand, gravel and crushed stone, known as construction aggregates, are the main ingredient in materials to maintaining and building new infrastructure. Construction aggregate has a low cost per ton, but because mass quantities are typically required, if a local source is not available then the cost of transportation quickly exceed the value of the material. The North Bay Area has an estimated 50-year demand of 521 Million Tons (MT) and a current permitted supply of 110 MT. This North Bay Area region has a supply to demand ratio of 21% and is estimated to last 11-20 years (from 2012). This …

Evaluating The Practices Of A Small Business: A Case Study, Madeleine Anne Bernadicou

Construction Management

Companies are in constant search to increase profits. The company success is dependent on its standard operational procedures, otherwise known as SOP. Golden State Irrigation and Noack Pump is a non-union merit shop contractor that performs irrigation work in the California’s central valley. This paper researches the utilized methods of the company to see if it is operating at an optimal level. The methodology used in this project is a case study, where multiple jobs, income statements, and cash flows were analyzed, along with conducted interviews. Both qualitative and quantitative data were collected in the investigation of this case study. …

Worker Activity Recognition In Smart Manufacturing Using Imu And Semg Signals With Convolutional Neural Networks, Wenjin Tao, Ze-Hao Lai, Ming-Chuan Leu, Zhaozheng Yin

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In a smart manufacturing system involving workers, recognition of the worker's activity can be used for quantification and evaluation of the worker's performance, as well as to provide onsite instructions with augmented reality. In this paper, we propose a method for activity recognition using Inertial Measurement Unit (IMU) and surface electromyography (sEMG) signals obtained from a Myo armband. The raw 10-channel IMU signals are stacked to form a signal image. This image is transformed into an activity image by applying Discrete Fourier Transformation (DFT) and then fed into a Convolutional Neural Network (CNN) for feature extraction, resulting in a high-level …

Modeling The Spatially Varying Point Spread Function Of The Kirkpatrick-Baez Optic, Nathan Adelman

Master's Theses

Lawrence Livermore National Laboratory's (LLNL) National Ignition Facility (NIF) uses a variety of diagnostics and image capturing optics for collecting data in High Energy Density Physics (HEDP) experiments. However, every image capturing system causes blurring and degradation of the images captured. This degradation can be mathematically described through a camera system's Point Spread Function (PSF), and can be reversed if the system's PSF is known. This is deconvolution, also called image restoration. Many PSFs can be determined experimentally by imaging a point source, which is a light emitting object that appears infinitesimally small to the camera. However, NIF's Kirkpatrick-Baez Optic …

Urinalysis Screening For Rural Communities, Dana Bren-Cardali, Lilian Dao, Jeffrey Destruel, Ryan Fernandez

Interdisciplinary Design Senior Theses

Access to medical care and health screenings is a necessity for patients around the globe, but it can be difficult to provide this without screenings becoming costly or convoluted. In rural and underdeveloped areas, patients are often disadvantaged when it comes to finding reliable and affordable healthcare. The isolation provided by their location and the rising costs of physicians makes it impossible for most impoverished communities to attain personalized care. Because of this, treatable diseases often go unaddressed, allowing diseases to progress to a critical condition. Mortality rates have shown to be higher in communities located in rural areas and …

Characterization Of Arterial Flow For Junctional Bleeding Control, Nick Bosio

Master's Theses

This study investigated reducing volumetric flowrate under steady flow conditions by varying lengths of compression with constant cross-sectional area and varying cross-sectional area reduction with constant length in order to better understand how to control junctional hemorrhaging. The hypotheses of this study were that length reduction will have little effect on volumetric flowrate and that cross-sectional area reduction would need to be approximately 80 percent in order to obtain bleeding control. The study found that length reduction has little effect on changing the flowrate. However, in order to obtain at least 80 percent reduction in flow, the area needs to …

The Vessel For Autonomous Research Underwater (The Varuna), Tyler Briles, Shae Connor, Erin Guthrie, Anthony Jackson, Madeleine Peauroi

Interdisciplinary Design Senior Theses

Humans are intimately connected to the Earth’s ocean, and yet only 5% of it has been explored. Learning more about marine life and ocean chemistry can only improve our stewardship efforts. The addition of an Autonomous Underwater Vehicle to the Santa Clara University Robotic Systems Laboratory’s collection of marine robots will contribute to this quest for knowledge. It will assist researchers by providing a low-cost, easy-to-use, portable, reliable, and safe alternative to operator-controlled vehicles. This report describes our motivations for this project, the decisions we made in the design and manufacturing of the VARUNA, and tradeoff analyses of possible options. …

The Human Keyboard, Derek Char, Thomas Chung, Alexander Mckee, Allen Pai

Interdisciplinary Design Senior Theses

Most products that implement features for user interactions utilize buttons or switches for the user to command to select actions to perform. Such designs are typically controlled with direct motions, such as touch or voice and are seldom designed in consideration of those unable to utilize direct control. In this project, we designed technology that reads naturally occuring biosignals from the body, which then can be apply those signals with any interface. For our specific application in this project, we decided to implement a keyboard. Instead of teaching the fingers how to type on a mechanical keyboard, the body can …

Bounded Rank Optimization For Effective And Efficient Emergency Response, Pallavi Madhusudan Manohar, Pradeep Varakantham, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Effective placement of emergency response vehicles (such as ambulances, fire trucks, police cars) to deal with medical, fire or criminal activities can reduce the incident response time by few seconds, which in turn can potentially save a human life. Owing to its adoption in Emergency Medical Services (EMSs) worldwide, existing research on improving emergency response has focused on optimizing the objective of bounded time (i.e. number of incidents served in a fixed time). Due to the dependence of this objective on temporal uncertainty, optimizing the bounded time objective is challenging. In this paper, we propose a new objective referred to …

Neural Network On Virtualization System, As A Way To Manage Failure Events Occurrence On Cloud Computing, Khoi Minh Pham

Electronic Theses, Projects, and Dissertations

Cloud computing is one important direction of current advanced technology trends, which is dominating the industry in many aspects. These days Cloud computing has become an intense battlefield of many big technology companies, whoever can win this war can have a very high potential to rule the next generation of technologies. From a technical point of view, Cloud computing is classified into three different categories, each can provide different crucial services to users: Infrastructure (Hardware) as a Service (IaaS), Software as a Service (SaaS), and Platform as a Service (PaaS). Normally, the standard measurements for cloud computing reliability level is …

Inter Process Communication Between Two Servers Using Mpich, Nagabhavana Narla

Electronic Theses, Projects, and Dissertations

The main aim of the project is to launch multiple processes and have those processes communicate with each other using peer to peer communication to eliminate the problems of multiple processes running on a single server, and multiple processes running on inhomogeneous servers as well as the problems of scalability. This entire process is done using MPICH which is a high performance and portable implementation of Message Passing Interface standard.

The project involves setting up the passwordless authentication between two local servers with the help of SSH connection. By establishing a peer to peer communication and by using a unique …

Epicconfigurator Computer Configurator And Cms Platform, Ivo A. Tantamango

Electronic Theses, Projects, and Dissertations

Very often when we are looking to buy new IT equipment in an online store, we face the problem that certain parts of our order are not compatible with others or sometimes one part needs additional components. From another point of view in this process, when an online store owner wants to manage the products available in stock, assign prices, set conditions to make an order, or manage customer information, he or she must often rely on information from different systems, physical files, or other sources.

EpicConfigurator simplifies and solves the issues mentioned above. EpicConfigurator makes it easy for User …

Book-Hunt! Android Mobile Application Using Indoor Positioning Technology, Sneha Pantam

Electronic Theses, Projects, and Dissertations

Indoor Positioning System (IPS) focuses on locating objects inside

Buildings. Till date, GPS has helped us obtain accurate locations outdoors. These locations have helped us in many ways like navigating to a destination point, tracking people etc. Indoor Positioning System aims at navigating and tracking objects inside buildings. [1] IndoorAtlas is a technology that works on the theory of Indoor Positioning System. Book-Hunt is an Android mobile application which majorly makes use of IndoorAtlas therefore making use of the technique of indoor tracking. This Android mobile application is designed for Libraries. It is designed specifically for John M. Pfau Library, …

Leave The Features: Take The Cannoli, Jonathan Joseph Catanio

Master's Theses

Programming languages like Python, JavaScript, and Ruby are becoming increasingly popular due to their dynamic capabilities. These languages are often much easier to learn than other, statically type checked, languages such as C++ or Rust. Unfortunately, these dynamic languages come at the cost of losing compile-time optimizations. Python is arguably the most popular language for data scientists and researchers in the artificial intelligence and machine learning communities. As this research becomes increasingly popular, and the problems these researchers face become increasingly computationally expensive, questions are being raised about the performance of languages like Python. Language features found in Python, more …

Composite Bending-Dominated Hollow Nanolattices: A Stiff, Cyclable Mechanical Metamaterial, Biwei Deng, Rong Xu, Kejie Zhao, Yongfeng Lu, Sabyasachi Ganguli, Gary J. Cheng

Department of Electrical and Computer Engineering: Faculty Publications

Manufacturing ultralight and mechanical reliable materials has been a long-time challenge. Ceramicbased mechanical metamaterials provide significant opportunities to reverse their brittle nature and unstable mechanical properties and have great potential as strong, ultralight, and ultrastiff materials. However, the failure of ceramics nanolattice and degradation of strength/modulus with decreasing density are caused by buckling of the struts and failure of the nodes within the nanolattices, especially during cyclic loading. Here, we explore a new class of 3D ceramic-based metamaterials with a high strength–density ratio, stiffness, recoverability, cyclability, and optimal scaling factor. Deformation mode of the fabricated nanolattices has been engineered through …

Tradeoffs In Model Performance And Effort For Long-Term Phosphorus Leaching Based On In Situ Field Data, Ryan P. Freiberger, Derek M. Heeren, Dean E. Eisenhauer, Aaron R. Mittelstet, Guillermo Baigorria

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Phosphorus and N are critical nutrients for agriculture but are also responsible for surface water enrichment that leads to toxic algal growth. Although P loading to surface waters has traditionally been thought to occur primarily in surface runoff, contributions from subsurface transport can also be significant. The primary objectives of this research were to evaluate several methods of representing macropore flow and transport in a finite element model using plot-scale infiltration and leaching data and to compare several models of various levels of complexity to simulate long-term P leaching. To determine flow and transport parameters, single- and dual-porosity models in …

Portable Flux Tower Deployments Field Campaign Report, M. S. Torn, L Kuepper, S. C. Biraud, D. P. Billesbach

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Contents

Acronyms and Abbreviations...................................................................... iii

1.0 Summary ....................................................... 1

2.0 Results ........................................... 1

3.0 Publications and References ................................................. 2

4.0 Lessons Learned .................................................................... 2

3-D Reconstructions And Numerical Simulations Of Precarious Rocks In Southern California, Christine E. Wittich, Tara C. Hutchinson, J. Desanto, D. Sandwell

Department of Civil and Environmental Engineering: Faculty Publications

Reliable estimates of seismic hazard are essential for the development of resilient communities; however, estimates of rare, yet high intensity earthquakes are highly uncertain due to a lack of observations and recordings. Lacking this data, seismic hazard analyses may be based on extrapolations from earthquakes with more moderate return periods, which can lead to physically unrealistic earthquake scenarios. However, the existence of certain precariously balanced rocks (PBRs) has been identified as an indicator of an upper bound ground motion, which precludes toppling of the balanced rock, over its lifetime. To this end, a survey of PBRs was conducted in proximity …

Assessing The Accuracy Of Four Popular Face Recognition Tools For Inferring Gender, Age, And Race, Soon-Gyu Jung, Jisun An, Haewoon Kwak, Joni Salminen, Bernard J. Jansen

Research Collection School Of Computing and Information Systems

In this research, we evaluate four widely used face detection tools, which are Face++, IBM Bluemix Visual Recognition, AWS Rekognition, and Microsoft Azure Face API, using multiple datasets to determine their accuracy in inferring user attributes, including gender, race, and age. Results show that the tools are generally proficient at determining gender, with accuracy rates greater than 90%, except for IBM Bluemix. Concerning race, only one of the four tools provides this capability, Face++, with an accuracy rate of greater than 90%, although the evaluation was performed on a high-quality dataset. Inferring age appears to be a challenging problem, as …

Smart Espresso Machine, Hasham Ali, Justin L'Heureux, Hayden Yeung, Pei Hang Zhang

Electrical Engineering

With the recent “Internet of Things” trend, more and more home devices are connected to the Internet. Smart light bulbs, smart thermostats, smart door locks; just to name a few. These smart appliances enable users to view their status and control their settings remotely with just a few clicks on the smartphone. Moreover, the arrival of intelligent personal voice assistants such as Amazon Alexa revolutionized how users interact with these smart appliances. Nowadays, users are able to control these devices by just speaking.

If controlling smart devices is so easy, why not have your morning cup of joe be that …

Identifying Prevalent Mathematical Pathways To Engineering In South Carolina, Eliza Gallagher, Christy Brown, D. Andrew Brown, Kristin Kelly Frady, Patrick Bass, Michael A. Matthews, Thomas T. Peters, Robert J. Rabb, Ikhalfani Solan, Ronald W. Welch, Anand K. Gramopadhye

Faculty Publications

National data indicate that initial mathematics course placement in college is a strong predictor of persistence to degree in engineering, with students placed in calculus persisting at nearly twice the rate of those placed below calculus. Within the state of South Carolina, approximately 95% of engineering-intending students who initially place below calculus are from in-state. In order to make systemic change, we are first analyzing system-wide data to identify prevalent educational pathways within the state, and the mathematical milestones along those pathways taken by students in engineering and engineering-related fields. This paper reports preliminary analysis of that data to understand …

Introduction Of Mechatronics Specialization Through Concentration Areas In The Mechanical And Electrical Engineering Technology Programs, Otilia Popescu, Vukica M. Jovanovic, Sanjeevi Chitikeshi, Isaac L. Flory Iv

Engineering Technology Faculty Publications

The last few decades have experienced an explosion of technology, both in industry and in customer products. A large variety of embedded systems from various areas of applications, digital electronics, internet of things, automatically controlled products, and ultimately mechatronics systems are part of the everyday life. The changes in the industries, consumer markets and implicitly in the job markets, impose changes in the academic programs and curricula. Recently, mechatronics undergraduate programs started being developed in 2 or 4 years colleges across the nation, mainly driven by international companies operating in countries that already offer mechatronics degrees ranging from high school …

Advancing The Engineering Field: Opportunities To Support Transfer Students, Vukica M. Jovanovic, Narketta Sparkman-Key, Konstantin P. Cigularov, Daniela Cigularova, Bonita G. Anthony, Otilia Popescu

Engineering Technology Faculty Publications

Advancements in technology have made it vital that technicians advance their skills to stay current and competitive in the job market. Many technicians choose to transfer to baccalaureate programs in engineering and other STEM fields in order to advance their skills. As a result, engineering programs usually have a large population of transfer students. Many of transfer students are studying while employed in the field and some juggle a career and family while advancing their education. Accordingly, transfer students face various issues when transferring to different university settings. Some of these issues are related to embeddedness into the university community …

Lessons From Two Years Of Eportfolio Implementation In Engineering Technology Courses, Orlando M. Ayala, Otilia Popescu

Engineering Technology Faculty Publications

In an undergraduate as well as in a graduate academic setting, an ePortfolio is a collection of student work designed to exhibit student’s achievements, which often includes student’s reflective commentaries. While in academia ePortfolios are used to document the student learning process over time, they have been also well received by employers as work portfolios or showcases. This paper provides detailed explanations of two years of implementation of ePortfolio activities in junior and senior level engineering technology courses. The goal of the paper is to present to the community the best practices learned during the implementation and to provide information …

Photovoltaic System Optimization For An Austere Location Using Time Series Data, Torrey J. Wagner, Eric Lang, Warren Assink, Douglas S. Dudis

Faculty Publications

In this work we test experimental photovoltaic, storage and generator technologies and investigate their potential to meet austere location energy needs. After defining the energy requirements and insolation of a 1,100-person base, we develop a microgrid model and simulation. Cost optimizations were then performed using hourly time-series data to explore the cost and performance trade-space of a PV-battery-generator system. The work highlights the cost of resiliency and the dependencies of optimum system component sizes on duration and the fully burdened cost of fuel.

Orbital Constellation Design And Analysis Using Spherical Trigonometry And Genetic Algorithms: A Mission Level Design Tool For Single Point Coverage On Any Planet, Joseph R. Gagliano

Master's Theses

Recent interest surrounding large scale satellite constellations has increased analysis efforts to create the most efficient designs. Multiple studies have successfully optimized constellation patterns using equations of motion propagation methods and genetic algorithms to arrive at optimal solutions. However, these approaches are computationally expensive for large scale constellations, making them impractical for quick iterative design analysis. Therefore, a minimalist algorithm and efficient computational method could be used to improve solution times. This thesis will provide a tool for single target constellation optimization using spherical trigonometry propagation, and an evolutionary genetic algorithm based on a multi-objective optimization function. Each constellation will …

Metrology Computer Redesign, Natalie Lizama, Melinda Ong, Mitchell Aiken

Electrical Engineering

We are M[EE]² and our project is to redesign Micro-Vu’s metrology computer (the Q16) with modern components and updated firmware. Metrology machines take high precision and high accuracy measurements, and a computer attached to each machine reads out the measurements. We will be redesigning the logic and display circuit boards on the Q16. The ports and communication methods with the machine will stay the same as it must be a drop-in replacement.

The motivation behind the redesign stems from the age of the current design. The current design was created in 1986, and has not had significant modifications since. …

Portable High-Definition Audio Spectrum Analyzer, Alex Zahn, Jamie Corr

Electrical Engineering

The Portable High-definition Audio Spectrum Analyzer (PHASA) allows the user to visualize the audio frequency spectrum of an incoming line-level stereo audio signal. Upon pressing the touch screen spectrum graph, the PHASA displays the corresponding frequency and volume levels as well as crosshairs at the touched location. The PHASA features multiple left/right channel display modes— Left channel only, right channel only, both channels simultaneously, and the average between the two channels. The PHASA features multiple resolution display modes (standard-resolution and high-resolution) and multiple dynamics display modes (standard dynamics, averaging, and peak/hold). The PHASA accepts input audio via a 1/4" TRS …

Iridium Adc, Bill Blakely

Electrical Engineering

Today's modern digital audio systems are pushing performance boundaries. Most high quality audio digital to analog converters are capable of 24 bit, 96 kHz conversion. Professional audio interfaces frequently use 24 or 32 bit 192 kHz sample rates. These systems are able to achieve dynamic ranges greater than 100 dB, and distortion on the magnitude of single parts per million. This project proposes a high resolution analog digital converter (ADC) to measure and characterize these types of devices.

The proposed system will be capable of 24 bit conversion and an extended frequency range compared to the typical 20 Hz to …

Electric Upgrades - Supercapacitor Electric Bicycle, John Chen, Wilson Fletcher, Spencer Esparza

Electrical Engineering

Supercapacitors provide high current capabilities compared to conventional lithium-ion batteries, allowing for fast charging and discharging of electrical energy. This project seeks to test the benefits of supercapacitors in an electric bicycle unit in order to gain higher regenerative energy. The main components of the bicycle are its regenerative motor, supercapacitor array, and motor controller. Developing the project will provide data on the feasibility of using alternative battery storage and charging.