Engineering Commons^™

Pyrolysis Of Plastic Waste From Medical Services Facilities Into Potential Fuel And/Or Fuel Additives, Bright Kweku Ansah Baiden

Masters Theses

Limited space and high costs for landfilling as well as increasing regulations in plastic waste disposal, has led to high operating costs for organizations involved in managing plastic waste from medical facilities which led to the need to investigate an alternative option such as pyrolysis. The overall goal of this study was to evaluate pyrolysis as a means to repurpose plastic waste obtained from medical service facilities into fuel and fuel additive compounds, with two objectives involving, (1) to examine the effect of heat input (as voltage) and reaction/residence time; and (2) to evaluate the effect of the plastic waste …

Shipboard Design And Fabrication Of Custom 3d-Printed Soft Robotic Manipulators For The Investigation Of Delicate Deep-Sea Organisms, Daniel M. Vogt, Kaitlyn P. Becker, Brennan T. Phillips, Moritz A. Graule, Randi D. Rotjan, Timothy M. Shank, Erik E. Cordes, Robert J. Wood, David F. Gruber

Publications and Research

Soft robotics is an emerging technology that has shown considerable promise in deep-sea marine biological applications. It is particularly useful in facilitating delicate interactions with fragile marine organisms. This study describes the shipboard design, 3D printing and integration of custom soft robotic manipulators for investigating and interacting with deep-sea organisms. Soft robotics manipulators were tested down to 2224m via a Remotely-Operated Vehicle (ROV) in the Phoenix Islands Protected Area (PIPA) and facilitated the study of a diverse suite of soft-bodied and fragile marine life. Instantaneous feedback from the ROV pilots and biologists allowed for rapid re-design, such as adding ªfingernailsº, …

Untangling The Drivers Of Energy Reduction In The Uk Productive Sectors Efficiency Or Offshoring, Lukas Hardt, Anne Owen, Paul E. Brockway, Matthew K. Heun

University Faculty Publications and Creative Works

The UK has been one of the few countries that has successfully decoupled final energy consumption from economic growth over the past 15 years. This study investigates the drivers of final energy consumption in the UK productive sectors between 1997 and 2013 using a decomposition analysis that incorporates two novel features. Firstly, it investigates to what extent changes in thermodynamic efficiency have contributed to overall changes in sectoral energy intensities. Secondly, it analyses how much of the structural change in the UK economy is driven by the offshoring of energy-intensive production overseas. The results show that energy intensity reductions are …

Material-Process-Property Relationships Of 17-4 Stainless Steel Fabricated By Laser-Powder Bed Fusion Followed By Hot Isostatic Pressing., Harish Irrinki

Electronic Theses and Dissertations

17-4 PH stainless steel is commonly used in medical, tooling, automotive, chemical and aerospace industries due to its excellent strength and corrosion properties. Additive manufacturing processes such as laser-powder bed fusion (L-PBF) have gained attention and importance due to the potential to produce complex-shaped three-dimensional parts for various industries. In order to manufacture three-dimensional components from 17-4 PH stainless steel powder using L-PBF, it is critical for design and manufacturing engineers to have an awareness of various material options and corresponding processing and post-processing conditions to obtain useful mechanical properties from the process. The goal of this dissertation is to …

Microstructure And Mechanical Properties Of Selective Laser Melted Superalloy Inconel 625., Md Ashabul Anam

Electronic Theses and Dissertations

Selective Laser Melting (SLM), a powder based Additive Manufacturing (AM) process, has gained considerable attention in the aerospace, biomedical and automotive industries due to its many potential benefits, such as, capability of fabricating complex three-dimensional components, shortened design to product time, reduction in process steps, component mass reduction and material flexibility. This process uses metallic powder and is capable of fabricating complex structures with excellent microstructure which make SLM not only an improvement over other manufacturing processes but also innovative material processing technology. Inconel 625, a nickel-based super alloy is widely popular in aerospace, chemical and nuclear industries. This alloy …

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen

Electronic Theses and Dissertations

Much of what we know about fundamental physical law and the universe derives from observations and measurements using optical methods. The passive use of the electromagnetic spectrum can be the best way of studying physical phenomenon in general with minimal disturbance of the system in the process. While for many applications ambient visible light is sufficient, light outside of the visible range may convey more information. The signals of interest are also often a small fraction of the background, and their changes occur on time scales so quickly that they are visually imperceptible. This thesis reports techniques and technologies developed …

Evaluation Of Drug-Loaded Gold Nanoparticle Cytotoxicity As A Function Of Tumor Tissue Heterogeneity., Hunter Allan Miller

Electronic Theses and Dissertations

The inherent heterogeneity of tumor tissue presents a major challenge to nanoparticle-medicated drug delivery. This heterogeneity spans from the molecular to the cellular (cell types) and to the tissue (vasculature, extra-cellular matrix) scales. Here we employ computational modeling to evaluate therapeutic response as a function of vascular-induced tumor tissue heterogeneity. Using data with three-layered gold nanoparticles loaded with cisplatin, nanotherapy is simulated with different levels of tissue heterogeneity, and the treatment response is measured in terms of tumor regression. The results show that tumor vascular density non-trivially influences the nanoparticle uptake and washout, and the associated tissue response. The drug …

Solving School Bus Routing And Student Assignment Problems With Heuristic And Column Generation Approach., Di Zhang

Electronic Theses and Dissertations

In this dissertation, we solve a school bus routing problem of transporting students including special education (handicapped) students and assigning them in Oldham county education district. The main contribution of this research is that we consider special education students (Type-2) along with other students (Type-1) and design a comprehensive school bus schedule to transport both kinds of students at the same time. Also, a student assignment mathematical model is presented to optimize the number of bus stops in use as well as one important measure of service quality, the total student walking distance. Comparing to the classic clustering methods, heuristic …

Spam Elimination And Bias Correction : Ensuring Label Quality In Crowdsourced Tasks., Lingyu Lyu

Electronic Theses and Dissertations

Crowdsourcing is proposed as a powerful mechanism for accomplishing large scale tasks via anonymous workers online. It has been demonstrated as an effective and important approach for collecting labeled data in application domains which require human intelligence, such as image labeling, video annotation, natural language processing, etc. Despite the promises, one big challenge still exists in crowdsourcing systems: the difficulty of controlling the quality of crowds. The workers usually have diverse education levels, personal preferences, and motivations, leading to unknown work performance while completing a crowdsourced task. Among them, some are reliable, and some might provide noisy feedback. It is …

Binder Jetting Additive Manufacturing Process Fundamentals And The Resultant Influences On Part Quality., Hadi Miyanaji

Electronic Theses and Dissertations

Binder jetting additive manufacturing (BJ-AM) technology is a process by which a part is fabricated layer by layer through depositing liquid binder in the designated regions of each layer until the feature is complete. Due to the use of binder in geometry generation, this process possesses various advantages over the other additive manufacturing technologies including the ability to create colored objects via colored binders, lower cost, lack of heat-induced defects, and its potential capability to print a variety of materials such as metals, sands and ceramics. Although the application of the binder jetting process has been recently reported by different …

Editorial For The Special Issue On Micro/Nano-Chip Electrokinetics, Volume Ii, Xiangchun Xuan, Shizhi Qian

Mechanical & Aerospace Engineering Faculty Publications

There has been a rapidly increasing interest in the use of micro/nanofluidics to develop various point-of-care technologies for global health [1,2]. Electrokinetics is often the method of choice in these micro/nano-chips for an accurate transport and manipulation of fluids and samples [3,4]. This special issue in Micromachines is the continuation of our successful first volume on Micro/Nano-Chip Electrokinetics [5]. It consists of 22 contributions, which cover multiple aspects of electrokinetics related phenomena for various chemical and biological applications. We divide these papers into three primary categories and summarize them briefly below.

Incorporation Of Silica Nanoparticles Into The Underlayer Of Pda/Ptfe Thin Coatings, Adedoyin Abe

Mechanical Engineering Undergraduate Honors Theses

Polytetrafluoroethylene (PTFE) is one of the most low friction and corrosion resistant solid lubricants. Prior studies have shown that a polydopamine (PDA) underlayer enhances the durability of PTFE thin coating. In this study, 100, 200, and 300 µL of aqueous silica nanoparticle (NP) solutions were added to the PDA deposition solution. The durability and coefficient of friction of PDA/PTFE thin coatings on stainless steel substrates are investigated with and without incorporating the silica NPs. The coatings were tested in dry contact conditions using a Universal Mechanical Tester (UMT) with a ball-on-flat configuration in a reciprocating motion. It was found that …

Mitigating The Risk: An Analysis Of Wildlife-Strike Data From São Paulo International Airport (Sbgr) [2011-2017], Flavio A. C. Mendonca Ph.D., Julius C. Keller Ph.D.

Publications

São Paulo (Guarulhos) International Airport;

• Busiest airport in South America;
• Major hub in Latin America;
• Commercial Operations - 93%;
• International Commercial Operations - 27.1%;
• Major routes – Argentina, Chile, and U.S;
• LATAM, GOL, Azul, American Airlines, Copa, Aerolineas Argentinas, TAP, United Airlines – Most International Flights.

2018 Bird Strike Committee Usa Meeting, Flavio A. C. Mendonca Ph.D., Carlos F.G. Schönhardt

Publications

Offshore Aviation in Brazil Since1980

Air passenger and cargo transport to offshore platforms began in the 1980s. The largest customer in Brazil is PETROBRAS, which ranked fifth in 2011 among the largest publicly traded oil companies in the world.

• Air passenger and Cargo Transport
• Medical Evacuation
• Helicopter Maintenance
• Helicopter Transport of External Cargo.

Dynamic Cone Penetration Tests For Liquefaction Evaluation Of Gravelly Soils, Michael H. Talbot

Theses and Dissertations

Dynamic Cone Penetration Tests for LiquefactionEvaluation of Gravelly SoilsMichael H. TalbotDepartment of Civil and Environmental Engineering, BYUDoctor of PhilosophyIn North American practice, the Becker Penetration Test (BPT) has become the primary field test used to measure penetration resistance of gravelly soils. However, this test is expensive and uncertainties exist regarding correlations and corrections for rod friction. As an alternative, the dynamic penetration test (DPT) developed in China has recently been correlated with liquefaction resistance in gravelly soils. The DPT equipment consists of a 74 mm diameter cone tip driven by a 120 kg hammer with a free fall height of …

Effect Of Differences In The Primary Structure Of The A-Chain On The Aggregation Of Insulin Fragments, Paul P. Nakka, Ke Li, Daniel Forciniti

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bovine and human insulin have similar primary structures. In this article, the region of the insulin A-chain of bovine and human insulin where the amino acid composition is different was studied. Bovine insulin fragment (BIF) and human insulin fragment (HIF) were synthesized in solid-phase peptide synthesis. The effects of pH, temperature, urea, ionic strength, and stirring on the formation of fibrils were studied using a fractional factorial resolution III experimental design. Fibrillation was monitored by fluorescence and infrared spectroscopy and optical microscopy. Both fragments formed fibrils at pH 1.6 and a temperature of 60 °C. The lag time and apparent …

Application Of Fractal Dimension For Quantifying Noise Texture In Computed Tomography Images, P. Khobragade, Jiahua Fan, Franco Rupcich, Dominic J. Crotty, Taly Gilat Schmidt

Biomedical Engineering Faculty Research and Publications

Purpose

Evaluation of noise texture information in CT images is important for assessing image quality. Noise texture is often quantified by the noise power spectrum (NPS), which requires numerous image realizations to estimate. This study evaluated fractal dimension for quantifying noise texture as a scalar metric that can potentially be estimated using one image realization.

Methods

The American College of Radiology CT accreditation phantom (ACR) was scanned on a clinical scanner (Discovery CT750, GE Healthcare) at 120 kV and 25 and 90 mAs. Images were reconstructed using filtered back projection (FBP/ASIR 0%) with varying reconstruction kernels: Soft, Standard, Detail, Chest, …

Command Governor-Based Adaptive Control For Dynamical Systems With Matched And Unmatched Uncertainties, Metehan Yayla, Ehsan Arabi, Ali Turker Kutay, Tansel Yucelen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, we propose a command governor-based adaptive control architecture for stabilizing uncertain dynamical systems with not only matched but also unmatched uncertainties and achieving the desired command following performance of a user-defined subset of the accessible states. In our proposed solution, online least-squares solutions for the matched and unmatched parameters are obtained through integration method and they are employed in the adaptive control framework. Specifically, the matched uncertainty is identified and its effect upon the system behavior is entirely attenuated. Moreover, using the unmatched uncertainty approximation obtained through radial basis function neural networks, the command governor signal is …

Using Finite Element Output To Detect Damage In A Steel Frame Model, Ai D. Nguyen

Electronic Theses and Dissertations

Many structural collapses, all over the world, are related to inspection errors. The U.S. I- 35 Bridge in Minneapolis and the Canterbury Television building in New Zealand are a few examples. U.S. infrastructure conditions are poor, scoring a D+ according to ASCE report 2017. When the structures are inspected, the cost is high and service is lost. Inspectors use their trained but subjective judgment, which can lead to errors. Improved inspection techniques are required to reduce the cost, time, and subjectivity.

SHETM (Structural Health EvaluationTM) is an in-house software that has the ability to employ data to improve damage detection …

A Framework For Assessing Sustainability Impacts Of Truck Routing Strategies, Haluk Laman

Electronic Theses and Dissertations

The impact of freight on our transportation system is further accentuated by the fact that trucks consume greater roadway capacity and therefore cause more significant problems including traffic congestion, delay, crashes, air pollution, fuel consumption, and pavement damage. Assessing the actual effects of truck traffic is a growing need to support the ability to safely and efficiently move goods and people in areas where roadway expansion is not the best option. On one hand, trucks need to efficiently serve commerce and industry, while at the same time their activities need not contribute to a decline in the quality or public …

Nanofiltration Of Perfluorinated Compounds As A Function Of Water Matrix Properties, Hadi Toure

Electronic Theses and Dissertations

Perfluorinated compounds (PFCs) have been manufactured and used in various industries including food packaging, paintings, and coating industries. Perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) are the most commonly investigated PFCs that have bioaccumulative properties and a strong persistence in environment. Despite the growing interest in using membrane technology to remove PFOA and PFOS from water, little information is available on the impact of natural water matrices on the removal of PFOA and PFOS when using nanofiltration (NF). The presence of natural organic matter (NOM) and cations (Ca2+ and Mg2+) in water matrices and their interactions with the PFCs …

Rotary Pump Speed Modulation To Produce Pulsatile Flow And Ventricular Volume Unloading., Connor Joseph Smith

Electronic Theses and Dissertations

Background: Continuous-flow (CF) left ventricular assist devices (LVADs) have gained widespread clinical acceptance as a treatment option for advanced heart failure (HF); however, they have also been associated with an increased risk of adverse events, including gastrointestinal bleeding, aortic insufficiency, and hemorrhagic stroke. It has been hypothesized that the increase in adverse event incidence may be due in part to diminished vascular pulsatility and high shear stress when CF-LVADs are operated at fixed speeds. Previous studies have shown that pump speed modulation generates greater levels of pulsatility in rotary pumps than when operated at fixed speeds. The objective of this …

Uncoupling Fermentative Synthesis Of Molecular Hydrogen From Biomass Formation In Thermotoga Maritima, Raghuveer Singh, Derrick White, Yaşar Demirel, Robert Kelley, Kenneth Noll, Paul H. Blum

Department of Chemical and Biomolecular Engineering: Faculty Publications

When carbohydrates are fermented by the hyperthermophilic anaerobe Thermotoga maritima, molecular hydrogen (H₂) is formed in strict proportion to substrate availability. Excretion of the organic acids acetate and lactate provide an additional sink for removal of excess reductant. However, mechanisms controlling energy management of these metabolic pathways are largely unexplored. To investigate this topic, transient gene inactivation was used to block lactate production as a strategy to produce spontaneous mutant cell lines that overproduced H₂ through mutation of unpredicted genetic targets. Single-crossover homologous chromosomal recombination was used to disrupt lactate dehydrogenase (encoded by ldh) with …

A Method For Characterization Of Single-Event Latchup Technologies As A Function Of Geometric Variation, Matt Joplin

Masters Theses and Doctoral Dissertations

Complementary metal-oxide-semiconductor (CMOS) technology is the dominant integrated circuit (IC) technology in modern electronics systems. As CMOS comprises of p-channel and n-channel transistors, there are parasitic PNPN paths that act as cross-coupled bipolar transistors capable of creating low-impedance paths between the power supply rails known as the “latchup” state. Latchup is destructive and requires a power cycle to restore operation. Latchup can be stimulated by ionizing radiation such as a high-energy proton or heavy-ions from deep space, resulting in a significant vulnerability in CMOS space systems. The sensitivity of an IC to single-event latchup (SEL) depends on various process parameters …

Gold Nanoparticles For Stem Cell Delivery In Myocardial Infarction: Analysis Of Toxicity And Development Of A Cell Culture Platform For Use In An In-Vitro Model Of Mi-Associated Ischemia/Reperfusion, Jeffrey Curran Henson

Graduate Theses and Dissertations

In this work, the potential for PEGylated gold nanoparticles for use as a platform for stem cell delivery in treatment of myocardial infarction (MI) is preliminarily investigated. Cardiovascular disease is currently the leading cause of death worldwide, with majority of mortality resulting from coronary artery disease and associated MI. The ensuing ischemic conditions resulting from MI cause substantial heart muscle tissue loss and scarring in the heart. Adverse tissue remodeling creates a significant loss in heart function that can result in the formation of cardiac hypertrophy, ventricular dilation and arrythmias. The long-term prognosis of patients who have suffered MI is …

Modeling And Validations Of Control Parameters For Material Extrusion-Based Additive Manufacturing Of Thixotropic Aluminum Alloys., Lars Herhold

Electronic Theses and Dissertations

Additive Manufacturing (AM) with metals has been accomplished mainly through powder bed fusion processes. Initial experiments and simulations using Material Extrusion Additive Manufacturing (MEAM) have been performed by various researchers especially using low melting alloys. Recently Stratasys Inc. submitted a patent application for the use of their Material Extrusion technology also called Fused Deposition Modeling (FDM) where they describe the process using thixotropic semi-solid alloys. Currently this process using semi-solid, engineering type alloys such as A356 or THIXALLOY 540 aluminum have not been researched to evaluate the control parameters. This research combines the in-depth knowledge of applying thixotropic semi-solid aluminum …

Particle Slip Velocity Influences Inertial Focusing Of Particles In Curved Microchannels, Saurabh Deshpande, Phanindra Tallapragada

Publications

Size based separation and identification of particles in microfluidics through purely hydrodynamic means has gained significant interest due to a number of possible biomedical applications. Curved micro-channels, particularly spiral micro-channels with rectangular cross-section and the dynamics of particles in such channels have been extensively researched to achieve size based separation of particles. In this paper we present evidence that sheds new light on the dynamics of particles in such curved channels; that a unique particle slip velocity is associated with the focusing positions in the cross sections, which leads to a balance of forces. Our experiments therefore imply that the …

Code Smells For Model-View-Controller Architectures, Maurício Aniche, Gabriele Bavota, Christoph Treude, Marco Aurélio Gerosa, Arie Van Deursen

Research Collection School Of Computing and Information Systems

Previous studies have shown the negative effects that low-quality code can have on maintainability proxies, such as code change- and defect-proneness. One of the symptoms of low-quality code are code smells, defined as sub-optimal implementation choices. While this definition is quite general and seems to suggest a wide spectrum of smells that can affect software systems, the research literature mostly focuses on the set of smells defined in the catalog by Fowler and Beck, reporting design issues that can potentially affect any kind of system, regardless of their architecture (e.g., Complex Class). However, systems adopting a specific architecture (e.g., the …

Customer Segmentation Using Online Platforms: Isolating Behavioral And Demographic Segments For Persona Creation Via Aggregated User Data, Jisun An, Haewoon Kwak, Soon‑Gyo Jung, Joni Salminen, Bernard J. Jansen

Research Collection School Of Computing and Information Systems

We propose a novel approach for isolating customer segments using online customer data for products that are distributed via online social media platforms. We use non-negative matrix factorization to first identify behavioral customer segments and then to identify demographic customer segments. We employ a methodology for linking the two segments to present integrated and holistic customer segments, also known as personas. Behavioral segments are generated from customer interactions with online content. Demographic segments are generated using the gender, age, and location of these customers. In addition to evaluating our approach, we demonstrate its practicality via a system leveraging these customer …

A Comparative Study Of Contact Stress From Different Standards For Some Theoretical Straight Bevel Gear Pairs, Edward E. Osakue, Lucky Anetor

Faculty Publications

ANSI/AGMA 2003-B97, ISO 10300 standards and a new contact stress model are used to estimate and compare contact stresses in some theoretical straight bevel gear pairs. The contact stress expressions in the different gear standards and new model are formatted to highlight the similarity and differences. The power range of 10 to 15,000 kW, backend modules of 2.5 to 25 mm and backend pitch velocities of 4.58 to 25.37 m/s are covered. The results indicate that the percentage differences between the new contact stress and AGMA models are in the range of 2.22% to 7.40%. These differences are small but …