Engineering Commons^™

Mechanisms Of Impaired Motor Unit Firing Behavior In The Vastus Lateralis Muscle After Stroke, Spencer Murphy

Dissertations (1934 -)

The purpose of this dissertation research project was to examine the role of impaired motor unit firing behavior on force generation after a stroke. We studied the relationship between intrinsic motoneuron properties and inhibitory sensory pathways to deficient motoneuron activity in the vastus lateralis muscle after a stroke. Individuals with stroke often have deficits with force generation and volitional relaxation. Current models of impaired force output after a stroke focus primarily on the pathology within the corticospinal pathway because of decreased descending drive. Though this is an important aspect of deficient motoneuron output, it is incomplete because motoneurons receive other …

Dynamic Lifetime Reliability And Energy Management For Network-On-Chip Based Chip Multiprocessors, Milad Ghorbani Moghaddam

Dissertations (1934 -)

In this dissertation, we study dynamic reliability management (DRM) and dynamic energy management (DEM) techniques for network-on-chip (NoC) based chip multiprocessors (CMPs). In the first part, the proposed DRM algorithm takes both the computational and the communication components of the CMP into consideration and combines thread migration and dynamic voltage and frequency scaling (DVFS) as the two primary techniques to change the CMP operation. The goal is to increase the lifetime reliability of the overall system to the desired target with minimal performance degradation. The simulation results on a variety of benchmarks on 16 and 64 core NoC based CMP …

Hypothesis Paper: Mechanism For Primary Blast Induced Traumatic Brain Injury With Minimal Head Motion, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

Transit of the human skull by blast waves produces diffuse brain injury. The exact mechanisms are unknown. This paper describes plausible mechanisms in which steep intracranial pressure gradients, demonstrated in prior computational models of blast-skull interaction, produce subsequent deformation and motion of the whole brain within the skull, without obvious movement of the head. Equations of motion are derived to describe the acceleration, velocity, and relative position of both the skull and the brain in response to known extracranial and intracranial pressures both during and several hundred milliseconds after blast wave passage. A finite element model is solved to visualize …

Indutivo: Contact-Based, Object-Driven Interactions With Inductive Sensing, Jun Gong, Xin Yang, Teddy Seyed, Josh Urban Davis, Xing-Dong Yang

Dartmouth Scholarship

We present Indutivo, a contact-based inductive sensing technique for contextual interactions. Our technique recognizes conductive objects (metallic primarily) that are commonly found in households and daily environments, as well as their individual movements when placed against the sensor. These movements include sliding, hinging, and rotation. We describe our sensing principle and how we designed the size, shape, and layout of our sensor coils to optimize sensitivity, sensing range, recognition and tracking accuracy. Through several studies, we also demonstrated the performance of our proposed sensing technique in environments with varying levels of noise and interference conditions. We conclude by presenting demo …

Battery-Free Eye Tracker On Glasses, Tianxing Li, Xia Zhou

Dartmouth Scholarship

This paper presents a battery-free wearable eye tracker that tracks both the 2D position and diameter of a pupil based on its light absorption property. With a few near-infrared (NIR) lights and photodiodes around the eye, NIR lights sequentially illuminate the eye from various directions while photodiodes sense spatial patterns of reflected light, which are used to infer pupil’s position and diameter on the fly via a lightweight inference algorithm. The system also exploits characteristics of different eye movement stages and adjusts its sensing and computation accordingly for further energy savings. A prototype is built with off-the-shelf hardware components and …

Exploring Experiential Learning Model And Risk Management Process For An Undergraduate Software Architecture Course, Eng Lieh Ouh, Yunghans Irawan

Research Collection School Of Computing and Information Systems

This paper shares our insights on exploring theexperiential learning model and risk management process todesign an undergraduate software architecture course. The keychallenge for undergraduate students to appreciate softwarearchitecture design is usually their limited experience in thesoftware industry. In software architecture, the high-level designprinciples are heuristics lacking the absoluteness of firstprinciples which for inexperienced undergraduate students, thisis a frustrating divergence from what they used to value. From aneducator's perspective, teaching software architecture requirescontending with the problem of how to express this level ofabstraction practically and also make the learning realistic. Inthis paper, we propose a model adapting the concepts ofexperiential learning …

Teaching Adult Learners On Software Architecture Design Skills, Eng Lieh Ouh, Yunghans Irawan

Research Collection School Of Computing and Information Systems

Software architectures present high-level views ofsystems, enabling developers to abstract away the unnecessarydetails and focus on the overall big picture. Designing a softwarearchitecture is an essential skill in software engineering and adultlearners are seeking this skill to further progress in their career.With the technology revolution and advancements in this rapidlychanging world, the proportion of adult learners attendingcourses for continuing education are increasing. Their learningobjectives are no longer to obtain good grades but the practicalskills to enable them to perform better in their work and advancein their career. Teaching software architecture to upskill theseadult learners requires contending with the problem of …

Implementation Of Secure Dnp3 Architecture Of Scada System For Smart Grids, Uday Bhaskar Boyanapalli

Master of Science in Computer Science Theses

With the recent advances in the power grid system connecting to the internet, data sharing, and networking enables space for hackers to maliciously attack them based on their vulnerabilities. Vital stations in the smart grid are the generation, transmission, distribution, and customer substations are connected and controlled remotely by the network. Every substation is controlled by a Supervisory Control and Data Acquisition (SCADA) system which communicates on DNP3 protocol on Internet/IP which has many security vulnerabilities. This research will focus on Distributed Network Protocol (DNP3) communication which is used in the smart grid to communicate between the controller devices. We …

Efficient Attribute-Based Encryption With Blackbox Traceability, Shengmin Xu, Guomin Yang, Yi Mu, Ximeng Liu

Research Collection School Of Computing and Information Systems

Traitor tracing scheme can be used to identify a decryption key is illegally used in public-key encryption. In CCS’13, Liu et al. proposed an attribute-based traitor tracing (ABTT) scheme with blackbox traceability which can trace decryption keys embedded in a decryption blackbox/device rather than tracing a well-formed decryption key. However, the existing ABTT schemes with blackbox traceability are based on composite order group and the size of the decryption key depends on the policies and the number of system users. In this paper, we revisit blackbox ABTT and introduce a new primitive called attribute-based set encryption (ABSE) based on key-policy …

Dynamic Power System Training Simulation Platform And Tools For The Operational Management Of Smart Grids In The Liberalized Energy Market, Darlus France Mengapche

Doctoral

The major changes in distribution networks (medium and low voltage networks) over recent decades led to new challenges and issues in the operational management of these networks. Amongst others, issues such as load flow problems (power flow reversal, overloading of network equipment, network congestions), voltage problems (voltage limit violations, voltage increases and decreases, harmonics), power schedule management problems, network state estimation and problems with the operation of protection equipment could be encounterd. Besides, the control center staff which is confronted with new complex tasks, challenges and responsibilities, must be prepared and trained for the operational management of the future distribution …

Enhancing The Durability And The Service Life Of Asphalt Pavements Through Innovative Light-Induced Self-Healing Materials, Marwa Hassan

Publications

The objective of this study was to evaluate the efficiency of a new generation of Ultraviolet (UV) light-induced selfhealing polymers in enhancing the durability and self-healing properties of asphalt mixtures. Self-healing polymers were successfully synthesized in the laboratory and were characterized using Fourier Transform Infrared Spectroscopy (FTIR). In addition, Thermogravimetric Analysis (TGA) results showed that the synthesized polymers achieved the required thermal stability to resist asphalt mixture production processes. Viscosity results showed that addition of 5% Recycled Asphalt Shingle (RAS) and/or 20% Reclaimed Asphalt Pavement (RAP) caused an increase in the viscosity of the binder blends. However, a reduction in …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Publications

The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated in compression, tension, and bending to assess its mechanical properties. Furthermore, the cracking characteristics of the materials produced …

Modeling Sulfate Attack In Modern Concrete For Building Sustainable And Resilient Infrastructure, Zachary Grasley

Publications

External sulfate attack is a complex phenomenon and is manifested in the form of large expansion, cracking, and spalling depending on the exposure solution and material constituent properties. Several models were developed in the past to demonstrate sulfate attack mechanisms that account for the diffusion of sulfate ions into the porous concrete and the successive deformation triggered by the chemical reaction and precipitation of expansive agents. However, none of these models accounts for the effect of the migration of solvent water from the low solute concentration solution to high solute concentration solution driven by the osmotic pressure. Osmotic pressure is …

In-Situ Mechanical Characterization For Compacted Aggregates, Douglas Cortes, Paola Bandini

Publications

The evaluation of compacted unbound aggregate layers is perhaps the most common undertaking in transportation-related projects. The assessment of compaction compliance in engineered fills, subgrades, subbases, and bases in roadways and railways is central to ensure longevity of ground transportation infrastructure. In many cases, premature failures in roadways that originate in the unbound aggregate layers can be traced back to inadequate compaction. These failures are preventable, provided the problem areas can be identified by a suitable field test during construction. The most widely used method for compaction assessment during construction is the nuclear density gauge (NDG) test. While the device …

Bridge Inspecting With Unmanned Aerial Vehicles R&D, Paul Darby, Vijaya Gopu

Publications

The project achieves through research including literature, on site interviews, and experimentation: 1) a recommendation for a UAV-based system to practically assist in routine bridge inspection work in the State of Louisiana, 2) the identification and description of advantages, disadvantages, and limitations in the use of UAVs for routing bridge inspection work in Louisiana, and 3) provided recommendations for future work. The Yuneec H520 aircraft and its E90 camera are recommended, as is the need for a boat to be included as part of the system. The recommended system has advantages in reaching portions of the bridge that are difficult …

Use Of Rice Hull Ash (Rha) As A Sustainable Source Of Construction Material, Zahid Hossain, Ashraf Elsayed

Publications

With the imminent shortage of natural resources, the need to find sustainable development is the highest in recent history. Therefore, this study examines the potential uses of Rice Hull Ash (RHA) as a sustainable cementitious material (SCM) in preparation of concrete. This study also assesses the use of RHA as an alternative of commonly used polymers in preparing high-grade asphalt binders. RHA is a potential sustainable solution because it is currently being treated as an agricultural waste material, yet its high silica content makes it a potential construction material. Three different sizes of RHA (600 µm, 150 µm, and 44 …

Evaluating Annual Fixed Wing Maintenance Costs, Kirsten Bunecke, Edward D. White, Jonathan D. Ritschel, Brett A. Bush

Faculty Publications

This article serves two purposes: first, to empirically model the annual percentage increase of operations and support (O&S) costs for fixed wing aircraft; and second, to place into the archival realm another reference for other researchers to consider when investigating other O&S topics. For this study of 21 different airframes grouped together at the Mission- Design Series (MDS), maintenance subcategories 3.1 Consumable Materials and Repair Parts, 3.2 Depot Level Repairables (DLR), and 3.4 Depot Maintenance accounted for an average 91.5% of annual organic maintenance costs. For contractor-maintained MDS, subcategory 3.7, Contractor Logistics Support (CLS) accounted for 96.6% of annual maintenance …

Delineating Operating And Support Costs In Aircraft Platforms, Garrett B. O'Hanlon, Jonathan D. Ritschel, Edward D. White, Gregory E. Brown

Faculty Publications

As the costs of Department of Defense (DoD) Weapon Systems increase, the ability to estimate the Operating and Support (O&S) costs accurately for the various weapon systems has become vital to long-term affordability. This research focuses on the O&S costs of the Air Force fixed-wing arsenal (i.e., platforms) for 1996–2016. First, the Cost Element Structure (CES) for 52 aircraft platforms and seven operational mission categories is analyzed to derive the descriptive statistics per aircraft category through examination of actual historical costs. Second, testing to identify statistical differences within the O&S CES construct across various Air Force aircraft categories is conducted. …

Thermochemical Conversion Of Biomass: Detailed Gasification And Near-Burner Co-Firing Measurements, Jacob B. Beutler

Theses and Dissertations

An increasing emphasis on mitigating global climate change (global warming) over the last few decades has created interest in a broad range of sustainable or alternative energy systems to replace fossil fuel combustion. Biomass, when harvested responsibly, is a renewable fuel with many uses in replacing fossil fuels. Cofiring biomass with coal in traditional large-scale coal power plants represents one of the lowest risk, least costly, near-term methods of CO₂ mitigation. Simultaneously, it is one of the most efficient and inexpensive uses of biomass. Alternatively, biomass can be transformed into useful products through gasification to produce clean syngas for …

Phasorsec: Protocol Security Filters For Wide Area Measurement Systems, Prashant Anantharaman, Kartik Palani, Rafael Brantley, Sergey Bratus, Sean W. Smith

Dartmouth Scholarship

The addition of synchrophasors to the power grid to improve observability comes at the cost of an increased attack surface: the wide area measurement system. A common source of zero-days, that can be used to exploit the system, is improper input validation. The strict availability and timing requirements of the grid make it critical that input validation be done right and in a timely fashion. PhasorSec is a hardened security filter for the synchrophasor communication protocol, C37.118. PhasorSec is built using language theoretic principles which treat all input as a language with a specific grammar that defines what input must …

Open Source Low-Cost Power Monitoring System, Shane W. Oberloier, Joshua M. Pearce

Department of Materials Science and Engineering Publications

This study presents an entirely open-source, low-cost power monitoring system capable of many types of measurements including both loads and supplies such as solar photovoltaic systems. In addition, the system can be fabricated using only open source software and hardware. The design revolves around the Digital Universal Energy Logger (DUEL) Node, which is responsible for reading and properly scaling the voltage and current of a particular load, and then serializing it via an on-board ATTiny85 chip. The configuration of the DUEL node allows for custom sensitivity ranges, and can handle up to 50 A and 300 V. Up to 127 …

Fall 2018 Biomedical Engineering Newsletter, Department Of Biomedical Engineering, Michigan Technological University

Department of Biomedical Engineering Newsletters

Table of Contents

• Global Research, Local Impact: Keat Ghee Ong
• Mechanobiology: Sangyoon Han Measures Cellular Force
• Rupak Rajachar Accelerates Healing in Humans - and Whales
• Optical Elastography Gathers Better Data for Avon
• Making Stents: NSF Graduate Research Fellow Roger Guillory

Use Of Nanoclays As Alternatives Of Polymers Toward Improving Performance Of Asphalt Binders, Zahid Hossain, Ashraf Elsayed

Publications

The main goal of this study is to assess the feasibility of the use of nanoclay as an alternative to commonly used polymers such as styrene-butadiene-styrene (SBS), which are used to modify the performance grade (PG) of asphalt binders. Three types of nanoclay and two types of neat binders were selected for laboratory investigation. Different amounts (1, 2, and 3%) of nanoclays were used. A blending protocol has been developed to mix the nanoclay with the asphalt binder. Rotational Viscosity (RV), Dynamic Shear Rheometer (DSR), Optical Contact Analyzer (OCA) and Atomic Force Microscope (AFM) were conducted to evaluate the properties …

Development Of A Self-Healing And Rejuvenating Mechanisms For Asphalt Mixtures Containing Recycled Asphalt Shingle, Marwa Hassan

Publications

The objective of this study was to test the hypothesis that hollow-fibers encapsulating a rejuvenator product could improve both self-healing, rejuvenation, and mechanical properties of asphalt mixtures. Hollow-fibers containing a rejuvenating product were synthesized via a wet spinning procedure with sodium-alginate polymer as the encapsulating material. An optimization of the production parameters for the synthesis of fibers was performed to develop fibers suitable for high-temperature and shear stress environment typical of asphalt mixture production. A self-healing experiment was conducted to evaluate the healing/rejuvenation capabilities of sodium-alginate fibers in asphalt mixtures with varying types of binders and recycled materials. Based on …

Development Of A Standard Test Method For Characterization Of Asphalt Materials And Aging-Related Degradation Using An Extensional Rheometer, Nazimuddin Wasiuddin

Publications

An extensional deformation test method using a Sentmanat Extensional Rheometer (SER) fixture inside a Dynamic Shear Rheometer (DSR) is developed in this study to investigate the degradation of the polymer due to aging and to investigate the effect of modifier type. A relationship between different percentages of modifier and ductility of the modified binder is also investigated. The sample geometrics used in this study are 1 mm x 0.72 mm and 3 mm x 0.72 mm. A total of one hundred and sixty-two samples were tested. Three modifiers Styrene-Butadiene-Styrene (SBS), Polyphosphoric Acid (PPA) and latex were used. One PG 76-22, …

Development Of Environmentally-Friendly Stabilization Methods For Transportation Infrastructure Based On Geopolymers, Miladin Radovic, Anand Puppala

Publications

Geopolymers (GPs) have received much attention as an eco-friendly and sustainable alternative to conventional chemical additives, since they can be processed at room temperatures from aqueous solutions by utilizing waste materials (e.g. fly ash) or abundant natural sources (e.g. clay). A collaborative research study is carried out by teams from Texas A&M University (TAMU) and University of Texas at Arlington (UTA) to investigate the effectiveness of GPs for stabilizing base and subgrade materials by considering the strength and shrink-swell characteristics. Two types of clay, obtained from the North Dallas area, were mixed with a potassium-based GP synthesized from metakaolin and …

Sustainable And Equitable Financing For Pedestrian Infrastructure Maintenance, Gregory Rowangould

Publications

In many communities, pedestrian infrastructure is discontinuous, inaccessible to those with physical disabilities, and poorly maintained. Correcting these problems would be a first step in providing infrastructure to achieve the active travel and related transportation goals of many communities. One nearly universal challenge to maintaining sidewalks in a state of good repair and addressing environmental justice concerns is an adequate, sustainable, and equitable source of funding. Municipal governments across the country maintain and repair their streets and roadways; however, most require residents to maintain and repair public sidewalks adjacent to their property. These policies are difficult to enforce and may …

Bridge Deck Overlays Using Ultra-High Performance Concrete, Craig Newtson, Brad Weldon

Publications

This study investigated the use of a locally produced ultra-high performance concrete (UHPC) as an alternative to typical overlay materials. Several bond strength tests including slant-shear, splitting tension, and direct tension tests were performed to assess the bond strength between UHPC and normal strength concrete (NSC) substrate with varying surface textures. Tests were also conducted to assess the early-age and longer-term shrinkage behavior and coefficient of thermal expansion of the UHPC as well as rapid chloride permeability testing. Good bond between UHPC and NSC substrate was observed even with inadequate surface texture. Combined shrinkage and thermal effects were investigated for …

Consistent And Reproducible Cultures Of Large-Scale 3d Mammary Epithelial Structures Using An Accessible Bioprinting Platform, John A. Reid, Peter M. Mollica, Robert D. Bruno, Patrick C. Sachs

School of Medical Diagnostics & Translational Sciences Publications

Background: Standard three-dimensional (3D) in vitro culture techniques, such as those used for mammary epithelial cells, rely on random distribution of cells within hydrogels. Although these systems offer advantages over traditional 2D models, limitations persist owing to the lack of control over cellular placement within the hydrogel. This results in experimental inconsistencies and random organoid morphology. Robust, high-throughput experimentation requires greater standardization of 3D epithelial culture techniques.

Methods: Here, we detail the use of a 3D bioprinting platform as an investigative tool to control the 3D formation of organoids through the "self-assembly" of human mammary epithelial cells. Experimental bioprinting procedures …

What Do You Have That Others Don't?: Succeeding In Academia Or Industry, Amit Sheth

Publications

No abstract provided.