Engineering Commons^™

Factors Influencing Intranet Acceptance In Restaurant Industry: Use Of Technology Acceptance Model, Kunsoon Park, Narang Park, Wookjae Heo

Consumer Sciences Faculty Publications

This study examines factors influencing the user acceptance of intranets in the restaurant industry. The study uses the application of the technology acceptance model (TAM) in explaining intranet usage in restaurant operations. The TAM is an exceptional model for which to predict system usage and has been successfully applied to numerous technologies. The original model was modified to include two independent variables: organization support and information quality. The survey collected data from restaurants in the United States. The results of the study showed that perceived usefulness was the main factor influencing intranet acceptance, while organization support, information quality, and perceived …

Sensor-Enhanced Analysis And Behavior Of Steel Beams In Fire, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Traditionally, strain data are difficult, if not impossible, to obtain from steel structures in fire due to their harsh environment and temperature measurements are limited to the locations of thermocouples. This paper presents high-temperature measurements using a Brillouin scattering based (distributed) fiber optic sensor and the application of the measured temperatures and material parameters recommended in building codes into the enhanced thermo-mechanical analysis of simply-supported steel beams subjected to combined thermal and loading effects. The distributed temperature sensor captures detailed, non-uniform temperature distributions that are compared locally with thermocouple measurements by less than 5% at a 95% confidence level. The …

Hardware And Software (Ksu), Rebecca Rutherfoord, Dawn Tatum, Susan Vandeven, Richard Halstead-Nussloch, James Rutherfoord, Zhigang Li

Computer Science and Information Technology Grants Collections

This Grants Collection for Hardware and Software was created under a Round Eleven ALG Textbook Transformation Grant.

Affordable Learning Georgia Grants Collections are intended to provide faculty with the frameworks to quickly implement or revise the same materials as a Textbook Transformation Grants team, along with the aims and lessons learned from project teams during the implementation process.

Documents are in .pdf format, with a separate .docx (Word) version available for download. Each collection contains the following materials:

• Linked Syllabus
• Initial Proposal
• Final Report

The Robot-Transporter: Sex Trafficking, Autonomous Vehicles, And Criminal Liability For Manufacturers, Olivia Phillips

Dickinson Law Review (2017-Present)

Despite global condemnation, sex trafficking continues to plague our world. Even in developed countries, the problem persists. Technological advancements, like the Internet, have spurred the development of organized sex trafficking networks and have made “transactions” easier. Although law enforcement agencies have tried to adapt their investigative techniques to combat the problem, developments in technology move at a much quicker rate.

Autonomous vehicles (AVs) will present a new set of challenges for law enforcement agencies in the fight against sex trafficking. In the not-too-distant future, AVs, or “self-driving cars,” will dominate the roadways. An AV will be completely aware of the …

Development Of A Uav-Based System To Monitor Air Quality Over An Oil Field, Siwen Liu

Graduate Theses & Non-Theses

The growth of hydraulic fracturing has pushed the whole petroleum industries forward. As a result, gas (mainly methane [CH4]) emissions have significantly increased over the past decades (Macey et al., 2014). Gas leaks can occur at almost all stages of a petroleum production process, such as drilling, fracking, and refining. For years, ground-based air quality monitoring has been conducted around production sites. An improved understanding of air quality would be enabled by supplementing ground-based with airborne monitoring. The latter would involve the use of unmanned aerial vehicles (UAVs) to carry a compact, portable air monitoring system. The purpose of this …

Using Gs/S Adc To Evaluate The Emi Of Gan-Based Power Devices, Chi Zhang

Electrical Engineering Theses and Dissertations

As the silicon-based power devices are gradually reaching their performance limits, new power transistors such as Silicon Carbide (SiC) and Gallium Nitride (GaN) FETs have been rapidly developed in recent years. GaN devices have been widely accepted by researchers for its higher speed and efficiency than silicon power devices. However, despite all its merits, the GaN device faces a more severe problem of electromagnetic interference (EMI) than the silicon device due to its high performance. Various control techniques of EMI have been studied so far and many of them require the evaluation of EMI. Research shows that the EMI level …

Investigating The Effect Of Detecting And Mitigating A Ring Oscillator-Based Hardware Trojan, Lakshmi Ramakrishnan

Electrical Engineering Theses and Dissertations

The outsourcing of the manufacturing process of integrated circuits to fabrications plants all over the world has exposed these chips to several security threats, especially at the hardware level. There have been instances of malicious circuitry, such as backdoors, being added to circuits without the knowledge of the chip designers or vendors. Such threats could be immensely powerful and dangerous against confidentiality, among other vulnerabilities.

Defense mechanisms against such attacks have been probed and defense techniques have been developed. But with the passage of time, attack techniques have improved immensely as well. From directly observing the inputs or outputs, adversaries …

Standing-Wave Dielectric Array Antennas, Ayman Althuwayb

Electrical Engineering Theses and Dissertations

Due to the evolutions in wireless communication systems, antenna engineers have been confronting a number of challenges regarding improving the performance of antennas, miniaturizing the size as well as considering the fabrication simplicity. Although dielectric resonator antennas typically suffer from exhibiting low gain, they have been thoroughly under investigating as they are being excellent candidates to be utilized to fulfill contemporary communication systems requirements and specifications, especially at high-frequency ranges. The reason behind this solicitude is because they have several advantageous features, including but not limited to the simplicity of the used excitation mechanism and fabrication easiness.

One of the …

Network Design For In-Motion Wireless Charging Of Electric Vehicles: Models And Algorithms, Mamdouh Mubarak

Operations Research and Engineering Management Theses and Dissertations

The aim of this research is to study the optimal deployment of wireless charging stations (WCS) in urban transportation networks. It is widely acknowledged that the relatively short driving range of EV and the long battery charging times collectively lead to a phenomenon known as "range anxiety" of EV drivers. This phenomenon remains to be the major factor that hampers EV adoption. Thus, in this dissertation, we study a cost-effective deployment plan of WCSs that facilitates EV adoption by alleviating the two major causes of the “range anxiety” phenomenon.

In the first part of this dissertation, we propose a deployment …

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Experimental Investigation Of Two-Phase (Gas/Liquid) Flow In Intermediate Sized, Horizontal And Inclined Pipes, Noble C. Anumbe

Theses and Dissertations

Multiphase flow models and correlations are indispensable tools for the design and operation of vital flow systems that power various industries. The development, validation and tuning of these flow models & correlations depend on the availability of reliable and accurate data. This dissertation reports on an experimental campaign that not only generated crucial two-phase flow data but also evaluated the effect of inclination angle on several flow parameters of interest. The report details the experimental investigation of upward, adiabatic, co-current two-phase (gas/liquid) flow through a 101.6 mm inner diameter (ID) pipe. Experimental data for the investigation were acquired using an …

Local Deformation And Texture Of Cold-Rolled Aa6061 Aluminum Alloy, Diaoyu Zhou, Wenwen Du, Xiyu Wen, Junwei Qiao, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Using cold rolling, we plastically deform AA6061 sheets at room temperature and investigate the variations of the microstructures, textures and local deformation of the cold-rolled AA6061 sheets as functions of thickness reduction (Δt/t₀, t₀ and t are the thicknesses of the AA6061 sheet before and after the cold rolling, respectively). The volume fraction of total deformation texture is relatively independent of the thickness reduction for Δt/t₀ ≤ 30%, and becomes an approximately linearly increasing function of the thickness reduction for Δt/t₀ > 30%. Increasing the thickness reduction causes the increase of the Vickers hardness of the …

Personalized Health Knowledge Graph, Amelie Gyrard, Manas Gaur, Saeedeh Shekarpour, Krishnaprasad Thirunarayan, Amit Sheth

Publications

Our current health applications do not adequately take into account contextual and personalized knowledge about patients. In order to design “Personalized Coach for Healthcare” applications to manage chronic diseases, there is a need to create a Personalized Healthcare Knowledge Graph (PHKG) that takes into consideration a patient’s health condition (personalized knowledge) and enriches that with contextualized knowledge from environmental sensors and Web of Data (e.g., symptoms and treatments for diseases). To develop PHKG, aggregating knowledge from various heterogeneous sources such as the Internet of Things (IoT) devices, clinical notes, and Electronic Medical Records (EMRs) is necessary. In this paper, we …

Electrochemical Hydrogenation Of Acetone To Produce Isopropanol Using A Polymer Electrolyte Membrane Reactor, Chen Li, Ashanti M. Sallee, Xiaoyu Zhang, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

Electrochemical hydrogenation (ECH) of acetone is a relatively new method to produce isopropanol. It provides an alternative way of upgrading bio-fuels with less energy consumption and chemical waste as compared to conventional methods. In this paper, Polymer Electrolyte Membrane Fuel Cell (PEMFC) hardware was used as an electrochemical reactor to hydrogenate acetone to produce isopropanol and diisopropyl ether as a byproduct. High current efficiency (59.7%) and selectivity (>90%) were achieved, while ECH was carried out in mild conditions (65 degrees C and atmospheric pressure). Various operating parameters were evaluated to determine their effects on the yield of acetone and …

The Bridge Newsletter Winter 2018, Missouri University Of Science And Technology

The Bridge Newsletter

-Pouring the cornerstone for the ACML
-Showalter selected as Kiewit Faculty Scholar
-Ma tests a low-cost method of strengthening concrete

Metagenomics Reveal Triclosan-Induced Changes In The Antibiotic Resistome Of Anaerobic Digesters, M. Fujimoto, Daniel Elliott Carey, Patrick J. Mcnamara

Civil and Environmental Engineering Faculty Research and Publications

Triclosan (TCS) is a broad-spectrum antimicrobial used in a variety of consumer products. While it was recently banned from hand soaps in the US, it is still a key ingredient in a top-selling toothpaste. TCS is a hydrophobic micropollutant that is recalcitrant under anaerobic digestion thereby resulting in high TCS concentrations in biosolids. The objective of this study was to determine the impact of TCS on the antibiotic resistome and potential cross-protection in lab-scale anaerobic digesters using shotgun metagenomics. It was hypothesized that metagenomics would reveal selection for antibiotic resistance genes (ARGs) not previously found in pure culture studies or …

An Environmental Science And Engineering Framework For Combating Antimicrobial Resistance, Amy Pruden, Reinaldo E. Alcalde, Pedro J.J. Alvarez, Nicholas Ashbolt, Heather Bischel, Natalie L. Capiro, Emily Crossette, Dominic Frigon, Kassandra Grimes, Charles N. Haas, Kaoru Ikuma, Anthony D. Kappell, Timothy M. Lapara, Lee K. Kimbell, Mengyan Li, Xu Li, Patrick J. Mcnamara, Youngwoo Seo, Mark D. Sobsey, Emanuele Sozzi, Tala Navab-Daneshmand, Lutgarde Raskin, Maria Virginia Riquelme, Peter Vikesland, Krista Wigginton, Zhi Zhou

Civil and Environmental Engineering Faculty Research and Publications

On June 20, 2017, members of the environmental engineering and science (EES) community convened at the Association of Environmental Engineering and Science Professors (AEESP) Biennial Conference for a workshop on antimicrobial resistance. With over 80 registered participants, discussion groups focused on the following topics: risk assessment, monitoring, wastewater treatment, agricultural systems, and synergies. In this study, we summarize the consensus among the workshop participants regarding the role of the EES community in understanding and mitigating the spread of antibiotic resistance via environmental pathways. Environmental scientists and engineers offer a unique and interdisciplinary perspective and expertise needed for engaging with other …

Accounting For Landscape Heterogeneity Improves Spatial Predictions Of Tree Vulnerability To Drought, Amanda M. Schwantes, Anthony J. Parolari, Jennifer J. Swenson, Daniel M. Johnson, Jean-Christopher Domec, Robert B. Jackson, Norman F. Pelak, Amilcare Porporato

Civil and Environmental Engineering Faculty Research and Publications

As climate change continues, forest vulnerability to droughts and heatwaves is increasing, but vulnerability varies regionally and locally through landscape position. Also, most models used in forecasting forest responses to heat and drought do not incorporate relevant spatial processes.

In order to improve spatial predictions of tree vulnerability, we employed a nonlinear stochastic model of soil moisture dynamics accounting for landscape differences in aspect, topography and soils. Across a watershed in central Texas we modeled dynamic water stress for a dominant tree species, Juniperus ashei, and projected future dynamic water stress through the 21^st century.

Modeled dynamic water …

Strain And Damage Self-Sensing Of Basalt Fiber Reinforced Polymer Laminates Fabricated With Carbon Nanofibers/Epoxy Composites Under Tension, Yanlei Wang, Yongshuai Wang, Baolin Wan, Baoguo Han, Gaochuang Cai, Ruijuan Chang

Civil and Environmental Engineering Faculty Research and Publications

This study investigated the strain and damage self-sensing capabilities of basalt fiber reinforced polymer (BFRP) laminates fabricated with carbon nanofibers (CNFs)/epoxy composites subjected to tensile loadings. The conduction mechanisms based on the tunnel conduction and percolation conduction theories as well as the damage evolution were also explored. A compensation circuit with a half-bridge configuration was proposed. The results indicated the resistivity of the CNFs/BFRP laminates and CNFs/epoxy composites exhibited similar change rule, indicating that the conductive networks of CNFs/BFRP laminates were governed by CNFs/epoxy composites. With the increase of strain under monotonic tensile loading, the electrical resistance response could be …

Interface Model Of Pem Fuel Cell Membrane Steady-Dtate Behavior, Russell L. Edwards, Ayodeji Demuren

Mechanical & Aerospace Engineering Faculty Publications

Modeling works which simulate the proton-exchange membrane fuel cell with the computational fluid dynamics approach involve the simultaneous solution of multiple, interconnected physics equations for fluid flows, heat transport, electrochemical reactions, and both protonic and electronic conduction. Modeling efforts vary by how they treat the physics within and adjacent to the membrane-electrode assembly (MEA). Certain approaches treat the MEA not as part of the computational domain, but rather an interface connecting the anode and cathode computational domains. These approaches may lack the ability to consistently model catalyst layer losses and MEA ohmic resistance. This work presents an upgraded interface formulation …

Characterization And Evaluation Of Cordless Nailer Performance For Liquid And Gaseous Fuels, Mark Carioscio

Master's Theses (2009 -)

The Paslode Cordless XP Framing Nailer is a combustion-powered nail gun that operates using a fuel blend of a propylene and 1-butene. This tool is designed to drive nails using a piston driven by a combustion reaction. The current fuel blend is able to fire approximately 1200 shots per fuel cartridge and match the energy output of pneumatic, corded nailers on the market. This thesis is written with the intent to gain a better understanding of the operation of the tool and how its performance varies when the fuel source is altered. A bizonal combustion model was created to simulate …

A Study Of Rubberfatigue Life And Cure Parameters, Jack Alberts

Master's Theses (2009 -)

is demand for increasing rubber life in parts within medium and heavy duty suspension systems. Rubber plays a major factor in lightening the overall weight of the suspension system; therefore, increasing the hauling capacity of the truck. This thesis focused on optimizing the cure time and cure temperature of the manufacturing process as it relates to the fatigue life of rubber suspension parts. Samples of rubber parts were made using molding techniques with different process parameters, specifically cure time and temperature. These samples then underwent a series of nondestructive tests, to quantify, for example, dynamic stiffness, and then a destructive …

Parallel Implementation Of Facial Detection Using Graphics Processing Units, Russell Marineau

Master's Theses (2009 -)

This thesis proposes to study parallelization methods to improve the computational runtime of the popular Viola-Jones face detection algorithm. These methods employ multithreaded programming and CUDA programming approaches. The thesis provides a discussion of background information on all relevant topics, which is then followed by a presentation of the code architecture changes that are proposed. Specific implementation details are then discussed in more details followed by a discussion and comparison of results obtained through various tests. This thesis first begins by presenting a history and description of the Viola-Jones algorithm. Detailed explanations of each step in the process used to …

A Study Of The Diffusion Characteristics Of Tungsten Bar Stock And Tungsten Produced Via Direct Metal Laser Sintering (Dmls), Jonathan Robert Bruss

Master's Theses (2009 -)

Using a vacuum hot extraction method diffusivity and concentration of hydrogen were measured in samples of tungsten bar stock and direct metal laser sintered (DMLS) tungsten. It was found that the tungsten bar stock closely adhered to the model established by Frauenfelder. The DMLS samples approximately follow a downward sloping trend over the 500K-1200K temperature range. The trend is opposite of what is expected suggesting processing has a major effect on diffusion behavior. A CFD model was created using ANSYS Fluent to simulate the diffusion behavior. The model functions by separating out diffusion mechanisms and solving Fick’s law with each …

Changes In Cortical Activity In Stroke Survivors Undergoing Botulinum Toxin Therapy For Treatment Of Focal Spasticity, Kelsey Dianne Tynes

Master's Theses (2009 -)

Functional magnetic resonance imaging (fMRI) has provided evidence of neuroplastic changes following rehabilitation in stroke survivors. Botulinum toxin (BoNT) injection therapy has become a common approach to combating spasticity—a motor disorder characterized by a velocity dependent increase in muscle tone. The neurotoxin acts to inhibit muscle contraction, relieving spasticity symptoms with peak effects occurring between 4 and 6 weeks. With decreases in muscle tone, BoNT injections could free arm movement for rehabilitation, creating the opportunity for enhanced control of the upper limb, which would have underpinnings in altered brain activity. Given evidence of cortical activation changes following other stroke rehabilitative …

Uv-Based Advanced Oxidation Of P22 Bacteriophage And E. Coli Bacteria, Vincent Martino

Master's Theses (2009 -)

Two novel, sustainable UV-LED advanced oxidation processes (AOPs) were evaluated for their ability to improve inactivation efficacy of P22 bacteriophage and E. coli bacteria. The first objective of this research was to determine the treatment efficacy of P22 bacteriophage and E. coli bacteria using UV-LED at wavelengths of 255, 265, and 285 nm. The UV-LED system demonstrated high inactivation potential for both contaminants at all wavelengths, suggesting it could be a potential alternative to typical low-pressure and medium-pressure mercury-based UV systems. Increased inactivation of both microorganisms was observed with decreasing wavelength (255>265>285 nm). As the peak UV absorbance …

Coordinated, Multi-Arm Manipulation With Soft Robots, Dustan Paul Kraus

Theses and Dissertations

Soft lightweight robots provide an inherently safe solution to using robots in unmodeled environments by maintaining safety without increasing cost through expensive sensors. Unfortunately, many practical problems still need to be addressed before soft robots can become useful in real world tasks. Unlike traditional robots, soft robot geometry is not constant but can change with deflation and reinflation. Small errors in a robot's kinematic model can result in large errors in pose estimation of the end effector. This error, coupled with the inherent compliance of soft robots and the difficulty of soft robot joint angle sensing, makes it very challenging …

Ultra-Thin Coating And Three-Dimensional Electrode Structures To Boosted Thick Electrode Lithium-Ion Battery Performance, Jie Li, Yan Gao, Xinhua Liang, Jonghyun Park

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reports a multiscale controlled three‐dimensional (3D) electrode structure to boost the battery performance for thick electrode batteries with LiMn_1.5Ni_0.5O₄ as cathode material, which exhibits a high areal capacity (3.5 mAh/cm²) along with a high specific capacity (130 mAh/g). This excellent battery performance is achieved by a new concept of cell electrode fabrication, which simultaneously controls the electrode structure in a multiscale manner to address the key challenges of the material. Particles with ultrathin conformal coating layers are prepared through atomic layer deposition followed by a nanoscale‐controlled, thermal diffusion doping. The particles …

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Explosions of coal dust are a major safety concern within the coal mining industry. The explosion and subsequent fires caused by coal dust can result in significant property damage, loss of life in underground coal mines and damage to coal processing facilities. The United States Bureau of Mines conducted research on coal dust explosions until 1996 when it was dissolved. In the following years, the American Society for Testing and Materials (ASTM) developed a test standard, ASTM E1226, to provide a standard test method characterizing the “explosibility” of particulate solids of combustible materials suspended in air. The research presented herein …

A Deterministic-Stochastic Method For Computing The Boltzmann Collision Integral In O(Mn) Operations, Alexander Alekseenko, Truong Nguyen, Aihua W. Wood

Faculty Publications

We developed and implemented a numerical algorithm for evaluating the Boltzmann collision integral with O(MN) operations, where N is the number of the discrete velocity points and M < N. At the base of the algorithm are nodal-discontinuous Galerkin discretizations of the collision operator on uniform grids and a bilinear convolution form of the Galerkin projection of the collision operator. Efficiency of the algorithm is achieved by applying singular value decomposition compression of the discrete collision kernel and by approximating the kinetic solution by a sum of Maxwellian streams using a stochastic likelihood maximization algorithm. Accuracy of the method is …