Engineering Commons^™

Development, Training, Education, And Implementation Of Low-Cost Sensing Technologies For Bridge Structural Health Monitoring (Shm), Fernando Moreu, Chris Lippitt, Dilendra Maharjan, Marlon Aguero, Roya Nasimi

Data

Corresponding data set for Tran-SET Project No. 17STUNM02. Abstract of the final report is stated below for reference:

"Transportation infrastructure needs continuous monitoring. However, traditional inspections cost money and are conducted visually. New technologies for bridge monitoring are expensive and complex. This project involved developing cost-effective sensor technologies that can be applied towards the maintenance of railroad bridges by recording reference-free transverse displacement. More specifically, this project developed new applications of new technologies (Arduino, wireless smart sensors, drones, Hololens) and promoted workforce development with an emphasis on outreach of high-school students. This project was carried out in three main phases: …

Evaluation Of The Performance And Cost-Effectiveness Of Engineered Cementitious Composites (Ecc) Produced From Region 6 Local Materials, Gabriel Andres Arce Amador, Tyson Rupnow, Marwa Hassan

Data

Corresponding data set for Tran-SET Project No. 17CLSU05. Abstract of the final report is stated below for reference:

"The project objective is to develop cost-effective Engineered Cementitious Composites (ECC) with locally available ingredients in Region 6 to address the deficiencies observed in ordinary concrete materials. The study explored the utilization of two types of river sands (coarse and fine), two types of PVA fibers (long and short), four levels of cement replacement with Class F fly ash, and the implementation of recycled crumb rubber in the performance of ECC materials. A total of 24 mix designs were prepared and evaluated …

Impacts Of Moisture On Asphalt Properties, Zahid Hossain

Data

Corresponding data set for Tran-SET Project No. 17BASU03. Abstract of the final report is stated below for reference:

"Stripping related moisture damage has been recognized as one of the major pavement distresses since the early 1990s. The main objective of this study is to establish an effective test protocol to quantify moisture susceptibility of asphalt pavements. To this end, selective test methods (Texas Boiling test, Tensile Strength Ratio, Retained Stability, and Hamburg Wheel Test), and procedures based on surface chemistries and molecular-level mechanistic properties have been investigated in this study. Firstly, a comprehensive list of literature related to moisture damage …

Integrated Health Monitoring And Reinforcement Of Transportation Structures With Optimized Low-Cost Multifunctional Braided Cables, Ibrahim Karaman, Darren Hartl

Data

Corresponding data set for Tran-SET Project No. 17STTAM04. Abstract of the final report is stated below for reference:

"Corresponding data set for The objective of this research study is to design, fabricate, and characterize multifunctional high strength and self-sensing braided cables and structures using novel Fe-based shape memory alloys (SMAs). The system exploits unique properties of recently developed low-cost super-elastic FeMnAlNi SMAs, which enables excellent super-elastic properties, high strength, and self-sensing in structural health monitoring (SHM) systems. This novel material technology can be coupled with modeling efforts that allow for accurate prediction of both the materials and structural response during …

Investigating Problem Of Distracted Drivers On Louisiana Roadways, Xiaoduan Sun

Data

Corresponding data set for Tran-SET Project No. 17SALSU10. Abstract of the final report is stated below for reference:

"Due to the escalating usage of cellphone and social networking, distracted driving is and will remain as one of the most serious problems faced by Departments of Transportation (DOTs) and law enforcement agencies. Under the aim of in-depth investigation of distracted driving crashes in Louisiana, the specific objectives of this study are: (1) reviewing the crash reports for the quality of distracted driving crash reporting, (2) analyzing distracted driving-related crashes through regression model and data mining algorithm to link the severity of …

Modeling Harmonic Impacts Of Electric Vehicle Chargers On Distribution Networks, Nicole Woodman, Robert B. Bass, Mike Donnelly

Electrical and Computer Engineering Faculty Publications and Presentations

As the proliferation of electric vehicles continues to grow, it is becoming important to understand the impacts that electric vehicle charging will have on distribution assets. EV chargers are non-linear, multi-state loads. This manuscript presents a design method for the modeling of EV charging units using a VHDL-AMS simulation environment, per IEEE Standard 1076.1. Voltage and current data collected from in-service EV charging stations were used to create harmonic profiles of the EV charging units. From these profiles, generalized models for both Level 2 and Level 3 EV chargers were created. These models were validated within a larger system context …

Modeling The Sustainability Of Small Unmanned Aerial Vehicles Technologies: Final Report, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

In the past decade, unmanned aerial vehicles (UAV) have become increasingly more popular in the commercial sector. Drones are being used for all kinds of purposes, such as surveillance, inspecting architecture, filming, wildlife research, and more. Freight delivery is a potential application that is getting lots of attention from large companies.

This research presented novel data, relationship, and models for deliveries utilizing small UAVs. Small UAVs were defined as aircrafts with a tare of up to 15 kilograms (kg) and a potential payload of up to 15 kg. Since the weight of the UAVs is capped, only drones with engines …

The Passive Effects Of Full-Gateway, In-Street Signs On Vehicular Speed, De'lon Dixon

Masters Theses

Reducing motorist’s speed when approaching crosswalks is an important goal in reducing the number of collision between motorist and pedestrian in crosswalks. The current study addresses this goal. The effect of gateway installation of in-street signs (one in-street sign installed between the two travel lanes in each direction and one on both edges of the roadway in each direction) on vehicle speed was evaluated on nine roads. The results demonstrated that the Gateway in-street sign treatment produced large speed reductions as vehicles approached the crosswalk and at the crosswalk. The average speed reduction was 3.8 mph at the crosswalk and …

Stereotypic Repetitive Hand Flapping Movement Detector Children With Autism, Subodh Ashok Bansode

Masters Theses

The prevalence of Autism Spectrum Disorder (ASD) has increased at a significant rate in recent years, especially in developed nations such as the United States, Japan, and South Korea. Extensive research is being carried out to study the behavioral characteristics of the disease. Children affected with autism tend to exhibit a spectrum of symptoms depending on the severity of the disease. These behaviors are primarily repetitive, self-stimulatory, and stereotypic behaviors such as hand flapping (i.e., repeatedly shaking their hands), body rocking (i.e., swaying their body back and forth), drumming, walking around in a confined space, and walking with shortened steps …

Use Of Pv/T Panels To Meet The Building Loads Of Light Commercialized Buildings, Sadhvi Arora

Masters Theses and Doctoral Dissertations

This thesis deals with the analysis of a Photo Voltaic Thermal (PV/T) panel that is capable of producing simultaneously electric power and low-grade heat energy by absorbing the solar energy striking on its surface. A simple mathematical model is developed to estimate the electric power and heat energy gained by the PV/T panel. A water-to-water heat pump is employed that operates by absorbing the low-grade heat energy obtained from PV/T panel, in its evaporator, in order to produce high temperature hot water in its condenser. The high temperature hot water thus produced can be employed to meet the winter heating …

Assessment Of Small-Scale Anisotropy In Stably Stratified Turbulent Flows Using Direct Numerical Simulations, Amrapalli Garanaik, Subhas Karan Venayagamoorthy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, the validity of the widely used Kolmogorov hypothesis of local isotropy of dissipative scales in stably stratified turbulent flows is investigated using high-resolution direct numerical simulations. Departure from isotropy is investigated for the first time in terms of the turbulent Froude number defined as Fr = ϵ/(NEk), where N is the buoyancy frequency, Ek is the turbulent kinetic energy, and ϵ is the rate of dissipation of turbulent kinetic energy. It is shown that for both ϵ and the rate of scalar (density) dissipation, ϵρ, the small-scale statistics are nearly isotropic in the weakly stratified turbulent regime …

Improving The Quality Of Traffic Records For Traffic Incident Management, Reginald R. Souleyrette, Mei Chen, Xu Zhang, Eric R. Green, Shraddha Sagar

Kentucky Transportation Center Research Report

Traffic incidents in US roadways cause 25 percent of all delays experienced by users. The resulting congestion may lead to secondary crashes, increasing economic costs and further risking the lives of travelers. Traffic Incident Management is a process that detects, responds to, and clears traffic incidents as quickly as possible so that traffic flow is restored safely. This project analyzes the three TIM performance measures: Roadway Clearance Time, Incident Clearance Time and Secondary Crashes of Kentucky to identify a baseline for performance which may indicate potential for improvement. The study pinpoints different data sources, tools and technologies that can be …

Design And Analysis Of Binary Driven Coherent M-Ary Qam Transmitter For Next Generation Optical Networks, Naji Albakay

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

This work presents a design for a binary driven optical square M-ary quadrature amplitude modulation (QAM) transmitter for high speed optical networks. The transmitter applies tandem quadrature phase shift keying (QPSK) modulators to eliminate the need for linear broadband amplifiers and high-resolution digital to analog converters (DACs), which are both required by conventional transmitters. The transmitter design could be scaled to any order of square M-ary QAM by simply adding more QPSK modulators in tandem. It also provides a Gray coded symbol constellation, insuring the lowest bit error rate possible during symbol recovery. We also provide the design for the …

Mitigating Loss Of Control In General Aviation: A Human-Systems Integrated Flight Test Method For Mapping Pilot Cognition And Aircraft Dynamics, Tiziano Bernard

Theses and Dissertations

General aviation (GA) loss of control accidents, in the United States, have continued to occur despite efforts by government and non-government research agencies. The lack of data during loss of control events (due to the absence of data recorders in small aircraft) does not allow for an accurate reconstruction of the accidents, causing accident investigators to focus on generic causes like pilot error. Flight test research has shown that there are various systems induced causal factors that can potentially set up an aircraft to depart controlled flight and do not aid pilot efforts. An example of these causal factors is …

Evaluating Load Adjusted Learning Strategies For Client Service Levels Prediction From Cloud-Hosted Video Servers, Ruairí De Fréin, Obinna Izima, Mark Davis

Conference papers

Network managers that succeed in improving the accuracy of client video service level predictions, where the video is deployed in a cloud infrastructure, will have the ability to deliver responsive, SLA-compliant service to their customers. Meeting up-time guarantees, achieving rapid first-call resolution, and minimizing time-to-recovery af- ter video service outages will maintain customer loyalty.

To date, regression-based models have been applied to generate these predictions for client machines using the kernel metrics of a server clus- ter. The effect of time-varying loads on cloud-hosted video servers, which arise due to dynamic user requests have not been leveraged to improve prediction …

Novel Methods For The Crystallization Of Thin Film Silicon, Shane Mcmahon

Legacy Theses & Dissertations (2009 - 2024)

Underpinning much of the technological innovation over the past few decades in the fields of sensors, lighting, displays, and energy conversion has been thin-film electronics. While many of the surfaces in our environment have curvature, silicon wafers do not. Flexible electronics attempt to overcome this fundamental limitation in form factor. Flexible thin-film transistors (TFTs) can be fabricated over large areas to provide switching and driving elements for displays and other devices. While printable organic semiconductors have made significant advances over the past few years, they cannot match the performance capability, electrical quality, temperature compatibility, or stability of silicon. For this …

The Live Load Response Of The Open Web Steel Joist Black Slough Bridge, Piero Caputo

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The bridge being studied spans the Black Slough River in the Nucor/Vulcraft facilities near Brigham City, Utah. The bridge is composed of seven heavyweight open web steel joists supporting a concrete deck-slab element and sitting in two concrete cantilever walls serving as bearings. A full-scale live-load test was performed using forklift vehicles at four locations on the deck. During the test, axial strains, deflections, and rotations where measured.

In their provisions, the American Association of State Highway and Transportation Officials (AASHTO) included a simplified number of equations and solutions used to calculate GDFs for standardized decks supported by beam systems. …

Energy Harvesting Device Using Ferrofluids Slugs In Microchannels, Omkar Amar Pawar

Mechanical and Aerospace Engineering Theses - Archive

This research proposes a new concept of energy harvesting with the help of oscillating slugs of ferrofluid in microchannels. Ferrofluids are colloidal suspension of paramagnetic nanoparticles which get magnetized in the presence of magnetic field. They can conform to any shape and can be injected easily in intricate spaces. A change in the magnetic flux through the solenoid area produces electromotive force per Faraday’s law. To prove the concept of harvesting energy by having a change in magnetic flux with the help of ferrofluids, several ferrofluid slugs were made to pass through a multi turn solenoid wound around a glass …

Evaluation Of Deformable Posts In The Zoi And Rigid Posts In Stiff Soil, Thomas Ammon

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Debris fences are commonly used by states, in conjunction with a concrete parapet, to protect railway tracks. Their use limits the intrusion of debris that could damage tracks or clutter rail lines. Due to a lack of previously crash-tested systems, the safety performance of such designs are largely unknown. The Iowa Department of Transportation (DOT) desired that researchers at the Midwest Roadside Safety Facility (MwRSF) design a crashworthy debris fence mounted on top of a concrete parapet to meet the Manual for Assessing Safety Hardware (MASH) TL-3 crash test conditions. Part 1 of this thesis details the literature review and …

Morphological Features Of Dysplastic Progression In Epithelium: Quantification Of Cytological, Microendoscopic, And Second Harmonic Generation Images, Sandra Patricia Gordon

Graduate Theses and Dissertations

Advances in imaging technology have led to a variety of available clinical and investigational systems. In this collection of studies, we tested the relevance of morphological image feature quantification on several imaging systems and epithelial tissues. Quantification carries the benefit of creating numerical baselines and thresholds of healthy and abnormal tissues, to potentially aid clinicians in determining a diagnosis, as well as providing researchers with standardized, unbiased results for future dissemination and comparison.

Morphological image features in proflavine stained oral cells were compared qualitatively to traditional Giemsa stained cells, and then we quantified the nuclear to cytoplasm ratio. We determined …

Automatic Performance Optimization On Heterogeneous Computer Systems Using Manycore Coprocessors, Chenggang Lai

Graduate Theses and Dissertations

Emerging computer architectures and advanced computing technologies, such as Intel’s Many Integrated Core (MIC) Architecture and graphics processing units (GPU), provide a promising solution to employ parallelism for achieving high performance, scalability and low power consumption. As a result, accelerators have become a crucial part in developing supercomputers. Accelerators usually equip with different types of cores and memory. It will compel application developers to reach challenging performance goals. The added complexity has led to the development of task-based runtime systems, which allow complex computations to be expressed as task graphs, and rely on scheduling algorithms to perform load balancing between …

An Rs-485 Transceiver In A Silicon Carbide Cmos Process, Maria Raquel Benavides Herrera

Graduate Theses and Dissertations

This thesis presents the design, simulation and test results of a silicon carbide (SiC) RS-485 transceiver for high temperature applications. This circuit is a building block in the design and fabrication of a digital data processing and control system. Automation processes for extreme environments, remote connection to high temperature locations, deep earth drilling, and high temperature data acquisition are some of the potential applications for such a system. The transceiver was designed and developed in a 1.2 µm SiC-CMOS process by Raytheon Systems, Ltd. (UK). It has been tested with a supply voltage of 12 V and 15 V, temperatures …

Evaluation Of Bike Boxes And Protected Intersections With Bicycle Signal Treatments For Improving Safety And Multimodal Mobility At Urban Signalized Intersections, Odai Al Houz

Masters Theses

With the dramatic increase of non-motorized transportation users, more people are concerned about the non-motorized traffic safety. Unfortunately, bicyclist and pedestrian are prone to more severe injuries when involved in a crash. For bicycle crashes, failing to yield/disregarding traffic control device, and lack of non-motorized facilities were identified to be the main causes of bicycle crashes in urban intersections. This research investigated the effectiveness of two bicycle crash countermeasures with bicycle signal treatments at urban signalized intersections. The two countermeasures are the bike boxes and the protected intersections. The bicycle signal treatments are the leading bicycle interval and the exclusive …

Variable Reluctance Virtual Torque Sensor For Automotive Applications, Vivek Iddum

Masters Theses

Torque sensing has been realized as one of the critical aspects in improving the dynamic vehicle performance in automotive systems. This thesis mainly presents the work on the development of a novel torque measurement method based on the estimation of nth-order flywheel angular acceleration from the variable reluctance flywheel speed sensor pulses. The number of firings in the engine determine the order of the harmonic to be used for torque estimation. The nth-order flywheel angular acceleration is computed using a micro-controller with built in timer counter and an associated signal conditioning circuit. The pulses obtained from the flywheel speed sensor …

Design Of A Portable Biogas Purification And Storage System, Anilkumar Kosna

Masters Theses

Biogas is produced from the decomposition of organic materials like manure, sewage sludge or crop fodders in anaerobic digesters. It consists mainly of 40 – 75 % of methane (CH₄), 15 – 60 % of carbon dioxide (CO₂) and trace amounts of other components. The principle constituents of biogas are similar to natural gas. Natural gas has 87 – 97 % of methane (CH₄) and 0.1 – 1 % of carbon dioxide. Natural gas is known to be an alternative fuel with a wide range of applications. The commercial purification technologies exist for large-scale …

Enabling Robust Distributed Real-Time Hybrid Simulation Method And Expanding Its Applications In Floating Wind Turbine Systems, Mehmet Cinar

Masters Theses

Real-time hybrid simulation (RTHS), which integrates physical experiment and numerical simulation, plays an essential role in understanding the time-dependent behavior of structures when subject to hazardous loadings. On the other hand, RTHS might not yield accurate results for complex structural systems due to experimental and computational limitations. Distributed real-time hybrid simulation (dRTHS), which takes the advantage of distributed laboratory facilities using network communications, was proposed and proven to address some limitations in RTHS. During dRTHS, Internet delay due to the network communication is added to the actuator delay in RTHS, which may cause inaccurate results or even unstable tests. To …

Service Learning Through Extracurricular Activities: Development And Implementation Of A Transportation Engineering Learning Module, Karla Diaz Corro

Civil Engineering Undergraduate Honors Theses

This project developed an easy to implement, low-cost learning module. The module has students compare and contrast the challenges of gathering comprehensive and quality transportation data through advanced technologies and traditional approaches while introducing traffic engineering topics like traffic signal timing. The modules target middle through high school students and first and second year undergraduate engineering students. The learning modules introduce transportation engineering using an engaging open-source computer simulation game adapted by students at the University of Arkansas, as part of a capstone project. The activities in the learning modules require off-the shelf, low-cost computer hardware, making it easy for …

Thermal Comfort In Heated-And-Ventilated-Only Warehouses, Christian Taber, Donald G. Colliver

Biosystems and Agricultural Engineering Faculty Publications

Building energy codes and standards contain minimum requirements that provide a path to energy efficient buildings and building systems. ASHRAE/IES Standard 90.1 and the International Energy Conservation Code (IECC) are the main national building code models in the United States. Both Standard 90.1 and the IECC are updated on three-year cycles with the goal of reducing building energy consumption.

Dc-Dc 4-Switch Buck-Boost Converter For Energy Harvesting From Elliptical Machines, Alexander C. Samietz, Gustavo Guzman

Electrical Engineering

The senior project report documents the process of replacing the network of resistors inside an elliptical machine with a DC-DC buck-boost converter. The buck-boost DC-DC converter accepts a wide input range of 5-60 Volts, with an output of 36 Volts for the most efficient use of the already available microinverter. The microinverter reclaims the lost energy and safely distributes it back to the electrical grid. The addition of this project reduces heat emissions from wasted energy and shrinks the carbon footprint of its users.

Test Bench Design For The Fontana Gaf Facility, Dalton Paul Wunderlich

Electrical Engineering

This senior design project consists of designing and building a test bench set up in the GAF facility located in Fontana CA. The project creates an area where testing of different configurations of equipment takes place before implementing the equipment on the production line. Having this isolated environment allows the engineers and technicians to follow several design build test iterations on new systems. The design has the versatility to handle different equipment set ups and test a large quantity of diverse situations. The test bench implements Allen Bradley ControLogix, PLC-5, multiple Powerflex drives and multiple Kinetix servo drives simultaneously. The …