Engineering Commons^™

The Second Wind, Jacob Heiss, Logan Neidert

Williams Honors College, Honors Research Projects

The Second Wind device is a set of sensors and a data processing unit capable of recording data necessary to conduct a simplified version of a complex cardiopulmonary stress test (CPET). This data includes VO2, VCO2, ventilation, and pulse oximetry data. VO2 and VCO2 are the percent, by volume, of oxygen and carbon dioxide in the patient's breath, spirometry is the measure of air flow, and the pulse oximetry data includes heart rate (HR) and percent oxygen in the blood (SpO2). In addition, the device was designed to be portable, so this test could be run from patients’ homes or …

Safe Pass, Alycia Riese, Julia Hariharan, Greg Synek, Jonathan Hall

Williams Honors College, Honors Research Projects

The purpose of this project is to design a sensor to be mounted on Class IV and higher vehicles to detect on-coming traffic. If traffic has been detected, the system is to warn drivers behind the stopped vehicle that passing is unsafe. The vehicle detection is to be implemented using a LiDAR detection method along with signal processing. A wireless transceiver is to transmit from the front radar module to the rear warning indicator module when the conditions are unsafe for passing. The project goals are to increase road safety and maintain traffic flow. The report details the challenges due …

Generator Design: A Study Of Optimized Airflow, Rachel Wattleworth

Williams Honors College, Honors Research Projects

The core goal of this project was to prototype, test, and evaluate a new type of fan for the Safran Electrical & Power air-cooled generators. The idea of a new fan being made for these two generators arose when they were not adhering to design requirements. A base mixed-flow fan was created to test on multiple generators. Upon creating a prototype, it will be tested to prove if it can increase the air flow, decrease temperatures, and increase power and life of the machines. They all proved to be successful and achieve the main objectives for this project. Data such …

Ergoscopetm – Ergonomic Endoscope, Drew Drum, John D'Egidio, Bethany Scarpitti, Ceara Stack, Sara Kerestman

Williams Honors College, Honors Research Projects

Medical endoscopy is a growing industry, with a trend of chronic hand pain for gastroenterologists and flexible endoscope users. In order to address the lack of ergonomics in traditional gastrointestinal (GI) flexible endoscopes, the design team collaborated with a GI professional to design a more ergonomic endoscope interface, focusing on the more problematic controls. Two prototypes, as well as a mock-up were fabricated, which underwent verification and a user evaluation to assess the design’s benefits. As the number of endoscopies each year increase, the Ergoscope, offers an alternative to the traditional angulation controls and muchneeded relief for the issues that …

Form Stable Phase-Change Materials, Russell Dent, Marjan Kashfipour, Nitin Mehra, Jiahua Zhu

Williams Honors College, Honors Research Projects

This work investigates the use of two different polyols, xylitol (Xyl) and erythritol (Ery), in conjunction with boron nitride (BN) aerogels, for the purpose of creating thermally conductive composites. While the BN filler in Xyl composites achieved a high anisotropic thermal conductivity of up to 4.53 W/m-K at 18.2 weight percent filler loading, they do not exhibit good phase-change material qualities due to a low solidification enthalpy even at low cooling rates. Alternatively, the BN-Ery composites have shown promising results with a solidification enthalpy of 225.14 J/g and a melting enthalpy of 385.84 J/g at a heat rate of 5 …

Artificial Intelligence In Wastewater Treatment Facilities: Implementing Practical New Technologies For The End User, Jordan Spano

Williams Honors College, Honors Research Projects

Design phase operator input can prove useful; however, it is not essential in every application, as Akron’s treatment plant implemented AI to increase treatment capacity without design-phase operator input. They implemented a system flight simulator, a few hours training, and have communicated with the designer to make system tweaks as needed. In larger applications, the owner may benefit greatly by incorporating design input from operational staff. Those representing a municipality as a project owner for a treatment plant upgrade should always maintain an active role in the design of smart water infrastructure. They must keep the operators in mind when …

Power Wheelchair Canopy, Mohamed F. Battah, Joshua D. Brown, Dujuan J. Mcclendon, Gavin M. Francisco

Williams Honors College, Honors Research Projects

Some power wheelchair users can not drive and independently hold an umbrella at the time because they do not have much upper body strength. Therefore, users are unprotected from the rain and are getting soaking wet. One of the members of this group is in a wheelchair and faces this problem. He has previously searched for something to protect him from rain, but could not found something he could independently use. What users need is a powered umbrella that attaches to their power wheelchair. There is no such umbrella available in the market. In this project, the solution to this …

The Effect Of Behavioral Traits And Background On Engineering Students’ Decision-Making Process Compared To Business Students, Joe Scott

Williams Honors College, Honors Research Projects

This paper looks to narrow down the reasons that students undertake new credentials, specifically in sales fields. With a focus on character traits and upbringing, the goal is to ensure that there is a better understanding of the reasons that people undertake these credentials. The different benefits of credentials will be analyzed to determine the most influential reason that people would be willing to move forward. The combination of these factors will be used to provide recommendations of the best way to reach and influence the decision of the engineering students.

Fatigue Tester, Nicholas Fazio

Williams Honors College, Honors Research Projects

The purpose of this project is to combine all my experience, knowledge and skills that I’ve acquired over the years as a Mechanical Engineering Technology student to completely design and build a fatigue tester. This will give me valuable experience in the process of designing and assembling a product and give me a great example to add to my portfolio. The tester will be completed through a process of researching design and modeling. Once everything is properly calculated and designed the parts that can be fabricated will. The rest will be ordered and then everything will be assembled. Upon completion, …

Quickcough: An Instrumentational Proximal Airway Clearance Technique (Act) For Select Patients With Neuromuscular Disease (Nmd), Sean X. Sullivan, Russell K. Catania, Madison K. Plaster, Sydney E. Kandray, Mariah Costa

Williams Honors College, Honors Research Projects

Patients with neuromuscular disease (NMD) requiring tracheostomy and mechanical ventilation secondary to respiratory failure encounter increased difficulty in removing pulmonary secretions from the airways. To combat issues associated with current treatment modalities for insufficient cough efficacy (cost, poor mobility, discomfort, lack of evidence), we have developed an instrumentational proximal airway clearance technique (ACT) which augments a manual proximal ACT developed by a client with NMD. QuickCough is a 3D-printed PLA attachment to the tracheostomy apparatus which has demonstrated its ability to facilitate pressure changes necessary to increase patient’s peak cough flow (PCF) by providing a stronger exsufflation for the patient. …

Autonomous Vehicles, Sarah Flis

Williams Honors College, Honors Research Projects

Some research objectives to be considered in this paper will include: What are the general advantages and disadvantages of having fully autonomous vehicles? What research has been done on the safety of them and what needs to be done to improve that safety? In order to have the safest and most efficient system for autonomous vehicles, will there be a place for older vehicles that require a human to operate in this new transportation system? Where does Ohio stand in the development of autonomous vehicles and what steps are they taking to prepare for such technology?

Another important research objective …

Analysis Of Standardized Concrete Mixes, Riley Graybeal

Williams Honors College, Honors Research Projects

Concrete is one of the most common materials used in construction. It is mass produced throughout the country, with numerous different designs for concrete mixes. A common practice among concrete manufacturers is to use a standardized concrete mix design. These standardized mix designs are pre-tested and are not usually altered frequently. The hypothesis of this research project is that manufacturers do not constantly investigate new ways to save on their mixes, and simply use the same standardized mix designs.

In this research, investigations into what alterations may reduce the cost of standardized mixes began with a baseline mix design provided …

Cycle Assist, Tyler Matthews

Williams Honors College, Honors Research Projects

The senior engineering design project presented in the paper that succeeds this, outlines the steps taken to design and implement an electronic bicycle that is able to keep a user’s heart-rate in a selected “intensity zone” though the use of an electronic motor and custom control circuitry. My portion of this project was to allow for safe and consistent power delivery to the rest of the electronics. That is to say, I built a battery pack and battery management system (BMS) to safely supply sufficient power to the rest of the electronics that were required for this project. In order …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Development And Exploration Of A Z-Shaped Foot And Ankle Internal Fixation Plate, Rhaz Shaghaghi Paul, Ian Hames, Sean Rich

Williams Honors College, Honors Research Projects

This paper will detail the design process of developing a Z-shaped foot and ankle internal fixation plating system. Group 6: Plates for the Sole was made up of 5 team members, who worked together to accommodate their client’s request to complete a biomechanical analysis of a Z-Plate design and a construct a prototype. The Z-Plate’s purpose is to provide podiatrists with a new solution that can fit nicely on the small, irregular bones of the foot, while also remaining strong enough to withstand the forces and torques of the foot.

Recumbent Bicycle Balancing Aid, James Hager

Williams Honors College, Honors Research Projects

For our senior design project, our team will be consulting to create a balancing aid system intended for the recumbent bicycle shown below in Figure 1. The owner of the bicycle is Robert Henderson, a former United States Navy sailor from Northeast Ohio who picked up biking and skiing while he was stationed in Maine in the late 80’s. While there, he took to the mountains on the rugged terrain and brought this passion of biking back home to share with his wife, Johanna once he completed his service to his country. Biking became an integral part of the …

Interlaminar Damage Detection In Composite Materials, Hariharan Rangarajan

Williams Honors College, Honors Research Projects

Using ceramic matrix composites (CMCs) for high-temperature applications in jet engines increases durability and reduces weight and cooling requirements resulting in improved efficiency and fuel savings. Understanding, detecting, and monitoring different types of damage is essential to achieve optimal performance of CMC components. The Direct Current Potential Drop (DCPD) method is a non-destructive technique of estimating damage in composite materials.

DCPD technique works by measuring nodal potential differences when current is flown through the material. Direct current spreading in different woven and laminate composites is modeled to follow a ladder resistor network in which the nodal voltages decrease exponentially as …

Testing Of A Human Powered Vehicle, Bailey Conard, Marlee Reynolds

Williams Honors College, Honors Research Projects

The University of Akron’s Human Powered Vehicle Team designed a high performing, fully functioning vehicle that is safe, efficient, and practical for the 2018-2019 season. These objectives were the main priorities when it came to the initial stages of designing the vehicle. In addition, the vehicle was designed in accordance with the ASME 2019 Human Powered Vehicle Challenge guidelines to satisfy all the rules and requirements. Additional priorities have been created to teach practical engineering skills and techniques to the students participating in the project through different points in the production process including research, vehicle design, manufacturing, and testing.

The …

Examination Of Ice Impactor And Mold, Matt Wilson

Williams Honors College, Honors Research Projects

This research project investigates impact and damage response of composite sandwich structures impacted with solid ice at extreme low-temperature. Composite sandwich structures of carbon fiber reinforced polymer sheets lining a polyvinyl chloride foam core are subjected to low-velocity impact at arctic temperatures. This impact will be delivered by a solid ice tool-tip via a drop impact testing machine. Data and test results acquired will be composed into a research report that will be submitted to The University of Akron and published in a scientific journal. This project builds upon the earlier study by Elamin, Li, & Tan (2018).

Prevention Of Harmful Algal Blooms By The Mitigation Of Phosphorus Nutrient Loading Via Filtration By Steel Wool And Activated Carbon, Ronald Simpson, Sara Kidd, Samantha Zidd

Williams Honors College, Honors Research Projects

Harmful Algal Blooms (HABs) are a devastating ecological and economic consequence of the abundance of nutrient-rich agricultural runoff entering aquatic ecosystems (Baker et al. 2014). Bio-available phosphorus from synthetic fertilizers is one of the major nutrients contributing to this global issue. Previous studies indicated that dissolved phosphorus can be removed from an aqueous environment when passed through a composite mixture of granular steel wool particles and activated carbon (Erickson, Gulliver, and Weiss, 2007). In this project, we conducted experiments using higher quality concentration measurements to determine what grades of steel wool (SW-0000, SW-000, SW-00) and types of activated carbon (granulated …

S.A.V.E. M.E., Taylor Davis, Kelly Nicole O'Neill, Adrianna M. Dunlap, Parsa Esshaghi Bayat

Williams Honors College, Honors Research Projects

S.A.V.E. M.E. stands for Submerged Automated Vehicular Elevation Minor Extraction or alternatively a Home Swimming Pool Rescue Device. The objective of this project is to design and prototype a system that will make unattended swimming pools through detecting a victim’s presence, deploying a means to save the victim, and alerting others nearby of the situation. This system encompasses sensors and devices within the pool and an alarm system outside of the pool. Upon detection of a sufficiently sized object entering the pool when the system is armed, a device will maneuver to the victim and deploy a flotation device that …

Dynamic Voltage Rail Audio Amplifier, Evan Von Duhn, Timothy Oshatiouk, Slavisa Tosanovic, Andrew Cantrell

Williams Honors College, Honors Research Projects

The goal of this project is to create a high-quality, power-efficient audio amplifier. Most modern audio amplifiers use a constant amount of power regardless of the signal that is being amplified. This means that both loud and quiet portions of the audio signal require the same amount of power to amplify. The idea for this high-quality, power-efficient audio amplifier is that the quieter portions of the audio signal can be amplified using less power. This will be achieved by first analyzing the audio signal and controlling the power source based on the signal’s needs. Therefore, louder parts of the audio …

Easy Adjustable Protective Helmet, Ryan Balash

Williams Honors College, Honors Research Projects

Akron Children’s Hospital and The University of Akron’s Biomedical Engineering Design Team Engineering Forward have paired together to improve medical adapted helmets for post-operative and disabled patients. An issue is the helmets are only produced in a couple of sizes. Also, it is a tedious process to constantly adjust the pressure on the patient’s cranium within a trial-and-error process. Engineering Forward plans to improve the effectiveness of this helmet by creating an adjustable helmet that can read the pressure on a patient’s head. The caregiver can then make the necessary adjustments to the helmet to accommodate the patient. Documents of …

Surf Zone Tilt Current Meter, Troy Heitmann

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Coastal tides and free surface gravity waves locally interact with the nearshore bathymetry generating spatially diverse circulation cells. Collectively, the cells form a current velocity flow field where net transport of geological, chemical, or biological, particulates takes place. Within the surf zone, dynamic instabilities lead to chaotic evolution and mixing, where single point, observations fail to quantitatively char­acterize the system as a whole. Governed by advanced theories, numerical models provide the necessary sampling resolution to study surf zone processes over large do­mains, but the model must be validated with field observations to draw meaningful conclusions. The acoustic Doppler current profiler …

Developing In Situ Dissolved Inorganic Carbon Dioxide Instrumentation, Beckett Colson

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

The ocean carbon system plays a critical role in regulating carbon dioxide content in the atmosphere. With increased anthropogenic carbon input, it is even more important to understand the system through measurements, models, and predictions. Unfortunately, the spatiotemporal resolution of ocean carbon system measurements is limited by a lack of in situ instrumentation. The support of the Link Foundation Ocean Engineering and Instrumentation Fellowship has enabled me to make significant progress in developing an in situ carbon system instrument for the deep sea. The instrument will measure both total dissolved inorganic carbon (DIC) and the partial pressure of carbon dioxide …

Link Foundation Fellowship Report, Eric Nieves

Link Foundation Ocean Engineering and Instrumentation Fellowship Reports

Magnetic anomaly detection (MAD) is a leading technique for the detection and localization of obscured magnetic targets via exploiting the field anomalies they create. This is especially true in marine environments when looking for unexploded ordnance (UXO), because the DC magnetic field is not highly influenced by numerous types of media (i.e. water) or weather conditions. MAD is also a passive technique, which allows it to go unnoticed by the target. Whereas current applications of MAD have been shown to be effective for localizing single targets at a time, the development of a method for multiple localization would the robustness …

Cell Type And Substrate Dependence Of Fibronectin Properties And Mechanotransduction, Navpreet S. Saini

Theses and Dissertations

Fibronectin is an important protein that is able to bind to other fibronectin molecules and to cell surface receptors. In doing so, the interactions fibronectin can perform is important for the processes of cell migration and tissue formation. Understanding the properties of fibronectin and fibril assembly is useful for areas such as wound healing, where fibronectin molecules are assembled to protect the tissue and to perform other tasks. Because of these reasons, it is important to understand how fibronectin is assembled and how its properties affect the fibril assembly, which in return affects the way the cell matrix operates. Previously …

Design And Testing Of An Agonist-Antagonist Position-Impedance Controlled Myoelectric Prosthesis, Christopher Aymonin

Theses and Dissertations

Intuitive prosthetic control is limited by the inability to easily convey intention and perceive physical requirements of the task. Rather than providing haptic feedback and allowing users to consciously control every component of manipulation, relegating some aspects of control to the device may simplify operation. This study focuses on the development and testing of a control scheme able to identify object stiffness and regulate impedance. The system includes an algorithm to detect the apparent stiffness of an object, a proportional nonlinear EMG control algorithm for interpreting a user’s desired grasp aperture, and an antagonistically acting impedance controller. Performance of a …

Electric Load Forecasting Using Long Short-Term Memory Algorithm, Tianshu Yang

Theses and Dissertations

Abstract

Power system load forecasting refers to the study or uses a mathematical method to process

past and future loads systematically, taking into account important system operating

characteristics, capacity expansion decisions, natural conditions, and social impacts, to

meet specific accuracy requirements. Dependence of this, determine the load value at a

specific moment in the future. Improving the level of load forecasting technology is

conducive to the planned power management, which is conducive to rationally arranging

the grid operation mode and unit maintenance plan, and is conducive to formulating

reasonable power supply construction plans and facilitating power improvement, and

improve the …

Speech Enabled Navigation In Virtual Environments, Raksha Rajashekar

Browse all Theses and Dissertations

Navigating in a Virtual Environment with traditional input devices such as mouse, joysticks and keyboards provide limited maneuverability and is also time consuming. While working in a virtual environment, changing parameters to obtain the desired visualization requires time to achieve by manually entering parameter values in an algorithm to test outcomes. The following thesis presents an alternate user interface to reduce user efforts, while navigating within the Virtual Environment. The user interface is an Android application which is designed to accommodate spoken commands. This Speech Enabled User Interface termed as the Speech Navigation Application (SNA), provides the user with an …