Engineering Commons^™

Framework For Evaluating Traffic Management Services In Higher Airspace, Jennifer Gentry, Debra Moch-Mooney, Anuja Mahashabde

Space Traffic Management Conference

Flying faster, farther, longer and higher has always captured the public’s imagination. Yet there is a vast realm of airspace that remains unexplored, save for a handful of scientific and national security missions. It is a realm rife with extremes, where flights can reach multi-Mach speeds or stay aloft for months as they slowly circumnavigate the globe. It is a realm that lies high above the clouds, at the edge of space.

Recent breakthroughs in technology, fueled by a globalized economy and society’s appetite for information, have set the stage for routine commercial operations in this new realm. Companies, old …

Space Launch And Reentry Operations Collaborative Decision Making (Cdm) Concept, Catherine N. Bolczak, Diane E. Boone, Bill Lash, Constance E. Morgan

Space Traffic Management Conference

The Federal Aviation Administration’s Air Traffic Organization manages the National Airspace System (NAS) for all users. Demand for this airspace is growing as space launch and reentry (L/R) operations increase in number, vehicle and mission types, and locations. Collaborative Decision Making (CDM) is a well-established practice for resolving airspace demand issues among multiple NAS users as it considers multiple stakeholders’ perspectives to make informed decisions. The MITRE Corporation is conducting research on how CDM principles can be applied to L/R operations and has developed an initial Space CDM concept. Our paper describes this concept, including high-level operational elements and supporting …

Sharing Airspace: Simulation Of Commercial Space Launch Impacts On Airlines And Finding Solutions, Janet K. Tinoco, Chunyan Yu, Rodrigo Firmo, Carlos Castro, Mohammad Moallemi

Space Traffic Management Conference

As space vehicles travel through the national airspace systems during the launch and re-entry stages, many believe that the increasing commercial space activities will have significant impacts on commercial aviation. Airlines, in particular, are apprehensive about the immediate negative effects in terms of flight time delays, uncertainties, and costs and are increasingly expressing their concerns to government. Meanwhile, the commercial space launch industry is advancing innovation and fueling state economic growth. Hence, the safe and effective integration of commercial launch activities into airspace is of national concern. Finding an equitable solution for commercial space and for commercial airlines is clearly …

Assessment Of The Impact Of Air Launch Operations On Air Traffic In Europe, Sven Kaltenhaeuser, Tanja Luchkova, Niklas Klay, Rui Bin Randy Ang

Space Traffic Management Conference

The development in commercial space transportation is strongly driven by a growing demand for payload capacities and cost efficient access to space. Accordingly, there is also a demand for further launch opportunities in the European region. Factors such as short waiting times for launches, rapid response capabilities, proximity of production sites to the launch site and independence from established and highly utilized launch systems are increasingly playing a role. Air launches are discussed as a way to meet this demand. They also offer the particular advantage of relatively low requirements on infrastructure and location of the spaceport compared to conventional …

Chip-Off Success Rate Analysis Comparing Temperature And Chip Type, Choli Ence, Joan Runs Through, Gary D. Cantrell

Journal of Digital Forensics, Security and Law

Throughout the digital forensic community, chip-off analysis provides examiners with a technique to obtain a physical acquisition from locked or damaged digital device. Thermal based chip-analysis relies upon the application of heat to remove the flash memory chip from the circuit board. Occasionally, a flash memory chip fails to successfully read despite following similar protocols as other flash memory chips. Previous research found the application of high temperatures increased the number of bit errors present in the flash memory chip. The purpose of this study is to analyze data collected from chip-off analyses to determine if a statistical difference exists …

On The Non-Existence Of Solutions Of Equations Of A Two-Liquid Medium With The Same Pressure, M.M. Mamatqulov, N. Dilmurodov, A.E. Kxolmurodov, X.X. Imomnazarov

Scientific Journal of Samarkand University

The initial-boundary value problem for systems of viscous two-fluid media with the same pressure in components is considered. Using the trial function method proposed in the works of Pohozhaev and Mitidieri, the influence of boundary and initial conditions on the appearance and time of destruction of solutions of these problems is investigated.

Sensing And Quantifying A New Mechanism For Vehicle Brake Creep Groan, Dejian Meng, Lijun Zhang, Xiaotian Xu, Yousef Sardahi, Gang Chen

All Engineering Faculty Research

This paper investigates the creep groan of a vehicle’s brake experimentally, analytically, and numerically. Experimentally, the effects of acceleration on caliper and strut, noise, brake pressure, and tension are measured. The results show that the measured signals and their relevant spectra broadly capture the complex vibrations of creep groan. This includes the simple stick-slip, severe stick-slip vibrations/resonances, multiple harmonics, half-order harmonics; stick-slip-induced impulsive vibrations, steady/unstable vibrations, and their transitions. Analytically, a new mathematical model is presented to capture the unique features of half-order harmonics and the connections to fundamental stick-slip/resonant frequency and multiple harmonics. The analytical solution and the experimental …

Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Joseph E. Remias, Cameron A. Lippert, Kunlei Liu

Center for Applied Energy Research Faculty Patents

A method of increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.

The Energy Efficiency Of Separation Mixture "Solid-Solid" Method, Alisher Shonazarovich Abdullaev, Aziza Urazalievna Abdurahimova, Sadogat Shonazarovna Abdullaeva, Khabibulla Sagdullaevich Nurmukhamedov

Chemical Technology, Control and Management

Characteristics of using a fluidized bed in a hydro classifier for the separation of the mixture “pulp - peel” are shown. The study results of separation degree of the pulp R from the skin in three-phase fluidization as a function of the Reynolds number Re with the ratio of the gas and liquid phases G:L = 0.15:1 and G: W = 0.25:1 are presented. Research has found that with equivalent diameter of the skin of root and tuber crops de = 2-8 mm, with of gas and liquid phases G:L = 0.15: 1, and also with live cross-section of the …

Is Dns Ready For Ubiquitous Internet Of Things?, Zhiwei Yan, Hongtao Li, Sherali Zeadally, Yu Zheng, Guanggang Geng

Information Science Faculty Publications

The vision of the Internet of Things (IoT) covers not only the well-regulated processes of specific applications in different areas but also includes ubiquitous connectivity of more generic objects (or things and devices) in the physical world and the related information in the virtual world. For example, a typical IoT application, such as a smart city, includes smarter urban transport networks, upgraded water supply, and waste-disposal facilities, along with more efficient ways to light and heat buildings. For smart city applications and others, we require unique naming of every object and a secure, scalable, and efficient name resolution which can …

Application Of The Second-Order Comprehensive Adjoint Sensitivity Analysis Methodology To Compute First- And Second-Order Sensitivities Of Flux Functionals In A Multiplying System With Source, Dan Gabriel Cacuci

Faculty Publications

This work presents an application of the Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the neutron transport Boltzmann equation that models a multiplying subcritical system comprising a nonfission neutron source to compute efficiently and exactly all of the first- and second-order functional derivatives (sensitivities) of a detector’s response to all of the model’s parameters, including isotopic number densities, microscopic cross sections, fission spectrum, sources, and detector response function. As indicated by the general theoretical considerations underlying the 2nd-ASAM, the number of computations required to obtain the first and second orders increases linearly in augmented Hilbert spaces as opposed to increasing …

Quality, Performance, And Consumer Perceptions: A National Study Of Us Airlines, Kaetlyn Blocker, Brent D. Bowen, Timothy B. Holt, Jacqueline R. Luedtke, Tori Kobayashi, Calissa Spooner, Dean Headley

Student Works

Prior inquiry into consumer perceptions, attitudes, and overall satisfaction regarding commercial mainline passenger carriers in the United States has provided little more than a "snapshot" of the average air traveler. Building on 28 continuous years of research with the National Airline Quality Rating (AQR), this study attempts to move beyond descriptive information in order to identify relationships and trends in the airline industry’s performance and relate those observations to consumer perceptions. This study will utilize a comparative trend analysis methodology to analyze major United States Airlines' performance and quality over the last 28 years. This methodology provides a means of …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• College Team Wins 3-Day Startup Competition

Cutter Elements For Drill Bits And Methods For Fabricating Same, Guodong Zhan, Biju P. Kumar, Russell C. Gilleylen, Michael D. Hughes, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

A method of fabricating a PCD cutter element including a diamond table including a plurality of coated diamond particles fabricated using an atomic layer deposition (ALD) process.

Cutter Elements For Drill Bits And Methods For Fabricating Same, Guodong Zhan, Biju Pillai Kumar, Russell C. Gilleylen, Michael D. Hughes, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

A method of fabricating a PCD cutter element including a diamond table including a plurality of coated diamond particles fabricated using an atomic layer deposition (ALD) process.

Evaluation Of Unmanned Aircraft Flying Qualities Using A Stitched Learjet Model, Patrick M. Callaghan

Theses and Dissertations

In recent years, military UAVs have taken over missions that were too dull, dirty, or dangerous for manned aircraft. The increased demand has led to a build-fly-fix-fly development mentality, plaguing the early lifecycle with staggering mishap rates. Currently, MIL-STD-1797 lists flying qualities for UAVs as TBD, and the standards for manned fixed wing are inadequate when applied to UAVs. In an effort to expand the database of UAV flying qualities, an analysis was completed on a Simulink model of an LJ-25D developed from Calspans Variable Stability System aircraft at the United States Test Pilot School. Three maneuvers were simulated: (1) …

Assessing Data Availability And Research Reproducibility In Hydrology And Water Resources, James H. Stagge, David E. Rosenberg, Adel M. Abdallah, Hadia Akbar, Nour A. Atallah, Ryan James

Civil and Environmental Engineering Faculty Publications

There is broad interest to improve the reproducibility of published research. We developed a survey tool to assess the availability of digital research artifacts published alongside peer-reviewed journal articles (e.g. data, models, code, directions for use) and reproducibility of article results. We used the tool to assess 360 of the 1,989 articles published by six hydrology and water resources journals in 2017. Like studies from other fields, we reproduced results for only a small fraction of articles (1.6% of tested articles) using their available artifacts. We estimated, with 95% confidence, that results might be reproduced for only 0.6% to 6.8% …

Limits To The World’S Green Water Resources For Food, Feed, Fiber, Timber, And Bioenergy, Joep F. Schyns, Arjen Y. Hoekstra, Martijn J. Booij, Rick J. Hogeboom, Mesfin Mekonnen

Daugherty Water for Food Global Institute: Faculty Publications

Green water––rainfall over land that eventually flows back to the atmosphere as evapotranspiration––is the main source of water to produce food, feed, fiber, timber, and bioenergy. To understand how freshwater scarcity constrains production of these goods, we need to consider limits to the green water footprint (WFg), the green water flow allocated to human society. However, research traditionally focuses on scarcity of blue water––groundwater and surface water. Here we expand the debate on water scarcity by considering green water scarcity (WSg). At 5 × 5 arc-minute spatial resolution, we quantify WFg and the maximum sustainable level to this footprint (WFg,m), …

15 Outstanding Students Recognized At Awards Banquet | College Of Engineering, Utah State University

College of Engineering News

The College of Engineering extends its heartfelt congratulations to the 15 undergraduate students recognized at Friday’s Engineers Week Awards Banquet.

Faculty Award Winners Recognized At Awards Banquet |College Of Engineering, Utah State University

College of Engineering News

The College of Engineering extends its congratulations to the two faculty award winners recognized at Friday’s Engineers Week Awards Banquet.

Progress In The Research On Drilling Technology And Equipment In Coal Mining Areas Of China, Li Quanxin, Shi Zhijun, Tian Hongliang, Yao Ke, Liu Jianlin, Yao Yafeng, Xu Chao, Fang Jun, Liu Fei

Coal Geology & Exploration

Drilling technology and equipment play a key role in coalbed methane(gas) development and ensuring coal mine safe production in coal mining areas. The complicated geological and mining conditions of coal seams in China determine that the drilling technology and equipment must be based on the basic situation of coal mining areas and take the way of independent innovation. The representative achievements of drilling technology and equipment in coal mining area during the Eleventh Five-Year Plan and the Twelfth Five-Year Plan were systematically summarized in this paper. Additionally, it presents comprehensive introduction to the great achievements of surface drilling and underground …

Research On Key Technology Of The 15 000 N·M High-Power Directional Drilling Rig, Fang Peng

Coal Geology & Exploration

According to the actual demand for ultra-long distance directional drilling in coal seam and large diameter directional drilling in seam roof, and the function of compound directional drilling technology for drilling rig, the technical idea of modular development for the functional development and design of high-power directional drilling rig are put forward. Combined with the contradiction among high-power matching, large capacity output and compact layout design of drilling rig, the key technologies of 15 000 N·m high-power directional drilling rig are researched in this paper, including overall layout design, large capacity rotary head design and layer board analysis, large opening …

Design Of Remote Control System Of Drilling Rig In Coal Mines, Weng Yinsheng, Wu Di, Lu Feifei, Wang Longpeng

Coal Geology & Exploration

In order to solve the influence of the dangerous conditions in the deep mine, such as large percus-sive ground pressure and high temperature and humidity of the roadways in deep mines on drilling operation, a remote control drilling rig control system is designed. The control system consists of local control terminal and remote control terminal, both communicating by CAN(Controller Area Network) bus and optical fiber for data and image. Local control terminal core uses automobile PLC(Programmable Logic Controller) as the control core to realize data acquisition and control, develops program in CoDeSys. The remote control terminal, based on MCU and …

Hole-Bottom Hydraulic Pressurization Technology For Directional Drilling In Hard Rock In Underground Coal Mines, Xu Baolong, Yao Ningping, Wang Li, Cao Jing, Dou Xuqian

Coal Geology & Exploration

In order to solve the problem of large feeding pressure, low drilling efficiency and limited hole depth caused by the backing effect of drill string during directional drilling of deep hole in underground coal mines, a technical idea of using hydraulic tool to increase WOB was proposed. The structural design of the hydraulic pressurizer at the bottom of the hole was carried out by drawing on the structure of the hydraulic pressurizer in the field of oil drilling and combining the nearly horizontal drilling conditions in underground coal mines. The hydraulic parameters were designed by the theoretical calculation and the …

Progress And Prospects Of Coal Geological Work In Tibet, Qiao Junwei, Ning Shuzheng, Song Shiyu, Yang Cheng

Coal Geology & Exploration

Through the summary of the coal geological work and achievements in Tibet for nearly 70 years, the current status and main results of coal geological exploration in the main coal mines in the region were reviewed. The formation age, distribution range, coal content and coal quality characteristics of coal-bearing strata in major coal mines in the region were found out. The division of coal-bearing tectonic units and coal-accumulating basins in Tibet was summarized, and the sedimentary systems and sedimentary environments of coal-bearing strata in the main coal-forming periods were preliminarily summarized. It is generally believed that the overall degree of …

Geological Consideration For Site Selection Of Underground Coal Gasifier, Han Lei, Qin Yong, Wang Zuotang

Coal Geology & Exploration

Underground coal gasification(UCG) is a revolution in traditional coal mining technology, and the site selection of underground coal gasifier is a prerequisite for a successful UCG project. Refining and analyzing the previous research results, the principle of UCG and the geological controls of site selection of underground coal gasifier were reviewed. The results show that lignite is the most suitable for UCG. UCG should choose thickness greater than 2 m, angle is less than 70° and buried depth of coal seam is 300 to 2 000 meters. At the same time, the UCG process may pollute the groundwater, and the …

Fracture Extension Law Of Hydraulic Fracture In Coal With Different Structure, Jia Qifeng, Ni Xiaoming, Zhao Yongchao, Cao Yunxing

Coal Geology & Exploration

To find out the fracture extension law of coal hydraulic fracturing with different coal body structures can lay a foundation for reasonable well pattern deployment. Taking Shizhuang block of Qinshui basin as the research object, the fracture of coal core was observed, and four kinds of coal with fracture development degree were divided. Based on the theory of rock mass mechanics, the stress field calculation model of fracture tip and the judgment criterion of whether hydraulic fracture can pass through natural fracture in hydraulic fracturing process were established. According to the measured data of CBM wells, the reliability of theoretical …

Study On Pore Structure And Pressure-Sensitive Effect Of Tectonic Coal In Huaibei Xutuan Mine, Dong Kui, Jia Jiancheng, Gong Zewen, Wu Yan

Coal Geology & Exploration

In order to discuss pore structure and pressure-sensitive effect of tectonic coal, coal samples of Huaibei Xutuan mine were measured by optical microscope, scanning electron microscope, mercury injection, and triaxial servo-controlled seepage equipment for thermo-fluid-solid coupling to reveal the pore structure and the influence of effective stress on permeability or permeability coefficient of structural coal. The results show that cataclastic structure of tectonic coal is regular, flat and has good connectivity; the pores of primary coal are mainly composed of micropores, micropores and transitional pores are dominant in tectonic coal has. The effective stress of ductile deformed coal has a …

Preparation Of Polished Slice Of Special Coal And Its Influence On Coal Petrology Analysis, Liu Shande

Coal Geology & Exploration

Coal petrology analysis is widely used in coal facies research, geological exploration and coal blending test. Qualified polished coal slice is the premise of coal petrology analysis. In order to solve the preparation problem of special coal optical plates, such as brittle samples and aging coal optical plates, a complete preparation process was raised, and the feasibility of the process was verified. The results showed that R_max was very little affected by secondary preparation, but the maceral group composition content was significantly affected, and the fluctuation of the anthracite' microcomponent was the greatest. When the maceral group composition quantification …

Analysis Of Diffusion Properties Of Methane In Low Rank Coal, Meng Zhaoping, Zhang Guiyuan, Li Guoqing, Liu Jinrong

Coal Geology & Exploration

Diffusion properties of methane in coal is an important reservoir parameter affecting CBM production. Using the lignite samples from the Xiaolongtan Formation of the Miocene Neogene in southeastern Yunnan Province, the isothermal adsorption experiments of methane in low rank coal were carried out. Based on the relationship between adsorption amount and time obtained from isothermal adsorption experiment, the diffusion coefficient of methane in coal was calculated by using an unipore model of unsteady gas diffusion. The diffusion law of methane in coal and its control mechanism were revealed. The results show that gas diffusion law in coal obeys Langmuir equation; …