Engineering Commons^™

Feasibility Study Of Dartmouth's Renewable Energy Future, Lily R. Hanig

ENGS 88 Honors Thesis (AB Students)

This is a feasibility study of Dartmouth's Renewable Energy propositions. This study analyzes the carbon offsets of implementing a 13 MW solar PV system at Oak Hill. This study used the Energy Database to calculate the carbon emissions of the college for 2010 (the baseline year) and 2018. It also projected carbon emissions for the year 2025 assuming the Oak Hill solar PV system is implemented as outlined and the biomass plant is implemented with similar fuel ratios to nearby biomass plant projects. It was found that Dartmouth should sufficiently make its carbon emissions reductions goals for 2025.

Spatial Frequency Domain Imaging Of Short-Wave Infrared Fluorescence For Biomedical Applications, Joseph P. Leonor

ENGS 88 Honors Thesis (AB Students)

Fluorescence imaging has become a standard in many clinical applications, such as tumor and vasculature imaging. One application that is becoming more prominent in cancer treatment is fluorescence-guided surgery (FGS). Currently, FGS allows surgeons the ability to visually navigate tumors and tissue structures intraoperatively. As a result, they can remove tumor more efficiently while maintaining critical structures within the patient, creating better outcomes and lower recovery times. However, background fluorescence and inability to localize depth create challenges when determining resection boundaries.

Different techniques, such as spatially modulating the illumination and imaging at longer light wavelengths, have been developed to accurately …

Surface Engineering Of Annealed High Entropy Alloys Towards Thermodynamically Stable, Anti-Oxidation, Solar Selective Absorbers, Sheppard R. Somers

ENGS 88 Honors Thesis (AB Students)

Concentrating solar power (CSP) systems require receivers that maintain their physical properties at the high operating temperature and are absorbent. The high entropy alloy Fe28.2Ni18.8Mn32.9Al14.1Cr6 (HEA) investigated in this thesis fills these needs by harnessing the HEA’s oxidation process to create a selective solar absorbing layer that grows at a parabolic rate at CSP operating temperatures. Results of this research demonstrate that annealing processes of HEA can yield over 90% solar thermal efficiency by engineering the surface oxidation to be both physically and optically optimized for absorption.

Western Kentucky University Stormwater Utility Survey 2019, C. Warren Campbell

SEAS Faculty Publications

No abstract provided.

Nano-Enhanced Composite Membranes For Water Desalination, Benjamin Fredrik Victor Sundling Von Fürstenrecht

Materials Engineering

In theory single walled carbon nanotubes (SWCNT) will aid in ion rejection due hydrophobicity and smoothness of the SWCNT. An efficient means of water desalination utilizing SWCNT in a membrane seems plausible. A lyotropic liquid crystal (LLC) solution was made with a synthesized polymerizable surfactant methacryloxy ethyl hexadecyl dimethyl ammonium bromide (C16MA) to help with vertical alignment of SWCNT. Due to SWCNT lack of solubility and tendency to agglomerate in water, a dispersion performed using an inert surfactant centrimonium bromide (CTAB) to make sure that the SWCNT were homogeneously dispersed in the solution without altering the hexagonal packing factor of …

Seismic Performance Of Mid-Rise Code-Conforming X-Braced Steel Frames, Mokhtar Ansari, Hosein Gholi Pour, Amir Safiey

Publications

Prolixity and complexities inherent in the nonlinear dynamic analysis (NDA) impel engineers to lean towards nonlinear static analysis (NSA) in practice. This paper partly explores differences and similarities in responses obtained from these two simulation techniques. The scope of the study is narrowed down to ubiquitous regular code-conforming mid-rise steel X-braced frames. Different common lateral load patterns are coupled with NSA to study their interactive effects on responses. The modal nonlinear static analysis is also carried out, where deemed necessary. NDA using three different earthquake records are conducted as well, to validate NSA results. Results of nonlinear analyses are undertaken …

Nonlinear Mechanical Properties Of Road Pavements: Geometric Symmetries Explain The Empirical Difference Between Roads Built On Clay Vs. Granular Soils, Afshin Gholamy, Vladik Kreinovich

Departmental Technical Reports (CS)

It is empirically known that roads built on clay soils have different nonlinear mechanical properties than roads built on granular soils (such as gravel or sand). In this paper, we show that this difficult-to-explain empirical fact can be naturally explained if we analyze the corresponding geometric symmetries.

Investigation Of Copper Infiltration Alloys For Use In Metal Matrix Composite Drill Bits, Samuel J. Stueland, Timothy P. Markiewicz

Materials Engineering

A newly developed copper-based alloy, P98-X1 was tested for compressive strength to predict qualitative performance compared to MF53, F-Bronze, CuNiSn, and CuMnNi for use as the infiltration alloy in metal matrix composite (MMC) drill bits. Ingots of each alloy were cast using an arc furnace and cut into compression testing samples using wire electrical discharge machining (EDM). The alloys were selected for testing based on solid solution strengthening coefficient and melting point. Five of each alloy were compression tested to determine yield strength of the infiltration alloy. Yield strength was determined using a 0.002mm displacement offset from the linear elastic …

Rotating Beam Fatigue Of Forged 2219-T852 Aluminum Alloy, Julio Escamilla, Madison Reed

Materials Engineering

2219 aluminum has been used extensively in aerospace applications due to its ability to retain strength in large section thicknesses, thus making it ideal for large forgings. However, the Metallic Materials Properties Development and Standardization (MMPDS) handbook, a source of design data for aerospace industry applications, lacks information on 2219 in the T852 condition, particularly concerning the behavior of the alloy under cyclic loading conditions. Data was collected for forgings of 2219-T852 aluminum as produced by Weber Metals to determine the fatigue life of the alloy-temper combination and to assess the effects of forge thickness and orientation on fatigue life. …

Cisco Nexus 9200 Robustness Redesign, Colin Berge, Ethan Gold, Cole Christopherson, Rahul Makhijani

Industrial and Manufacturing Engineering

Certain configurations of Cisco's Nexus 9200 product experienced issues with bending during shipping. Two solutions were developed to eliminate this problem: an external brace that could quickly address the problem yet was expensive and unsustainable, and a redesigned chassis, which was more economical but came with a longer time to implement. Real world packaging and shipping conditions were simulated in SolidWorks and Finite Element Analysis was used to model the stresses experienced when the product is dropped. Both designs were found to significantly reduce stress in critical areas, thus reducing the chance of failure and the cost of the problem. …

An Investigation Of The Anomalous Thrust Capabilities Of The Electromagnetic Drive, Hannah J. Simons

Physics

The Electromagnetic Drive (EMDrive) is a propellant-less engine concept hypothesized by aero- space engineer Roger Shawyer. Shawyer’s proposed thruster technology is grounded on the theory of electromagnetic resonant behavior exhibited by a radiofrequency cavity, though the source of any generated thrust is undetermined by current physical laws. NASA Eagleworks Laboratories at John- son Space Center conducted a vacuum test campaign to investigate previously reported anomalous thrust capabilities of such a closed radiofrequency cavity, using a low-thrust torsion pendulum. The team published positive, although small-scaled thrust results in 2017. Following NASA Eagleworks breakthrough result and operating under the assumption that the …

Weight Controlled Electric Skateboard, Zachary Barram, Carson Bertozzi, Vishnu Dodballapur

Computer Engineering

Technology and the way that humans interact is becoming more vital and omnipresent with every passing day. However, human interface device designers suffer from the increasingly popular “designed for me or people like me” syndrome. This design philosophy inherently limits accessibility and usability of technology to those like the designer. This places severe limits of usability to those who are not fully able as well as leaves non-traditional human interface devices unexplored. This project set out to explore a previously uncharted human interface device, on an electric skateboard, and compare it send user experience with industry leading human interface devices.

Assessing The Growth In Entrepreneurial Mind-Set Acquired Through Curricular And Extra-Curricular Components, Cheryl Q. Li, Ronald S. Harichandran, Nadiye O. Erdil, Maria-Isabel Carnasciali, Jean Nocito-Gobel

Engineering and Applied Science Education Faculty Publications

In an effort to develop an entrepreneurial mindset in our engineering students, the University of New Haven has adopted both curricular and extra-curricular approaches. The curricular components include: 1. Several e-Learning modules covering specific entrepreneurial concepts integrated into the regular engineering and computer science curricula. Available online, each module contains readings, short videos, and self-assessment exercises. Students complete these self-paced modules outside of the classroom over a two-week period. Instructors normally engage students on the content of the module through online or in-class discussions and in-class contextual activities. 2. An elective course on business principles and entrepreneurship that incorporates four …

”Cyberworld” As A Theme For A University-Wide First-Year Common Course, Kristen Przyborski, Frank Breitinger, Lauren Beck, Ronald S. Harichandran

Engineering and Applied Science Education Faculty Publications

Nowadays we all live in a cyber world and use the internet for emailing, banking, streaming video, shopping, reading news, or other activities. Given all the time people spend online, it is important that all students (regardless of their major) learn some basics about living in a cyber world, e.g., strategies for online safety, impact of artificial intelligence, digital forensics or ancestry.com. To facilitate students from many majors to learn about important issues related to the internet, eight faculty from a variety of disciplines at the University of New Haven integrated the theme of Cyber World into our team-taught, first-year …

An Exploratory Study Of Engineering Students’ Misconceptions About Technical Communication, Cheryl Q. Li, Judy Randi, Jenna Sheffield

Engineering and Applied Science Education Faculty Publications

This paper reports results of a mixed methods study that examined engineering students’ acquisition of technical communication skills over time. In particular, this exploratory study aimed to identify persistent errors, lingering misconceptions, and challenges engineering students faced when they attempted to apply their knowledge and skills in new contexts. The 12 participants were drawn from engineering courses in which students were required to compose technical memoranda in response to requests for information from supervisors or clients. This integrated approach addresses content and communication in the same course. The study included a longitudinal analysis of four technical memoranda written across two …

Assessing An Online Engineering Ethics Module From Experiential Learning Perspective, Gokhan Egilmez, Philip Viscomi, Maria-Isabel Carnasciali

Engineering and Applied Science Education Faculty Publications

Today, engineers play a crucial role in the direction of technology, research, social wellbeing, and economic growth, thus the lives of people. An engineer’s professional responsibility for complying with ethical standards and conduct is essential to the needs and requirements of individuals, organizations, and the society. Educating the future engineering workforce and establishing effective and timely policies that ensure engineering professional’s compliance with requirements are two important pillars of sustaining the ethical knowledge and practice in engineering profession. In this study, the researchers focused on investigating the learning effectiveness of an online ethics module developed for and implemented in a …

Eml Indices To Assess Student Learning Through Integrated E-Learning Modules, Ronald S. Harichandran, Nadiye O. Erdil, Maria-Isabel Carnasciali, Cheryl Q. Li, Aadityasinh Rana

Engineering and Applied Science Education Faculty Publications

The University of New Haven has facilitated the development and integration of e-learning modules on entrepreneurial topics into regular engineering and computer science courses. In addition to faculty at the University of New Haven, over three years 77 faculty at 53 other universities in the US have also integrated these modules into their courses. Starting in fall 2017, rubrics were developed so that student work related to topics covered in the modules could be assessed directly by instructors. Topics covered by each module were also mapped to learning outcomes published in the KEEN Framework [1]. An Entrepreneurial Minded Learning (EML) …

Motivating Students For Learning Using Scaffolding And A Variety Of Assignments, Nadiye O. Erdil

Engineering and Applied Science Education Faculty Publications

This paper discusses the impacts of various course assignments and activities that were used to increase student motivation and learning. The courses selected for the study are Quality Analysis and Design of Experiments courses, which are offered as required courses in the industrial engineering graduate program at the University of New Haven. The assignments and activities include term project, term paper, homework, in-class exercises, quizzes, exams, library training and factory visit. In an earlier pilot study in the Quality Analysis course, scaffolding -an instructional strategy that enables students to build on prior experience and knowledge as they work towards mastering …

Fire Protection System Analysis Of Warren J. Baker Center Of Science And Mathematics, Jacob Dentici

Fire Protection Engineering: Culminating Experience Project Reports

This report analyzes the different fire protection systems and features of the Warren J. Baker Center for Science and Mathematics at the California Polytechnic State University, San Luis Obispo campus. This building is used for lectures, laboratories, study spaces, faculty spaces, and storage spaces for the students and faculty at the Cal Poly campus. Typically, there are science and math courses taught within this building. The building is a 6-story structure, that is not classified as a high-rise due to the location of fire department access and has a five-story atrium located on levels 2 through 6. There are two …

Effects Of Glycation On Blood Protein Interactions With Nanomaterials: A Biophysical And Cytotoxicity Study, Karl Baumgartner, Madeline Eiken

Bioengineering Senior Theses

When engineered nanoparticles (NPs) enter into a biological system, the proteins and biomolecules in the system adsorb to the NP surface to form a “protein corona” (PC). The PC greatly influences NP transformations, biological interactions, and cell response. Further complicating the development of NPs for biomedical applications, disease states alter the population of proteins and changes the biophysical features of individual proteins through posttranslational modifications. Here-in, we aim to understand how glycation of the PC, as in uncontrolled diabetes, alters the NP-PC interaction and toxicity by conducting biochemistry and cell toxicity experiments. We focus upon 40 and 80 nm citrate-coated …

Microfluidic Chip For High Efficiency Microinjection Of Caenorhabditis Elegans, Delaney Gray, Alex Hadsell, Jessica Talamantes

Bioengineering Senior Theses

The terrestrial nematode, Caenorhabditis elegans, is an invaluable model organism for the study of molecular and cellular processes due to their small size, rapid generation time, easy cultivation, and invariant cell number. Additionally, 40% of genes known to be associated with human disease have clear orthologs in the C. elegans genome. In C. elegans genetics research, microinjection of genetic material into the worms is critical. Although an established technique, manual microinjection is tedious, low-throughput, and requires an expert researcher. This thesis details a novel microfluidic device designed to perform high-throughput microinjection. This two-layer, PDMS-based chip integrates microfluidic elements to …

Effects Of Heat Treatment On The Dimensional Stability And Mechanical Properties Of Guadua Bamboo, Kade Schmitz, Skye Dascher, Shalto Dascher

Materials Engineering

Contributing to about 4% of particulate emissions, the construction industry is one of the largest polluters of the environment. In an effort to reduce emissions, BamCore has produced a dual panel wall system made of Guadua bamboo with a Douglas fir veneer. Bamboo is a highly renewable material with a fast growth rate and carbon sequestration abilities. This project investigates how heat treating Guadua bamboo influences its dimensional changes and mechanical properties for building applications. It was found that a dimensional increase in every direction occurred for all samples when exposed to higher relative humidity (50% to 90%), and that …

Gaslamp Hotel-Fire Protection/Life Safety Analysis, Garner A. Palenske

Fire Protection Engineering: Culminating Experience Project Reports

The Gaslamp Hotel was analyzed for fire protection/life safety using two different methodologies; a prescriptive approach and a performance-based approach. Both considered the same features of the building. The prescriptive analyses studied the variation of the building’s fire protection/life safety components from those required by the applicable codes and standards. This included building construction, fire resistance, fire suppression, fire detection, smoke control system, and egress systems. The results of the analysis indicate that the building complies with the requirements of the applicable codes and standards, with three exceptions relating to occupant egress: 1) The first-floor bar area: One exit is …

Silverton Timeshare Tower “The Berkley”, Kevin Murphy

Fire Protection Engineering: Culminating Experience Project Reports

The Berkley (aka the Silverton Timeshare Tower) was reviewed for compliance with the code of record. This included review of the full architectural set of drawings, as well as the available Fire Protection Report and Amendments that were issued prior to and during construction. This analysis has been slowly performed throughout the extent of my graduate career at California Polytechnic State University, San Luis Obispo (Cal Poly), and has been in depth for each applicable area of study. Each of the studies performed will be reviewed in the applicable sections below, be it for prescriptive analysis of the existing facility …

Cal Poly State University Robert E. Kennedy Library Fire Protection Analysis Report, Timothy Anderson

Fire Protection Engineering: Culminating Experience Project Reports

This report determines whether or not the fire protection and life safety features of Robert E. Kennedy Library are consistent with the fire protection objectives established in nationally recognized fire protection codes and standards. This analysis is performed to establish a technical baseline for identification of fire protection deficiencies.

Kennedy Library is the campus student library at California Polytechnic State University. The facility provides resources and services in a variety of media to meet the needs of university students and faculty.

This analysis consists of a prescriptive analysis and a performance-based analysis. The prescriptive analysis is an analysis of the …

Building V: Fire And Life Safety Analysis, Andrew Ko

Fire Protection Engineering: Culminating Experience Project Reports

A fire and life safety analysis was completed for Building V as part of a culminating project in the California Polytechnic State University at San Luis Obispo Fire Protection Engineering Master’s Degree Program. This report will detail both a prescriptive design based on the 2013 California Building Code and applicable standards as well as a performance based analysis based on a design fire scenario.

The prescriptive design will discuss four main components of compliance: 1) Structural Fire Protection, 2) Fire Alarm, 3) Fire Sprinkler, and 4) Means of Egress. Structural fire protection analysis is separated into four parts: type of …

Fire Protection Engineering Final Report: Baylor Scott & White Medical Center, College Town, Tx, Jonathan Lo

Fire Protection Engineering: Culminating Experience Project Reports

This report examines the Baylor, Scott & White Medical Center in College Station, TX. This hospital is a 324,070 square feet midrise building of Type I-A construction and Group I-2 occupancy, with a basement and five above-grade floors. Publicly-available, simplified floor plans were obtained from the internet, and a prescriptive- and performance-based analysis was formed around these plans. It should be noted that these online plans may not contain all information and details in that are found in architectural plans, and that assumptions were made in order to ‘fill in the gaps’ and proceed with this report. For example, on …

Atx Storage: Fire And Life Safety Analysis, Perla Salcedo

Fire Protection Engineering: Culminating Experience Project Reports

The following report is a fire and hazard protection analysis of a new building. This new building is a self-storage building called ATX Storage locate in Austin, TX. The prescriptive requirements set by the codes and standards used at time of construction of the building have been met. The building has been properly classified with respect to occupancy as S1, Group B and R-3 and construction type II A Sprinklered. Appropriate design for interior partitions and exterior wall have been identified. Interior finish requirements have been analyzed for a better understanding of aesthetics guidelines. Based on the sprinkler drawing calculations, …

The Spheres, Justin Milne

Fire Protection Engineering: Culminating Experience Project Reports

The Spheres, an architectural masterpiece surrounded by a high-rise building complex, is in the heart of South Lake Union in Seattle, Washington. The Spheres building pushes limitations in building design on all levels. With hexecontahedron panels tessellated over the façade of its three spherical glass glaze greenhouse globes, the design affords futuristic personality, alongside energy efficacy while sustaining life within the building. While building innovations within The Spheres are certainly notable within all disciplines of Architecture, Engineering, and Construction, the contents of this report refer to fire protection engineering and code consulting elements.

In meeting The Spheres' required fire safety …

A Fire Protection Analysis Of Kipp Academy Of Opportunity, Shahrzad Alaei

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of this report is to analyze and assess the life safety and fire protections systems of the KIPP Academy of Opportunity (KAO) charter school located in South Los Angeles. KAO is a 3-story building with a total area of 27,429 ft2 that was originally built in 2003 to serve 400 students.

Two separate fire and life safety assessments were performed in this project to ensure the building meets the requirements by the building code and fire safety standards. The prescriptive based analysis includes assessment of structural design, construction materials, egress design, fire alarm, communication system, fire suppression system, …