Engineering Commons^™

Sparsity Constrained Regression For High-Speed Signal Integrity Modeling, Jiacheng Zhuo, Jiayi He, Zurab Kiguradze, Bhyrav Mutnury, James Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

High-speed signal integrity (SI) modeling usually involves modeling non-linear subsystems. Traditional approaches like response surface modeling (RSM), artificial neural networks (ANN) and support vector machine (SVM) suffer from two major issues. Either they don't scale well when the number of dimensions or variables increase in the non-linear model, or they are sensitive to the initial training data used to create the models. For example: RSM approach requires large design of experiments (DoE) when the number of variables increase. With ANN, the designer has to spend a lot of time tuning or optimizing the hyperparameters. In this paper, a new approach …

Neutron Detection Performance Of Gallium Nitride Based Semiconductors, Chuanle Zhou, Andrew G. Melton, Eric Burgett, Nolan Hertel, Ian T. Ferguson

Electrical and Computer Engineering Faculty Research & Creative Works

Neutron detection is crucial for particle physics experiments, nuclear power, space and international security. Solid state neutron detectors are of great interest due to their superior mechanical robustness, smaller size and lower voltage operation compared to gas detectors. Gallium nitride (GaN), a mature wide bandgap optoelectronic and electronic semiconductor, is attracting research interest for neutron detection due to its radiation hardness and thermal stability. This work investigated thermal neutron scintillation detectors composed of GaN thin films with and without conversion layers or rare-earth doping. Intrinsic GaN-based neutron scintillators are demonstrated via the intrinsic 14N(n, p) reaction, which has a small …

Bayesian Optimization For High-Speed Channel Equalization, Zurab Kiguradze, Nana Dikhaminjia, Mikheil Tsiklauri, Jiayi He, Bhyrav Mutnury, Arun Chada, James Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Equalization methods are used to recover the signal attenuated by channel loss. Different optimization algorithms are applied to find the best tap coefficients for each equalization that will improve eye opening and reduce bit error rate. The goal function for most equalization optimization algorithms is to reduce the difference between input and output signals, which is a linear optimization problem and can be solved relatively easily. This indirectly will increase eye height and improve eye diagram. Directly optimizing eye height is a non-linear problem and cannot be solved with analytical method. We are proposing FFE and DFE combined equalization optimization …

Strain-Stress Study Of Alxga1−Xn/Ain Heterostructures On C-Plane Sapphire And Related Optical Properties, Yining Feng, Vishal Saravade, Ting Fung Chung, Yongqi Dong, Hua Zhou, Bahadir Kucukgok, Ian T. Ferguson, Na Lu

Electrical and Computer Engineering Faculty Research & Creative Works

This work presents a systematic study of stress and strain of AlxGa_1−xN/AlN with composition ranging from GaN to AlN, grown on a c-plane sapphire by metal-organic chemical vapor deposition, using synchrotron radiation high-resolution X-ray diffraction and reciprocal space mapping. The c-plane of the AlxGa_1−xN epitaxial layers exhibits compressive strain, while the a-plane exhibits tensile strain. The biaxial stress and strain are found to increase with increasing Al composition, although the lattice mismatch between the AlxGa1−xN and the buffer layer AlN gets smaller. A reduction in the lateral coherence lengths and an increase in the edge and …

A Characterization Of Different Alkali Chemical Agents For Alkaline Flooding Enhanced Oil Recovery Operations: An Experimental Investigation, Sherif Fakher, Hesham Abdelaal, Youssef Elgahawy, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alkaline injection is a chemical enhanced oil recovery method that is used to increase oil recovery by reacting with the crude oil and creating an in situ surfactant. Many chemical agents can be used as an alkali during injection all of which have several advantages and disadvantages. This research focuses on the innate properties of three alkali agents and their ability to alter pH and temperature downhole. Alkali solutions were prepared with five different concentrations including 0.2, 1, 2, 3, and 4 wt%. The impact of varying the alkali concentration, monovalent cations manifested in sodium chloride, and divalent cations manifested …

Synthesis And Applications Of Hematite Α-Fe2o3 : A Review, Muhamad Muhajir, Poppy Puspitasari, Jeefferie Abdul Razak

Journal of Mechanical Engineering Science and Technology (JMEST)

This article reviewed the hematite α-Fe2O3. It focuses on its material properties, nanostructures, synthesis techniques, and its numerous applications. Researchers prepared the hematite nanostructure using the synthesis methods such as hydrothermal, and, further, enhanced it by improving the techniques to accommodate the best performance for specific applications and to explore new applications of hematite in humidity sensing.

Failure Analysis On Titen Proto-Xx Car Chassis, Gaguk Jatisukamto, Rika Dwi Hidayatul Qoryah, Santoso Mulyadi

Journal of Mechanical Engineering Science and Technology (JMEST)

The car chassis as a skeleton supports all loads and is the most important component. Car chassis requirements must be rigid, twisting resistant, vibration resistant and resistant to fatigue. This study aims to find the cause of the failure of the Titen Proto-XX car chassis connection. The research methodology was conducted by testing the composition of materials and structural analysis using Ansys Workbench Release 15.0 software. The conclusion of the research is that the skeletal structure material uses Aluminum AA series 1XXX with Al content greater than 99.5%, the welding ability is low, causing a failure in the welded joint. …

The Effect Of Chlorophyll Concentration From Papaya Leaves On The Performance Of Dye-Sensitized Solar Cell, Dede Rizali, Heru Suryanto, Sukarni Sukarni

Journal of Mechanical Engineering Science and Technology (JMEST)

Dye-Sensitized Solar Cell (DSSC) is the third generation solar cell that has sandwich structure consisted of organic dye material and other components such as titanium dioxide (TiO2) semiconductor, electrolyte, and substrates (counter electrode and working electrode). The dye in the device was made from green plant chlorophyll such as papaya. This research aimed to find the influence of dye concentration from papaya leaves chlorophyll on the performance of DSCC. The discussion covered the output power (Pout), Fill Factor (FF), and efficiency (ɳ). The method in this research was explorative experimental with independent variables such as direct and indirect sunlight. The …

The Flame Characteristics Of Diesel Fuel Blend With Kepuh (Sterculia Foetida) Biodiesel, Dani Hari Tunggal Prasetiyo, Nasrul Ilminnafik, Salahuddin Junus

Journal of Mechanical Engineering Science and Technology (JMEST)

Kepuh biodiesel fuel (sterculia foetida) is an alternative fuel that can be used to replace fossil fuel. Diesel fuel is performed to determine the laminar burning velocity and high flame by adding biodiesel kepuh volume of 10%, 20%, 30%. The purpose of this study was to study the effect of biodiesel and the effect of bunsen burners on the laminar burning velocity and flame height. Bunsen burner is made of copper and stainless steel. Testing of flame characteristics was carried out by heating the mixture of fuel and air at a temperature of 200°C. The purpose of heating the air …

Critical Solid Fraction Point Analysis: Case Study On Cement Mill Machine Diaphragm, Mochamad Achyarsyah, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

During the solidification process, metal liquids turn into solid geometry units including the riser and gating system. The disruption in the liquid flow often causes shrinkage in the object. Critical Solid Fraction Point is a critical point where the continuous liquid supply turned solid and unable to pour to some sections. Simulation software can predict the critical solid fraction time of an object and the liquid supply behavior. The simulation helps the designer in the casting design. The application of low steel alloys in the cement industry, e.g., the Diaphragm, needs development to minimize the shrinkage. This research aimed to …

Characteristic Analysis Of Horizontal Axis Wind Turbine Using Airfoil Naca 4712, Bili Darnanto Susilo, Gaguk Jatisukamto, Nurkoyim Kustanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Wind energy has been developed and used as a source of electrical energy by converting wind energy into electrical energy using a generator. There are some wind turbine parameters that important for wind turbines design and model, includes the size of the rotor radius, airfoil selection, chord length, and pitch angle. The study aims to characterize the performance of a horizontal axis wind turbine using computational methods. The methods used a design and simulation of NACA 4412 and NACA 4712 airfoil using QBlade software using wind conditions in the region of Pancer, Jember. Results show that the maximum Cl value …

Microwave Tunneling And Robust Information Transfer Based On Parity-Time-Symmetric Absorber-Emitter Pairs, Zhicheng Xiao, Younes Ra’Di, Sergei Tretyakov, Andrea Alù

Advanced Science Research Center

Robust signal transfer in the form of electromagnetic waves is of fundamental importance in modern technology, yet its operation is often challenged by unwanted modifications of the channel connecting transmitter and receiver. Parity-time- (PT-) symmetric systems, combining active and passive elements in a balanced form, provide an interesting route in this context. Here, we demonstrate a PT-symmetric microwave system operating in the extreme case in which the channel is shorted through a small reactance, which acts as a nearly impenetrable obstacle, and it is therefore expected to induce large reflections and poor transmission. After placing a gain element behind the …

Deep Brain Stimulation: Prediction Model For Volume Of Tissue Stimulated, Melissa Jones, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

An attempt has been made to understand deep brain stimulation in humans via marketable devices that are approved by the US Food and Drug Administration. The electrode characteristics were presented to influence the volume of tissue stimulated. Experimental data were digitized and VTS data were presented a function of electrode diameter, aspect ratio, applied current, pulse duration, voltage and frequency. Amongst other trends voltage and VTS were found to exhibit a three-stage relation, where Stage II characteristics were represented by a linear equation. It is in this stage, the VTS was found to be stable and where the most effective …

Experimental Characterization Of Thermal-Hydraulic Performance Of A Microchannel Heat Exchanger For Waste Heat Recovery, James Yih, Hailei Wang

Mechanical and Aerospace Engineering Faculty Publications

Given size and performance advantages, microchannel heat exchangers are becoming increasingly important for various energy recovery and conversion processes. In this study, detailed experimental measurements were conducted to characterize flow and heat transfer performance of a microchannel heat recovery unit (HRU) manufactured using standard photochemical etching and diffusion bonding processes. According to the global flow and temperature measurement, the HRU has delivered the predicted thermal performance under various oil and air flow rates. As expected, the heat transfer effectiveness varies between 88% and 98% for a given air and oil flow rates while it increases with air inlet temperature due …

Multi-Resonant Feedback Control Of Multiple Degree-Of-Freedom Wave Energy Converters, Ossama Abdelkhalik, Shangyan Zou, Rush D. Robinett Iii, David G. Wilson, Giorgio Bacelli, Ryan G. Coe, Umesh Korde

Michigan Tech Patents

Multi-resonant control of a 3 degree-of-freedom (heave-pitch-surge) wave energy converter enables energy capture that can be in the order of three times the energy capture of a heave-only wave energy converter. The invention uses a time domain feedback control strategy that is optimal based on the criteria of complex conjugate control. The multi-resonant control can also be used to shift the harvested energy from one of the coupled modes to another, enabling the elimination of one of the actuators otherwise required in a 3 degree-of-freedom wave energy converter. This feedback control strategy does not require wave prediction; it only requires …

Gamma-Ray Radiation Effects In Graphene-Based Transistors With H-Bn Nanometer Film Substrates, E. J. Cazalas, Michael R. Hogsed, S. R. Vangala, Michael R. Snure, John W. Mcclory

Faculty Publications

Radiation effects on graphene field effect transistors (GFETs) with hexagonal boron nitride (h-BN) thin film substrates are investigated using 60Co gamma-ray radiation. This study examines the radiation response using many samples with varying h-BN film thicknesses (1.6 and 20 nm thickness) and graphene channel lengths (5 and 10 μm). These samples were exposed to a total ionizing dose of approximately 1 Mrad(Si). I-V measurements were taken at fixed time intervals between irradiations and postirradiation. Dirac point voltage and current are extracted from the I-V measurements, as well as mobility, Dirac voltage hysteresis, and the total number of GFETs that remain …

Tracking Lysosome Migration Within Chinese Hamster Ovary (Cho) Cells Following Exposure To Nanosecond Pulsed Electric Fields, Gary L. Thompson Iii, Hope T. Beier, Bennett L. Ibey

Henry M. Rowan College of Engineering Departmental Research

Above a threshold electric field strength, 600 ns-duration pulsed electric field (nsPEF) exposure substantially porates and permeabilizes cellular plasma membranes in aqueous solution to many small ions. Repetitive exposures increase permeabilization to calcium ions (Ca²⁺) in a dosage-dependent manner. Such exposure conditions can create relatively long-lived pores that reseal after passive lateral diffusion of lipids should have closed the pores. One explanation for eventual pore resealing is active membrane repair, and an ubiquitous repair mechanism in mammalian cells is lysosome exocytosis. A previous study shows that intracellular lysosome movement halts upon a 16.2 kV/cm, 600-ns PEF exposure of …

Demonstration Of A Quasi-Cw Diode-Pumped Metastable Xenon Laser, Carl R. Sanderson, Charles W. Ballmann, Jiande Han, Amanda B. Clark, Brett H. Hokr, Kunning G. Xu, Michael C. Heaven

PRC-Affiliated Research

In this work, we present the first demonstration of a quasi-continuous-wave diode-pumped metastable xenon laser at atmospheric pressures. Lasing in metastable noble gas species has received increased attention in the last few years as a possible high-power laser source. This demonstration shows that metastable xenon has a sufficiently broad absorption spectrum to be pumped with a broad-bandwidth diode laser. This implies that a high-power metastable xenon gas laser should be achievable using high-power pump diodes.

Towards Completely Automated Glycan Synthesis, Matteo Panza

Dissertations

Carbohydrates are ubiquitous both in nature as biologically active compounds and in medicine as pharmaceuticals. Although there has been continued interest in the synthesis of carbohydrates, chemical methods require specialized knowledge and hence remain cumbersome. The need for development of rapid, efficient and operationally simple procedures has come to the fore. This dissertation focuses on the development of a fully automated platform that will enable both experts and non-specialists to perform the synthesis of glycans. Existing automated methods for the synthesis of oligosaccharides are highly sophisticated, operationally complex, and require significant user know-how. By contrast, high performance liquid chromatography (HPLC) …

Demonstration Of A Quasi-Cw Diode-Pumped Metastable Xenon Laser, Carl R. Sanderson, Charles W. Ballmann, Jiande Han, Amanda B. Clark, Brett H. Hokr, Kunning G. Xu, Michael C. Heaven

PRC-Affiliated Research

In this work, we present the first demonstration of a quasi-continuous-wave diode-pumped metastable xenon laser at atmospheric pressures. Lasing in metastable noble gas species has received increased attention in the last few years as a possible high-power laser source. This demonstration shows that metastable xenon has a sufficiently broad absorption spectrum to be pumped with a broad-bandwidth diode laser. This implies that a high-power metastable xenon gas laser should be achievable using high-power pump diodes.

Demonstration Of A Quasi-Cw Diode-Pumped Metastable Xenon Laser, Carl R. Sanderson, Charles W. Ballmann, Jiande Han, Amanda B. Clark, Brett H. Hokr, Kunning G. Xu, Michael C. Heaven

PRC-Affiliated Research

In this work, we present the first demonstration of a quasi-continuous-wave diode-pumped metastable xenon laser at atmospheric pressures. Lasing in metastable noble gas species has received increased attention in the last few years as a possible high-power laser source. This demonstration shows that metastable xenon has a sufficiently broad absorption spectrum to be pumped with a broad-bandwidth diode laser. This implies that a high-power metastable xenon gas laser should be achievable using high-power pump diodes.

Additively Manufactured Continuous Carbon Fiber Thermoplastic Composites For High-Performance Applications, Nekoda Van De Werken

Mechanical Engineering ETDs

The goal of this dissertation is to provide a foundation for the advancement of additive manufacturing (AM) toward production of high-performance carbon fiber reinforced polymer matrix composites (CFRPs). AM can provide valuable advantages over conventional composite manufacturing techniques, including the control over fiber orientation, capability of manufacturing complex geometries, out-of-autoclave processing, elimination of the need for composite tooling, and the ability to perform lights-out manufacturing. Currently, however, a suite of challenges related to modelling, design, manufacturing defects, and general limitations in the current understanding of the processing-structure-property relationships exist in AM of composites. To this end, this dissertation investigates novel …

Robot Simulation Analysis, Jacob Miller, Jeremy Evert

Student Research

• Simulate virtual robot for test and analysis

• Analyze SLAM solutions using ROS

• Assemble a functional Turtlebot

• Emphasize projects related to current research trajectories for NASA, and general robotics applications

The Catch Partner, Tyler Marr, Cindi Albrightson

Student Research

When improving a skill, the process should be as efficient as possible. Football leagues across the world have the issue when throwing without a partner, quarterbacks must use a net to catch the ball. This demands a process of throw the ball, retrieve the ball, walk back away from the net, and repeat. The time wasted in this process greatly reduces the number of throws made. Players also currently have no means of practicing catching the football without the help of another person. A football net with a passing machine would solve the issue of time and energy being wasted …

Smart Sip, Ethan Owens, Cindi Albrightson

Student Research

The consumption of alcohol has many effects on people, both directly and indirectly. Its no question that when most adults get together for a good time, alcohol will be involved one way or another. However, the over consumption of alcohol can lead to some of the scariest and sometimes fatal results. There are too many people that lose their lives due to drunk driving accidents, or alcohol poisoning each year. No matter how terrifying the risks are of over consuming alcohol, people are still going to go out and take their chances. But what if there were a way to …

Protective Windshield Cover, Kathryn Mcdowell, Cindi Albrightson

Student Research

A broken or cracked windshield caused by debus from strong winds and hailstorms are very common. The goal with this protective windshield cover is that the customer wouldn’t have to worry about having to replace or repair their windshield after a severe storm. It is made out of Nitrile rubber (NBR) foam, which is commonly used in yoga mats; it is very flexible and light weight. Replacing a windshield can be pretty expensive and a hassle. With this product it would make sure they had one less thing to worry about when the storms blow through.

Automatic Landing Gear, Daniel Battles, Cindi Albrightson

Student Research

Airplanes that are equipped with retractable landing gear are typically more desirable by pilots because of the benefits that come from this. There are also cons to having retractable landing gear, and having to remember to retract or extend the gear is one example. A switch on the dashboard must be flipped in order to activate the gear at the right time. In the incident that an airplane lands without the landing gear down, this is referred to as a “Gear up landing”. Gear up landings are usually caused from pilot error, which in many cases means that the pilot …

Optical Angular Scatterometry: In-Line Approach For Roll-2-Roll And Nano-Imprint Fabrication Systems, Juan Jose Faria-Briceno

Electrical and Computer Engineering ETDs

As critical dimensions continue to shrink and structures become more complex, metrology processes are challenging to implement during in-line nanomanufacturing. Non-destructive, non-contact, and high-speed conditions are required to achieve proper metrology processes during in-line manufacturing. Optical scatterometry is a nanoscale metrology tool widely used in integrated circuit manufacturing for characterization and quality control. However, most applications of optical scatterometry operate off-line. A high-speed, in-line, non-contact, non-destructive scatterometry angular system has been demonstrated in this work to scan pattern surfaces during real-time nano-fabrication.

Our system has demonstrated scanning capabilities using flat, 1D and 2D complex structures. The flat surface samples consist …

Viral Surrogates In Potable Reuse Applications: Evaluation Of A Membrane Bioreactor And Full Advanced Treatment, Katerina Papp, Duane Moser, Daniel Gerrity

Civil and Environmental Engineering and Construction Faculty Research

This study employed quantitative polymerase chain reaction (qPCR) to evaluate the occurrence and removal of five microbial surrogates at two water reuse facilities. The surrogates were (1) the 16S rRNA gene; (2) the AllBac assay for Bacteroides; (3) the Bacteroides bacteriophage ϕB124-14ϕB124-14; (4) the Bacteroides bacteriophage ϕcrAssphage; and (5) the pepper mild mottle virus (PMMoV). Log removal values (LRVs) were quantified for a membrane bioreactor (MBR) and across a full advanced treatment (FAT) train. PMMoV, ϕB124-14ϕB124-14, and ϕcrAssphageϕcrAssphage were detected in the MBR feed at concentrations of approximately 103 gene copies(gc)/mL103 gene⁢ copies(gc)/mL, 105 gc/mL105 gc/mL, and 106 gc/mL106 gc/mL, …

Voting Booths And Interactive Art Installations: The Diebold Accuvote Ts In Context, Mike Richison

Journal of Network Music and Arts

In 2016, I created an interactive installation called Video Voto Matic. This project was a mashup between the Votomatic voting system and a Roland TR-808 drum machine. To coincide with the 2020 election season, I am currently working on an update of the project that will include a touch screen voting interface and multiple networked stations that also produce audio and video output. The interface will be housed in the same voting booths that once housed the Diebold Accuvote TS. The Diebold Accuvote TS is a screen-based voting machine that does not utilize paper as a backup. Researchers have examined …