Engineering Commons^™

Coalescence Speed Of Two Equal-Sized Nanobubbles, Eric Bird, Jun Zhou, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In This Work, We Use Molecular Dynamics (MD) Simulations Coupled with Continuum-Based Theoretical Analysis to Study the Coalescence Dynamics of Two Equal-Sized Nanobubbles (NBs). We First Derive a Governing Equation for the Evolution of the Capillary Bridge Radius between Two Coalescing NBs from the Axisymmetric Navier-Stokes Equation. to Verify the Prediction from the Governing Equation, We Carry Out MD Simulations of the Coalescence of Two NBs in a Lennard-Jones Fluid System and Directly Measure the Bridge Radius, Rb, as a Function of Time, T. by Varying the Bubble Diameter, We Change the NB Ohnesorge Number from 0.46 to 0.33. in …

Experimental Evaluation Of Square Ferrocement Panels Using Polypropylene Wire Mesh, N. Khurram, U. Akmal, M. Raza, A. Hameed, M. Irfan Ul Hassan

Mining Engineering Faculty Research & Creative Works

Ferrocement panels are thin section comprised of hydraulic mortar reinforced with steel wire mesh and are susceptible to micro cracks at service conditions. The moisture and rainwater may infiltrate through these cracks and cause the reduction in capacity due to the corrosion of steel wire mesh. In the present study, a polypropylene (PP) wire mesh has been used to overcome this problem. The main objective of the study is to investigate the punching shear and bending capacity of the ferrocement panels using PP wire mesh. Experimental tests conducted on 32 simply supported square slabs panels of 450x450 mm subjected to …

Space-Based Countermeasure For Hypersonic Glide Vehicle, Robert Joseph Fowler Iv

Mechanical & Aerospace Engineering Theses & Dissertations

The purpose of this thesis is to investigate the effectiveness of a space-based laser weapon system for countering a hypersonic glide vehicle. Hypersonic glide vehicles are an emerging type of weapon system which combine the range of ballistic missiles with the maneuverability of cruise missiles. These systems pose a unique threat to military assets not only for their expanded capabilities but also for the lack of an effective defensive countermeasure. Space-based laser weapon systems may offer a solution to this problem. The dynamics of a space-based laser system defending against a hypersonic glide vehicle are modeled first. The governing equations …

Using Interacting Multiple Model Filters To Indicate Program Risk, Amy Sunshine Smith-Carroll

Engineering Management & Systems Engineering Theses & Dissertations

Technology development has increased exponentially. Program managers are pushed to accelerate development. There are many resources available to program managers that enable acceleration, such as: additional resources in the form of funding, people and technology. There are also negative impacts to acceleration, such as: inclusion, inexperience program managers, and communication. This research seeks to identify the limit to which a program or project can be accelerated before the program manager begins to accept an unacceptable amount of pre-determined risk.

This research will utilize estimation algorithms used by sensor systems to estimate the current and future state of objects in space. …

Onboard Autonomous Controllability Assessment For Fixed Wing Suavs, Brian Edward Duvall

Mechanical & Aerospace Engineering Theses & Dissertations

Traditionally fixed-wing small Unmanned Arial Vehicles (sUAV) are flown while in direct line of sight with commands from a remote operator. However, this is changing with the increased popularity and ready availability of low-cost flight controllers. Flight controllers provide fixed-wing sUAVs with functions that either minimize or eliminate the need for a remote operator. Since the remote operator is no longer controlling the sUAV, it is impossible to determine if the fixed-wing sUAV has proper control authority. In this work, a controllability detection system was designed, built, and flight-tested using COTS hardware. The method features in-situ measurement and analysis of …

Cyber Defense Remediation In Energy Delivery Systems, Kamrul Hasan

Computational Modeling & Simulation Engineering Theses & Dissertations

The integration of Information Technology (IT) and Operational Technology (OT) in Cyber-Physical Systems (CPS) has resulted in increased efficiency and facilitated real-time information acquisition, processing, and decision making. However, the increase in automation technology and the use of the internet for connecting, remote controlling, and supervising systems and facilities has also increased the likelihood of cybersecurity threats that can impact safety of humans and property. There is a need to assess cybersecurity risks in the power grid, nuclear plants, chemical factories, etc. to gain insight into the likelihood of safety hazards. Quantitative cybersecurity risk assessment will lead to informed cyber …

Returning To Learn By Doing, Jeremiah W. Miller

Construction Management

The objective of my senior project was to help return the Cal Poly SLO Construction Management Department to their hands-on labs after the COVID-19 Pandemic forced all learning to go virtual. To return to hands-on labs, I needed to create a set of protocols that faculty and staff could use before, during, and after the labs to prevent the spread of COVID-19. These protocols needed to be simple enough that professors could use them every day and effective enough to make students feel safe to continue attending in person labs. If these protocols were to be accepted, they would need …

Optimal Collaborative Path Planning For Unmanned Surface Vehicles Carried By A Parent Boat Along A Planned Route, Ari Carisza Graha Prasetia, I-Lin Wang, Aldy Gunawan

Research Collection School Of Computing and Information Systems

In this paper, an effective mechanism using a fleet of unmanned surface vehicles (USVs) carried by a parent boat (PB) is proposed to complete search or scientific tasks over multiple target water areas within a shorter time . Specifically, multiple USVs can be launched from the PB to conduct such operations simultaneously, and each USV can return to the PB for battery recharging or swapping and data collection in order to continue missions in a more extended range. The PB itself follows a planned route with a flexible schedule taking into consideration locational constraints or collision avoidance in a real-world …

Application Of Autonomous Equipment In Heavy Civil Construction, Roman J. Ruffino

Construction Management

The prevalence of autonomous vehicles in our everyday lives is continually growing. Automobile manufacturers such as Tesla have made great strides in building a car that can safely navigate the world around it and respond to sudden changes. There is great potential in the heavy civil construction industry for equipment such as bulldozers, scrapers, and transport vehicles to add another level of safety and efficiency to the worksite. The goal of this research will be to determine whether a contractor would actually apply this technology, or if it isn’t practical for everyday use. This paper will examine the current state …

Virtual Recruiting: The Impact Of Virtual Interviews & Hiring Events On Construction Students, Abram G. Briones-Colman

Construction Management

Recruitment from college construction programs was drastically altered by not being allowed to gather in person in large groups for the majority of 2020. Companies could no longer recruit in person as they had at past college events, and instead connected and communicated with students virtually. The construction management department at California Polytechnic State University San Luis Obispo (Cal Poly), bridged this gap between recruiting companies and current students, at a virtual career fair using a collaborative hub built on Microsoft Teams. Data was gathered from students via a survey after attending this first departmental virtual fair, to measure impacts …

Online Platform For Construction Management Internship Reviews - Continued, Michael F. Dunne Iii

Construction Management

The purpose of this paper is to outline and explain the origin, process and outcome of my goal to create a website where Construction Management students have the capability to review their internships. The aim was to continue to progress Cal Poly alumna Erica Zetterquist’s senior project and her idea to create an online platform similar to “PolyRatings”, a website where Cal Poly students are able to review and rate their professors. This website is essentially the same thing as “Polyratings”, but for internships instead of professors, hoping to help students with their job search process. Based off a series …

Organize, Prepare, And Painting Project: Pismo Beach Lions - Club, Luis Badillo

Construction Management

This paper explains the management process and execution of a project based senior project painting for a nonprofit. The main aim of the project was to give back to a charity organization that offers their time and energy to support their local community. This project occurred during the COVID 19 pandemic, and appropriate safety protocols were used including in communicating with the club representatives. The Pismo Beach Lions Club building was weathered and in need of fresh paint. The original color logo of the Lions Club is blue and white and was preferred that the building remain the same colors. …

The Discipleship Home Pergola And Firepit Area, Andreas V. Rasmussen

Construction Management

This report illustrates the complete process of the implementation of an outdoor space consisting of a hardscaped firepit area covered by a pergola in the backyard of the Discipleship Home in Oceano, CA. This project was carried out by two construction management students, Andreas Rasmussen and Logan Smith. Logan Smith’s primary focus was the pergola while I was in charge of the hardscaping and natural gas firepit directly underneath the structure. The project was completed in December of 2020 with the use of quality materials purchased from local businesses and the help of local equipment rental store, Grover Tool & …

Users Background And Perception Of Robotic Demolition Equipment, Matthew Elston Jones

Construction Management

Robotic demolition equipment or demolition robots are robots that resemble excavators without the cab, that can be controlled by an operator at a safe distance. This equipment can access hazardous environments and provides versatility in the demolition methods possible. Robots have become a popular choice for contractors looking for a competitive advantage. Currently there is little research about the demolition robot market and how the industry views the technology. This research first seeks to answer background questions on the users and their experience with demolition robots. The research also answers perception questions such as the benefits, drawbacks, and reasons for …

Tensile Behavior Of Frp Anchors Made From Cfrp Ropes Epoxy-Bonded To Uncracked Concrete For Flexural Strengthening Of Rc Column, Yasir Saeed, Wisam Amer Aules, Franz N. Rad, Anis M. Raad

Civil and Environmental Engineering Faculty Publications and Presentations

One of the major problems with using fiber reinforced polymer (FRP) in strengthening reinforced concrete (RC) structures is FRP premature debonding. Anchoring FRP materials to concrete has become associated with most of the strengthening techniques. One of the anchoring techniques is using handmade anchors made from FRP materials. In previous studies, most FRP anchors were made from rolling pre-cut FRP sheets and had short embedment (mm) as they were used for flexural or shear strengthening of RC beams. In the present study, FRP anchors were made from carbon fiber reinforced polymer (CFRP) ropes and had long embedment to be used …

Assessing Observer Stations For Cislunar Space Domain Awareness, Michael S. Rosenof

Theses and Dissertations

With renewed worldwide interest in cislunar space, the need for reliable domain awareness in that extended region of space is clear. This investigation quantifies the suitability of several possible stations for observer satellites in cislunar space by calculating the specific irradiance each would observe as they track satellites in various realistic lunar free-return trajectories across a decade, using reflected sunlight. This investigation includes one class of free return trajectories for target satellites, eleven distinct observer stations, and three different metrics for comparing the effectiveness of each observer station or combination of observer stations for sensing targets using reflected sunlight. The …

Deep Learning-Based, Passive Fault Tolerant Control Facilitated By A Taxonomy Of Cyber-Attack Effects, Dean C. Wardell

Theses and Dissertations

In the interest of improving the resilience of cyber-physical control systems to better operate in the presence of various cyber-attacks and/or faults, this dissertation presents a novel controller design based on deep-learning networks. This research lays out a controller design that does not rely on fault or cyber-attack detection. Being passive, the controller’s routine operating process is to take in data from the various components of the physical system, holistically assess the state of the physical system using deep-learning networks and decide the subsequent round of commands from the controller. This use of deep-learning methods in passive fault tolerant control …

Electromagnetic Interference Estimation Via Conditional Neural Processing, Edgar E. Gomez

Theses and Dissertations

The goal of this thesis is to determine the efficacy of employing Machine Learning (ML) to solve Joint Urgent Operational Need (JUON) CC-0575, which aims to develop a Common Operating Picture (COP) of the Global Positioning System (GPS) Electromagnetic Interference (EMI) environment. With the growing popularity of Artificial Neural Networks (ANNs), ML solutions are quickly gaining traction in businesses, academia and government. This in turn allows for problem solutions that were previously inconceivable using the classical programming paradigm. This thesis proposes a method to develop a COP of the battlefield via ANN ingestion of multiple-source signals and sensors. We conduct …

Continuous Integration/Continuous Delivery Pipeline For Air Force Distributed Common Ground System (Af Dcgs), Carolyn W. Fuller

Theses and Dissertations

AF DCGS has a recognized need to improve speed of delivery for modification and sustainment of the weapon system. Given that the program office implemented a Continuous Integration/Continuous Delivery (CI/CD) process for the sole purpose of delivering capability to the field faster, there is a need to measure and report the pipeline throughput. This research conducts an independent evaluation of the newly implemented pipeline within AF DCGS’s existing integration and test laboratories. Actual project data from the agile development work environments is studied and hypothesis tests are conducted to substantiate that the CI/CD pipeline improved the speed of delivery. The …

Implementation Of Bluebeam To The Fundamentals Of Construction Management Course, Kirk Arena

Construction Management

This project based senior project was brought about by Paul Weber and Matty Reed and was originally intended to take the paper-based binders from the Fundamentals to Construction Management course and organize these binders in Bluebeam. Bluebeam is an industry standard for nearly all construction projects, and an early adoption of the software could allow students to familiarize themselves with a tool that they will use after college or during internships. After deliberating with Paul, we concluded that we could better educate students by creating exercises that allow students to learn the tools available in Bluebeam through interactions in the …

Reintroduction Of Skilled Trade Programs For High School Students, Cristian Ayala-Quirino

Construction Management

The curriculum that incorporated skilled trades has vanished from many high schools, and more students are encouraged to attend college instead of pursuing trades. People view construction labor positions as jobs instead of careers. The construction industry is facing a substantial labor shortage amongst skilled laborers throughout the whole industry. Not enough people know how beneficial a career in the construction labor force can be. If more people knew about these career opportunities, they might have a greater interest in pursuing a career as a skilled tradesperson. To comprehend students’ understanding of the construction industry and examine where we can …

Pre-Construction Documents For A Mobile Food Assembling & Distribution Station, Winnie He

Construction Management

On Christmas Eve of 2018, Jessica He Liu, a chef in Los Angeles opened her home to friends and family to volunteer and help assemble food boxes and personal hygiene products and distributed these goods out to those in need. What started off as a goal to spread kindness during the holidays, became a yearly traditional non-profit volunteering event for those families involved. In March 2020, the deadly COVID-19 pandemic took the world by surprise, causing a copious amount of social distancing guild lines to be formed and enforced. Although there was still a slight hope that the pandemic would …

Should Teamwork-Based Content Be Taught In The Cal Poly Construction Management Curriculum?, Matthew J. Sharman

Construction Management

At California Polytechnic State University, San Luis Obispo (Cal Poly), in the Construction Management (CM) curriculum, there is a lack of teamwork-based content. This content includes negotiation, conflict resolution, and fundamental skills for working collaboratively with others such as social-emotional intelligence, empathy, and communication. The nature of the Cal Poly CM Program is to teach students about the aspects of the construction process, however what is missed is teaching how to work effectively in teams. They fail to teach this because of the strict curriculum of focusing on learning objectives rather than teaching individuals how to be effective construction managers. …

An Analysis Of The Cost Impacts Experienced By Drywall Subcontractors During Covid-19, Brenden Schow

Construction Management

Covid-19 has presented issues in many forms for the drywall tenant improvement (TI) industry due to regulations and restrictions instilled in the Bay Area, California. This report details appropriate implementation of force majeure clause in contracts, stay-at-home orders with regard to construction and updated OSHA requirements. It then goes into analysis on cost impacts observed by various drywall companies operating in the Bay Area and how they are created and controlled. This analysis is supported by interviews conducted with representatives from six different drywall subcontractors who are involved in the estimating and bidding process. Interviews consisted of eight open ended …

Pismo Beach Lions Club Sidewalk Replacement, Ramon Hernandez Jr

Construction Management

The objective of this senior project was to provide a long lasting and safe sidewalk for all the people that attend the Lions Club for future events. The idea came to be after talking to Karen Walsh, and how many previous visitors had tripped and fallen from the uneven sidewalk. The sidewalk was originally poured over 30+ years ago, and it was time for a newly built pathway. The project involved creating an estimate, schedule and coordinating with the club to see the project all the way through. The new sidewalk is now built stronger than ever before and is …

Covid-19 Impact On Construction Companies And Responses To The Pandemic, Justin Kyle Reno

Construction Management

The end of 2019 and throughout 2020 brought along the COVID-19 pandemic which majorly impacted the construction industry. For construction work to continue through the pandemic, adjustments to procedures and protocols were made that satisfied city and state requirements to reduce the virus spread. Since the virus is deemed highly contagious it is much easier to contract than a common flu, making containment for any potential spread a high priority. Understanding different companies’ responses to the pandemic at the construction jobsite level provides opportunities to implement procedures to stop the spread of the virus. Using in-depth interviews, this paper examines …

Preconstruction Plan For Stairs At West Cerro Vista Apartments, Kian D. Kemp

Construction Management

Students at California Polytechnic University have created an unsafe dirt trail down a hillside west of the Cerro Vista Apartment Complex on the university’s campus. This heavily traveled trail is a shortcut to an existing pedestrian pathway which connects Village Drive to Poly Canyon Village, as well as the R-3 and R-4 parking structures. The use of this trail raises alarm for potential safety concerns for students using it, especially during winter months when the hillside becomes very slippery. This paper outlines the design and preconstruction plan for the West Cerro Vista Stair Project, which proposes replacing the current trail …

The Enduring Threats Of California Wildfires: How Construction Companies Must Adapt, Connor Welch

Construction Management

California wildfires are among the most pervasive and commonly occurring natural threats to the state. Especially considering the incremental increase in frequency and destruction of wildfires, there is a crucial need for modernized policies aimed at both preventative measures as well as viable responses. My project will analyze how the exponentially growing prominence of California wildfires has affected the landscape of the construction business, revealing the need for modernized protocols that could aid in prevention. These factors include the full scope of short and long term economic damages inflicted by wildfires, fluctuations in labor and material prices, and resulting disruptions …

Case Study: Effects Of Covid-19 On A Mid-Size San Francisco Commercial General Construction Company, Andrew G. Maxwell Jr

Construction Management

The Covid-19 pandemic has had an adverse effect on the commercial construction industry. New safety procedures and regulations set by local government and health officials have made it difficult for construction to proceed at the efficiency level it had prior to the pandemic. The San Francisco Bay Area was subject to strict protocols starting in March of 2020 that vastly limited the capability of construction companies to perform work. This case study looks into the ways in which a mid sized commercial general construction contractor from the San Francisco Bay Area was impacted by Covid-19 and the methods they used …

Electro-Optic Satellite Constellation Design Using Multi-Objective Genetic Algorithm, Yasin Tamer

Theses and Dissertations

Satellite constellation design is a complex, highly constrained, and multidisciplinary problem. Unless optimization tools are used, tradeoffs must be conducted at the subsystem level resulting in feasible, but not necessarily optimal, system designs. As satellite technology advances, new methods to optimize the system objectives are developed. This study is based on the development of a representative regional remote sensing constellation design. This thesis analyses the design process of an electrooptic satellite constellation with regional coverage considerations using system-level optimization tools. A multi objective genetic algorithm method is used to optimize the constellation design by utilizing MATLAB and STK integration. Cost, …