Engineering Commons^™

Growth And Characterization Of Semiconductor Materials And Devices For Extreme Environments Applications, Abbas Sabbar

Graduate Theses and Dissertations

Numerous industries require electronics to operate reliably in harsh environments, such as extreme high temperatures (HTs), low temperature (LT), radiation rich environments, multi-extreme, etc. This dissertation is focused on two harsh environments: HT and multi-extreme.

The first study is on HT optoelectronics for future high-density power module applications. In the power modules design, galvanic isolation is required to pass through the gate control signal, reject the transient noise, and break the ground loops. The optocoupler, which consists of a lighting emitting diode (LED) and photodetector (PD), is commonly used as the solution of galvanic isolation at room temperatures. There is …

Static And Dynamical Properties Of Multiferroics, Sayed Omid Sayedaghaee

Graduate Theses and Dissertations

Since the silicon industrial revolution in the 1950s, a lot of effort was dedicated to the research and development activities focused on material and solid-state sciences. As a result, several cutting-edge technologies are emerging including the applications of functional materials in the design and enhancement of novel devices such as sensors, highly capable data storage media, actuators, transducers, and several other types of electronic tools. In the last two decades, a class of functional materials known as multiferroics has captured significant attention because of providing a huge potential for new designs due to possessing multiple ferroic order parameters at the …

Understanding Radiation Resistance In Head And Neck Tumor Xenografts Using Diffuse Reflectance And Raman Spectroscopy, Sina Dadgar

Graduate Theses and Dissertations

Each year, 800,000 new patients are diagnosed with head and neck squamous cell carcinoma (HNSCC), a majority of whom are treated with a combination of daily fractions of radiation and weekly chemotherapy sessions for up to seven weeks. Current methods to evaluate treatment response of individual patients are limited to anatomical measurements of tumor burden using CT scan or MRI 4-8 weeks after completion of treatment. However, earlier knowledge of radiation-response prior to or at early days after commencement of therapy can aid oncologist with escalating and de-escalating treatment plans for exceptionally non-responding and responding patients. Such a knowledge can …

The Effects Of Solution Condition On Virus Filtration Performance, Fnu Namila

Graduate Theses and Dissertations

Virus filtration is an integral part of the downstream purification of mammalian cell culture-derived biotherapeutics to assure the viral safety of the products. Virus filtration membranes remove viruses based on a size-exclusion mechanism. Commercial parvovirus filers possess unique membrane structure and are designed to remove smaller non-enveloped parvoviruses with size 18-26 nm. However, some filters face issues, such as pre-mature fouling, the decline of filtrate flux, and reduction in virus retention. This doctoral dissertation focused on identifying the factors that influence the filtrate flux and the virus retention capability of commercial virus filters. The effects of solution pH and ionic …

An Impedimetric Aptasensing System For The Rapid Detection Of Salmonella Typhimurium, America Sotero

Graduate Theses and Dissertations

Salmonella Typhimurium is a foodborne pathogen associated with raw and undercooked eggs, poultry, beef, fruits, and vegetables. In the United States, Salmonella is responsible for approximately 1.2 million illnesses, 23,000 hospitalizations, and 450 deaths annually. For many years, conventional detection methods such as culture-dependent and PCR-based methods have been the “golden standards” for the detection of this pathogen due to their high sensitivity and reliability. However, they still have some disadvantages such as long enrichment steps and high costs that need to be overcome. The development of a rapid and reliable method for the detection of S. Typhimurium is needed …

Design And Evaluation Of High Power, High Efficiency And High Power Density Motor Drives For More Electric Aircrafts, Zhao Yuan

Graduate Theses and Dissertations

More-electric aircraft (MEA) is an attractive concept as it can reduce carbon dioxide emission, relieve fossil-fuel consumption, improve the overall efficiency of aircraft, and reduce the operational costs. However, it poses substantial challenges in designing a high-performance motor drive system for such applications. In the report of Aircraft Technology Roadmap to 2050, the propulsion converter is required to be ultra-high efficiency, high power density, and high reliability. Though the wide band-gap devices, such as the Silicon-carbide based Metal Oxide Silicon Field Effect (SiC-MOSFET), shows better switching performance and improved high-temperature performance compared to the silicon counterparts, applying it to the …

Design Of A 350 Kw Silicon Carbide Based 3-Phase Inverter With Ultra-Low Parasitic Inductance, Matthew Feurtado

Graduate Theses and Dissertations

The objective of this thesis is to present a design for a low parasitic inductance, high power density 3-phase inverter using silicon-carbide power modules for traction application in the electric vehicles with a power rating of 350 kW. With the market share of electric vehicles continuing to grow, there is a great opportunity for wide bandgap semiconductors such as silicon carbide (SiC) to improve the efficiency and size of the motor drives in these applications. In order to accomplish this goal, careful design and selection of each component in the system for optimum performance from an electrical, mechanical, and thermal …

Projecting Water Available For Irrigation Use And Identifying Water Supply Stress Under Climate Change Scenarios In Selected U.S. Fruit And Vegetable Production Regions, Andrew Shaw

Graduate Theses and Dissertations

Climate change affects water resources differently across geospatial regions in the United States (U.S). There is a concern of how water availability will be affected by changes in long-term temperature and precipitation patterns, specifically in major production regions for eight fruit and vegetable crops. The effects on surface water available for irrigation use and supply stress in five regions containing 31 Agricultural Statistics Districts (ASDs) were assessed. The Water Supply Stress Index Model was used and modified to project water available for irrigation use across nine climate scenarios driven by historical data, five General Circulation Models, two population scenarios, and …

Label-Free Optical Biomarkers Detect Early Calcific Aortic Valve Disease In A Wild-Type Mouse Model, Ishita Tandon, Shelby Johns, Alan Woessner, Jessica Perez, Delaney Cross, Asya Ozkizilcik, Timothy Muldoon, Srikanth Vallurupalli, Muralidhar Padala, Kyle P. Quinn, Kartik Balachandran

Biomedical Engineering Faculty Publications and Presentations

Background

Calcific aortic valve disease (CAVD) pathophysiology is a complex, multistage process, usually diagnosed at advanced stages after significant anatomical and hemodynamic changes in the valve. Early detection of disease progression is thus pivotal in the development of prevention and mitigation strategies. In this study, we developed a diet-based, non-genetically modified mouse model for early CAVD progression, and explored the utility of two-photon excited fluorescence (TPEF) microscopy for early detection of CAVD progression. TPEF imaging provides label-free, non-invasive, quantitative metrics with the potential to correlate with multiple stages of CAVD pathophysiology including calcium deposition, collagen remodeling and osteogenic differentiation.

Methods …

Environmental Hygiene For Covid-19: It's All About The Mask, Daniel B. Oerther, Mona Shattell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Shear Wave Velocity Anisotropy Of Salt- And Polymer-Amended Kaolinite, X. Kang, J. Cao, B. Bate

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Shear wave velocity (Vs) anisotropy of kaolinite mixed with sodium chloride (NaCl) and organic polymer (polyethylene oxide, xanthan gum, and chitosan) solutions was investigated using a custom-made floating wall consolidometer-type bender element testing system. The addition of salt and polymers influenced the microfabric anisoopy of platy kaolinite particles, thus resulted in the increment or decrement in the Vs anisotropy. The Vs of kaolinite in all three orthogonal directions increased as the NaCl concentration increased; however, the Vs anisotropy decreased. PEO and chitosan increased the Vs of kaolinite, while xanthan gum exhibited counter-effects. Vs anisotropy (Vs−hh/Vs−vh and Vs−hv/Vs−vh) of polymer amended …

Commercial And Legal Considerations Of Offsite Construction Projects And Their Hybrid Transactions, Rayan Assaad, Islam H. El-Adaway, Makarand Hastak, Kim La Scola Needy

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The commercial and legal challenges of offsite construction technology have become more pronounced with the ongoing rise and growing popularity of such construction method. Offsite construction represents a combination between construction services-based activities and manufacturing/fabrication goods-based tasks, thus called hybrid transactions. This mixed nature has created many uncertainties concerning whether the common law or the Uniform Commercial Code (UCC) shall govern. To this end, this paper aims to enhance the knowledge of the commercial and legal treatment of hybrid offsite construction transactions. To achieve that, this paper followed a research methodology that employs three types of analysis: Analysis of the …

Contractual Perspective For Bim Utilization In Us Construction Projects, Rayan Assaad, Islam H. El-Adaway, Ayman H. El Hakea, Matthew J. Parker, Tyler I. Henderson, Christopher R. Salvo, Muaz O. Ahmed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Although building information modeling (BIM) is experiencing substantial development and use in the construction industry, its legal and business structures lag far behind. While many research efforts have been devoted to promoting the implementation of BIM in the construction industry, very few of them have actually attempted to explore its contractual environment. In fact, previous studies reported the lack of, and need for, a holistic understanding of BIM contractual requirements. To fill this gap, this paper assists the various project parties in better understanding BIM contractual integration and utilization in the construction industry at different key levels: contractual incorporation of …

Leading Change During The Convergence Of An Epidemic And A Pandemic, Sarah Oerther, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As the first wave of COVID-19 cases spread around the globe in early 2020, the healthcare community adopted a medical model that emphasized the use of resources to mitigate viral spread (Oerther & Watson, 2020). Schools, churches, and businesses shutdown, and healthcare facilities – from outpatient clinics to inpatient elective surgeries – were closed or cancelled. Even long-term care facilities, such as nursing homes, limited access of visitors to patients in an attempt at mitigation. And for six months, the healthcare community focused almost exclusively on a medical response to COVID-19, securing stockpiles of ventilators and fast-tracking vaccine development.

An Efficient 3-D Stochastic Hie-Fdtd Algorithm For Investigation Of Statistical Variation In Electromagnetic Field, Kaikun Niu, Zhixiang Huang, Xingang Ren, Ke Xu, Minquan Li, Xianliang Wu, Ping Li, Lijun Jiang, Hakan Bagci

Electrical and Computer Engineering Faculty Research & Creative Works

We propose a stochastic hybrid implicit-explicit finite-difference time-domain method (S-HIE-FDTD) to compute the mean and variance of the electromagnetic (EM) fields using a single simulation, given those of the conductivity and permittivity in the computation domain. The mean and variance field update equations underlying the proposed method are derived from the field update equations of the 'traditional' deterministic HIE-FDTD. The Courant-Friedrichs-Lewy condition of the S-HIE-FDTD depends on the spatial discretization sizes only in two dimensions; therefore, for computation domains with fine geometric features only in the remaining dimension, it uses a time step size that is larger than that of …

Machine-Learning-Based Hybrid Method For The Multilevel Fast Multipole Algorithm, Jia Jing Sun, Sheng Sun, Yongpin P. Chen, Lijun Jiang, Jun Hu

Electrical and Computer Engineering Faculty Research & Creative Works

In this letter, a hybrid translation computation method for the multilevel fast multipole algorithm (MLFMA) is proposed based on machine learning. The hybrid method combines both generalized regression neural network (GRNN) and artificial neural network (ANN) to replace the traditional translation procedure during the solving process of the MLFMA. Based on the data corresponding to every one of the interaction list boxes at each level, the hybrid neural network is trained. Comparing with the previous machine learning method in this field, the proposed model is more general, and with lower complexity since it inherits the accuracy of the GRNN as …

Review Of The Emc Aspects Of Internet Of Things, Jiyu Wu, Yihong Qi, Guang Gong, Jun Fan, Miao Miao, Wei Yu, Jianhua Ma, James L. Drewniak

Electrical and Computer Engineering Faculty Research & Creative Works

Wireless devices are the largest part of the Internet-of-Things (IoT) units. Radiated, such as specific absorption rate and spurious related issues are regulated by the standards bodies. The functionality performance will greatly influence IoT system stability, user experience, and cost. Radio receiver desensitization and coexistence aspects of IoT devices are discussed in this article. Measurement technologies are briefly reviewed for transmit/receive mode only of single-input single-output (SISO), and multiple-input multiple-output (MIMO) devices, to provide a means of device performance evaluation and electromagnetic interference troubleshooting. An understanding of the electromagnetic compatibility aspects of the IoT and its measurement methods can help …

Deep Reinforcement Learning For Collaborative Edge Computing In Vehicular Networks, Mushu Li, Jie Gao, Lian Zhao, Xuemin Shen

Electrical and Computer Engineering Faculty Research and Publications

Mobile edge computing (MEC) is a promising technology to support mission-critical vehicular applications, such as intelligent path planning and safety applications. In this paper, a collaborative edge computing framework is developed to reduce the computing service latency and improve service reliability for vehicular networks. First, a task partition and scheduling algorithm (TPSA) is proposed to decide the workload allocation and schedule the execution order of the tasks offloaded to the edge servers given a computation offloading strategy. Second, an artificial intelligence (AI) based collaborative computing approach is developed to determine the task offloading, computing, and result delivery policy for vehicles. …

Radio Frequency Emissions From Dark-Matter-Candidate Magnetized Quark Nuggets Interacting With Matter, J. Pace Vandevender, C. Jerald Buchenauer, Chunpei Cai, Aaron P. Vandevender, Benjamin A. Ulmen

Michigan Tech Publications, Part 1

Quark nuggets are theoretical objects composed of approximately equal numbers of up, down, and strange quarks. They are also called strangelets, nuclearites, AQNs, slets, Macros, and MQNs. Quark nuggets are a candidate for dark matter, which has been a mystery for decades despite constituting ~ 85% of the universe’s mass. Most previous models of quark nuggets have assumed no intrinsic magnetic field; however, Tatsumi found that quark nuggets may exist in magnetars as a ferromagnetic liquid with a magnetic field BS = 1012±1 T. We apply that result to quark nuggets, a dark-matter candidate consistent with the Standard Model, and …

A Low-Cost Secure Iot Mechanism For Monitoring And Controlling Polygeneration Microgrids, Josué Martínez-Martínez, Diego Aponte-Roa, Idalides Vergara-Laurens, Wayne Weaver

Michigan Tech Publications, Part 1

The use of Internet-connected devices at homes has increased to monitor energy consumption. Furthermore, renewable energy sources have also increased, reducing electricity bills. However, the high cost of the equipment limits the use of these technologies. This paper presents a low-cost secured-distributed Internet of Things (IoT) system to monitor and control devices connected in a polygeneration microgrid, as a combined power system for local loads with renewable sources. The proposed mechanism includes a Wireless Sensor Actuator Networked Control System that links network nodes using the IEEE 802.15.4 standard. The Internet communication enables the monitor and control of devices using a …

Additive Manufacturing-Enabled Design, Manufacturing, And Lifecycle Performance, Tao Peng, Yi Zhu, Ming Leu, David Bourell

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Laser-Based Interfacial Patterning Enables Toughening Of Cfrp/Epoxy Joints Through Bridging Of Adhesive Ligaments, Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The ability to prevent catastrophic failures in secondary bonded CFRP adhesive joints is important for reliable automotive and aerospace structures. In a previous study, we proposed an innovative damage-tolerant interfacial design concept for adhesively bonded composite joints, which relied on the extrinsic dissipation of bridging adhesive ligaments enabled by controlling the adhesion at CFRP/epoxy interfaces. In this work, we experimentally validate this strategy by combining laser processing and mechanical testing using double cantilever beam (DCB) joints. Mechanical tests indicate that the pattern geometry, i.e., number and spacing of the areas with different adhesion, controls the formation of either single or …

In-Plane Anisotropic Third-Harmonic Generation From Germanium Arsenide Thin Flakes, Huseyin Sar, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A newly introduced two-dimensional (2D) layered germanium arsenide (GeAs) has attracted growing interest due to its promising highly in-plane anisotropic crystal structure and electronic properties for photonic and optoelectronic applications. The potential of 2D layered GeAs for many applications such as anisotropic photodetection, electronics, superconductivity and thermoelectricity is being investigated in recent studies. However, the intrinsic nonlinear optical properties of 2D layered GeAs have not been explored yet. Here, thickness- and incident polarization-dependent in-plane anisotropic third-harmonic generation (THG) from the mechanically exfoliated thin GeAs flakes is reported. Furthermore, the effect of the flake thickness on the THG conversion efficiency is …

Aldosterone Up-Regulates Voltage-Gated Potassium Currents And Nkcc1 Protein Membrane Fractions, Parveen Bazard, Bo Ding, Harish K. Chittam, Xiaoxia Zhu, Thomas A. Parks, Thomas E. Taylor-Clark, Venkat R. Bhethanabotla, Robert D. Frisina, Joseph P. Walton

Chemical and Biochemical Engineering Faculty Research & Creative Works

Na+–K+–2Cl− Cotransporter (NKCC1) is a protein that aids in the active transport of sodium, potassium, and chloride ions across cell membranes. It has been shown that long-term systemic treatment with aldosterone (ALD) can enhance NKCC1 protein expression and activity in the aging cochlea resulting in improved hearing. In the present work, we used a cell line with confirmed NKCC1 expression to demonstrate that in vitro application of ALD increased outward voltage-gated potassium currents significantly, and simultaneously upregulated whole lysate and membrane portion NKCC1 protein expression. These ALD-induced changes were blocked by applying the mineralocorticoid receptor antagonist eplerenone. However, application of …

Innovative Approach To Repair Corroded Steel Piles Using Ultra-High Performance Concrete, Binod Shrestha, Ahmed Gheni, Mohanad M. Abdulazeez, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel H-piles are a common structural system in existing bridges. Many steel H-piles have been corroded as a result of severe weather and acid/alkaline salt exposures, causing a reduction in the axial load capacity. This paper experimentally investigates the use of ultra-high performance concrete (UHPC) encasement as a novel repair method for corroded steel H-pile. UHPC displays better tensile strength, early compressive strength, workability, and durability compared with conventional concrete. The proposed repair is used to bridge the corroded section in H-pile using either a cast-in-place or precast UHPC elements. A series of push-out tests was conducted on eight full-scale …

Bond Behavior Between Steel Fiber Reinforced Polymer (Srp) And Concrete, Xingxing Zou, Lesley Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Steel fiber reinforced polymer (SRP) composite materials, which consist of continuous unidirectional steel wires (cords) embedded in a polymeric matrix, have recently emerged as an effective solution for strengthening of reinforced concrete (RC) structures. SRP is bonded to the surface of RC structures by the same matrix to provide external reinforcement. Interfacial debonding between the SRP and concrete is a primary concern in this type of application. This study aimed to investigate the bond characteristics between SRP and concrete determined by single-lap direct shear tests with different composite bonded lengths and fiber sheet densities (cord spacings). Specimens with medium density …

Utilizing A New Eco-Friendly Drilling Mud Additive Generated From Wastes To Minimize The Use Of The Conventional Chemical Additives, Abo Taleb T. Al-Hameedi, Husam H. Alkinani, Mohammed M. Alkhamis, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The cost of the drilling operation is very high. Drilling fluid presents 15 to 30% of the entire expense of the drilling process. Ordinarily, the major drilling fluids additives are viscosity modifiers, filtration control agents, and partial loss treatments. In this experimental work, full-set measurements under fresh and aged conditions, as well as high-temperature and high-pressure (HTHP) API filtration, were conducted to study the impacts of adding 0.5%, 1.5%, 2.5%, and 3.5% of black sunflower seeds’ shell powder (BSSSP) to spud mud. BSSSP of various grain sizes showed their ability to be invested for viscosity modifying, seepage loss controlling, and …

Modular Framework For Implementation And Analysis Of Recursive Filters With Considered And Neglected Parameters, Kyle J. Demars, Kari C. Ward

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper develops novel covariance and square-root factor formulations of a consider-neglect Kalman filter for navigation applications. The proposed filter partitions system parameters into three distinct categories: those to be estimated by the filter, those whose contribution to the system are considered without being explicitly estimated, and those with sufficiently low effect on the system such that their contribution can be neglected altogether. Discussion on appropriate selection of parameters to be considered and neglected is provided with specific attention given to descent-to-landing navigation. Monte Carlo simulations and analysis are performed to assess the performance of the developed square-root consider-neglect filter …

Coalescence Speed Of Two Equal-Sized Nanobubbles, Eric Bird, Jun Zhou, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In This Work, We Use Molecular Dynamics (MD) Simulations Coupled with Continuum-Based Theoretical Analysis to Study the Coalescence Dynamics of Two Equal-Sized Nanobubbles (NBs). We First Derive a Governing Equation for the Evolution of the Capillary Bridge Radius between Two Coalescing NBs from the Axisymmetric Navier-Stokes Equation. to Verify the Prediction from the Governing Equation, We Carry Out MD Simulations of the Coalescence of Two NBs in a Lennard-Jones Fluid System and Directly Measure the Bridge Radius, Rb, as a Function of Time, T. by Varying the Bubble Diameter, We Change the NB Ohnesorge Number from 0.46 to 0.33. in …

Experimental Evaluation Of Square Ferrocement Panels Using Polypropylene Wire Mesh, N. Khurram, U. Akmal, M. Raza, A. Hameed, M. Irfan Ul Hassan

Mining Engineering Faculty Research & Creative Works

Ferrocement panels are thin section comprised of hydraulic mortar reinforced with steel wire mesh and are susceptible to micro cracks at service conditions. The moisture and rainwater may infiltrate through these cracks and cause the reduction in capacity due to the corrosion of steel wire mesh. In the present study, a polypropylene (PP) wire mesh has been used to overcome this problem. The main objective of the study is to investigate the punching shear and bending capacity of the ferrocement panels using PP wire mesh. Experimental tests conducted on 32 simply supported square slabs panels of 450x450 mm subjected to …