Engineering Commons^™

Unsupervised Data Mining Technique For Clustering Library In Indonesia, Robbi Rahim, Joseph Teguh Santoso, Sri Jumini, Gita Widi Bhawika, Daniel Susilo, Danny Wibowo

Library Philosophy and Practice (e-journal)

Organizing school libraries not only keeps library materials, but helps students and teachers in completing tasks in the teaching process so that national development goals are in order to improve community welfare by producing quality and competitive human resources. The purpose of this study is to analyze the Unsupervised Learning technique in conducting cluster mapping of the number of libraries at education levels in Indonesia. The data source was obtained from the Ministry of Education and Culture which was processed by the Central Statistics Agency (abbreviated as BPS) with url: bps.go.id/. The data consisted of 34 records where the attribute …

Fingering Behavior Of Flame Spread Over Solid Combustibles, Tsuneyoshi Matsuoka, Kentaro Nakashima, Takuma Kajimoto, Akihiro Yoshimasa, Yuji Nakamura

Progress in Scale Modeling, an International Journal

In this study, the fingering pattern formation and the following flamelet spreading over three different kinds of thick combustibles, i.e., Poly methacrylate (PMMA), Poly ethylene (PE) and Poly carbonate (PC) were observed and the effective Lewis number correlation was validated. Experiments were performed with a narrow channel apparatus. In addition to the kinds of solid fuel materials, the channel height and the oxidizer velocity were varied as experimental parameters. An image analysis method was developed to quantify the number, diameter and spread rate of the flamelets. Replacing the fuel thickness into the thermal thickness, the effective Lewis number which is …

Managing Vibration Training Safety By Using Knee Flexion Angle And Rating Perceived Exertion, Long-Ren Chuang, Wen-Wen Yang, Po-Ling Chang, Vincent Chiun-Fan Chen, Chiang Liu, Tzyy-Yuang Shiang

Engineering Science Faculty Publications

Whole-body vibration (WBV) is commonly applied in exercise and rehabilitation and its safety issues have been a major concern. Vibration measured using accelerometers can be used to further analyze the vibration transmissibility. Optimal bending angles and rating of perceived exertion (RPE) evaluations have not been sufficiently explored to mitigate the adverse effect. Therefore, the aims of this study were to investigate the effect of various knee flexion angles on the transmissibility to the head and knee, the RPE during WBV exposure, and the link between the transmissibility to the head and the RPE. Sixteen participants randomly performed static squats with …

Wideband Anti-Jamming Based On Free Space Optical Communication And Photonic Signal Processing, Ben Wu, Yang Qi, Chenxi Qiu, Ying Tang

Henry M. Rowan College of Engineering Departmental Research

We propose and demonstrate an anti-jamming system to defend against wideband jamming attack. Free space optical communication is deployed to provide a reference for jamming cancellation. The mixed signal is processed and separated with photonic signal processing method to achieve large bandwidth. As an analog signal processing method, the cancellation system introduces zero latency. The radio frequency signals are modulated on optical carriers to achieve wideband and unanimous frequency response. With wideband and zero latency, the system meets the key requirements of high speed and real-time communications in transportation systems.

Modeling The Release And Spreading Of Permanganate From Aerated Slow-Release Oxidants In A Laboratory Flow Tank, Ann Kambhu, Yusong Li, Troy E. Gilmore, Steve D. Comfort

School of Natural Resources: Faculty Publications

Aerated, slow-release oxidants are a relatively new technology for treating contaminated aquifers. A critical need for advancing this technology is developing a reliable method for predicting the radius of influence (ROI) around each drive point. In this work, we report a series of laboratory flow tank experiments and numerical modeling efforts designed to predict the release and spreading of permanganate from aerated oxidant candles (oxidant-wax composites). To mimic the design of the oxidant delivery system used in the field, a double screen was used in a series of flow tank experiments where the oxidant was placed inside the inner screen …

Développement D’Un Outil Personnalisé D’Aide À La Décision En Vue De Minimiser Les Risques En Manutention Impliquant Des Postures Symétriques Et Asymétriques, Aboulfazl Shirazi-Adl, Navid Arjmand, André Plamondon

Rapports de recherche scientifique

Les charges excessives imposées sur la colonne vertébrale lombaire constituent un facteur de risques important pour les maux de dos. La modélisation biomécanique de la colonne vertébrale est la seule approche non invasive permettant d’estimer ces charges, mais la complexité de ces modèles limite leur utilisation par des ergonomes. Pour aider ces derniers à identifier des situations à risque de blessures au dos afin de limiter le chargement aux structures lombaires, il existe des outils d’aide à la décision comme l’équation de levage du NIOSH (Revised NIOSH Lifting Equation, Waters et al., 1993) ainsi que les tables …

Cyclic Damage Accumulation In The Femoral Constructs Made With Cephalomedullary Nails, Farah Hamandi, Alyssa Whitney, Mark H. Stouffer, Michael J. Prayson, Jorn Rittweger, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: The purpose of this study was to evaluate the risk of peri-prosthetic fracture of constructs made with cephalomedullary (CM) long and short nails. The nails were made with titanium alloy (Ti-6Al-4V) and stainless steel (SS 316L). Methods: Biomechanical evaluation of CM nail constructs was carried out with regard to post-primary healing to determine the risk of peri-implant/peri-prosthetic fractures. Therefore, this research comprised of, non-fractured, twenty-eight pairs of cadaveric femora that were randomized and implanted with four types of fixation CM nails resulting in four groups. These constructs were cyclically tested in bi-axial mode for up to 30,000 cycles. All …

Aircraft Input Files For Pylot And Machupx, Jaden Thurgood

Browse all Datasets

This data was used in an attempt at system identification for rudderless aircraft using simulation.

Exploring The Silent Aspect Of Carbon Nanopores, Teresa J. Bandosz

Publications and Research

Recently, owing to the discovery of graphene, porous carbons experienced a revitalization in their explorations. However, nowadays, the focus is more on search for suitable energy advancing catalysts sensing, energy storage or thermal/light absorbing features than on separations. In many of these processes, adsorption, although not emphasized sufficiently, can be a significant step. It can just provide a surface accumulation of molecules used in other application-driving chemical or physical phenomena or can be even an additional mechanism adding to the efficiency of the overall performance. However, that aspect of confined molecules in pores and their involvement in the overall performance …

Differential Privacy For Industrial Internet Of Things: Opportunities, Applications And Challenges, Bin Jiang, Houbing Song, Jianqiang Li, Guanghui Yue

Publications

The development of Internet of Things (IoT) brings new changes to various fields. Particularly, industrial Internet of Things (IIoT) is promoting a new round of industrial revolution. With more applications of IIoT, privacy protection issues are emerging. Specially, some common algorithms in IIoT technology such as deep models strongly rely on data collection, which leads to the risk of privacy disclosure. Recently, differential privacy has been used to protect user-terminal privacy in IIoT, so it is necessary to make in-depth research on this topic. In this paper, we conduct a comprehensive survey on the opportunities, applications and challenges of differential …

Piezoelectrically-Transduced Zno-On-Diamond Resonators With Enhanced Signal-To-Noise Ratio And Power-Handling Capability For Sensing And Wireless Communication Applications, Xu Han

USF Tampa Graduate Theses and Dissertations

Microelectromechanical system (MEMS) resonators emerged a few decades ago, and now they have been well developed and commercially utilized as a core part in many radio frequency (RF) communication hardware as well as micro-sensing and detections for many different latest applications. Since MEMS-based devices are made small thanks to the microfabrication technology's improvement, the cost can be drastically reduced when mass-produced on wafer batches, and the devices still maintain a decent performance with negligible power consumption. This perfectly fits into the requirements of the newest internet-of-thing (IoT) and headset applications. Our previous research mainly focuses on designing and fabricating MEMS …

Improving Vertical Axis Wind Turbine (Vawt) Performance With Placement Strategies: Final Report, Patrick A. Tebbe, Nazli A. Yilmaz Wodzinski, Namyong Lee

Mechanical and Civil Engineering Department Publications

This project was focused on the use and placement of vertical axis wind turbines (VAWTs). Studies were focused on areas not typically addressed in previous work; small wind at very low elevations (i.e. within the boundary layer). Numerical studies were made of how VAWTs function as well as the potential wind environments they may be placed in. A simplified numerical code, based on two-dimensional potential flow functions, was developed to model flow around buildings and other structures. The code allows a rapid determination of regions where flow may experience speed-up and where turbulence may result.

Experimental facilities were designed and …

State Consistence Of Data-Driven Reduced Order Models For Parametric Aeroelastic Analysis, William C. Krolick, Jung I. Shu, Yi Wang, Kapil Pant

Faculty Publications

This paper investigates the state consistence of parametric data-driven reduced order models (ROMs) in a state-space form obtained by various system identification methods, including autoregressive exogenous (ARX) and subspace identification (N4SID), for aeroelastic analysis in varying flight conditions. The target flight envelop is first partitioned into discrete grid points, on each of which an aerodynamic ROM is constructed using system identification to capture the dependence of the generalized aerodynamic force on the generalized displacement of structural modes. High-fidelity aeroelastic modal perturbation simulations are used to generate the ROM training and verification data. Aerodynamic ROMs not on the grid point are …

Performance Of Egyptian Cotton Fibres During Combing Process., Fawkia El-Habiby, Rizk Abdullah El-Bealy

Mansoura Engineering Journal

The aim of the present work is to study the influence of combing ratio on Egyptian cotton fibres trying to find the most suitable combing ratio for these fibres. Comber laps were prepared from G70 and G75 cotton fibres and processed on comber at different combing ratios. The actual combing ratio was determined. It was 11, 11.8. 123, 4, 5, 6.8 and 9.6% for G70 cotton fibre and 11.9 13.8 15.8, 18, and 19.9% for G75 cotton fibre. Fibre length parameters were measured for comber laps, comber sliver and comber noil. Area under fibre length distribution curve was measured for …

A Bibliometric Analysis Of Plant Disease Classification With Artificial Intelligence Based On Scopus And Wos, Shivali Amit Wagle, Harikrishnan R

Library Philosophy and Practice (e-journal)

The maneuver of Artificial Intelligence (AI) techniques in the field of agriculture help in the classification of diseases. Early prediction of the disease benefits in taking relevant management steps. This is an important step towards controlling the disease growth that will yield good quality products to fulfill the global food demand. The main objective of this paper is to study the extent of research work done in this area of plant disease classification. The paper discusses the bibliometric analysis of plant disease classification with AI in Scopus and Web of Science core collection (WOS) database in analyzing the research by …

Editors’ Choice-Power-Generating Electrochemical Co2 Scrubbing From Air Enabling Practical Aemfc Application, Yiwei Zheng, Garrett Huang, Mrinmay Mandal, John R. Varcoe, Paul A. Kohl, William E. Mustain

Faculty Publications

Anion exchange membrane fuel cells (AEMFCs) have been widely touted as a low-cost alternative to existing proton exchange membrane fuel cells. However, AEMFCs operating on air suffer from a severe performance penalty caused by carbonation from exposure to CO2. Many approaches to removing CO2 from the cathode inlet would consume valuable energy and complicate the systems-level balance-of-plant. Therefore, this work focuses on an electrochemical solution where CO2 removal would still generate power, but not expose an entire AEMFC stack to carbonation conditions. Such a system consists of two AEMFCs in series. The first AEMFC, which acts as an anion exchange …

Deciphering And Engineering An Unprecedented Fungal Biosynthetic Pathway For Expanded Chemical Diversity In Flavonoids, Jixun Zhan

Funded Research Records

No abstract provided.

Defect Detection In Freight Railcar Tapered-Roller Bearings Using Vibration Techniques, Constantine Tarawneh, Joseph Montalvo, Brent Wilson

Mechanical Engineering Faculty Publications

Currently, there are two types of defect detection systems used to monitor the health of freight railcar bearings in service: wayside hot-box detection systems and trackside acoustic detection systems. These systems have proven to be inefficient in accurately determining bearing health, especially in the early stages of defect development. To that end, a prototype onboard bearing condition monitoring system has been developed and validated through extensive laboratory testing and a designated field test in 2015 at the Transportation Technology Center, Inc. in Pueblo, CO. The devised system can accurately and reliably characterize the health of bearings based on developed vibration …

Mapping Of The Information Flow Of The Valle Occidental Coffee Region: A System-Of-Systems Perspective, Irene Campos

CESUN Conference

Uncertainty is a characteristic of many of the contemporary environments that our systems inhabit. In the case of farming systems, uncertainty has always been present in the form of unpredictable weather conditions, disease outbreaks and evolving societal and economic factors. Uncertainty poses a challenge for communication and information alignment, which is especially important for a farming system responding to disasters. A first step towards finding solutions for problems of information alignment in systems is mapping and identifying information links in them. The goal of this research is to map the information flow and feedback dynamics of the Valle Occidental coffee …

Exploring How Prize Challenges Complement An Organization's Innovation Efforts, Ademir Vrolijk, Zoe Szajnfarber

CESUN Conference

prize challenge, open innovation, crowdsourcing, NASA, 3D Printed Habitat Challenge, additive manufacturing

Risk Management Decision Making For Security And Trust In Hardware Supply Chains, Zachary A. Collier, Thomas L. Polmateer, James H. Lambert

CESUN Conference

Modern cyber-physical systems are enabled by electronic hardware and embedded systems. The security of these sub-components is a concern during the design and operational phases of cyber-physical system life cycles. Compromised electronics can result in mission-critical failures, unauthorized access, and other severe consequences. As systems become more complex and feature greater connectivity, system owners must make decisions regarding how to mitigate risks and ensure resilience and trust. This paper provides an overview of research efforts related to assessing and managing risks, resilience, and trust with an emphasis on electronic hardware and embedded systems. The research takes a decision-oriented perspective, drawing …

The Challenges And Opportunities Of Teaching Systems Engineering For Large Scale Engineering Systemse, Edward Pines, Dennis Engi

CESUN Conference

In this paper, we discuss a course in large scale systems engineering that was developed as part of a twelve-credit Graduate Certificate in Systems Engineering for part-time and returning students. Our focus was on how to work on big, unmanageable, messy problems. Teaching systems engineering for large-scale engineering systems is challenging for many reasons. One of the main challenges is the breadth of material to be addressed within one or two courses. Other challenges result from how students learn about the transitions from the development of a conceptual framework to systems architecture through engineering design, mathematical analysis and eventual construction …

Propose Of Architecture Design For Early Warning System With Space And Terrestrial Infrastructure, Akihiko Nishino

CESUN Conference

The purpose of this research is to design an architecture of early warning system with Global Navigation Satellite System (GNSS) and terrestrial infrastructure for improving a coverage of disaster information dissemination. In the proposed architecture, segments and information flow are identified in order to introduce an early warning system to target areas where there are no such kinds of public alert distribution. It can be adapted worldwide by combining GNSS satellite and terrestrial infrastructure. At the beginning of disaster, information will be sent from the agency via GNSS to terrestrial infrastructure, widely used such as a siren and a public …

Principles For Determining The Motion Of Blood Through Arteries, Sylvio R. Bistafa

Euleriana

Translation of Principia pro motu sanguinis per arterias determinando (E855). This work of 1775 by L. Euler is considered to be the first mathematical treatment of circulatory physiology and hemodynamics.

A Bibliometric Analysis Of Distributed Incremental Clustering On Images, Ayushi Agrawal, Preeti Mulay, Krithika Iyer, Saloni Sarbhai

Library Philosophy and Practice (e-journal)

Unstructured information is continuously irregular and streaming information from such a sequence is tedious because it lacks labels and accumulates with time. This is possible using Incremental Clustering algorithms that use previously learned information to accommodate new data and avoid retraining. This paper therefore seeks to understand the status of "Distributed Incremental Clustering" on images with text and numerical values, its limitations, scope, and other details to devise a better algorithm in future. To further enhance the analysis, we have also included methodology, which can be used to perform clustering on images or documents based on its content.

Novel Guidewire Design And Coating For Continuous Delivery Of Adenosine During Interventional Procedures., Mervyn B Forman, Erik Brewer, Zachary R Brown, Elizabeth V Menshikova, Anthony M. Lowman, Edwin K Jackson

Henry M. Rowan College of Engineering Departmental Research

Background: The "no-reflow phenomenon" compromises percutaneous coronary intervention outcomes. There is an unmet need for a device that prevents no-reflow phenomenon. Our goal was to develop a guidewire platform comprising a nondisruptive hydrophilic coating that allows continuous delivery of adenosine throughout a percutaneous coronary intervention. Methods and Results: We developed a guidewire with spaced coils to increase surface area for drug loading. Guidewires were plasma treated to attach hydroxyl groups to metal surfaces, and a methoxy-polyethylene glycol-silanol primer layer was covalently linked to hydroxyl groups. Using polyvinyl alcohol, polyvinyl pyrrolidone, and polyvinyl acetate, a drug layer containing jet-milled adenosine was …

Removal Of Pharmaceutical Residues From Water And Wastewater Using Dielectric Barrier Discharge Methods—A Review, Emile S. Massima Mouele, Jimoh O. Tijani, Kassim O. Badmus, Omoniyi Pereao, Omotola Babajide, Cheng Zhang, Tao Shao, Eduard Sosnin, Victor Tarasenko, Ojo O. Fatoba, Katri Laatikainen, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Persistent pharmaceutical pollutants (PPPs) have been identified as potential endocrine disruptors that mimic growth hormones when consumed at nanogram per liter to microgram per liter concentrations. Their occurrence in potable water remains a great threat to human health. Different conventional technologies developed for their removal from wastewater have failed to achieve complete mineralization. Advanced oxidation technologies such as dielectric barrier discharges (DBDs) based on free radical mechanisms have been identified to completely decompose PPPs. Due to the existence of pharmaceuticals as mixtures in wastewater and the recalcitrance of their degradation intermediate by-products, no single advanced oxidation technology has been able …

College Of Engineering News, Georgia Southern University

College of Engineering & Computing: News & Publications (2010-2023)

• Graduate Lands Dream Job at Tesla

Characterization Of The Strain-Rate–Dependent Mechanical Response Of Single Cell–Cell Junctions, Amir Monemian Esfahani, Jordan Rosenbohm, Bahareh Tajvidi Safa, Nickolay V. Lavrik, Grayson Minnick, Quan Zhou, Fang Kong, Xiaowei Jin, Eunju Kim, Ying Liu, Yongfeng Lu, Jung Yul Lim, James K. Wahl Iii, Ming Dao, Changjin Huang, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Cell–cell adhesions are often subjected to mechanical strains of different rates and magnitudes in normal tissue function. However, the rate-dependent mechanical behavior of individual cell– cell adhesions has not been fully characterized due to the lack of proper experimental techniques and therefore remains elusive. This is particularly true under large strain conditions, which may potentially lead to cell–cell adhesion dissociation and ultimately tissue fracture. In this study, we designed and fabricated a single-cell adhesion micro tensile tester (SCAμTT) using twophoton polymerization and performed displacement-controlled tensile tests of individual pairs of adherent epithelial cells with a mature cell–cell adhesion. Straining the …

Research Of Focl Parameters In The Range Of Positive Temperatures, Dilmurod Davronbekov, Zafar Khakimov

Bulletin of TUIT: Management and Communication Technologies

This article studies the parameters of fiber-optic communication lines (FOCL) in the temperature range. For research, a climatic unit has been developed that allows a wide temperature range for testing (from -90°C to + 90°C) and an experimental complex for investigating the stability of optical parameters of a fiber-optic cable with temperature changes in the range from + 18°C to + 76°C. A technology of sequential switching of optical fibers of a fiber-optic cable by means of welding is proposed, thanks to which the constructive problem of placing a long optical fiber in a limited volume of a heat chamber …