Engineering Commons^™

Strain Field_X, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘Strain field_x’ spreadsheet is the radial strain information of all the nodes. The first two columns of data are location information of the node in pixel coordinates. The third column is the information recorded at the first time, the fourth column is the information recorded at the second time, and so on.

Supporting information

T134, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T154, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T314, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T114, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T414, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

Strain Field_Y, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘Strain field_y’ spreadsheet is the axial strain information of all the nodes. Data format is the same as ‘Strain field_x’

Supporting information

Pf7, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘PS’ and ‘PF’ spreadsheets are the data of the prediction and calibration tests. (The data in this series are overall stress and strain information).

Supporting information

Ps Series, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘PS’ and ‘PF’ spreadsheets are the data of the prediction and calibration tests. (The data in this series are overall stress and strain information).

Supporting information

T111, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T124, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

T214, Pingxin Xia, Longtan Shao, Wen Deng

Stress-State Dependency of the Deformation Ratio of Quasi-Elastic Granular Soils under Cyclic Loading -- Raw Data

‘T’ series spreadsheets are the raw data of all tests. (The data in this series are overall stress and strain information).

Supporting information

Simultaneous Experimental Evaluation Of Pulse Shape And Deadtime Phenomenon Of Gm Detector, Bader Almutairi, Syed B. Alam, Cameron S. Goodwin, Shoaib Usman, Tayfun Akyurek

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Analysis of several pulse shape properties generated by a Geiger Mueller (GM) detector and its dependence on applied voltage was performed. The two-source method was utilized to measure deadtime while simultaneously capturing pulse shape parameters on an oscilloscope. A wide range of operating voltages (600-1200 V) beyond the recommended operating voltage of 900 V was investigated using three radioactive sources (²⁰⁴Tl, ¹³⁷Cs, ²²Na). This study investigates the relationship between operating voltage, pulse shape properties, and deadtime of the detector. Based on the data, it is found that deadtime decreases with increasing voltage from 600 to 650 …

Managing Quality In Aviation Projects, James W. Marion, Tracey M. Richardson, Vittal Anantatmula

Publications

From aircraft manufacturing, product customization, aircraft maintenance, and aircraft launch and recovery, project management is threaded through all aspects of aviation. Given the supreme importance of quality to every aircraft manufacturer, airline, and passenger, it would be expected that quality management, within the context of project management, would be a construct that is clearly defined. The aim of this mixed-methods research seeks to understand how quality is managed and assured in aviation projects, whether or not the current quality management framework is applicable to the aviation industry, and how quality should ultimately be managed in aviation projects. The results of …

Career: Support Our Troops: Re-Storying Student Veteran And Service Member Deficit In Engineering Through Professional Formation And Community Advocacy, Angela L. Minichiello

Funded Research Records

No abstract provided.

Noise Optimizes Super-Turing Computation In Recurrent Neural Networks, Emmett Redd, Steven Senger, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

This paper explores the benefit of added noise in increasing the computational complexity of digital recurrent neural networks (RNNs). The physically accepted model of the universe imposes rational number, stochastic limits on all calculations. An analog RNN with those limits calculates at the super-Turing complexity level BPP/log∗. In this paper, we demonstrate how noise aids digital RNNs in attaining super-Turing operation similar to analog RNNs. We investigate moving limited-precision systems from not being chaotic at small amounts of noise, through consistency with chaos, to overwhelming it at large amounts of noise. A Kolmogorov-complexity-based proof shows that an infinite computational class …

A Study On Fire Hazards Of Oil Tanks In Urban Areas With Scale Model Experiments, Ho Yin Ng, Yu Wan, Wan Ki Chow

Progress in Scale Modeling, an International Journal

Large fuel tanks are located in an urban area of Tsing Yi in Hong Kong, giving potentially high risks to people living nearby if a fire was to occur. Scale modeling experiments were carried out to investigate the potential of fire hazards. Propanol pool fires with five different scales of oil tanks were studied first. Appropriate tank sizes were then put in a 1/2500 architectural scale model on the Tsing Yi Island to study a fuel tank fire. Results show that the heat and smoke from a fire would affect occupants staying in areas near to the fuel tanks. Fire …

Unsupervised Data Mining Technique For Clustering Library In Indonesia, Robbi Rahim, Joseph Teguh Santoso, Sri Jumini, Gita Widi Bhawika, Daniel Susilo, Danny Wibowo

Library Philosophy and Practice (e-journal)

Organizing school libraries not only keeps library materials, but helps students and teachers in completing tasks in the teaching process so that national development goals are in order to improve community welfare by producing quality and competitive human resources. The purpose of this study is to analyze the Unsupervised Learning technique in conducting cluster mapping of the number of libraries at education levels in Indonesia. The data source was obtained from the Ministry of Education and Culture which was processed by the Central Statistics Agency (abbreviated as BPS) with url: bps.go.id/. The data consisted of 34 records where the attribute …

Fingering Behavior Of Flame Spread Over Solid Combustibles, Tsuneyoshi Matsuoka, Kentaro Nakashima, Takuma Kajimoto, Akihiro Yoshimasa, Yuji Nakamura

Progress in Scale Modeling, an International Journal

In this study, the fingering pattern formation and the following flamelet spreading over three different kinds of thick combustibles, i.e., Poly methacrylate (PMMA), Poly ethylene (PE) and Poly carbonate (PC) were observed and the effective Lewis number correlation was validated. Experiments were performed with a narrow channel apparatus. In addition to the kinds of solid fuel materials, the channel height and the oxidizer velocity were varied as experimental parameters. An image analysis method was developed to quantify the number, diameter and spread rate of the flamelets. Replacing the fuel thickness into the thermal thickness, the effective Lewis number which is …

Managing Vibration Training Safety By Using Knee Flexion Angle And Rating Perceived Exertion, Long-Ren Chuang, Wen-Wen Yang, Po-Ling Chang, Vincent Chiun-Fan Chen, Chiang Liu, Tzyy-Yuang Shiang

Engineering Science Faculty Publications

Whole-body vibration (WBV) is commonly applied in exercise and rehabilitation and its safety issues have been a major concern. Vibration measured using accelerometers can be used to further analyze the vibration transmissibility. Optimal bending angles and rating of perceived exertion (RPE) evaluations have not been sufficiently explored to mitigate the adverse effect. Therefore, the aims of this study were to investigate the effect of various knee flexion angles on the transmissibility to the head and knee, the RPE during WBV exposure, and the link between the transmissibility to the head and the RPE. Sixteen participants randomly performed static squats with …

Wideband Anti-Jamming Based On Free Space Optical Communication And Photonic Signal Processing, Ben Wu, Yang Qi, Chenxi Qiu, Ying Tang

Henry M. Rowan College of Engineering Departmental Research

We propose and demonstrate an anti-jamming system to defend against wideband jamming attack. Free space optical communication is deployed to provide a reference for jamming cancellation. The mixed signal is processed and separated with photonic signal processing method to achieve large bandwidth. As an analog signal processing method, the cancellation system introduces zero latency. The radio frequency signals are modulated on optical carriers to achieve wideband and unanimous frequency response. With wideband and zero latency, the system meets the key requirements of high speed and real-time communications in transportation systems.

Modeling The Release And Spreading Of Permanganate From Aerated Slow-Release Oxidants In A Laboratory Flow Tank, Ann Kambhu, Yusong Li, Troy E. Gilmore, Steve D. Comfort

School of Natural Resources: Faculty Publications

Aerated, slow-release oxidants are a relatively new technology for treating contaminated aquifers. A critical need for advancing this technology is developing a reliable method for predicting the radius of influence (ROI) around each drive point. In this work, we report a series of laboratory flow tank experiments and numerical modeling efforts designed to predict the release and spreading of permanganate from aerated oxidant candles (oxidant-wax composites). To mimic the design of the oxidant delivery system used in the field, a double screen was used in a series of flow tank experiments where the oxidant was placed inside the inner screen …

Développement D’Un Outil Personnalisé D’Aide À La Décision En Vue De Minimiser Les Risques En Manutention Impliquant Des Postures Symétriques Et Asymétriques, Aboulfazl Shirazi-Adl, Navid Arjmand, André Plamondon

Rapports de recherche scientifique

Les charges excessives imposées sur la colonne vertébrale lombaire constituent un facteur de risques important pour les maux de dos. La modélisation biomécanique de la colonne vertébrale est la seule approche non invasive permettant d’estimer ces charges, mais la complexité de ces modèles limite leur utilisation par des ergonomes. Pour aider ces derniers à identifier des situations à risque de blessures au dos afin de limiter le chargement aux structures lombaires, il existe des outils d’aide à la décision comme l’équation de levage du NIOSH (Revised NIOSH Lifting Equation, Waters et al., 1993) ainsi que les tables …

Cyclic Damage Accumulation In The Femoral Constructs Made With Cephalomedullary Nails, Farah Hamandi, Alyssa Whitney, Mark H. Stouffer, Michael J. Prayson, Jorn Rittweger, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: The purpose of this study was to evaluate the risk of peri-prosthetic fracture of constructs made with cephalomedullary (CM) long and short nails. The nails were made with titanium alloy (Ti-6Al-4V) and stainless steel (SS 316L). Methods: Biomechanical evaluation of CM nail constructs was carried out with regard to post-primary healing to determine the risk of peri-implant/peri-prosthetic fractures. Therefore, this research comprised of, non-fractured, twenty-eight pairs of cadaveric femora that were randomized and implanted with four types of fixation CM nails resulting in four groups. These constructs were cyclically tested in bi-axial mode for up to 30,000 cycles. All …

Aircraft Input Files For Pylot And Machupx, Jaden Thurgood

Browse all Datasets

This data was used in an attempt at system identification for rudderless aircraft using simulation.

Exploring The Silent Aspect Of Carbon Nanopores, Teresa J. Bandosz

Publications and Research

Recently, owing to the discovery of graphene, porous carbons experienced a revitalization in their explorations. However, nowadays, the focus is more on search for suitable energy advancing catalysts sensing, energy storage or thermal/light absorbing features than on separations. In many of these processes, adsorption, although not emphasized sufficiently, can be a significant step. It can just provide a surface accumulation of molecules used in other application-driving chemical or physical phenomena or can be even an additional mechanism adding to the efficiency of the overall performance. However, that aspect of confined molecules in pores and their involvement in the overall performance …

Differential Privacy For Industrial Internet Of Things: Opportunities, Applications And Challenges, Bin Jiang, Houbing Song, Jianqiang Li, Guanghui Yue

Publications

The development of Internet of Things (IoT) brings new changes to various fields. Particularly, industrial Internet of Things (IIoT) is promoting a new round of industrial revolution. With more applications of IIoT, privacy protection issues are emerging. Specially, some common algorithms in IIoT technology such as deep models strongly rely on data collection, which leads to the risk of privacy disclosure. Recently, differential privacy has been used to protect user-terminal privacy in IIoT, so it is necessary to make in-depth research on this topic. In this paper, we conduct a comprehensive survey on the opportunities, applications and challenges of differential …

Piezoelectrically-Transduced Zno-On-Diamond Resonators With Enhanced Signal-To-Noise Ratio And Power-Handling Capability For Sensing And Wireless Communication Applications, Xu Han

USF Tampa Graduate Theses and Dissertations

Microelectromechanical system (MEMS) resonators emerged a few decades ago, and now they have been well developed and commercially utilized as a core part in many radio frequency (RF) communication hardware as well as micro-sensing and detections for many different latest applications. Since MEMS-based devices are made small thanks to the microfabrication technology's improvement, the cost can be drastically reduced when mass-produced on wafer batches, and the devices still maintain a decent performance with negligible power consumption. This perfectly fits into the requirements of the newest internet-of-thing (IoT) and headset applications. Our previous research mainly focuses on designing and fabricating MEMS …

Improving Vertical Axis Wind Turbine (Vawt) Performance With Placement Strategies: Final Report, Patrick A. Tebbe, Nazli A. Yilmaz Wodzinski, Namyong Lee

Mechanical and Civil Engineering Department Publications

This project was focused on the use and placement of vertical axis wind turbines (VAWTs). Studies were focused on areas not typically addressed in previous work; small wind at very low elevations (i.e. within the boundary layer). Numerical studies were made of how VAWTs function as well as the potential wind environments they may be placed in. A simplified numerical code, based on two-dimensional potential flow functions, was developed to model flow around buildings and other structures. The code allows a rapid determination of regions where flow may experience speed-up and where turbulence may result.

Experimental facilities were designed and …

State Consistence Of Data-Driven Reduced Order Models For Parametric Aeroelastic Analysis, William C. Krolick, Jung I. Shu, Yi Wang, Kapil Pant

Faculty Publications

This paper investigates the state consistence of parametric data-driven reduced order models (ROMs) in a state-space form obtained by various system identification methods, including autoregressive exogenous (ARX) and subspace identification (N4SID), for aeroelastic analysis in varying flight conditions. The target flight envelop is first partitioned into discrete grid points, on each of which an aerodynamic ROM is constructed using system identification to capture the dependence of the generalized aerodynamic force on the generalized displacement of structural modes. High-fidelity aeroelastic modal perturbation simulations are used to generate the ROM training and verification data. Aerodynamic ROMs not on the grid point are …