Engineering Commons^™

The Development And Implementation Of A Computational Framework To Simulate Patellofemoral Joint Mechanics, Mahmood Rashedi

Master’s Theses

Anterior knee pain affects approximately 25% of adults and is associated with altered joint mechanics. Patellofemoral joint (PFJ) models vary widely in complexity, with no established gold standard. Musculoskeletal models efficiently estimate joint loading but do not capture tissue-level mechanics, whereas finite element (FE) models provide tissue-level predictions at greater computational cost. This thesis developed a workflow to evaluate relationships between musculoskeletal model-predicted PFJ loads and FE-predicted cartilage mechanics, examined the impact of altered quadriceps activation, and introduced improved computational models.

Marker trajectories and ground reaction forces were collected from four adults (2 male, 2 female) during walking and squatting. …

Analysis Of Stem Activities At Preschool And Primary School Levels In The Usa's And Turkiye's Educational Reports Based On The Engineering Design Process, Cetin Kursat Bilir, Mehmet Fatih Öçal, Esra Yilmaz Bilir

Indiana STEM Education Conference

This comparative study examines STEM activities from preschool to grade 4 in the United States and Türkiye using the Engineering Design Process (EDP) framework. Five activities from each country were selected based on national standards (NGSS in the U.S.; Ministry of National Education STEM Standards in Türkiye). Using qualitative content analysis, we examined how each activity reflects the stages of the EDP. The findings highlight ways to strengthen STEM education through design-based learning and offer teachers practical insights for integrating engineering design into early education.

Green Energy Innovation As A Theme For Integrated Stem Curriculum In K-8 Out-Of-School Learning, Humphrey Chinenye Ochulor, Paul Asunda, Swagata Sarkar, Comfort Temitope Aje, Deepanshu Gupta

Indiana STEM Education Conference

In this project, we developed a theme of Green Energy Innovation (GEI) for K-8 integrated STEM (iSTEM) out-of-school learning that includes scientific concepts, engineering design, mathematical measurement, and data collection. Anchored in engineering design (English, 2016), the researchers designed a curricular unit that included simple and complex solar car models. The researcher-designed solar car prototypes serve as STEM kits that support students’ iSTEM-based engineering design activities.

Indiana Bridges: Inclusive Stem Learning For Students With Down Syndrome, Elizabeth N. Christian, Jeffrey A. Nowak

Indiana STEM Education Conference

This research brief explores how materials and the engineering design process may be used to support inclusive STEM learning for students with Down syndrome. Conducted as a series of five consecutive workshops over a summer break, the Indiana Bridges project introduced engineering concepts through bridge-themed sessions created to be accessible for all ages and abilities. Students ages 11-20 with Down syndrome and two teacher education faculty participated in five workshops. Family members and center support staff frequently participated. Bridges from across the state of Indiana and classroom materials familiar to the participants provided entry points while new materials extended their …

More Than A Design Task: How Questions Shape Student Attention And Learning, Isaiah Kent-Schneider

Indiana STEM Education Conference

Incorporating engineering design activities into education has the potential to transform learning and students' educational experiences. However, when teachers implement engineering design without asking purposeful questions to focus students' attention, students tend to focus on the task but miss out on the intended learning of underlying science and math concepts. This research brief provides practical examples of questions teachers can use to focus student attention during engineering design activities.

Utilising Video Recordings To Assess Student Pilot Performance: An Exploratory Study During A Simulated Training Flight, Bradley Moncion, Shi Cao, Allison Lynch, Suzanne K. Kearns, Elizabeth Irving, Ewa Niechwiej-Szwedo

Journal of Aviation/Aerospace Education & Research

In ab initio flight training, the quality of the feedback a flight instructor provides their student is essential to their success. While other high-performance and safety-critical industries have incorporated the use of video recordings into training and assessments, the aviation industry generally has not. There are some studies addressing the potential benefits of video recordings in training professional pilots, but there is a lack of research at the ab initio level. In this study, five flight instructors assessed the performance of student pilots conducting a simulated training flight using a 4-point marking scale. The flights instructors were then tasked with …

Navigating The Challenges: Preflight Planning With Notam In Australia’S General Aviation Sector, Joshua Chiang, Guido Carim Junior

Journal of Aviation/Aerospace Education & Research

Notices to Airmen (NOTAMs) are an integral part of a pilot’s preflight navigational briefing, providing pertinent information in textual format. However, significant shortcomings have been found in the NOTAM system and in its use, with many of the shortcomings revolving around the interface. This study aimed to identify and evaluate the challenges general aviation pilots face when interacting with NOTAMs during preflight navigational planning. A thematic analysis study was conducted and included episodic semi-structured interviews with 15 pilots and document analysis. The interview transcription and excerpts of NOTAMs were analyzed following a thematic analysis technique. The findings of this preliminary …

Evaluation Of Tactile Cueing Embedded In An Aviation Headset On Pilot Altitude Control, Nicholas D. Wilson, Jessica Van Bree, Matthew Cleveland, Sunny Charakuru, Thomas Petros, Richard Ferraro, Kouhyar Tavakolian

Journal of Aviation/Aerospace Education & Research

This study evaluated the effectiveness of tactile cueing integrated into a pilot’s headset on pilot altitude control during simulated instrument conditions. Pilots typically rely on visual and auditory inputs to maintain situational awareness, but in high-workload or instrument meteorological conditions (IMC), these channels can become overloaded. One underutilized alternative for alerting is a tactile cueing apparatus. Using an X-Plane simulation of a Piper Archer equipped with a G-1000 avionics suite, 39 FAA-certified pilots flew two precision approaches. The experimental group (n = 20) received haptic cues via ear seal-embedded tactors when deviating from assigned altitude or glideslope. The control group …

The Effect Of Chamber Geometry On The Performance Of Oscillating Water Column, Timilehin O. Osunade

College of Graduate Studies: Theses & Dissertations

This thesis investigates the effect of internal chamber geometry on the performance of a piezoelectric oscillating water column (OWC) wave energy harvester. Four acrylic chamber configurations with internal top-surface angles of 0°, 30°, 45°, and 60° were tested under 32 controlled conditions combining synchronous (SYN) and asynchronous (ASC) forcing at input voltages of 4, 6, 8, and 10 V. A 35 mm piezoelectric disc mounted at the chamber roof served as the power take-off element and, subject to the RC-limit caveat disclosed in Section 3.2.1, as a first-order dynamic analogue of the chamber pressure for phase-based compressibility analysis. All test …

Towards Optimal And Resilient Ac/Dc Microgrids: Control Design, Analysis, And Implementation, Jun Zhang

Electronic Theses and Dissertations

Microgrids serve as a small-scale power grid for utilizing renewable energy to enhance energy reliability, sustainability, and resilience. As an autonomous system, an islanded microgrid can disconnect from the utility grid and operate independently by maintaining system voltage and frequency. However, this new feature introduces coordination problems among distributed generators (DGs), such as 1) how to make sure the voltage profile and current sharing in DC microgrid with different types of converters; 2) how to reduce the impact of cyberattack when the system coordination is performed based on communication, and 3) how to calculate the steady state under a droop …

Secure Peer-To-Peer Messaging Using Distributed Servers, Jack Stoller

Williams Honors College, Honors Research Projects

Traditional messaging systems that rely on centralized infrastructure often introduce three security vulnerabilities: single points of failure susceptible to availability attacks, metadata leakage, and man-in-the-middle attacks.

This project designs, implements, and validates a distributed peer-to-peer messaging system that addresses each of these concerns through architectural design. A consistent hash ring is used with virtual nodes to distribute user data across a mesh of connected nodes, eliminating centralized dependency on any single server. Message contents travel directly between browser clients over a WebRTC data channel secured with end-to-end DTLS encryption, bypassing the server infrastructure. Inter-node communication is protected by mutual TLS …

Brrbox, Shawn J. Myers, Lane Cline, Michael Davis, Christian Secrest

Williams Honors College, Honors Research Projects

This report details the project known as “The BRRBOX”, a reusable, insulated thermoelectric cooler developed to keep internal temperatures at refrigeration levels or cooler for at least 48 hours. The cooler will track its internal temperature during this period and be able to give the data at the end of its delivery cycle to keep up with food and pharmaceutical standards during delivery. The BRRBOX uses Peltier-based cooling alongside vacuum insulation panels and fans to achieve efficient thermal control. An onboard microcontroller will monitor temperature, record the data, and adjust the cooling output to minimize power consumption. The box will …

Automated Pill Dispenser, Ryan Oderkirk, Connor Beaven, Rachelle Labrie, Josue Panchana

Williams Honors College, Honors Research Projects

The project we propose is an automated system for dispensing dosages of medication throughout the day. It will be able to alert a user when their pills need to be taken and give them the correct dosages of up to four different medications. These dosages are configurable as well as the scheduled time they are to be taken. In addition, the pill dispenser will alert users when they are low on medications and need to refill the machine.

Automated Soil Resetting System For Extraterrestrial Regolith Simulation, Parker W. Brennan, Anthony C. Daniels

Williams Honors College, Honors Research Projects

This project focuses on designing an automated soil resetting system for extraterrestrial regolith simulation. The system will prepare a regolith simulant testbed to a desired, repeatable density, enabling reliable wheel–terrain testing for planetary rover research. Manual soil preparation currently exposes testers to hazardous particulates and produces inconsistent results.

The proposed system will integrate mechanical and control elements to reset the soil bed safely and efficiently. A combination of raking and vibrational methods will be explored, with feedback sensors and automation to achieve target density control. The research will proceed through literature review, benchtop experimentation, prototype design, and full-scale testing over …

Adjustable Car-Camping Bed Frame, Zachary Lamonica, Mitchell Mcgrath

Williams Honors College, Honors Research Projects

This project explores an innovative camping solution designed to enhance mobility, comfort, and accessibility for outdoor enthusiasts. The first is the Adjustable Car-Camping Bed Frame, engineered to be lightweight, collapsible, and adjustable to various vehicle interiors. It prioritizes ease of setup, compact storage, reliability, and affordability, enabling convenient travel without sacrificing comfort. The design aims to simplify camping while maintaining durability. As an aerospace systems engineering student, I will apply systems engineering to the Bed Frame, using aerospace software and principles. The scope includes research, design, prototyping, and testing, with a focus on real-world usability and environmental adaptability. Additionally, my …

Automatic Pet Feeder Network, Daniel J. Herttna, David A. Bechtel, Alexander Deskovich

Williams Honors College, Honors Research Projects

This project will describe the design process and research behind the Automatic Pet Feeder Network, otherwise known as The Petwork. The system consists of a tank to hold the food, a latching system to drop the food at the desired time, a weight sensor to verify that the proper amount of food has been dispensed, a power supply unit that steps down 120V AC standard wall outlet power, & a microcontroller that will interpret the user's input from a mobile phone application. The networking portion is covered by having a primary and a secondary feeder. The mobile application will communicate …

Development Of A Hypersonic Aerodynamic Analysis Methodology For Conceptual Design, Stephen Atkins

Mechanical and Aerospace Engineering Theses

This research promotes the advancement of the Aerospace Vehicle Design Synthesis (AVDS) system through the development of a low order numerical hypersonic aerodynamic analysis methodology. The AVDS methodology outlines how to utilize disciplinary tools and relies on the careful selection or development of those tools to carry out the aerospace vehicle sizing and evaluation processes. An overview of the aerodynamic analysis process from both industrial and academic perspectives is presented to provide context for the present work. The different philosophies of design are discussed insofar as they dictate how aerodynamic tools are used in the design process. Next, a literature …

Analyzing A Benchtop Model Of Combined Heat Power To An Industrial Scale, Chase Steven Carlton, Ashley Leach, Andrew Martin-Biggs, Tessa Wilker

UNH URC Open (2026 and after)

Analyzing a Benchtop Model of Combined Heat Power to an Industrial Scale

A Three-Stage Causal Root-Cause Diagnostic Protocol For Nonstationary Industrial Time Series Data, Cansu Yalim, Resit Unal, Holly A. H. Handley

Engineering Management & Systems Engineering Faculty Publications

Predictive maintenance (PdM) systems effectively forecast failures, but they often fail to find root causes, particularly when system dynamics change over time. This limitation arises from applying static causal models or decoupled segmentation to handle nonstationary industrial time series. For regime-aware causal diagnostics and interventional effect estimation, we introduce a three-stage time-varying dynamic Bayesian network (TV-DBN) protocol. Using a minimum description length (MDL) objective that connects segmentation to mechanism changes, Stage I jointly infers change points and regime-specific graph structure. Stage II produces a completed partially directed acyclic graph (DAG) by orienting edges within each regime using a combination of …

Evaluating High-Strength Steel Welded Connections For Future Aws Welding Standards, Parker Minter

2026 Research Poster Competition

Welding plays a critical role in many civil engineering applications as it is a common method used to connect structural steel components. Because of how widespread the practice is, the American Welding Society (AWS) has developed a set of standardized welding guidelines to ensure consistent quality in structural welds. These standards allow common weld types to be fabricated using pre-approved procedures (e.g. welding materials, temperatures, and positions). Recently, high-strength structural steels have begun to be available domestically. Current AWS standards do not allow for high strength steels (yield strength greater than 80ksi) and need to be evaluated for the inclusion …

Unmanned Aircraft Vehicle Safety Reporting And Analysis Of Incidents Utilizing Machine Learning, Cody Harrison

2026 Research Poster Competition

Unmanned Aerial Vehicles (UAVs) are rapidly evolving and being integrated into a wide range of applications, from commercial deliveries to police surveillance and recreational use. As UAVs become more prevalent, the complexity of operations and potential for incidents or accidents will continue to increase. Understanding why these incidents and accidents occur is critical to ensure safe and reliable drone operations as the industry continues to grow. To combat these issues, it is invaluable to analyze UAV incidents quantifiably to identify leading causes and risks in a streamlined and efficient matter. Current manual reporting systems often struggle with the sheer volume …

How Do Different Flight Training Programs Impact Pilot Proficiency?, Abigail Henson

2026 Research Poster Competition

The Federal Aviation Administration (FAA), founded in 1958, ensures safe and efficient use of national airspace by regulating aircraft and pilot certification, setting standards for airports, and managing the National Airspace System. One such regulation is in the certification process for aspiring student pilots. Students who want to obtain their private pilots license can do so by picking either a Part 61 or Part 141 flight school. While both lead to the same certification, these two options differ significantly in terms of structure; Part 61 programs offer flexibility with their individualized approach and fewer requirements while Part 141 schools follow …

Analysis Of Loss Of Engine Power Events In General Aviation, Saloni Satappagol

2026 Research Poster Competition

Among different parts of aviation, general aviation (GA) stands out as one of its largest and most vital sectors. GA is defined as any civil aviation activity excluding scheduled commercial flights and military operations. While loss of engine power is a serious subset of general aviation accidents, accounting for more than 200 fatal accidents per year, several gaps remain in our current understanding of these accidents. While current literature includes older studies from 2000-2014, new data from the past decade have not been analyzed for trends yet. With this significant gap of more than a decade in understanding, it is …

Monitoring Eye Movements To Assess The Impact Of Sensory Feedback On Cognitive Workload During Myoelectric Prosthetic Hand Use, Naomi Tchoungang, Hailey Dirrigl, Justin Asbee

2026 Research Poster Competition

Modern prosthetic hands allow users to grasp and manipulate objects, but many users must constantly watch the device to complete even simple tasks. This heavy reliance on vision increases cognitive effort, slows movement, and makes prosthetic use feel less natural. An important question in prosthetics research is whether providing sensory feedback (enabling users to feel what the prosthetic hand is doing) can reduce this cognitive load and improve performance. In this study, sensory feedback refers to a system that provides clear tactile cues to the user upon contact between the prosthetic hand and an object, helping replace information normally felt …

Assessing Mesenchymal Stem Cell Phenotype After Heparan Sulfate Supplementation, Isani Patel

2026 Research Poster Competition

Multiple sclerosis is an autoimmune disease that damages the protective coating of nerves, often causing lasting neurological symptoms. Current treatments slow disease activity but rarely repair existing damage. In response to this, a novel treatment option has emerged: mesenchymal stem cell (MSC) therapy. MSCs are cells found in different adult tissues like bone marrow, and they have the potential to release repair-supporting signals and moderate inflammation. Nevertheless, results in a clinical setting have been inconsistent due to variations in cell potency. As a potential strategy to enhance MSC therapeutic potential, the addition of heparan sulfate, a naturally occurring signaling molecule, …

Cardiovascular Monitoring For Maternal Health Using Wearable Devices, Daniela Alejandra Vasquez

2026 Research Poster Competition

Cardiovascular disease represents the leading cause of pregnancy-related mortality in the United States, accounting for over 30% of maternal deaths, with preeclampsia and hypertensive disorders contributing significantly to this burden. In Arkansas, maternal mortality rates reach 41.9 deaths per 100,000 live births. Current prenatal care relies on intermittent office-based blood pressure measurements conducted during 12-14 clinical visits, may not capture critical cardiovascular changes in a timely manner. Preeclampsia is characterized by new-onset hypertension after 20 weeks of gestation, affects 3-7% of pregnancies, and requires early detection to enable timely intervention. The limited accessibility of ambulatory blood pressure monitoring in rural …

Uav-Based Sensor Integration For In-Situ Lake Water Quality Monitoring, Alec Campbell

2026 Research Poster Competition

Current water quality assessment methods rely heavily on manual sampling and laboratory analysis, which are time-consuming and difficult to perform in remote or hazardous environments. In surface water monitoring, spatial and temporal resolution is often constrained by labor, access, and logistical limitations of manual sampling programs. This research aims to develop a drone-based system for real-time, in situ lake water quality monitoring. To address these challenges, the project focuses on integrating multiple water quality sensors, including oxidation-reduction potential (ORP), pH, electrical conductivity (EC), turbidity, and a multispectral spectrometer, into a compact, UAV-compatible design capable of collecting spatially referenced data. Methods: …

Enhancing Prosthetic Hand Training Through A Virtual Reality–Based Framework Integrated With The Coapt Control System., Iruoghene Ojoh

2026 Research Poster Competition

Enhancing Prosthetic Hand Training Through a Virtual Reality–Based Framework  Integrated with the Coapt Control System. Ojoh, I.1,2, Shell, A.1,  Asbee, J.1, Aguilar, D.1 ,Abbas, J.1,2,   1Institute for Integrative and Innovative Research, University of Arkansas, Fayetteville, AR;  2Department of Biomedical Engineering, University of Arkansas, Fayetteville, AR  Introduction: Advances in upper-limb prosthetic hardware have greatly improved strength, durability, and mechanical performance; however, achieving intuitive control of EMG-based myoelectric prosthetic hands remains a significant challenge for individuals with trans-radial amputations. These devices rely on electromyography (EMG) signals generated by residual forearm muscles, which require consistent and well-coordinated muscle activation. Many users experience difficulty …

A Probabilistic Approach To Multiscale Simulation: Evaluating Machine-Learned Backmapping Models Of Diphenylalanine, Sage Paschall

2026 Research Poster Competition

Diphenylalanine (FF) has demonstrated the tendency to form several nanostructures, a subset of which are electrically conductive and have exciting potential applications in biotechnology and nanoelectronics. However, the exact mechanisms underlying this self-assembly process remain largely ambiguous. Atomistic-scale molecular dynamics (MD) simulations allow for the evaluation of atomic-level interactions crucial in understanding the driving thermodynamic forces behind self-assembly, but are too computationally expensive to span the necessary timescale to observe the self-assembly process in action. Coarse-grained (CG) models allow for simulation at the appropriate timescale but come at the cost of vital atomistic detail. It is therefore important to develop …

Testing The Effects Of Mechanical Stimulation On Mesenchymal Stem Cell Cultures, Ella Collis

2026 Research Poster Competition

Mesenchymal stem cells (MSCs) are a promising treatment option for a variety of diseases due to their ability to migrate to far-off sites, modulate inflammatory immune responses, secrete factors that aid in tissue healing, and their capacity to become several cell types. These cells can be found and isolated from various body tissues including bone marrow and adipose tissue, even so the number of cells obtained from these tissues is minimal compared to the amounts needed for their transplantation in cell therapy treatments. Therefore, their culture in plastic dishes is required to increase the number of cells and obtain the …