Engineering Commons^™

A Wirelessly Controlled Scalable 3d-Printed Microsystem For Drug Delivery, Farzad Forouzandeh, Nuzhet N. Ahamed, Xiaoxia Zhu, Parveen Bazard, Krittika Goyal, Joseph P. Walton, Robert D. Frisina, David A. Borkholder

Chemical and Biochemical Engineering Faculty Research & Creative Works

Here we present a 3D-printed, wirelessly controlled microsystem for drug delivery, comprising a refillable micro reservoir and a phase-change peristaltic micropump. The micropump structure was inkjet-printed on the back of a printed circuit board around a catheter microtubing. The enclosure of the microsystem was fabricated using stereolithography 3D printing, with an embedded micro reservoir structure and integrated micropump. In one configuration, the microsystem was optimized for murine inner ear drug delivery with an overall size of 19 x 13 x 3 mm3. Benchtop results confirmed the performance of the device for reliable drug delivery. The suitability of the device for …

Roles Of Key Ion Channels And Transport Proteins In Age-Related Hearing Loss, Parveen Bazard, Robert D. Frisina, Alejandro A. Acosta, Sneha Dasgupta, Mark A. Bauer, Xiaoxia Zhu, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

The auditory system is a fascinating sensory organ that overall, converts sound signals to electrical signals of the nervous system. Initially, sound energy is converted to mechanical energy via amplification processes in the middle ear, followed by transduction of mechanical movements of the oval window into electrochemical signals in the cochlear hair cells, and finally, neural signals travel to the central auditory system, via the auditory division of the 8th cranial nerve. The majority of people above 60 years have some form of age-related hearing loss, also known as presbycusis. However, the biological mechanisms of presbycusis are complex and not …

Single Step 2-Port Device De-Embedding Algorithm For Fixture-Dut-Fixture Network Assembly, Simone Scafati, Enza Pellegrino, Francesco De Paulis, Carlo Olivieri, James L. Drewniak, Antonio Orlandi

Electrical and Computer Engineering Faculty Research & Creative Works

The de-embedding of measurement fixtures is relevant for an accurate experimental characterization of radio frequency and digital electronic devices. The standard technique consists in removing the effects of the measurement fixtures by the calculation of the transfer scattering parameters (T-parameters) from the available measured (or simulated) global scattering parameters (S-parameters). The standard de-embedding is achieved by a multiple steps process, involving the S-to-T and subsequent T-to-S parameter conversion. In a typical measurement setup, two fixtures are usually placed before and after the device under test (DUT) allowing the connection of the device to the calibrated vector network analyzer coaxial ports. …

Virus And Bacteria Inactivation Using Ultraviolet Light-Emitting Diodes, Vincent Martino, Kyra Oschsner, Paige Elyse Peters, Daniel Zitomer, Brooke K. Mayer

Civil and Environmental Engineering Faculty Research and Publications

The control of infectious diseases is a critical challenge in developing and developed nations alike. Humans can be exposed to pathogenic microorganisms such as viruses and bacteria through numerous routes of transmission, including waterborne transmission. Accordingly, effective water disinfection processes are paramount for public health protection. In this study, the inactivation efficacy of P22 virus and Escherichia coli bacteria was tested using ultraviolet light-emitting diodes (UV LEDs), which provided effective disinfection of both waterborne microorganisms. Using a peak wavelength emission of 255, 265, or 285 nm, the batch-test, UV LED collimated beam system demonstrated high inactivation potential for both microorganisms …

Ai Alzheimer's Early Detection Via Mri Processing, Luke Frey, Siddharth Sharma, Arti Jain

Electrical Engineering

Alzheimer’s Disease (AD) is an irreversible, progressive brain disorder that impairs memory, thinking, and language. Known as the most common form of dementia, AD is the 6th leading cause of death in the United States. It is estimated that currently, nearly 6 million Americans suffer from AD and moreover, the prevalence of AD is projected to grow to 13.8 million being diagnosed by 2050. Considering these projections, hospitals are expected to be diagnosing nearly half a million patients a year. This high volume will lead to technological growth within the diagnosis process along with more effective treatments.

As of now, …

Survey And Design Of Microwave Low-Noise Amplifiers, Omri Yaari, Pavin Virdee

Electrical Engineering

This project is a contest entry in the Wide In-band Receiver area of the 2020 International Microwave Symposium, 5G Low Noise Amplifier Competition [1]. The project includes RF transistor selection, single, two-stage, and cascode models, and RF parameter optimization to maximize the IMS Competition figure of merit along with a supplemental figure of merit [2]. 5G technologies (used in cellphones, IoT, etc.), first introduced in 2018, are on the rise in current society. Fifth generation hardware requires extended capabilities in comparison to 4G (5-20MHz bandwidth EU: 0.6-2.6GHz), including the newly allocated sub 6GHz frequency bands (EU: 3.4-3.8GHz) and wider bandwidth …

Solar Pv Emulator, Tristan Studer, Cody Kremer

Electrical Engineering

The implementation of a solar PV emulator. Creating a controllable testing environment which sufficiently recreates realistic conditions a photovoltaic cell would experience in real world use. The project aims to accurately show the efficiency and reliability of a solar PV cell, opposed to an ideal model which creates unrealistic expectations. The PV emulator implements conditions such as: irradiance, soiling and temperate changes. It gives feedback on a displayed IV curve and/or PV curve so the user may graphically analyze the output their PV cell produces given various conditions. It allows the user selectable conditions the solar cell may experience this …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …

Optimization Of Single Axis Tracker Settings In The Cal Poly Goldtree Solar Farm, Charles A. Studdard, Liliana Reyes

Electrical Engineering

Solar farms use direct sunlight when operating; additionally, solar modules produce the most energy aligned perpendicular to the sun. Single axis solar tracking systems allow the rotation tilted photovoltaic panels to rotate during the day, maintaining the panels at the utmost efficiency angle. Achieving maximum power generation and reducing shade on the panels, make it crucial to have constant optimum positioning. Larger farms contain multiple rows and columns leading the panels to cast shadows on one another. Backtracking happens when you eliminate or reduce shadow casted on panels from adjacent modules. Panels positioned equidistantly and on even terrain allows backtracking …

Led-Based Solar Simulator, Jonathan E. Honrada

Electrical Engineering

Solar simulators are great laboratory tools that help users conduct tests with solar cells indoors. Conventional solar simulators typically use xenon arc bulbs as a light source, which can have considerable disadvantages. Recent projects have sought to design and implement LED-based solar simulators, as they are more power-efficient, inexpensive, and durable.

Based on these advantages, the goal of this project is to create an LED-based solar simulator that can replicate the characteristics of solar light, but also be tunable with controls. This broadens the testing capabilities of the device, allowing users to conduct tests with more narrow spectrums of light …

2021 Department Of Energy Collegiate Wind Competition Electrical System, Grayson Capers, Shane Alayvilla, Justin Rodrigues

Electrical Engineering

In this work, the implementation of the electrical system for Cal Poly’s 2021 Department of Energy Collegiate Wind Competition turbine is described. The mission of this project was to complete the turbine testing tasks to the best of the team’s ability. This system includes an off the shelf slotless permanent magnet synchronous generator and rectifier to produce a DC voltage. To maximize the power output at below-rated wind speeds, current sensors, voltage sensors, and a dynamic load with variable resistance were designed and tested. To curtail the power and rotor speed in high wind events, the turbine was equipped with …

Hybrid Ac/Dc House, Vinh Q. Tran, Casey Winans, Erin O'Rourke

Electrical Engineering

The Hybrid AC/DC house is a proof of concept implementing a DC bus in residential power systems. The implementation of the DC bus is motivated by efficiency through a direct path for DC sources and loads. The avoidance of DC-to-AC and AC-to-DC conversions used in typical residential systems especially those with DC sources such as solar panels could experience higher efficiencies through only DC-to-DC conversions between the sources and the loads.

Bi-Directional Kerr-Lens Mode-Locked Titanium Sapphire Laser, Ricky Arnold, Stratos Koutroulis, Dylan Meyer

Mechanical Engineering Senior Theses

Precision near-infrared absorption spectroscopy is a highly desired scientific method, but the blooming technology has not yet come to fruition. Field deployments are limited, and some methods come with limitations that hamper the viability. The laser cavity completed for this thesis project is a single cavity Dual Comb Spectroscopy laser, which improves myriad limiting characteristics of previous lasers in this application. Crucially, it can produce two simultaneous pulse trains with unique repetition rates. The laser cavity has been designed, built, and aligned for improved stability, including vibrational, noise, and thermal control. The design, analysis, and results of a dual comb …

Enhance Portable Radiograph For Fast And High Accurate Covid-19 Monitoring, Ngan Le, James Sorensen, Toan Bui, Arabinda Choudhary, Khoa Luu, Hien Nguyen

Computer Science and Computer Engineering Faculty Publications and Presentations

This work aimed to assist physicians by improving their speed and diagnostic accuracy when interpreting portable CXRs as well as monitoring the treatment process to see whether a patient is improving or deteriorating with treatment. These objectives are in especially high demand in the setting of the ongoing COVID-19 pandemic. With the recent progress in the development of artificial intelligence (AI), we introduce new deep learning frameworks to align and enhance the quality of portable CXRs to be more consistent, and to more closely match higher quality conventional CXRs. These enhanced portable CXRs can then help the doctors provide faster …

Toward Cost-Effective Residential Energy Reduction And Community Impacts: A Data-Based Machine Learning Approach, Adel Naji, Badr Al Tarhuni, Jun-Ki Choi, Salahaldin Alshatshati, Seraj Ajena

Mechanical and Aerospace Engineering Faculty Publications

Many U.S. utilities incentivize residential energy reduction through rebates, often in response to state mandates for energy reduction or from a desire to reduce demand to mitigate the need to grow generating assets. The assumption built into incentive programs is that the least efficient residences will be more likely take advantage of the rebates. This, however, is not always the case. The main goal of this study was to determine the potential for prioritized incentivization, i.e., prioritizing incentives that deliver the greatest energy savings per investment through an entire community. It uses a data mining approach that leverages known building …

Adjustable Head Tube Angle Headset, Glenn Petersen, Ben Harper, Josh Martin, Dylan Prins

Mechanical Engineering

This final design review report describes the design, manufacture, and test process of a bicycle headset capable of quickly and easily adjusting the effective head tube angle. The evolution of mountain bike geometry has forced bike designers to compromise between climbing and descending performance when choosing a head tube angle. A headset capable of quickly adjusting the effective head tube angle would allow riders to optimize their bike’s geometry for different stages of riding. This report details the research, idea generation, concept development and selection, design, manufacturing, and testing of our adjustable head tube angle headset.

Agent-Based Semantic Role Mining For Intelligent Access Control In Multi-Domain Collaborative Applications Of Smart Cities, Rubina Ghazal, Ahmad Kamran Malik, Basit Raza, Nauman Qadeer, Nafees Qamar, Sajal Bhatia

School of Computer Science & Engineering Faculty Publications

Significance and popularity of Role-Based Access Control (RBAC) is inevitable; however, its application is highly challenging in multi-domain collaborative smart city environments. The reason is its limitations in adapting the dynamically changing information of users, tasks, access policies and resources in such applications. It also does not incorporate semantically meaningful business roles, which could have a diverse impact upon access decisions in such multi-domain collaborative business environments. We propose an Intelligent Role-based Access Control (I-RBAC) model that uses intelligent software agents for achieving intelligent access control in such highly dynamic multi-domain environments. The novelty of this model lies in using …

Flywheel Fanny Pack Balance Assist, Ella Joy Mahood, Jason Scott Provol, Raymond Ming Tseng

Biomedical Engineering

The aim of this project is to develop a wearable device that will provide support to a balance impaired individual. The device will be predicated on the principle of gyroscopes. It will include a rapidly spinning flywheel, which will resist any changes to spatial orientation.

Adjustable Height Pedestal Grinder Stand, Josef Zagorski, Zachary Wedel, Michael Sitar, Daniel Zevenbergen

Mechanical Engineering

Pedestal grinders are one of the most common machines found in machine shops today. The current industry standard for mounting a grinder is on a fixed single pillar, cast iron pedestal. A fixed pedestal allows for no vertical adjustment for shop users of different sizes and is a safety hazard. This report further defines this problem and proposes an iterative design process to meet the needs and wants of the customer. The adjustable-height pedestal grinder stand Senior Project team used this problem and design process to successfully complete the project within the allotted time. The first major deliverable and milestone …

Standardizing 1ru Chassis To Pcba Interfaces, Bryce J. Mcneil, Leia K. Tashiro, John H. Liu, Sarika L. Singhal

Mechanical Engineering

Cisco currently designs a variety of custom chassis for different types of servers, routers, and switches. Our senior design project aims to reduce the number of custom chassis Cisco develops by standardizing the perimeter mounting locations for the printed circuit board assembly on the chassis. The purpose of this report is to document our selected project direction and support the decisions with appropriate evidence. In addition to research on the customer’s needs, the product, and the technical background used to understand the project scope, our group has come up with a way to analyze and compare mounting locations for various …

Bicycle Headset With Adjustable Spring Rate, Andrew W. Drees, Jonah Masumoto, Camden R.S. Boshart, Matthew B. Mounteer

Mechanical Engineering

Fork flop can play an important role in the performance of a mountain bike. This phenomenon of fork flop is known as the tendency that the front wheel of a bike wants to flop over to one side when moving slowly. The fork flop experienced on a bicycle changes with the geometry of the bike, but our team sought to change the fork flop experienced through an adjustable internal spring design that attaches to the bicycle instead. From our research, we decided to utilize torsion springs as the method for mitigating fork flop. We also decided to use load cells …

Sourceamerica Design Challenge Accessible Kitting And Packaging Station, Christopher Wijaya Tan, Keanau Rick Robin, Kyle Huawei Chuang, Ashley Humpal

Mechanical Engineering

This document entails our research, design, proposed development, and testing process for solving the 2020 SourceAmerica collegiate design challenge. Our team, “Just Kitting”, is composed of four Mechanical Engineering students from California Polytechnic San Luis Obispo. The design challenge requires us to create a device that will help improve the quality of life and productivity of people with disabilities working in the kitting and packaging industry. This document includes our background research and information received from various interviews with our sponsor and others who have experience working with disabilities. Using this information, we refined our problem statement to focus on …

Tensile Testing Environmental Chamber – Structural, Michael Ingel, Erik Soldenwagner, Austin Marshall, Lauren Schirle

Mechanical Engineering

Environmental chambers for tensile testing machines are used to study how a multitude of materials behave in extreme temperatures. These chambers provide the necessary information to innovate cutting edge technology for materials in fields such as aerospace. These chambers are often heavy and expensive requiring a significant amount of time and money just in the installation process alone. This report will serve to outline and define the design and fabrication of an environmental chamber, conducted by a team of four senior mechanical engineering students at California Polytechnic State University, San Luis Obispo. The goals of the project include a low-weight …

3-Axis Reaction Wheel System For Cubesats, Alexandra Mae Lee, Daniel Leon, Christopher Pablo Casillas, Rose Mccarver

Mechanical Engineering

Reaction wheels are a common, but expensive, component used in CubeSats, that can accurately position a satellite using an imparted momentum (or impulse) from a rotating flywheel to adjust a satellite’s attitude. This document serves as the final design review and report for the 3-Axis Reaction Wheel Senior Design Project in the Mechanical Engineering Department of California Polytechnic State University, San Luis Obispo. The goal of this project is to produce a functional, low-cost 3-axis reaction wheel system based on previous research done by a master’s student at Cal Poly to be implemented in future CubeSats in the Cal Poly …

Blds Pressure Belt, Hailey Earnest, Sean Casteel, Benjamin Bons, Biren Rama

Mechanical Engineering

Dr. Westphal has a Boundary Layer Data System (BLDS) that is used to take pressure measurements on the surface of the aircraft. Our team has created a design and manufacturing method for producing the corresponding pressure belt that attaches to Dr. Westphal's system to obtain pressure data.

Cal Poly Wind Power: Wind Turbine Prototype, Sophie A. Spencer, Maggie Nevrly, Michael Reyna, Loi Q. Nguyen

Mechanical Engineering

The Cal Poly Wind Power (CPWP) club is competing in the Collegiate Wind Competition (CWC) hosted by the National Renewable Energy Laboratory (NREL). The CWC is hosted annually by NREL to increase the number of skilled workers prepared to work in the wind energy industry. Our senior project team is one of several design teams contributing to the CPWP prototype turbine design including the pitching mechanism, blade design, generator, and shaft. The scope of this project is to design the yaw mechanism, tower, and nacelle. The goal is to create components that function well with other planned components and are …

Adaptive Vehicle Control, Brian L. Finger, Maria Vargas, Jacob T. Larson, Christopher J. Villa

Mechanical Engineering

This report presents the final design for our device made for Mrs. Laura Jagels. Mrs. Jagels, who has an above the knee amputation, needed a device that would allow her to operate a manual car in a safe and reliable way that still gives her the traditional driving experience. This report takes into consideration the shortcomings of current market devices that enable amputees to operate vehicles. From this research and through interviews with Mrs. Jagels, we were able to decide on our device specifications, giving us a basis to objectively evaluate designs. Ideation and concept prototype building was performed for …

Controlling Locomotion Of A Robotic Leg, Tai K. Mitchell, Connor Bush, Patrick Ward, Ben Spin

Mechanical Engineering

Dr. Xing and Professor Refvem are working to research and develop a quadruped robot that is capable of basic movements including walking, running, and jumping. As senior project group F-11, we are joining a team of engineers to assist in the development of the quadruped. Our team was tasked with creating a mathematical model, designing a control method, and implementing that control method for the quadruped's legs in Simulink. This will allow both current and future students to understand the response of the system and provide a building point for future researchers to create working quadrupedal robots. This report documents …

Saver (Surface Autonomous Vehicle For Emergency Rescue), Tyler Jorgensen, Ethan Miller, Josephine Isaacson, Joshua Hoye

Mechanical Engineering

This document serves to introduce the design team and their competition challenge, as well as to detail the results of the project. The original design challenge was the NASA Micro-g NExT’s SAVER (Surface Autonomous Vehicle for Emergency Rescue) competition; we were tasked with developing a self-driving water vehicle capable of delivering supplies to Orion astronauts separated from the rest of their crew in the case of a maritime emergency. However, we were not selected to go forward in this competition and thus we decided to scale down the size of the SAVER device to shift the focus of the project …

Vibration Isolation For Scanning Tunneling Microscope, Seth Ewing, Ryan Mcmullen, Jason Behrens, Stephen Deherrera

Mechanical Engineering

Scanning Tunneling Microscopy (STM) works by scanning a fine metal wire over a conductive sample in order to image samples on the atomic level. The microscope uses a feedback loop with a PID controller to maintain a constant tunneling current between the sample and the tip. In order to obtain clear imaging at the atomic level, the microscope and the sample need to be isolated from external vibrations in a vacuum chamber. The scope for this project is to build and test a single-stage vibration isolation system that effectively attenuates the amplitude of external vibrations acting on the microscope. This …