Engineering Commons^™

Stem For All Showcase Report, Bruce G. Bukiet, James M. Lipuma

STEM Month

This article and the associated STEM for all showcase submission video (https://www.youtube.com/watch?v=Clps427rdDc) was presented at the NSF 2021 STEM FOR ALL COVID, Equity & Social Justice Conference, May 11-18.

This article provides a description of the development of the STEM in your Home project in the STEM for Success initiative.

Unconventional Van Der Waals Heterostructures Beyond Stacking, Peter Sutter, Eli A. Sutter

Department of Electrical and Computer Engineering: Faculty Publications

Two-dimensional crystals provide exceptional opportunities for integrating dissimilar materials and forming interfaces where distinct properties and phenomena emerge. To date, research has focused on two basic heterostructure types: vertical van der Waals stacks and laterally joined monolayer crystals with in-plane line interfaces. Much more diverse architectures and interface configurations can be realized in the few-layer and multilayer regime, and if mechanical stacking and single-layer growth are replaced by processes taking advantage of self-organization, conversions between polymorphs, phase separation, strain effects, and shaping into the third dimension. Here, we highlight such opportunities for engineering heterostructures, focusing on group IV chalcogenides, a …

3d Printed Concrete & Polymer Concrete For Infrastructure Applications, Daniel Heras Murcia

Civil Engineering ETDs

Additive manufacturing technology has been established as one of the fastest-growing building technologies worldwide. Three-dimensional concrete printing (3DCP) has developed an increasing interest in the last decade due to its prospects as a transformative technology for industries such as the concrete precast. Besides the improvements in automation technologies in construction, traditional construction has faced considerable challenges: high accident rates, labor dependency, significant potential for automation, and high costs associated with the use of traditional formwork. In this context, three-dimensional concrete, also referred to as physical prototyping, is a novel construction technique in which the concrete is extruded layer-to-layer. 3DCP is …

Computer-Aided Diagnosis Of Low Grade Endometrial Stromal Sarcoma (Lgess), Xinxin Yang, Mark Stamp

Faculty Research, Scholarly, and Creative Activity

Low grade endometrial stromal sarcoma (LGESS) accounts for about 0.2% of all uterine cancer cases. Approximately 75% of LGESS patients are initially misdiagnosed with leiomyoma, which is a type of benign tumor, also known as fibroids. In this research, uterine tissue biopsy images of potential LGESS patients are preprocessed using segmentation and stain normalization algorithms. We then apply a variety of classic machine learning and advanced deep learning models to classify tissue images as either benign or cancerous. For the classic techniques considered, the highest classification accuracy we attain is about 0.85, while our best deep learning model achieves an …

Human-Machine Communication: Complete Volume. Volume 3. Diffusion Of Human-Machine Communication During And After The Covid-19 Pandemic

Human-Machine Communication

This is the complete volume of HMC Volume 3. Diffusion of Human-Machine Communication During and After the COVID-19 Pandemic

What Will Affect The Diffusion Of Ai Agents?, James W. Dearing

Human-Machine Communication

For billions of people, the threat of the Novel Coronavirus SARS-CoV-2 and its variants has precipitated the adoption of new behaviors. Pandemics are radical events that disrupt the gradual course of societal change, offering the possibility that some rapidly adopted innovations will persist in use past the time period of the event and, thus, diffuse more rapidly than in the absence of such an event. Human-machine communication includes a range of technologies with which many of us have quickly become more familiar due to stay-athome orders, distancing, workplace closures, remote instruction, home-bound entertainment, fear of contracting COVID-19, and boredom. In …

The Role Of Vidura Chatbot In The Diffusion Of Knowcovid-19 Gateway, Kerk F. Kee, Prasad P. Calyam, Hariharan Regunath

Human-Machine Communication

The COVID-19 pandemic is an unprecedented global emergency. Clinicians and medical researchers are suddenly thrown into a situation where they need to keep up with the latest and best evidence for decision-making at work in order to save lives and develop solutions for COVID-19 treatments and preventions. However, a challenge is the overwhelming numbers of online publications with a wide range of quality. We explain a science gateway platform designed to help users to filter the overwhelming amount of literature efficiently (with speed) and effectively (with quality), to find answers to their scientific questions. It is equipped with a chatbot …

Communicative Development And Diffusion Of Humanoid Ai Robots For The Post-Pandemic Health Care System, Do Kyun David Kim, Gary Kreps, Rukhsana Ahmed

Human-Machine Communication

As humanoid robot technology, anthropomorphized by artificial intelligence (AI), has rapidly advanced to introduce more human-resembling automated robots that can communicate, interact, and work like humans, we have begun to expect active interactions with Humanoid AI Robots (HAIRs) in the near future. Coupled with the HAIR technology development, the COVID-19 pandemic triggered our interest in using health care robots with many substantial advantages that overcome critical human vulnerabilities against the strong infectious COVID-19 virus. Recognizing the tremendous potential for the active application of HAIRs, this article explores feasible ways to implement HAIRs in health care and patient services and suggests …

Our Future Arrived: Diffusion Of Human-Machine Communication And Transformation Of The World For The Post-Pandemic Era, Do Kyun David Kim, Gary Kreps, Rukhsana Ahmed

Human-Machine Communication

The world is getting into a new phase in history. For the first time, humans are verbally communicating and developing meaningful relationships with non-living objects. AI is a wormhole to open a gateway to the new world, and the COVID-19 pandemic prepared the world to transform its system to be an open system that responds to, communicates with, and utilizes the remnants coming out of the wormhole of the new world. Now, we urgently need to create a holistic discourse on how we can recognize, develop, or shape the identities of communicable machines as people develop a partnership with them. …

Perspectives On Computing Ethics: A Multi-Stakeholder Analysis, Damian Gordon, Ioannis Stavrakakis, Paul J. Gibson, Brendan Tierney, Anna Becevel, Andrea Curley, Michael Collins, William O'Mahony, Dympna O'Sullivan

Articles

Purpose:

Computing ethics represents a long established, yet rapidly evolving, discipline that grows in complexity and scope on a near-daily basis. Therefore, to help understand some of that scope it is essential to incorporate a range of perspectives, from a range of stakeholders, on current and emerging ethical challenges associated with computer technology. This study aims to achieve this by using, a three-pronged, stakeholder analysis of Computer Science academics, ICT industry professionals, and citizen groups was undertaken to explore what they consider to be crucial computing ethics concerns. The overlap between these stakeholder groups are explored, as well as whether …

Co-Carriage Of Metal And Antibiotic Resistance Genes In Sewage Associated Staphylococci, Atena Amirsoleimani, Gail M. Brion, Patrice Francois

Civil Engineering Faculty Publications

Controlling spread of resistance genes from wastewater to aquatic systems requires more knowledge on how resistance genes are acquired and transmitted. Whole genomic sequences from sewage-associated staphylococcus isolates (20 S. aureus, 2 Staphylococcus warneri, and 2 Staphylococcus delphini) were analyzed for the presence of antibiotic resistance genes (ARGs) and metal resistance genes (MRGs). Plasmid sequences were identified in each isolate to investigate co-carriage of ARGs and MRGs within. BLASTN analysis showed that 67% of the isolates carried more than one ARG. The carriage of multiple plasmids was observed more in CC5 than CC8 S. aureus strains. Plasmid …

Energy Dissipation Using Negative Stiffness Shells, Mohamed Elgawady, Yasser Darwish

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A negative stiffness shell has a convex first position, but can transition or snap to a concave second position under a force applied to the exterior surface of the shell in the convex first position. During the transition, the shell exhibits negative stiffness that permits a large amount of energy to be absorbed. The negative stiffness shell can withstand a high initial force threshold prior to transitioning. In the second, concave position the shell can still resist force. Moreover, it is possible for the shell to revert back to the first, convex position with minimal plastic deformation for subsequent use. …

Impact Of Clay Stabilizer On The Methane Desorption Kinetics And Isotherms Of Longmaxi Shale, China, Zhong Hua Liu, Jia Chun Wang, Baojun Bai, Yan Ling Wang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Knowing methane desorption characteristics is essential to define the contribution of adsorbed gas to gas well production. To evaluate the synthetic effect of a clay stabilizer solution on methane desorption kinetics and isotherms pertaining to Longmaxi shale, an experimental setup was designed based on the volumetric method. The objective was to conduct experiments on methane adsorption and desorption kinetics and isotherms before and after clay stabilizer treatments. The experimental data were a good fit for both the intraparticle diffusion model and the Freundlich isotherm model. We analyzed the effect of the clay stabilizer on desorption kinetics and isotherms. Results show …

On-Site/In Situ Continuous Detecting Ppb-Level Metal Ions In Drinking Water Using Block Loop-Gap Resonators And Machine Learning, Sangmin Oh, Imtiaz Hossen, Juan R. Luglio, Gusphyl Justin, James Richie, Henry Medeiros, Chung-Hoon Lee

Electrical and Computer Engineering Faculty Research and Publications

Microwave measurements and machine learning algorithms are presented to estimate metal ion concentrations in drinking water. A novel block loop gap resonator (BLGR) as a microwave probe is designed and fabricated to estimate Pb ion concentrations in city water as low as 1 ppb with an rms error of 0.18 ppb. No physical contact between the BLGR probe and the water sample allows on-site/in situ continuous detection of ppb-level metal ion concentrations. The S₁₁ raw data (amplitude and phase) from the BLGR are used to classify and estimate metal ion concentrations using a support vector regression algorithm. The performance …

Start With Simple Spacecraft: Cansat & Cricketsat, Robert J. Twiggs

Robert "Bob" Twiggs STEM Education Collection

A PowerPoint Presentation created by Professor Bob Twiggs titled "Start with Simple Spacecraft: CanSat & CricketSat" from September 22, 2021.

Simulation For A Mems-Based Ctrnn Ultra-Low Power Implementation Of Human Activity Recognition, Muhammad Emad-Ud-Din, Mohammad H. Hasan, Roozbeh Jafari, Siavash Pourkamali, Fadi M. Alsaleem

Durham School of Architectural Engineering and Construction: Faculty Publications

This paper presents an energy-efficient classification framework that performs human activity recognition (HAR). Typically, HAR classification tasks require a computational platform that includes a processor and memory along with sensors and their interfaces, all of which consume significant power. The presented framework employs microelectromechanical systems (MEMS) based Continuous Time Recurrent Neural Network (CTRNN) to performHAR tasks very efficiently. In a real physical implementation, we show that the MEMS-CTRNN nodes can perform computing while consuming power on a nano-watts scale compared to the micro-watts state-of-the-art hardware. We also confirm that this huge power reduction doesn’t come at the expense of reduced …

Emr: A New Metric To Assess The Resilience Of Directional Mmwave Channels To Blockages, Faith Erden, Ozgur Ozdemir, Ismail Guvenc, David W. Matolak

Faculty Publications

Millimeter-wave (mmWave) communication systems require narrow beams to compensate for high path loss and to increase the communication range. If an obstacle blocks the dominant communication direction, alternative paths (directions) should be quickly identified to maintain reliable connectivity. In this paper, we introduce a new metric to quantify the Effective Multipath Richness (EMR) of a directional communication channel in the angular domain. In particular, the proposed metric takes into account the strength and spatial diversity of the resolved Multipath Components (MPCs), while also considering the beamwidth of the communication link and the blockage characteristics. The metric is defined as a …

Characterization Of Tea (Camellia Sinensis) Granules For Quality Grading Using Computer Vision System, Md Towfiqur Rahman, Sabiha Ferdous, Mariya Sultana Jenin, Tanjina Rahman Mim, Masud Alam, Muhammad Rashed Al Mamun

Department of Agricultural and Biological Systems Engineering: Faculty Publications

Tea (Camellia sinensis) has been found as an important medicinal beverage for human which is consumed all over the world. Primarily, the majority of tea is being cultivated in Asia and Africa, however it is commercially produced by more than 60 countries. Though substantial amount is produced, its processing system is still underdeveloped which leads to decrease in export opportunity as well as low monetary value. Moreover, the traditional method of tea grading and sorting is laborious, inefficient, and costly which ultimately produces the low-quality heterogeneous products. Processing and grading of tea granules after drying is very important …

Assessment Of A Program For Sars-Cov-2 Screening And Environmental Monitoring In An Urban Public School District, John Crowe, Andy T. Schnaubelt, Scott Schmdit Bonne, Kathleen Angell, Julia Bai, Teresa Eske, Molly Nicklin, Catherine Pratt, Bailey White, Brodie Crotts-Hannibal, Nicholas Staffend, Vicki Herrera, Jeramie Cobb, Jennifer Connor, Julie Carstens, Jonell Tempero, Lori Bouda, Matthew Ray, James V. Lawler, W Scott Campbell, John-Martin Lowe, Joshua Santarpia, Shannon Bartelt-Hunt, Michael Wiley, David Brett-Major, Cheryl Logan, Jana Broadhurst

Department of Civil and Environmental Engineering: Faculty Publications

IMPORTANCE Scalable programs for school-based SARS-CoV-2 testing and surveillance are needed to guide in-person learning practices and inform risk assessments in kindergarten through 12th grade settings. OBJECTIVES To characterize SARS-CoV-2 infections in staff and students in an urban public school setting and evaluate test-based strategies to support ongoing risk assessment and mitigation for kindergarten through 12th grade in-person learning. DESIGN, SETTING, AND PARTICIPANTS This pilot quality improvement program engaged 3 schools in Omaha, Nebraska, for weekly saliva polymerase chain reaction testing of staff and students participating in in-person learning over a 5-week period from November 9 to December 11, 2020. …

Optimal Placement Of Fuses And Switches In Active Distribution Networks Using Value-Based Minlp, N. Gholizadeh, S.H. Hosseinian, M. Abedi, Hamed Nafisi, P. Siano

Articles

Contingency conditions in distribution networks create financial losses for different parts of the system including electricity customers, electricity retailers, distributed generation (DG) units, etc. Therefore, protective device allocation methods have been introduced in recent years to enhance the reliability of the power system. In this study, a new formulation is proposed to find the optimal places of sectionalizing switches and fuses while taking the financial loss of both electricity customers and DG units into account. The current method has the flexibility to consider DG effect on any location of the network and its islanded operation in case of contingencies. Moreover, …

Flexible Mold For Microstructures Replication, Zefu Ren, Dae Won Kim

Student Works

Space debris has been a growing concern in space exploration sector. To combat this issue, biomimicry is utilized to create a gecko’s feet microstructure that will be attached to a gripper or robotic arm. This will enable capture of debris through the use of dry adhesive microstructure. However, the production of such microstructures is expensive which hinders their implementation. The objective of this research is to develop an advanced fabrication process to mass produce gecko’s feet microstructure with soft polymer mold. The possibility of using different coating methods with coating materials will be justified. The process of fabricating mold and …

Issue 12: Contributors, Don Flournoy

Online Journal of Space Communication

Biographical information on the Issue 12 contributors.

Usdla: An Instructional Media Selection Guide For Distance Learning, Jolly T. Holden, Philip Westfall

Online Journal of Space Communication

Purpose and Use of the Media Selection Guide

Increasingly, educators and trainers are challenged within their respective
organizations to provide for the efficient distribution of instructional con-
tent using instructional media. The appropriate selection of instructional
media to support distance learning is not intuitive and does not occur as a
matter of personal preference. On the contrary, instructional media selec-
tion is a systematic sequence of qualitative processes based on sound in-
structional design principles. Although media selection is often mentioned
when studying the discipline of instructional technology or Instructional
Systems Design (ISD), it is sometimes overlooked when applying the …

U.S. Government Education And Training Network, Philip Westfall

Online Journal of Space Communication

The U.S. Government Education and Training Network is a network of networks operated by a consortium of 17 federal agencies. With over 10,000 scheduled hours of broadcasting each year (4,500 from ATN alone), from 15 uplinks reaching out to over 1,500 receive sites, GETN offers high-quality, low-cost ITV with virtually limitless distribution capability within the US today and overseas.

A Critical Perspective On The Indian Experience, K. P. Madhu

Online Journal of Space Communication

Growth in the use of satellites for education has been phenomenal in India. Beginning in the 1970s with the SITE project (Satellite Instructional Television Experiment) using a borrowed US satellite, then in the 1980s having its own indigenous INSAT satellite for educational TV, to having a full fledged educational channel on national TV in the 1990s, to the potential of 72 educational channels on EDUSAT at the beginning of the 21st century, shows long-term interest and commitment to this sector.

Distance Education Projects In Kyrgyzstan, Aida Aidakyeva

Online Journal of Space Communication

Kyrgyzstan is a landlocked country in Central Asia, one of the former Soviet Union republics, endowed with few natural resources, but it has a tremendously advantageous location on the major crossroads between Asia and Europe. Under the Soviet system the educational level of the population used to be very high in Kyrgyzstan. Recently the quality of education has started to worsen due to the continuous migration of the nation's specialists to more economically developed countries.

Distance Education Via Satellite: An Early Case Study Of The Indonesian Distance Education Satellite System, Willard D. Shaw

Online Journal of Space Communication

In 1980, the U.S. Agency for International Development initiated the AID Rural Satellite Program (RSP) to explore the potential of telecommunications as a means of extending scarce expert resources and expanding educational opportunities to remote and rural areas. Building on simple, interactive, and inexpensive telephone-based technologies, the Program developed teleconferencing systems for use as a development tool. Three pilot projects-in Indonesia, the West Indies, and Peru-were implemented to test and demonstrate that audioteleconferencing could reliably and affordably support development activities in education, health and agriculture.

The abstract of this paper is available in Bahasa Indonesia. See supplemental files below.

Telesecundaria Of Mexico, Jose Calderoni

Online Journal of Space Communication

A perspective by one who has spent many years working in a distance education program that is successful…

Mexico's Educational Satellite Program

Satellite Technology Applications In Education: Examples From Greece, Yioryos Nardis

Online Journal of Space Communication

In ancient Greece, there was a mechanism for processing space information from the earth. The Antikythera has since been referred to as the world's first (mechanical) computer. In Greece, the Antikythera mechanism was used to fabricate calendars and schedules for seasons of harvesting and for organizing religious festivals. More than two millennia later, the descendants of these early scholars and technicians are still using outer space to educate themselves, but now the mechanism is electronic and digital using software and spaced-based satellites.

Worldspace Satellite Radio, S. Rangarajan

Online Journal of Space Communication

There are significant challenges to the delivery of quality education to less-developed nations. The primary obstacle is the lack of available and affordable connectivity solutions. Broadcast satellites can play an important role to fill this void. Particularly, digital broadcast satellites can provide audio and multimedia contents to multiple locations simultaneously. WorldSpace, with its extensive reach and low-cost terminals, offers a viable solution to increase the access to global educational resources. This solution includes audio formats, asynchronous multimedia delivery and creation of virtual classrooms with instructor-led, synchronous delivery of audio-visual presentations. These help enhance the quality of education delivery across Africa …