Engineering Commons^™

A Comprehensive Review Of In-Situ Polymer Gel Simulation For Conformance Control, Baojun Bai, Jianqiao Leng, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been widely applied in mature oilfields to improve sweep efficiency and control water production. Correct numerical simulation is of major importance to the optimization design and prediction of a successful gel treatment. However, there exist many problems in current simulation studies in published literature. This paper first presents a comprehensive review on the major factors that have been considered at different gelation stages during gel treatment, the models used in the commercial/in-house simulators, and current numerical simulation studies on both laboratory and field scales. Then we classify the current in-situ gel numerical simulation problems as 1, deficient …

Investigation Of Distracted Driving Events In New Jersey, Ahmed Sajid Hasan

Theses and Dissertations

Every year, thousands of people die in the United States due to crashes involving distracted driving, with this cause contributing to 25% of all fatal traffic crashes in New Jersey in particular. Over the past several years, various techniques (e.g., surveys, crash reports, videos, and simulations) were developed and implemented by the transportation safety community to identify and evaluate distracted driving events. However, these methods collect cross-sectional data on individual subjects and do not provide the actual number of distractions on the road. To fill this gap, this study collected longitudinal data on distracted driving events in the state of …

Intelligent Optimization Algorithm-Based Path Planning For A Mobile Robot, Qisong Song, Shaobo Li, Jing Yang, Qiang Bai, Jianjun Hu, Xingxing Zhang, Ansi Zhang

Faculty Publications

The purpose of mobile robot path planning is to produce the optimal safe path. However, mobile robots have poor real-time obstacle avoidance in local path planning and longer paths in global path planning. In order to improve the accuracy of real-time obstacle avoidance prediction of local path planning, shorten the path length of global path planning, reduce the path planning time, and then obtain a better safe path, we propose a real-time obstacle avoidance decision model based on machine learning (ML) algorithms, an improved smooth rapidly exploring random tree (S-RRT) algorithm, and an improved hybrid genetic algorithm-ant colony optimization (HGA-ACO). …

The Physics Of Slot-Die And Gravure Coating Associated With Precision Thin Films And Coating Defects, Robert E. Malakhov

Nanoscience and Microsystems ETDs

Enabling future printable and flexible electronic (PFE) devices and technologies requires overcoming the technical challenge of manufacturing precision thin films and features at scale. Coating- and print-feature functionality for PFEs is imparted with dispersed active particulate inks that provide electronic properties via slot-die coating, a pre-metered film-deposition process, and gravure printing, a high-throughput, precision process. Both are poised to be ideal manufacturing technologies for PFEs but require further research to understand particulate effects in defect formation and processability. Therefore, overcoming the technical challenges of precision, throughput, and the complexities of particulate inks is the purpose of this work. For slot-die …

Hybrid Scenario Generation Method For Stochastic Virtual Bidding In Electricity Market, Dongliang Xiao,, Wei Qiao

Department of Electrical and Computer Engineering: Faculty Publications

Stochastic optimization can be used to generate optimal bidding strategies for virtual bidders in which the uncertain electricity prices are represented by using scenarios. This paper proposes a hybrid scenario generation method for electricity price using a seasonal autoregressive integrated moving average (SARIMA) model and historical data. The electricity price spikes are first identified by using an outlier detection method. Then, the historical data are decomposed into base and spike components. Next, the base and spike component scenarios are generated by using the SARIMA- and historical data-based methods, respectively. Finally, the electricity price scenarios are obtained by combining the base …

Building A Biomechanical Model Of A Rat Forelimb, Joshua Nathaniel Eric Mak

Dissertations and Theses

This paper presents a biomechanical model of the rat forelimb to test theories of determining viscoelastic muscle parameters. Several biomechanical models of rat hindlimbs have been developed and have explored the effects of multi-muscle control during locomotion. The forelimb model uses two ball-and-socket joints to model clavicle and scapula movement. A third ball-and-socket joint is used at the shoulder and two hinge joints are used at the elbow and wrist. Scapula motion is further constrained by muscle and spring elements. Each forelimb has 11 degrees of freedom, and 23 Hill-type muscles. The model has been created in Animatlab, which includes …

Growth Of Invasive Plant Species Communities As A Substantial Issue In Post-Mining Land Development, Paweł Olszewski

Journal of Sustainable Mining

This article concerns the issue of the appearance and growth of invasive plant species in land degraded by hard coal mining and the repercussions of this process, particularly in the context of land reclamation. These species, such as Canadian goldenrod or Japanese knotweed, which nearly always form extensive and monocultural patches of vegetation, contribute to the displacement of both native species and those introduced as part of biological restoration. In 2015, the Central Mining Institute in Katowice prepared a land development concept for a part of the area of the former KWK Paryż mine in Dąbrowa Górnicza (Upper Silesian Industrial …

Vacancy-Induced Enhancement Of Electron-Phonon Coupling In Cubic Silicon Carbide And Its Relationship To The Two-Temperature Model, Salah Al Smairat, Joseph T. Graham

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

The electron-phonon coupling factor was calculated for both pristine and vacancy-rich 3C-SiC. Ab initio calculations were performed within the framework of the density functional perturbation theory. Wannier functions were used to interpolate eigenvalues into denser grids through the electron-phonon using Wannier code. The coupling factor was determined through calculations of the electron self-energy, electron-phonon relaxation time, and electronic specific heat. These parameters were extrapolated to high temperatures using a hybrid model which mixes band calculations for electrons below an energy cutoff with the free electron gas model for electrons above the energy cutoff. The electron relaxation times, specific heats, electron …

Recent Development Of Unpowered Exoskeletons For Lower Extremity: A Survey, Tao Liu, Bin Zhang, Bin Zhang, Micheal G. Pecht

Faculty Publications

Unpowered exoskeletons (UEs) have attracted extensive research attentions for their portability, handleability and simplicity. However, designing exoskeletons without any active actuators is a great challenge because essential criteria such as performance enhancement, low impedance, and comfort must be met. This paper reviews the UEs researches from three aspects including modeling for understanding gait pattern, mechanical designs, and validation methods, which are main considerations of designing UEs. This review is based on the reported works in the past two decades and underlines some practical opportunities and challenges. Statistical data analysis and critical reviews are stated to understand human gait patterns, designing …

Delivery Optimization And Evaluation Of Biomechanics Of An Injectable Nucleus Pulposus Replacement Device, Zachary Rustin Brown

Theses and Dissertations

Lower back pain effects up to 80% of people at some point in their life, a majority of cases being the result of degenerative disc disease. Treatment options for degenerative disc disease are limited, jumping from physical therapy to major spinal fusion and total disc replacement surgery with little to no approaches in between. Furthermore, surgical treatments have not shown to be more effective than conservative treatments and reducing pain and disability over the long term. Hydrogels have shown promise as a potential nucleus pulposus replacement device. Their properties are controllable and can be implanted into the body through minimally …

Development Of Carbon And Silicon Carbide Based Microelectrode Implantable Neural Interfaces, Chenyin Feng

USF Tampa Graduate Theses and Dissertations

The use of neural modulation techniques to treat nervous system disorders, as well as neural recording to study brain function, continues to be of intense interest around the world. Due to the need to treat diseases such as Parkinson’s, dementia, depression and return normal function to patients suffering from nervous system damage and trauma, neural implants continue to be developed globally. One of these devices, the microelectrode implantable neural interface (mINI), has been rapidly developed, thanks to advanced semiconductor fabrication processes. However, the long-term reliability of present-day devices has still to be demonstrated and is delaying the application of this …

Analysis Of Harmful Mixtures In Air Flow During Cotton Cleaning, A Adilova, O J. Murodov, P N. Rudovskiy

Technical science and innovation

Annotation. The article analyzes the separation of harmful impurities in the air flow from various machines during the initial processing of cotton, ways to clean the dusty air released from the dust, dusty air from the air extracted from dust extractors and pneumatic transport installations and dust and contaminants before release into the atmosphere. The causes and ways to reduce the release of large amounts of dust at all stages of the primary processing of cotton, which can reduce air pollution in production facilities and air, worsen the working conditions of workers and employees and lead them to occupational diseases, …

Economic Test Results Of Experimental Spring Device, Husniddin D. Irisov, Alexander P. Kartoshkin

Technical science and innovation

The article conducts economic research on the development of resource-saving technologies in the artificial shedding of cotton leaves and new scientific and technical solutions for the formation of high-dispersion droplets of spraying equipment, including the technological operation of high-dispersion droplet-forming spraying devices for small-volume fan sprayers.The experimental spraying unit, equipped with advanced cultivators, was tested in the field under typical field conditions and optimal agro-technical terms for the agro-technical evaluation test area. During the study, test schemes were adopted to determine the performance of sprayers in the field, soil type, relief and microrelief, soil moisture and hardness were determined in …

Analysis And Selection Of Methods And Sensors For Controlling The Width Of The Working Slot Of The Harvesting Devic Cp., E Uljaev, U M. Udabydullaev, A A. Abdulkhamidov, S M. Erkinov Master

Technical science and innovation

A review and analysis of known works on the automation of control and regulation-monitoring of the width of the working slots of the harvesting apparatus (НA) of the cotton harvester, in particular, the automation of control and regulation of working units, which determines the indicators of the quality of the harvest and the productivity of the cotton harvester, is carried out. It has been substantiated that in order to increase the efficiency of the functioning of the cotton picker, automatic control and management systems are needed that perform the functions of information-measuring and control systems that perform horizontal and vertical …

Analysis Of The Possibility Of Increasing The Degree Of Zinc Waelz And Reducing Metal Losses During Waelz, Bakhriddin Tilovkabulovich Berdiyarov Dr.

Technical science and innovation

The article examines the flow process of zinc cakes, which is formed during the selective melting of zinc burns, and the factors influencing it. The effects of silica and calcium oxide on the combustion of coke added to the Welting process were analyzed. When the kinetic kinetics of zinc ferrites and silicates present in zinc cakes are studied, the addition of lime to the strategy promotes the thermodynamic recovery of zinc and reduces graphite consumption.The article also examines the temperature dependence of the rate of reduction reactions of zinc silicate and zinc oxides. Studies of the kinetics of coal-thermal reduction …

Protection Of Transport Structures From Natural Emergencies, Shavkat Х. Abduazimov, Ravshan S. Razikov, Gani A. Kurbanov

Technical science and innovation

In the mountainous and foothill areas of the republic in spring and late autumn, heavy rains and floods cause landslides on the slopes, landslides as a result of coagulation of most of the land. At the same time, careless grazing of livestock on the slopes, felling of trees in the foothills, as a result of strong floods, the water flow on the slopes flows downhill, washing away all the debris, rocks and sand, endangering the movement of passenger and freight trains. . This article aims to protect against the above-mentioned situations, to ensure the safety of transport facilities. At the …

Combined Devices Of Facts Technology, Bahrom Ravshanovich Normuratov Associate Lecturer, Misrikhan Misrikhanov, Shukhrat Khamidov

Technical science and innovation

FACTS - Flexible Alternative Current Transmission System technology is a family of devices, each of which can be used individually and in concert with other devices to control the interrelated parameters of the electrical power system. The mission of FACTS technology is to improve the control of power flows in both steady-state and transient modes of EPS. Flexibility of Electric Power Transmission, applied as "The ability to adapt to changes in transmission system or operating conditions while maintaining sufficient operating limits in steady-state and transient modes". Controlled Flexible AC Transmission Lines - Flexibility from Electric Power Transmission means "AC Power …

Paper Porosity Studies Using The Sorption Method, A Sadriddinov, Z Galimova, I Ismoilov, X Babaxanova, M Mixaleva

Technical science and innovation

One of the main properties of paper affecting the quality of reproduction is porosity, which depends on many factors, such as properties of raw materials, casting mode. From this point of view it is important to have ideas about the influence of paper composition on their porous structure and it is important to know the dependencies affecting the formation of the porous structure of paper during their manufacture. Papers based on cellulose pulp from the inner layer of mulberry bark were used as an object of study and lint cotton cellulose papers were taken for comparison. In the paper to …

Features Of Atom Spectra Ca, Ba, Sr, M A. Tursunov, A B. Zon, D A. Tashmuxamedova, A X. Xaydarov, S S. Pak, Z A. Alimova

Technical science and innovation

This paper deals with the issues of atomic spectroscopy of multiphoton ionization of alkaline earth atoms. The cycle of researches, which substantially complements the modern understanding of the physical essence of processes, is described. The analysis and generalization of the obtained experimental and available theoretical materials are carried out, and studies on the influence of the correlation of valence electrons on the process of multiphoton ionization of alkaline earth atoms are presented in detail. The appearance of intense intercombination transitions coincides in n with a sharp change in the magnitude of the quantum defect. Since an abrupt change in the …

Synthesis And Polymerization Processes Of 1-Chlorine-3- Piperidine -2-Propylmethacrylate Monomer, N U. Pulatova, O S. Maksumova, Izabela Barszczewska Rybarek

Technical science and innovation

An amino alcohol was synthesized on the basis of piperidine and epichlorohydrin. The esterification reaction of methacrylic acids with the obtained amino alcohol was studied. In order to identify optimal synthesis conditions, the influence of temperature, reaction duration and ratio of reactive reagents was investigated. The processes of obtaining unsaturated esters by esterification reactions with 1-chlorine-3-piperidine-2-propanol and acrylic-, methacrylic acids have been studied. The effect of monomer concentration on the rate of polymerization reaction and the yield of polymer formation was studied . The radical polymerization of a new monomer with a piperidine cycle in the presence of a nitrogen-containing …

Microscopic Diffusion Characteristics Of Linear Alkylbenzene Sulfonates On The Surface Of Anthracite: The Influence Of Different Attachment Sites Of Benzene Ring In The Backbone, Xuanlai Chen, Guochao Yan, Xianglin Yang, Guang Xu, Shuai Wei

Mining Engineering Faculty Research & Creative Works

In order to explore the effect of the attachment site of the benzene ring in the backbone of the surfactant on its diffusion characteristics on the surface of anthracite, the molecular dynamics simulation method was used, and the four isomers (m-C16, m = 2,4,6,8; m represents the attachment site of the benzene ring in the backbone) of sodium hexadecyl benzene sulfonate (SHS) were selected. Binary models of surfactant/anthracite, surfactant/graphene modified by oxygen-containing functional groups, and a ternary model of water/surfactant/anthracite were constructed. By analyzing a series of properties such as interaction energy, contact surface area, relative concentration distribution, radial distribution …

Effects Of Fiber Clustering On Fatigue Behavior Of Steel Fiber Reinforced Concrete Beams, Danying Gao, Zhiqiang Gu, Congjie Wei, Chenglin Wu, Yuyang Pang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper investigated the effects of fiber clustering on fatigue behavior of steel-fiber-reinforced concrete (SFRC) beams with reinforcements by experimental and numerical analysis. The steel fiber volume fractions of beams were 0 vol%, 0.5 vol%, 1.0 vol%, and 1.5 vol%. One beam was tested under static loading, and eight beams under fatigue loading with different stress levels. Moreover, the fiber distribution in the cross section of concrete was experimentally characterized to understand the underlying mechanism. The results indicated that the fatigue life of beam increased with increasing fiber volume fraction from 0 to 1.0 vol% and decreased from 1.0 vol% …

Improved Predictive Modeling Techniques For Non-Linear Solder Material Behavior, Arman Millian Ahari

Dissertations and Theses

Accurate prediction of fatigue life of solder joints in electronic packaging applications becomes of critical importance as semiconductor device technology and manufacturing constraints grow in complexity. To gain visibility on IC device performance and reliability, thermo-mechanical simulation is performed based on a unified, viscoplastic material model, which is dependent on nine parameters.

In this study, an improved method of Anand parameter extraction, which involves curve-fitting non-linear experimental stress data, is proposed to improve the accuracy of numerical predictions for solder reliability. Theoretical equations for uni-axial stress-strain response and creep response are derived, then details on their relevance to experimental and …

Undrained Cyclic Loading Of Low Plasticity Silty Soils In The Pacific Northwest Using Laboratory And Field Cyclic Shear Testing, Angelica Melissa Preciado Reyes

Dissertations and Theses

The cyclic behavior of a fine-grained low plasticity silty soil (plasticity index of approximately 15) at a site in Portland, Oregon, is characterized using a field and laboratory cyclic shear test program. The field cyclic tests were performed using the NHERI@UTexas large mobile shakers T-Rex and Rattler. The laboratory tests were performed using resonant column torsional shear and cyclic direct simple shear devices. This testing program's results were used to evaluate the soil's potential to develop excess pore water pressure with cyclic shear strains ranging from 0.00001% to 3%. The laboratory cyclic test results are compared against field cyclic test …

The Return To Anisotropy Across A Jet In Crossflow, Gregory P. Sakradse

Dissertations and Theses

With data from experiments on a jet of air emitting from an orifice flush with the floor of a wind tunnel providing a transverse flow, analysis is conducted to extract information about the state of anisotropy in the Reynolds stress tensor. Inflow velocities are modulated across two distinct turbulence intensity regimes while holding jet exit conditions constant, providing an opportunity to isolate effects of both jet to crossflow velocity ratio, r and the effects of the turbulence carried by the crossflow. Anisotropy in the Reynolds stress tensor is examined through anisotropy invariant maps and evolution of the function F, …

Development Of A New Electro-Osmotic Consolidation Apparatus, Yenni Mariana Ramírez-Mazo, Juan Pablo Osorio, Sergio Agudelo

Conference papers

Electro-osmotic consolidation is a ground improvement technique in which a DC voltage is applied to the soil via electrodes, in order to drain the water contained in the pores increasing the effective stress, and thus improving the geotechnical properties of the soil. The technique increases the shear strength, reduces the compressibility, and changes the chemical composition of the saturated soft clayey and silty soils to which it can be applied. Electro-osmotic consolidation has been successfully applied in different projects worldwide. This paper presents the development of a new electro-osmotic consolidation apparatus built at Universidad de Antioquia. Tests were carried on …

Geological Origin As An Input Variable In Reliability-Based Designs: For An Accurate Exploration In Geotechnical Engineering, Juan Camilo Viviescas, Juan Pablo Osorio

Conference papers

Soil is one of the most difficult materials to characterize realistically, which partly explains the uncertainty between the designs and the geostructures real behavior. Different recommendations have arisen with respect to carrying out field investigations in order to reduce the uncertainties inherent to the soil. However, the field exploration and the implementation of sophisticated geotechnical models have proven to be insufficient to mitigate the geotechnical uncertainty. Therefore, Reliability-Based Designs (RBD) emerge as a decision-making tool through the definition of the probability of failure in conjunction with the typical Factors of Safety. RBD requires a previous understanding of the most appropriate …

Biodegradable Nanocomposite Multifunctional Packaging Film For Fruits, Kalpani Y. Perera, Shubham Sharma, Dileswar Pradhan, Amit Jaiswal, Swarna Jaiswal

Articles

Biopolymers have been used in food packaging in recent years due to high pollution rates and decreased biodegradation of synthetic polymers. Chitosan (CH) and Sodium alginate (SA) are both biodegradable biopolymers with excellent film forming capability. TiO2 nanoparticles have high mechanical strength, degradation ability and antimicrobial properties, which are beneficial in food packaging. The aim of the current work is to develop the biodegradable multifunctional nanocomposite film for fruit (i.e., Pear) packaging applications. Bionanocomposite film was prepared by solvent casting method using CH-SA and various concentrations of TiO2. The multifunctional properties such as UV barrier, thermal, water retention, mechanical, chemical, …

Automatic Identification And Monitoring Of Plant Diseases Using Unmanned Aerial Vehicles: A Review, Krishna Neupane, Fulya Baysal-Gurel

Agricultural and Environmental Sciences Faculty Research

Disease diagnosis is one of the major tasks for increasing food production in agriculture. Although precision agriculture (PA) takes less time and provides a more precise application of agricultural activities, the detection of disease using an Unmanned Aerial System (UAS) is a challenging task. Several Unmanned Aerial Vehicles (UAVs) and sensors have been used for this purpose. The UAVs’ platforms and their peripherals have their own limitations in accurately diagnosing plant diseases. Several types of image processing software are available for vignetting and orthorectification. The training and validation of datasets are important characteristics of data analysis. Currently, different algorithms and …

Thermal Comfort Of Educational Spaces In Campus Buildings And Its Effect On The Functional Performance Case Study: University Of Garmian In The Kurdistan Region Of Iraq., Chrakhan Hama, Sherief Sheta, Mina Michel Samaan

Mansoura Engineering Journal

The Most important questions about the thermal comfort of educational spaces in campuses and its effect on the functional performance are simple ones. Why this subject important, Developing design standards for university buildings in the region to reach spaces that provide thermal comfort and high functionality, do educational spaces is lack thermal comfort requirements, and what is the effect of thermal comfort on the functionality of university educational buildings? Only by answering these questions can we develop design parameters to achieve the requirements of thermal comfort for education space users. The research about thermal comfort of educational spaces in campuses …