Engineering Commons^™

Atlantis: A Benchmark For Semantic Segmentation Of Waterbody Images, Mohammad H. Erfani, Zhenyao Wu, Xinyi Wu, Song Wang, Erfan Goharian

Faculty Publications

Vision-based semantic segmentation of waterbodies and nearby related objects provides important information for managing water resources and handling flooding emergency. However, the lack of large-scale labeled training and testing datasets for water-related categories prevents researchers from studying water-related issues in the computer vision field. To tackle this problem, we present ATLANTIS, a new benchmark for semantic segmentation of waterbodies and related objects. ATLANTIS consists of 5,195 images of waterbodies, as well as high quality pixel-level manual annotations of 56 classes of objects, including 17 classes of man-made objects, 18 classes of natural objects and 21 general classes. We analyze ATLANTIS …

Completion And Initial Testing Of A Pressurized Oxy-Coal Reactor, Scott Hunsaker Gardner

Theses and Dissertations

Oxy-combustion is a process which removes nitrogen from air prior to combustion in order to produce a high concentration of CO2 in the exhaust. This enables CO2 liquefaction, transport, and storage to greatly reduce CO2 emissions to the atmosphere. Atmospheric oxy-coal combustion has been successfully demonstrated at industrial scales and could be retrofit in existing coal boilers, but thermodynamic efficiencies are low and therefore uneconomical. Pressurized oxy-coal combustion has the potential for higher efficiency and lower cost but requires new technologies related to the coal feed system, the burner, and ash management. This project describes work needed to complete the …

Multilayer Lateral Heterostructures Of Van Der Waals Crystals With Sharp, Carrier–Transparent Interfaces, Eli A. Sutter, Raymond R. Unocic, Juan-Carlos Idrobo, Peter Sutter

Department of Electrical and Computer Engineering: Faculty Publications

Research on engineered materials that integrate different 2D crystals has largely focused on two prototypical heterostructures: Vertical van der Waals stacks and lateral heterostructures of covalently stitched monolayers. Extending lateral integration to few layer or even multilayer van der Waals crystals could enable architectures that combine the superior light absorption and photonic properties of thicker crystals with close proximity to interfaces and efficient carrier separation within the layers, potentially benefiting applications such as photovoltaics. Here, the realization of multilayer heterstructures of the van der Waals semiconductors SnS and GeS with lateral interfaces spanning up to several hundred individual layers is …

Dioxins Contamination In Sediment And Their Effect On Accumulation In The Portuguese Oyster (Crassostrea Angulata) And White Shrimp (Litopenaeus Vannamei), Yin-Yu Chen, Yu-Sheng Wu, Hsiang-Yin Chen, Zhen-Hao Liau, Fan-Hua Nan

Journal of Marine Science and Technology–Taiwan

This research aims to realize whether the dioxin accumulation in the oyster and white shrimp which were cultured in the dioxin pollutant sediment. This presented evidence indicated that dioxin was detected in all experimental groups with high concentration accumulated in experiment animals. Observation of the concentration, the PCDD/F, 2,3,7,8-T4CDD was with high concentration in the sediment and declined with the time elapsed. Detection of the dioxin accumulated in the animal, the accumulative maximum amounts was in the oyster as 3746.16 (pg-TEQ/g d.w.) and in the shrimp as 705.44 (pg-TEQ/g d.w.). The detected amount of dioxin in the supernatant was quite …

A Meshless Method With Radial Basis Function For Solving Unsaturated Flow In Heterogeneous Porous Media, Cheng-Yu Ku, Chih-Yu Liu, Wei-Po Huang, Jing-En Xiao

Journal of Marine Science and Technology–Taiwan

This paper presents a study for solving unsaturated flow in heterogeneous porous media using the meshless method with the radial basis function (RBF). For modeling the nonlinear hydrological process in unsaturated zone, an exponential model is introduced in the Richards equation such that we may obtain the linearized Richards equation. We adopt the multiquadric function as the RBF in the meshless method for solving the linearized Richards equation. For simulating the unsaturated flow problems in layered heterogeneous soils, the flux and the head must satisfy the continuity condition at the interface. Several examples are carried out for modeling the hydrological …

Catch Rates And Distribution Pattern Of The Silky Shark, Carcharhinus Falciformis, Caught By The Taiwanese Large-Scale Longline Fishery In The Indian Ocean, Chia Yun Li, Xing-Han Wu, Shang Yin Vanson Liu, Sheng-Ping Wang, Wen-Pei Tsai

Journal of Marine Science and Technology–Taiwan

The silky shark, Carcharhinus falciformis, is widely distributed in tropical and temperate waters, and it is a common bycatch species for tuna longline fisheries. This study examined the distribution of and presents relative abundance indices of the silky shark in the Indian Ocean by using logbook and observer data from the Taiwanese large-scale tuna longline fishery between 2005 and 2019. Due to the high zero catch rate, a zero-inflated negative binomial (ZINB) model was used to standardize catch per unit effort. Due to a lack of detailed targeting information, the fishery strategy was identified by using cluster analysis based on …

Accumulation And Bioavailability Of Heavy Metals (Cadmium, Chromium, Nickel, Lead And Zinc) In Water And Sediment Samples In The Musa Creek, Northwest Coasts Of The Persian Gulf, Saghafiankhoo Sedigheh, Battaleb-Looie Sedigheh, Amanipoor Hakimeh, Dravishi Khatooni Javad, Ghanemi Kamal

Journal of Marine Science and Technology–Taiwan

The current study aimed to investigate the total concentrations of heavy metals in water and sediment samples as well as their bioavailability in sediments of Musa Creek. Twenty samples including 10 sediments and 10 water samples were collected from 10 stations. The concentration of heavy metals was measured using inductively coupled plasma–mass spectrometry. The bioavailability of heavy metals was carried out by first step of Tessier sequential extraction method so called single extraction in the manuscript. The results showed that the mean concentrations of cadmium, chromium, nickel, and zinc in water samples was 0.17, 7.44, 43.80, and 8.85 µg/L, respectively. …

Parametric Analyses Of The Dynamic Response And Fatigue Life Of A Compliant Vertical Access Riser With Internal Flow, Fuheng Li, Haiyan Guo, Xiaomin Li, Zhen Liu, Honglu Gu, Peng Cui

Journal of Marine Science and Technology–Taiwan

Subsea interventions on wellheads can be directly performed from a platform using a compliant vertical access riser (CVAR), thereby incurring tremendous economic benefits. The dynamic response and the fatigue damage of a CVAR subjected to regular waves are important for assessing its application feasibility. Therefore, a reasonable numerical model is presented for assessing the damage to a CVAR considering the internal flow using the slender rod theory. The finite element method combined with a Newmark-β scheme is employed to discretize the equations and update the time integration. The Palmgren-Miner rule is applied for fatigue life prediction, focusing on the wave-induced …

Using The Inverse Method To Investigate Flow Models For Mixed Convection Of Annular Finned Tube Heat Exchanger, Han-Taw Chen, Cheng-Hui You, Wei-Lun Hsu, Jiang-Ren Chang

Journal of Marine Science and Technology–Taiwan

The inverse heat conduction method (IHCM) and three-dimensional (3D) computational fluid dynamic (CFD) in combination with are used to select the appropriate flow model and near-wall treatment for the mixed convection of the annular finned tube heat exchanger. Thus, the numerical results obtained by all k-ε models and near-wall treatments are yielded for 4 m/s ≤ Va ≤ 5 m/s. First, IHCM combined with is applied to estimate and Q values. The obtained estimates of and Q are used as reference values for CFD. The results show that the Tk and results obtained by the standard (STD) k-ε model with …

Prediction Of Remaining Useful Life Of Wind Turbine Shaft Bearings Using Machine Learning, Jinsiang Shaw, Bingjie Wu

Journal of Marine Science and Technology–Taiwan

Wind turbines are a major trend in the current green energy market. Wind energy is abundant, and if utilized properly, can result in significant reductions in carbon emissions. Therefore, the development of wind power systems is urgently required. However, wind turbines are mainly built in unmanned areas. Regular inspections require substantial manpower and material resources, and doubts regarding the accuracy of the inspected data may occur. Therefore, it is necessary to establish an automatic diagnostic method for determining the remaining useful life (RUL) of a wind turbine to facilitate predictive maintenance. In this study, a multi-class support vector machine (SVM) …

Supply Chain Management For Superyacht Construction In Taiwan, Chun Pong Wong

Journal of Marine Science and Technology–Taiwan

In the last 20 years, Taiwan’s superyacht construction industry has performed well in the global market; however, numerous yacht builders still practice traditional supply chain management (SCM), which is often inefficient and regularly leads to time and cost overruns. This study aimed to answer two research questions: 1) what SCM challenges does the superyacht construction industry face? and 2) what SCM strategies and practices should be adopted to improve the efficacy and profitability of superyacht construction companies?

Numerous studies have explored supply chains (SCs) and SCM, but few have focused on the superyacht construction industry. Superyacht construction projects are highly …

The Impact Of Variable Curing Conditions On The Properties And Microstructures Of Mixtures Of Ground Granulated Blast Furnace Slag And Circulating Q1 Fluidized Bed Combustion Ash, Shao-Heng Hsieh, Wei-Chung Yeih, Ran Huang

Journal of Marine Science and Technology–Taiwan

The use of Portland cement, an important construction material, is encountering growing challenges because of its adverse environmental impacts. In this study, a new hydration system without Portland cement, which blends ground granulated blast furnace slag (GGBFS) and circulating fluidized bed combustion (CFBC) ash, was developed and tested. The variables included the effect of different types of CFBC ash, the mass ratios between CFBC ash and GGBFS, and different curing temperatures. The mortar properties were determined through the compressive strength test, absorption test, shrinkage test, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The main results were as follows: …

A Marine Gis-Based Alert System To Prevent Vessels Collision With Offshore Platforms, Sheng-Long Kao, Ki-Yin Chang, Tai-Wen Hsu

Journal of Marine Science and Technology–Taiwan

How to effectively use an intelligent aid-to-navigation (AtoN) to prevent ships from accidentally colliding with offshore marine platforms (OMPs) is an important issue for maritime environment. This study proposes a novel collision alert system with three components to process Automatic Identification System (AIS) data in the cloud and broadcast AtoNs to ships in order to avoid collision with OMPs. The first component receives as input fuzzy linguistic variables (vessel size, relative speed, and approach distance) from the AIS data and calculates the radius of the guarding ring. The second component serves a Marine GIS (MGIS), where the system simulates the …

Energy Optimization By Scratchpad Memory Banking For Embedded Systems, Noha Abuaesh

Archived Theses and Dissertations

No abstract provided.

Texture Classification Using Transform Analysis, Mary Fouad Habib

Archived Theses and Dissertations

No abstract provided.

Fault Tolerant Ethernet Train Network, Mai H.S. Ibrahim

Archived Theses and Dissertations

No abstract provided.

Investigation Of Control Parameters, Strategies, And Transport Modeling For Effective Electrokinetic Nanoparticle Treatment Of Cementitious Materials, Huayuan Zhong

Doctoral Dissertations

Various deleterious chemical species (including sulfates, chlorides, and others) contaminate concrete structures which are inherently porous and thus suffer from compromised durability. Several technologies have been developed for repairing concrete or enhancing the service life. Nevertheless, their efficiency, practicability, and cost can vary widely. Compared with chemical grout, fiber wrap, and traditional repair technology, electrokinetic nanoparticle treatment (EN) has been found to provide remarkable benefits for strength restoration and mitigation of durability problems via porosity reduction. Nanoparticle instability and over dosage issues can arise and lead to problems during treatments. In many cases, these treatment processes have been accompanied by …

Piezoelectric Signals In Vascularized Bone Regeneration, Delfo D’Alessandro, Claudio Ricci, Mario Milazzo, Giovanna Strangis, Francesca Forli, Gabriele Buda, Mario Petrini, Stefano Berrettini, M. Jasim Uddin, Serena Danti, Paolo Parchi

School of Integrative Biological & Chemical Sciences (Formerly Dept. of Chemistry)

The demand for bone substitutes is increasing in Western countries. Bone graft substitutes aim to provide reconstructive surgeons with off-the-shelf alternatives to the natural bone taken from humans or animal species. Under the tissue engineering paradigm, biomaterial scaffolds can be designed by incorporating bone stem cells to decrease the disadvantages of traditional tissue grafts. However, the effective clinical application of tissue-engineered bone is limited by insufficient neovascularization. As bone is a highly vascularized tissue, new strategies to promote both osteogenesis and vasculogenesis within the scaffolds need to be considered for a successful regeneration. It has been demonstrated that bone and …

Approaching Industrial And Environmental Reform For Shaq Al-Thu'ban Marble And Granite Industrial Cluster, Rania Ahmed Hamza Sayed Eid

Archived Theses and Dissertations

No abstract provided.

Flexible Pavement Design Aashto 1993 Versus Mechanistic-Empirical Pavement Design, Ashraf Ayman Aguib

Archived Theses and Dissertations

No abstract provided.

Design And Analysis Of The Virtual Reality Welding Training, Ritesh Chakradhar

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Business and Technology at Morehead State University in partial fulfillment of the requirements for the Degree Master of Science by Ritesh Chakradhar on November 19, 2021.

Optimizing Vaccine Supply Chains With Drones In Less-Developed Regions: Multimodal Vaccine Distribution In Vanuatu, Deng Pan

Dissertations

In recent years, many less-developed countries (LDCs) have been exploring new opportunities provided by drones, such as the capability to deliver items with minimal infrastructure, fast speed, and relatively low cost, especially for high value-added products such as lifesaving medical products and vaccines. This dissertation optimizes the delivery network and operations for routine childhood vaccines in LDCs. It analyzes two important problems using mathematical programming, with an application in the South Pacific nation of Vanuatu. The first problem is to optimize the nation-wide multi-modal vaccine supply chain with drones to deliver vaccines from the national depot to all health zones …

The Three-Year Capstone: A Progression Of Learning In Purdue University’S Theatre Engineering Program, Leigh Witek

Symposium on Education in Entertainment and Engineering

Purdue University’s Theatre Engineering Program capstone combines the yearly production work of the College of Liberal Arts with the final senior design format used in the Colleges of Engineering. By starting their production work after gaining admission to the program, students work on progressively more involved projects throughout their time at Purdue. This poster presentation will examine the lessons learned and challenges faced by Leigh Witek, a recent Theatre Engineering graduate, as she completed each role in the program. She will share how each project informed her understanding of the design process and how a three-year immersion in production work …

Developing Soft Skills With Interdisciplinary Teams In The First Year: Lessons Learned, Christian Rogers

Symposium on Education in Entertainment and Engineering

The academic structure of most universities dictates that a student work with those of their own program and in conjunction with a program that is tangential to theirs. Interdisciplinary educational experiences that provide students with the opportunity to develop soft skills (such as communication, empathy and problem solving) are considered rare but are much more common in the working environment. As an example, working environments such as Universal Creative are comprised of multiple disciplines (i.e. civil engineer, mechanical engineering, illustration, user experience design, etc.) A function of working in an interdisciplinary team can also be to work on unknown or …

Signal Processing Capacity Of The Cellular Sensory Machinery Regulates The Accuracy Of Chemotaxis Under Complex Cues, Hye-Ran Moon, Soutick Saha, Andrew Mugler, Bumsoo Han

Purdue University Libraries Open Access Publishing Fund

Chemotaxis is ubiquitous in many biological processes, but it still remains elusive how cells sense and decipher multiple chemical cues. In this study, we postulate a hypothesis that the chemotactic performance of cells under complex cues is regulated by the signal processing capacity of the cellular sensory machinery. The underlying rationale is that cells in vivo should be able to sense and process multiple chemical cues, whose magnitude and compositions are entangled, to determine their migration direction. We experimentally show that the combination of transforming growth factor-β and epidermal growth factor suppresses the chemotactic performance of cancer cells using independent …

Timing, Latency, And Live Performance, Robert Klimek, Catherine Skokan

Symposium on Education in Entertainment and Engineering

How important is synchronous timing in a performance? In the world of science, engineering and the arts, we cannot avoid it. In the arts, it is a living and vital concept between composer, performer and audience. During the Pandemic, with an increase in virtual meetings and performances, made us more aware of timing issues and introduced us to a path with many questions about latency and affect between audience and performer. The hand waving, head nodding and eye gestures of Renaissance musicians led eventually to the classic conductor’s baton. These all helped ensembles of dissimilar instruments and/or voices, conquer problems …

Catenate: Creating An Interdisciplinary Art Project, Brian Phillips, Melissa Eddings Mancuso, Emma Sherban

Symposium on Education in Entertainment and Engineering

This paper will present the rationale for, the challenges of, and successes encountered in the formation process of an interdisciplinary Visual & Performing Arts Project, Catenate, at Ohio Northern University’s School of Visual & Performing Arts.

A Survey Of Machine Learning Techniques For Video Quality Prediction From Quality Of Delivery Metrics, Obinna Izima, Ruairí De Fréin, Ali Malik

Articles

A growing number of video streaming networks are incorporating machine learning (ML) applications. The growth of video streaming services places enormous pressure on network and video content providers who need to proactively maintain high levels of video quality. ML has been applied to predict the quality of video streams. Quality of delivery (QoD) measurements, which capture the end-to-end performances of network services, have been leveraged in video quality prediction. The drive for end-to-end encryption, for privacy and digital rights management, has brought about a lack of visibility for operators who desire insights from video quality metrics. In response, numerous solutions …

Twisted Laminar Superconducting Composite: Mgb2 Embedded Carbon Nanotube Yarns, Ujjal Lamichhane, Gamage C. Dannangoda, Mkhitar Hobosyan, R. A. Shohan, A. Zakhidov, Karen S. Martirosyan

Physics & Astronomy Faculty Publications

Twisted laminar superconducting composite structures based on multi-wall carbon nanotube (MWCNT) yarns were crafted by integrating magnesium and boron homogeneous mixture into the carbon nanotube (CNT) aerogel sheets. After the ignition of the Mg–B–MWCNT system, under the controlled argon environment, the high exothermic reaction between magnesium (Mg) and boron (B) with stoichiometric ratio produced the MgB2@MWCNT superconducting composite yarns. The process was conducted under the controlled argon environment and uniform heating rate in the differential scanning calorimetry and thermogravimetric analyzer. The XRD analysis confirmed that the produced composite yarns contain nano and microscale inclusions of superconducting phase of MgB2. The …

Improving Project Performance Using Lean Construction In Egypt: A Proposed Framework, Marwa Gamal Swefie

Archived Theses and Dissertations

No abstract provided.