Engineering Commons^™

Electric Vehicle Battery Charging Infrastructure, Javan Paul Luce Tanner

Industrial Technology Master's Projects

The progression away from internal combustion engines has been slowly gaining momentum over the last ten years. This project investigated the pathway forward regarding the charging of electric vehicles. As governments have begun enacting legislative initiatives in support of a greener and more sustainable future, we are now witnessing more rapid progress toward widespread adoption of fully electric and hybrid vehicles. This study focused directly on battery electric vehicles (BEVs). Some automotive manufacturers (each with their own timeframe) have committed to producing only these BEVs, and eliminating traditional combustion engine vehicles. This investigation was designed to examine the current state …

Fabrication Of Alloy 625 Through Electron Beam Powder Bed Fusion Additive Manufacturing, Characterization And Mechanical Performance, Aldo Rubio Hidalgo

Open Access Theses & Dissertations

Electron Beam Powder Bed Fusion (EB-PBF) is an additive manufacturing process that allows for the fabrication of nearly fully dense Alloy 625 parts. In this study EB-PBF Alloy 625 samples were fabricated in an Arcam A2X, heat-treated, then machined and tensile tested. Preliminary process tests varying focus offset, and speed function were conducted to establish baseline process parameter conditions to fabricate Alloy 625 parts based on surface finish and structural defects. The microstructure observed in EB-PBF Alloy 625 parts along the build direction in the as-built state consists of irregularly sized columnar grains averaging 105 μm in width that have …

Radio Direction Finding Implementing Music Algorithm With Usrp Node Arrays, Kevin Valdez

Open Access Theses & Dissertations

Direction Finding techniques are widely used across the fields of radar, telecommunications, geolocation systems, sonar, among many others to estimate the reference position of the incoming signal source. For this, the implementation of antenna arrays is essential as it allows the use of more advanced techniques in signal processing called spatial spectrum estimation [1]. This method of estimation is performed based on the antenna or sensor array response to the signal spatial parameters in every direction and estimate the location of the incoming signals. Algorithms have been developed for the purpose of spatial spectrum analysis, the most popular are MUSIC …

Thermodynamic Modeling Of Aqueous Fe-Cu-As-Sb-Bi-H2so4 Solutions And Its Application For Redox Potential Determination In Copper Electrorefining From 25°C To 70°C, Yongteng Dong

Open Access Theses & Dissertations

Impurity elements in copper electrorefining (ER) electrolyte have been becoming a crucial issue on purity of copper cathode. The objective of this doctoral research is to develop a speciation model to understand impurity behavior in aqueous ER solutions.

A thermodynamic model of Fe(II)-Fe(III)-Cu(II)-H2SO4-H2O system is developed and shown to reliably simulate the species distribution in industrial copper electrorefining electrolyte from 25°C to 70°C. The previously developed model of Fe(II)-Fe(III)-H2SO4-H2O system under leaching conditions was first evaluated. It has proved that its applicability can be extended to much higher acid concentration (185 g/L) and high amount of copper (40-50 g/L). Cu(II) …

Microstructure And Hardness Comparison Of Inconel 625 Alloy Of Various Additive Manufacturing Processes Following Heat Treatments, Ariel Gamon

Open Access Theses & Dissertations

This research study presents experimental examples of as-built microstructures and associated microindentation hardnesses (HV) for a variety of metal additive manufacturing (AM) methods for Inconel 625 alloy. Cold spray (CS), laser powder bed fusion (L-PBF), wire arc additive manufacturing (WAAM), electron beam directed energy deposition (EB-DED), laser hot wire (LHW), binder jetting (BJT), and laser power directed energy deposition (LP-DED), laser wire directed energy deposition (LW-DED) and electron beam melting (EBM) were among the techniques employed. Microstructures varied from impact-bonded, flattened grains containing microdendrites and dislocations with a microindentation hardness of HV 590 for cold spray to large, equiaxed grains …

Environmental Justice Issues And Sea Level Rise In Frontline Communties Along The Gulf Coast, Karla Michel Lopez

Open Access Theses & Dissertations

Sea level rise poses a great threat to coastal areas and our way of life. As flooding increases in frequency and intensity across the country, vulnerable populations become a target to its impacts. The U.S. dedicates much research to risk communication and climate change adaptation strategies; however, these coastal areas are home to a large percentage of underserved and underrepresented communities that can be challenging to meaningfully engage. The impacts of short-term sea level rise combined with long-term sea level rise will not only cause flooding, erosion, and intrusion of saltwater into freshwater resources but also increased financial consequences, such …

Structural Impacts Of Super Heavy Load (Shl) Vehicles On Transportation Infrastructure, Ali Morovatdar

Open Access Theses & Dissertations

Operation of non-conventional Super Heavy Load (SHL) vehicles is an ongoing challenge for transportation stakeholders and the traveling public across the nation. Despite facilitating the movement of heavy, large, and non-divisible loads, passages of such vehicles with complex loading configurations that typically weigh several folds of the permissible weight limits set forth by regulatory agencies have been adversely affecting the structural integrity of pavement facilities. This translates into accelerated damage of pavement structures, which in turn poses safety concerns for users of the transportation facilities. Accurate quantification of such detrimental impacts is the precursor to preserve the existing transportation facilities. …

Evaluation Of Changes In Behavior And Use Of Pou Systems In The Paso Del Norte Region, Arahim Alejandro Zuniga Herrera

Open Access Theses & Dissertations

According to the world health organization around 2.2 billion people in the world lack access to proper water resources with around 500,000 people dying yearly due to contaminated water ingestion. Colonias are unorganized settlements found on the border between the United States and Mexico and are characterized by poor infrastructure and lack of resources such as water. In the past years, several campaigns have been made to provide water filtration systems to residents in the Paso del Norte colonias, located in the border area of Chihuahua, West Texas, and Southern New Mexico.In the time between the summers of 2018 and …

Identification Of Phosphorous Loading Point Source Facilities To 303(D) Listed Nutrient Impaired Waters Through Watershed Delineation Using Arcgis For Life Cycle Assessment Applications, John Zimmerman

Chemical Engineering Undergraduate Honors Theses

The work done for this project is part of a larger “life cycle assessment (LCA) of novel electrochemical phosphorus recovery technology at the wastewater treatment plant and U.S. watershed scales” (Morrissey 2019). The goal of that LCA is to determine “environmental impacts of implementing electrochemical struvite recovery at the wastewater treatment plant, U.S watershed, and global scales” (Morrissey 2019). This project’s goal is to identify locations deemed more sensitive to eutrophication impacts. The results will be used as part of the life cycle inventory (LCI) accounting for geographically explicit phosphorus flows. The waters identified as impaired were sourced from the …

Accelerated Performance Degradation Of Single-Phase Cold Plates For Direct-To-Chip Liquid Cooled Data Centers, Lochan Sai Reddy Chinthaparthy

Mechanical and Aerospace Engineering Theses - Archive

Expanding demands for cloud-based computing and storage, the Internet of Things, and AI-based applications have escalated thermal loads in high-density data centers which necessitated the utilization of more efficient cooling technologies. Direct-to-chip liquid cooling using cold plates has proven to be one of the most efficient methods to dissipate the high heat fluxes of modern high-power CPUs and GPUs. While the published literature has well-documented research on the thermal aspects of direct liquid cooling, a detailed account of reliability degradation is missing. The present investigation provides an in-depth analysis of the reliability degradation of copper cold plates used in high-power …

Creasing Of Polyimide Thin Film For Use In Solar Sails, Andrew Allen

Electronic Theses and Dissertations, 2020-2023

Polymer thin membranes are used in a variety of deployable structures that require large areas and compact stowage. Packaging membrane structures often involves creasing the membrane along predefined fold lines to enforce the desired kinematics under folding action. Inducing permanent deformation by folding to a high curvature is a common method to create creases, particularly in the design of solar sails. The distinct mechanical characteristics at the crease regions have a profound effect on the subsequent deployment and tensioning of the membrane structures. The mechanical and geometric properties at the crease are related to the crease formation process, but the …

Tailoring Of The Left Ventricular Assist Device Cannula Implantation Using Coupled Multi-Scale Multi-Objective Patient Specific Optimization., Abubakar Dankano

Electronic Theses and Dissertations, 2020-2023

Despite advancements in device design and anti-coagulation treatments, there are numerous adverse events that may occur following implantation of LVADs. The most devastating involves the embolization of thrombus into the brain causing a stroke, with incidence of up to 14-47% over a 6–12-month period. This study aims to elucidate ways to reduce this risk by surgical maneuvers guided by a multi-scale computational fluid dynamics analysis wrapped around a multi-objective shape optimization scheme which optimizes the anastomosis location of the VAD outflow graft (OG) along the ascending aorta to minimize the incidence of thrombi reaching the cerebral vessels and reduce particle …

Change Sustainment Model (Csm) To Address Industry 4.0 In A Classified Environment, Hamilton Ervin

Electronic Theses and Dissertations, 2020-2023

Business and engineering have long intersected with each other in industry. In actuality, they are inseparable. That notion drove the thought process and actions taken to observe phenomena within a U.S. Fortune 500, Aerospace & Defense industry, Department of Defense, independent contractor. In Aerospace & Defense, the ability to implement technology freely and change to address an ever-evolving technological landscape in the world has proven to be difficult given the nature of the work performed. U.S. national security must be protected at all times, therefore information sharing guided by a "need-to-know" basis create an inability to easily implement organizational change …

Topology Optimization Of Internal Cooling Channels In Turbulent Flows, Shinjan Ghosh

Electronic Theses and Dissertations, 2020-2023

Topology optimization, introduced by Bendsoe and Sigmund in 1988 has been a topic of research in the structural mechanics field for several decades. This technique is commonly used to optimize system performance of structural components with minimum material usage by varying the distribution of materials in a given domain. Fluid dynamic topology optimization, a relatively new research topic uses a method of adding or subtracting materials to a given flow domain to obtain an optimal flow-path for a given objective function. While the structural TO creates a solid structure by introducing holes into the domain, fluid TO introduces solid into …

Acoustoelectric Amplification In Piezoelectric-Silicon Micromachined Lamb Wave Devices, Hakhamanesh Mansoorzare

Electronic Theses and Dissertations, 2020-2023

In this dissertation, heterostructured micro-acoustic devices are explored that leverage the interactions between acoustic phonons and electrons to enable radio frequency (RF) signal amplification or attenuation. Thin films of piezoelectric and semiconductor material are tailored into a heterostructure that allows for a strong acoustoelectric (AE) effect due to the combination of high electromechanical coupling and high electron drift velocity in said films respectively. In such devices, the relative electron drift and acoustic velocities could determine whether the RF signal undergoes AE gain or loss, rendering the device non-reciprocal. This is a highly sought-after property for building isolators and circulators which …

Data Driven Methods For Large Scale Network Level Traffic Modeling, Rezaur Rahman

Electronic Theses and Dissertations, 2020-2023

Rapid growth in population along with urban-centric activities impose a massive demand on existing transportation systems, thus increasing traffic congestion and other mobility related challenges. To overcome such challenges, we need network-scale models to accurately predict real-time traffic demand and associated congestion. However, traditional network modeling approaches have shortcomings due to the complexity in traffic flow modeling, limited scope to incorporate real-time data available from emerging data sources and requiring excessive computation time to generate accurate estimation of traffic flows. Advancement in traffic sensing technologies with big data has created a new opportunity to overcome these challenges and implement deployable …

Self Adaptive Reinforcement Learning For High-Dimensional Stochastic Systems With Application To Robotic Control, Sayyed Jaffar Ali Raza

Electronic Theses and Dissertations, 2020-2023

A long standing goal in the field of artificial intelligence (AI) is to develop agents that can perceive richer problem space and effortlessly plan their activity in minimal duration. Several strides have been made towards this goal over the last few years due to simultaneous advances in compute power, optimized algorithms, and most importantly evident success of AI based machines in nearly every discipline. The progress has been especially rapid in area of reinforcement learning (RL) where computers can now plan-ahead their activities and outperform their human rivals in complex problem domains like chess or Go game. However, despite encouraging …

Temperature And Strain Sensing With Hybrid Interferometer, Lashari Ghulam Abbas, Zhou Ai, Farhan Mumtaz, Atta Muhammad, Yutang Dai, Rashda Parveen

Electrical and Computer Engineering Faculty Research & Creative Works

A hybrid interferometer for simultaneous measurement of strain and temperature is proposed and investigated experimentally. This hybrid design is composed of Fabry-Perot interferometer (FPI) and Michelson Interferometer (MI) cascaded with each other. It is developed by fusion splicing a single mode fiber (SMF), a multimode fiber (MMF), a dual side hole fiber (DSHF), a hollow core fiber (HCF) and a tapered-SMF. The tapered SMF was inserted into the HCF to form a reflection mirror for the FPI. The maximum temperature and strain sensitivity of the hybrid interferometer achieved through experiments is 11.6 pm/°C and 6.8 pm/mu varepsilon , respectively. The …

Approaching The Fundamental Limit Of Orbital-Angular-Momentum Multiplexing Through A Hologram Metasurface, Shuai S.A. Yuan, Jie Wu, Menglin L.N. Chen, Zhihao Lan, Liang Zhang, Sheng Sun, Zhixiang Huang, Xiaoming Chen, Shilie Zheng, Li (Lijun) Jun Jiang, Xianmin Zhang, Wei E.I. Sha

Electrical and Computer Engineering Faculty Research & Creative Works

Establishing and approaching the fundamental limit of orbital-angular-momentum (OAM) multiplexing are necessary and increasingly urgent for current multiple-input multiple-output research. In this work, we elaborate the fundamental limit in terms of independent scattering channels (or the degrees of freedom of scattered fields) through angular-spectral analysis, in conjunction with a rigorous Green's function method. The scattering-channel limit is universal for arbitrary spatial-mode multiplexing, which is launched by a planar electromagnetic device, such as antenna, metasurface, etc., with a predefined physical size. As a proof of concept, we demonstrate both theoretically and experimentally the limit by a phase-only metasurface hologram that transforms …

Water Recovery From Bioreactor Mixed Liquors Using Forward Osmosis With Polyelectrolyte Draw Solutions, Calen Raulerson

All Theses

The objective of this research was to test the feasibility of using forward osmosis (FO) with polyelectrolyte draw solutions to recover water from bioreactor mixed liquors. When combined with an Anaerobic Osmotic Membrane Bioreactor (AnOMBR), such a system could process fecal and food waste from astronauts aboard the International Space Station (ISS) and reclaim important nutrients and water. This project focused on measuring the obtainable water recovery rates from bioreactor effluent, and the identifying challenges associated with the operation.

AnOMBRs feature several advantages over aerobic bioreactors, and non-osmotic anaerobic membrane bioreactors (AnMBR). Anaerobic bioreactors avoid the significant energy costs of …

Development And Application Of A Digital Twin For Chiller Plant Performance Assessment, Mihir Kale

All Theses

As the complexity of industrial equipment continues to increase, the management of the individual machines and integrated operations becomes difficult without computer tools. The availability of streaming data from manufacturing floors, plant operations, and deployed fleets can be overwhelming to analyze, although it provides opportunities to improve performance. The use of dedicated monitoring systems in the plant and field to troubleshoot machinery can be integrated within a product lifecycle management (PLM) architecture to offer greater features. PLM offers virtual processes and software tools for the design, analysis, monitoring, and support of engineering systems and products. Within this paradigm, a digital …

Autonomous Guidance Of Unmanned Combat Air Vehicles In Basic Fighter Maneuvering, Jeffery G. Dean

Mechanical and Aerospace Engineering Dissertations - Archive

Basic fighter maneuvering, or BFM, is the dynamic engagement of two or more aircraft in close-range air combat. The relatively recent introduction of advanced unmanned combat air vehicles (UCAVs) has opened the possibility for automated systems to be players in this arena of air-to-air combat, which has thus far been limited to manned aircraft. In order to design an unmanned system that could fight and win a BFM engagement, the system must include an advanced system for guidance. This dissertation leverages techniques from gain scheduling and incorporates adjustable aimpoint guidance, in order to address the capability for UCAVs to execute …

Integrating Degradation Forecasting And Abatement Framework Into Advanced Distribution Management System, Huu Phuong Hoang

All Dissertations

Future distribution grids are expected to face an increasing penetration of heterogeneous distributed energy resources (DERs) and electric vehicles (EVs). This landscape change will pose challenges to the control and management of distribution grids because of the variability of renewable energy resources and EV charging. In addition, multiple DERs dispersed over networks can also challenge the grid operation and maintenance as various DERs at various locations are needed to be monitored and managed. However, customers will not be content with reductions in power quality, reliability, economy, safety, or security. To enhance the effectiveness of grid control and management, future grids …

Chess Piece Detection, Craig Reid Belshe

Electrical Engineering

This project determines the positions of each piece on a physical chessboard, so that a computer can record a game of chess by noting down the piece positions at the end of each turn. It determines each move so that the game can be replayed later without watching actual footage. The project allows for easy viewing of past games. An image of the chessboard is analyzed to detect each square on the board, and each piece's location. This is then done for each turn, so that the system can keep track of an entire game.

Ac/Dc Led Light Bulb Adaptor With Internal Rechargeable Batteries, Esteban A. Rubio, Matthew R. Delaby

Electrical Engineering

To make a sustainable product and provide a temporary source of lights on during emergencies, this project aims to create a small unit that can be attached to a light bulb of any variety and connect it to a socket. Within the device is a rechargeable battery that, when the device is not connected to an 120V AC, 240V AC, or 48V DC power source, will power the light for a short period of time. The battery can be charged during the standard operation of the device and can be powered by the US and EU standard outlet voltages as …

Raising The Level Of Environmental Concern Of Senior Students Taking The Electronics Engineering Laws And Ethics Through Climate Change Awareness Study, King Harold A. Recto, Romano Q. Neyra

Electronics, Computer, and Communications Engineering Faculty Publications

Two general areas that future electronics engineers are honed are competence and character. Most of the courses he takes fall in the general area of competence. This includes subjects like Circuit Theory, Electronic Design and Analysis, Communication Systems, and the like. Subjects dealing with character, in contrast, are limited. In some universities, it may just be Electronics Engineering (ECE) Laws and Ethics and the focus is on “engineering made by man for man.” In this traditional view of Engineering, the environment is often neglected since it’s not about “man” (as opposed to the “society”). Over the last years, however, concerns …

Directional Spectral Solar Energy For Building Performance: From Simulation To Cyber-Physical Prototype, Joseph Del Rocco

Electronic Theses and Dissertations, 2020-2023

The original research and development in this dissertation contributes to the field of building performance by actively harnessing a wider spectrum of directional solar radiation for use in buildings. Solar radiation (energy) is often grouped by wavelength measurement into the spectra ultraviolet (UV), visible (light), and short and long-wave infrared (heat) on the electromagnetic spectrum. While some of this energy is directly absorbed or deflected by our atmosphere, most of it passes through, scatters about, and collides with our planet. Modern building performance simulations, tools, and control systems often oversimplify this energy into scalar values for light and heat, when …

Sensing Small Interaction Forces Through Proprioception, Fazlur Rashid, Devin Michael Burns, Yun Seong Song

Psychological Science Faculty Research & Creative Works

Understanding the human motor control strategy during physical interaction tasks is crucial for developing future robots for physical human-robot interaction (pHRI). In physical human-human interaction (pHHI), small interaction forces are known to convey their intent between the partners for effective motor communication. The aim of this work is to investigate what affects the human's sensitivity to the externally applied interaction forces. The hypothesis is that one way the small interaction forces are sensed is through the movement of the arm and the resulting proprioceptive signals. A pHRI setup was used to provide small interaction forces to the hand of seated …

A Comprehensive Analysis Of Reward Function For Adaptive Traffic Signal Control, Abu Rafe Md Jamil, Naushin Nower

Knowledge Engineering and Data Science

Adaptive traffic control systems (ATCS) can play an essential role in reducing traffic congestion in urban areas. The main challenge for ATSC is to determine the proper signal timing. Recently, Deep Reinforcement Learning (DRL) has been used to determine proper signal timing. However, the success of the DRL algorithm depends on the appropriate reward function design. There exist various reward functions for ATSC in the existing research. This research presents a comprehensive analysis of the widely used reward function. The pros and cons of various reward algorithms were discussed, and experimental analysis shows that the multi-objective reward function enhances the …

Similarity Identification Of Large-Scale Biomedical Documents Using Cosine Similarity And Parallel Computing, Merlinda Wibowo, Christoph Quix, Nur Syahela Hussien, Herman Yuliansyah, Faisal Dharma Adhinata

Knowledge Engineering and Data Science

Document similarity computation is an important research topic in information retrieval, and it is a crucial issue for automatic document categorization. The similarity value is between 0 and 1, then the closest value to 1 is represented both documents is considered more relevant, vice versa. However, the large scale of textual information has created the problem of finding the relevance level between documents. Therefore, the relevance between mesh heading text in the PubMed documents is higher than the relevance of the abstract text in the PubMed documents. Furthermore, parallel computing is implemented to speed up the large-scale documents similarity identification …