Engineering Commons^™

Influential Factors Of The Electromagnetic Wave Instrument While Drilling In Coal Seam Horizontal Wells And Resistivity Simulation Calculation, Chen Gang, Zhang Jiguan, Li Quanxin, Liu Zhiyi

Coal Geology & Exploration

In order to figure out the influential factors of the detection by the electromagnetic wave instrument while drilling in coal seam horizontal wells, we studied the impacts of roof and floor surrounding rock resistivity, instrument eccentricity, coal seam borehole collapse and coal seam thickness on the measurement of resistivity through finite element numerical simulation. The resistivity response law of the amplitude ratio and phase difference calculation under the condition of high-resistivity coal rock formation was analyzed. On this basis, a three-layer geological mathematical model was established to simulate the difference between analytical and numerical solutions of the amplitude ratio and …

Application Research On Dynamic Calibration And Prediction Technology Of Coal Seam In Coalmine Working Face, Liu Wenming, Gao Yaoquan, Jiang Bici, Li Peng, Xue Wuqiang

Coal Geology & Exploration

One of the prominent problems of intelligent mining is its inadaptability to geological conditions, especially for the absolute accuracy of coal seam floor and thickness. 3D seismic has a high horizontal resolution and it can control the ups and downs of the coal seam. However, due to the time domain data, the calculation of the coal seam floor elevation is negatively affected by the time-depth conversion point. On the basis of the 3D seismic data of the working face and the coal thickness data during the mining process, the absolute accuracy of the time-depth conversion of the coal seam floor …

Optimization Of Surface Directional Wells For Water Control Based On Three-Dimensional Seismic Dynamic Geological Modeling, Lu Ziqing, Gao Yaoquan, Guo Yuan

Coal Geology & Exploration

In the treatment of high-pressure Ordovician limestone water in the coal seam floor, the design and construction optimization of surface directional wells mainly relies on two-dimensional AutoCAD geological drawings. For the avoidance of such problems as low drilling rate and off-target in the target area under complex geological conditions, and to improve the effect of precise targeted water hazard control, a technology for optimizing directional wells for water hazard prevention and control based on seismic dynamic modeling is proposed. By comparing and analyzing the current situation and problems of drilling trajectory design and optimization technology, it is pointed out that …

Examining The Effect Of A Chitosan Biopolymer On Alkali-Activated Inorganic Material For Aqueous Pb(Ii) And Zn(Ii) Sorption, Sukanta K. Mondal, Chenglin Wu, Felix C. Nwadire, Ali A. Rownaghi, Aditya Kumar, Yusuf Adewuyi, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Biopolymers and alkali-activated materials have attracted a great deal of attention as adsorbents for the removal of heavy metal contaminants from aqueous solutions. Both materials are sustainable and feature unique properties, but biopolymers are relatively more expensive or difficult to prepare and exhibit low mechanical and surface properties, a narrow pH range, and thermal stability. In this study, hybrid adsorbents were prepared from both types of material, by alkali activation of low-cost fly ash precursors accompanied by incorporation of 0-2%mass chitosan biopolymer. Two types of alkaline activating solutions, NaOH and Na2SiO3, were employed to generate two sets of hybrid adsorbents …

Numerical Investigation On Blast Response Of Cold-Formed Steel Framing Protected With Functionally Graded Composite Material, Elias Ali

Faculty Scholarship

This paper presents a numerical simulation on the blast response of cold-formed steel (CFS) structural framing system protected with a functionally graded composite material (FGM) panel. The steel frame consists of four CFS studs, which were protected by 12.5 mm thick gypsum, aluminum composite, and FGM composite materials on both sides. The numerical simulation was performed using ABAQUS on a 1.8 m × 2.4 m, overall wall panel exposed to air blast on one side. A 1.0 kg TNT explosive charge placed at four standoff distances (R) of 1.0 m, 1.5 m, 2.0 m, and 2.5 m from the framing …

Development And Application Of Zdy4500lfk Full Automatic Drilling Rig, Dong Hongbo, Fan Qiang, Li Kun, Ma Bin

Coal Geology & Exploration

The ZDY4500LFK full automatic drilling rig was developed and equipped with a surface monitoring and control system to improve the automation of various drilling works and reduce the number of underground workers, then accelerate the intelligent construction of coal mines and meet the demand for the construction of transparent geological security system in mines. In consideration of the key technical problems encountered in the drilling construction of the drilling rig in the transparent geological guarantee system in Tangjiahui Coal Mine of Huaihe Energy West Coal and Electricity Group, such key technologies as row positioning technology and automatic unloading buckle were …

Prevention And Control Technology Of Ordovician Water In Tangjiahui Coal Mine Based On Transparent Geology, Gao Yaoquan, Gao Yingui, Lu Ziqing, Kong Wanjun

Coal Geology & Exploration

The problems of many water diversion faults and, concealed water diversion structure have led to the difficulty of water disaster prevention and control of Ordovician limestone in No.6 coal seam in Tangjiahui Coal Mine. After continuous exploration and practice, a variety of advanced technologies has been introduced to obtain a large number of geological and hydrogeological data, and construct an intelligent geological guarantee system. The technical ideas of “geophysical and drilling exploration, joint grouting treatment up-hole and down-hole, in-hole transient electromagnetic fine exploration, inter-hole resistivity detection of grouting effect, and joint monitoring of coal seam floor by micro-seismic and electromagnetic …

Construction Method Of Transparent Working Face Based On Borehole Radar, Jiang Bici, Cheng Jianyuan, Li Ping, Liu Wenming, Yu Junhui, Wu Guoqing

Coal Geology & Exploration

The high-precision detection of coal rock interface is the key and difficult point to construct the three-dimensional geological model of intelligent mining. A method is proposed to construct regional coal rock interface geological model and realize transparent working face by using single hole reflection radar in the hole along coal seam and multi hole detection results. For single borehole radar data, the coal seam radar wave velocity is calculated by using the slope of roadway wave in-phase axis, and the spatial constrained migration imaging is used to realize the accurate calculating of coal seam top/floor reflection interface. Three transparent working …

Construction Method On Transparent Geological Guarantee Technologies: A Case Study Of Wuhai Mining Area, Gu Baoze, Dai Zhenhua, Li Mingxing, Chen Baohui

Coal Geology & Exploration

Coal geological guarantee technologies are applied in the whole life cycle of the coal industry. The technologies are the basis and premise of realizing safe, efficient, intelligent and green mining of coal resources, and plays a key role in disaster prevention, hidden disaster-causing factor detection and intelligent mining of coal. Without any doubt, geological transparency is the crucial task to improve the ability of intelligent analysis and decision-making, automatic and precise control, and efficient coal mining. For the purpose of solving the problems faced by Wuhai Mining Area in the construction of coal mine intellectualization, such as complex geological conditions …

Feasibility Study Of The Metaverse Technology In Coal Mine Emergency Training And Drills, Guo Yangyang

Coal Geology & Exploration

Coal mine safety training and emergency drills are effective measures to prevent disasters and accidents. At this stage, however, there are problems such as the boring training content, drills emphasizing “performance” rather than “practice”, and formalism. Metaverse technology integrates VR, AR, 3D, blockchain, Internet of things, AI, digital twin and other technologies, therefore, it is characterized by intuitiveness, strong interaction and high knowledge conversion rate in coal mine safety training and emergency drills, which can well solve the above problems. Now the metaverse technology is increasingly mature from hardware, software to various supporting facilities, while it is still faced with …

Exciton Delocalization In A Dna-Templated Organic Semiconductor Dimer Assembly, Xiao Wang, Ruojie Sha, William B. Knowlton, Nadrian C. Seeman, James W. Canary, Bernard Yurke

Materials Science and Engineering Faculty Publications and Presentations

A chiral dimer of an organic semiconductor was assembled from octaniline (octamer of polyaniline) conjugated to DNA. Facile reconfiguration between the monomer and dimer of octaniline–DNA was achieved. The geometry of the dimer and the exciton coupling between octaniline molecules in the assembly was studied both experimentally and theoretically. The octaniline dimer was readily switched between different electronic states by protonic doping and exhibited a Davydov splitting comparable to those previously reported for DNA–dye systems employing dyes with strong transition dipoles. This approach provides a possible platform for studying the fundamental properties of organic semiconductors with DNA-templated assemblies, which serve …

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Characteristics And Detection Performance Of The Source Of Seismic While Excavating In Underground Coal Mines, Wang Baoli, Cheng Jianyuan, Jin Dan, Yang Xiaogang, Yang Hui

Coal Geology & Exploration

Against a background of intelligent coal mines, seismic while excavating has become one of the key geological guarantee technologies for safe excavation in the mining face. It can detect hidden geological structures in real-time, in advance and finely, such as goafs, faults, and collapsed columns, effectively promoting safe and efficient excavation and production. Different from the widely used advanced detection technology of reflection in-seam wave, the vibration signal of the tunneling machine is used as the excitation source, which replaces the explosive source in conventional seismic exploration. It has the advantages of environmental frendliness, safety, low cost, recyclability and combined …

Application Of Borehole Transient Electromagnetic Method In Detecting The Cross-Border Mining Goaf, Fan Tao, Li Ping, Zhao Zhao, Li Wei, Zhao Rui, Zhang Peng, Yao Weihua, Li Yuteng, Fang Zhe

Coal Geology & Exploration

Cross-border mining in underground coal mines disrupts the order of coal resource development, and has huge hidden safety danger. Accurate detection of goafs caused by cross-border mining and their boundaries is extremely important for safe mining. Conventional mine transient electromagnetic detection methods are susceptible to interference from metal and electromagnetic signals in the roadway, and its detection accuracy is limited, which makes it difficult to meet the needs of accurate interpretation of goaf boundary. For the purpose of solving this problem, a drilling transient electromagnetic method and construction technology for transmitting and receiving signals in drilling is proposed to increase …

Application Of Reflected In-Seam Wave Detection For Small Faults In Thick Coal Seams, Su Xiaoyun

Coal Geology & Exploration

In general, the fault distance and extension length of small faults in the working face of thick coal seams and extremely thick coal seams are short. Due to the limitation of resolution, it is generally difficult to detect such small faults with current methods and instruments. The unclear detection of small faults will have a great impact on the efficient recovery of the intelligent working face. To solve this problem, the numerical simulation and field experiment of small fault reflected in-seam wave detection in the thick coal seam are carried out. In terms of numerical simulation, the three-component elastic wave …

Application Of Mine-Used Resistivity Monitoring System In Working Face Water Disaster Control, Lu Jingjin, Wang Bingchun, Li Deshan, Duan Jianhua

Coal Geology & Exploration

The geological transparency of water disasters is in urgent need to serve the intelligent and unmanned mining of coal mines. Focused on the water disasters during mining in the working face, the mine-used resistivity monitoring system uses pseudo-random signal transmission and full waveform data acquisition to improve the anti-interference ability of the equipment. Electrode grounding condition consistency correction and monitoring data normalization are used to suppress false anomalies. Time-lapse resistivity imaging is used to identify and extract the abnormal resistivity response of hidden water hazards. The monitoring system is able to estimate the risk of water disasters by monitoring the …

Resistivity Detection And Its Application In Underground Coal Mine Directional Boreholes, Li Bofan, Liu Lei, Fan Tao, Jiang Qiping, Wang Jie

Coal Geology & Exploration

The working face threatened by high gas or Ordovician limestone water pressure generally adopts directional drilling technology to carry out fracturing or grouting works at the bottom of the working face before mining to ensure the safety of mining. In-hole probing in directional boreholes in the bottom plate can reveal the hidden structures in the working face in a more detailed way, and can also realize “one hole for multiple uses”. In order to solve the detection problem in the directional drilling, a method of DC resistivity detection in the horizontal directional drilling is proposed. To solve the problem of …

Research On Key Technologies Of The Zdy25000ldk Intelligent Directional Drilling Equipment, Fang Peng, Yao Ke, Wang Longpeng, Zhang Rui, Meng Rui, Wang Song, Shao Junjie, Liu Pu

Coal Geology & Exploration

It is the most direct and effective method to extract coalbed methane by drilling along the coal seam and high-level drilling on the roof for comprehensive treatment of coalbed methane in underground coal mines. Improving the drilling speed of directional drilling and the drilling encounter rate in the coal seam of uneven thickness with large fluctuation, reducing the labor intensity of the personnel, enhancing the ability to prevent drilling accidents, and adapting to the intelligent development needs of coal mines, the intelligent drilling equipment for long-distance directional drilling in coal mines are all the important problems to be solved in …

Development Of A Remote Monitoring System For Coal Mine Automatic Drilling Rigs, Wang Tianlong, Ma Bin, Dong Hongbo

Coal Geology & Exploration

According to the policies on the manufacturing of national energy equipment, coal mine robots and intelligent development of coal mines as well as the trend of intelligent development of coal equipment, a remote monitoring system of automatic drilling rigs for coal mines is developed to monitor the automatic drilling rig remotely on the ground by using sensor measurement, software development, virtual reality, network communication, video monitoring and other technologies. The problems of incomplete parameter display, insufficient effective monitoring and inconvenient maintenance of the existing underground coal mine drilling rig are solved. The remote monitoring system includes the main rig, onboard …

Development And Application Of A Mine-Used Dynamic Azimuth Gamma Instrument While Drilling, Chen Long, Chen Gang, Zhang Jiguan

Coal Geology & Exploration

Gas drainage borehole along coal seams is the most direct and effective gas control method at present. As a common basis for identifying coal bearing formations, natural gamma can tell whether the borehole trajectory is in the target layer according to the formation radioactivity. However, the existing mine-used gamma logging tools can only carry out sliding drilling measurement, which are not applicable to compound drilling or rotary steering drilling, and cannot meet the working condition of continuous gamma dynamic measurement. On the basis of the analysis of the characteristics of the working conditions of MWD and the principle of gamma …

Key Technologies And Engineering Practice Of 3d Laser Scanning In Coal Mine Roadways, Wang Haijun, Liu Zaibin, Lei Xiaorong, Han Baoshan, Lu Ziqing

Coal Geology & Exploration

Intelligent and unmanned mining is an inevitable trend in the development of the coal industry. Precise geological information detection is one of the current key research and development directions in the construction of smart coal mines. The precise detection of information on roadways and the rapid acquisition of three-dimensional roadway models are important data sources for geological transparence. Through a comparative analysis of traditional roadway modeling methods and their advantages and disadvantages, a technical idea of using three-dimensional laser scanning reconstruction technology to construct a high-precision transparent working face roadway model is proposed. On the basis of the analysis of …

Design And Implementation Of The Geological Guarantee System Architecture Based On Microservices, Li Peng, Cheng Jianyuan

Coal Geology & Exploration

The geological guarantee system is very important for safety production in coal mines. In view of the problems faced by the software development of the system, such as diverse data sources, inconsistent language for integrated development of the geological monitoring system and poor adaptability of the geological support platform in different coal mines caused by customized software development, a three-tier development architecture of the geological support system based on microservices is proposed, which includes an application tier, a platform tier and an infrastructure tier. On the basis of the microservices, the integrated development process of the geological support system is …

Strategic Energy Master Planning For Carbon Neutrality, Marie Patterson

CSU Journal of Sustainability and Climate Change

Universities across the United States are generating goals to be more sustainable and carbon neutral. The energy used in existing buildings on campuses amount to a large volume of greenhouse emissions and must be reduced to help achieve neutrality goals. Strategic Energy Master Plans are instrumental to support these goals through the development of recommendations to reduce energy. Calculating the energy use intensity for existing buildings, a main component of a Strategic Energy Master Plan, can help the campus understand where energy is being used the most. With this information the highest energy consuming buildings can be the focus of …

Qualitative Findings From The Practice Of Outsourcing By The Aviation Technical Services Industry In Northern Europe: Comparison With Literature, Jukka Holkeri

Journal of Aviation Technology and Engineering

The outsourcing of maintenance and other technical services is a trend in both military and civil aviation. This article uses input from real outsourcing cases in Northern Europe to verify previous literature findings and to introduce new viewpoints to fill an identified research gap.

Interviews of deeply involved individuals from six cases were selected and analyzed using the Delphi method. The findings were synthesized using a framework that articulates contexts, observed outcomes, and generative mechanisms.

Many of the key literature findings were verified by this case analysis, but there were also some contradictions and new observations that had not been …

Modeling Vapor Transfer In Soil Water And Heat Simulations: A Modularized, Partially-Coupled Approach, Zhuangji Wang, Dennis Timlin, David Fleisher, Wenguang Sun, Sahila Beegum, Sanai Li, Ya Chen, Vandimalla R. Reddy, Katherine Tully, Robert Horton

Nebraska Water Center: Faculty Publications

Coupled water and heat transfer models are widely used to analyze soil water content and temperature dynamics, evaluate agricultural management systems, and support crop growth modelling. In relatively dry soils, vapor transfer, rather than liquid water flux, becomes the main pathway for water redistribution. However, in some modularized soil simulators, e.g., 2DSOIL (Timlin et al., 1996), vapor transfer is not included, which may induce errors in soil water and heat modelling. Directly embedding vapor transfer into existing water and heat transfer modules may violate the modularized architecture of those simulators. Therefore, the objectives of this study are to design a …

Transformers In Medical Imaging: A Survey, Fahad Shamshad, Salman Khan, Syed Waqas Zamir, Muhammad Haris Khan, Munawar Hayat, Fahad Shahbaz Khan, Huazhu Fu

Computer Vision Faculty Publications

Following unprecedented success on the natural language tasks, Transformers have been successfully applied to several computer vision problems, achieving state-of-the-art results and prompting researchers to reconsider the supremacy of convolutional neural networks (CNNs) as de facto operators. Capitalizing on these advances in computer vision, the medical imaging field has also witnessed growing interest for Transformers that can capture global context compared to CNNs with local receptive fields. Inspired from this transition, in this survey, we attempt to provide a comprehensive review of the applications of Transformers in medical imaging covering various aspects, ranging from recently proposed architectural designs to unsolved …

Generalized Cost-Effectiveness Of Residential Wind Mitigation Strategies For Wood-Frame, Single Family House In The Usa, Fatemeh Orooji, Carol J. Friedland, Rose Dominic Savio, Arash Taghinezhad, Carol C. Massarra, Nazla Bushra, Robert V. Rohli

Faculty Publications

Wind is one of the deadliest and most expensive hazards in the United States. Wind hazards cause significant damage to buildings and economic losses to homeowners. Economic losses average approximately $3.8 billion annually from hurricane winds and are not decreasing, even despite enhanced construction practices to reduce wind damage. Thus, the effectiveness of mitigation strategies should be evaluated in order to lower the cost incurred by this hazard. Several studies have suggested building code improvements to mitigate the wind hazard, this additional comprehensive research provides selecting economically beneficial mitigation strategies to consider in building code revisions. In a step toward …

Optimization Of A Smart Sensor Wearable Knee Sleeve For Measuring Skin Strain To Determine Joint Biomechanics, David Steven Wood

Theses and Dissertations

This work addresses three objectives related to the design and modeling of an instrumented knee sleeve and its high deflection strain gauges for at-home knee rehabilitation. First, a multi-objective Bayesian approach was developed to economically optimize a high deflection strain gauge's mechanical and electrical behavior. Four objective functions were simultaneously optimized with two design variables in seven iterations; 90% faster than a grid search approach. The presented algorithm adjusts variables in the manufacturing process of high deflection strain gauges and produces a sensor with optimized properties for a predetermined purpose. Second, an algorithm was created to accurately approximate the dynamic …

Resolving The Three-Dimensional Rotational And Translational Dynamics Of Single Molecules Using Radially And Azimuthally Polarized Fluorescence, Oumeng Zhang, Weiyan Zhou, Jin Lu, Tingting Wu, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

We report a radially and azimuthally polarized (raPol) microscope for high detection and estimation performance in single-molecule orientation-localization microscopy (SMOLM). With 5000 photons detected from Nile red (NR) transiently bound within supported lipid bilayers (SLBs), raPol SMOLM achieves 2.9 nm localization precision, 1.5° orientation precision, and 0.17 sr precision in estimating rotational wobble. Within DPPC SLBs, SMOLM imaging reveals the existence of randomly oriented binding pockets that prevent NR from freely exploring all orientations. Treating the SLBs with cholesterol-loaded methyl-β-cyclodextrin (MβCD-chol) causes NR’s orientational diffusion to be dramatically reduced, but curiously NR’s median lateral displacements drastically increase from 20.8 to …

Stabilizing The Interface Of All-Solid-State Electrolytes Against Cathode Electrodes By Atomic Layer Deposition, Ye Jin, Han Yu, Xiaoqing He, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

In recent years, with the severe safety problems of organic electrolytes, all-solid-state electrolytes (ASSEs) have been considered as an appealing choice to replace organic electrolytes due to their high reliability and safety. However, the uncontrolled interfacial chemical reactions between electrodes and ASSEs would lead to high interfacial resistance, which is detrimental for the battery performance. In this work, LiFePO₄ (LFP) particles were coated with ultra-thin ZrO₂ films by atomic layer deposition (ALD) and the effects of thin film coating on the electrochemical performance of lithium-ion batteries using the NASICON-type Li_1.5Al_0.5Ge_1.5(PO₄) …