Engineering Commons^™

Flow Structure And Surface Heat Transfer From Numerical Predictions For A Double Wall Effusion Plate With Impingement Jet Array Cooling, Hwabhin Kwon, Phillip M. Ligrani, Sneha Reddy Vanga, Heesung Park

PRC-Affiliated Research

To provide additional understanding of double wall cooling arrangements, especially local distributions of flow properties which are responsible for hot-side surface and cold-side surface heat transfer variations, investigated are numerically-simulated distributions of turbulent flow structural characteristics. Also considered are numerically-simulated surface heat transfer characteristics, including comparisons with experimentally-measured distributions. The numerical results are obtained using the ANSYS FLUENT Version 19.1 numerical code, with a k-ω SST turbulence model. The present arrangement includes a full-coverage effusion cooling plate, with coolant initially supplied by an impingement jet array. Considered are the effects of effusion blowing ratio, impingement jet Reynolds number, and streamwise …

Development Of Custom Wall-Less Cardiovascular Flow Phantoms With Tissue-Mimicking Gel, Megan Laughlin, Sam E. Stephens, Jamie A. Hestekin, Morten O. Jensen

Biomedical Engineering Faculty Publications and Presentations

Purpose

Flow phantoms are used in experimental settings to aid in the simulation of blood flow. Custom geometries are available, but current phantom materials present issues with degradability and/or mimicking the mechanical properties of human tissue. In this study, a method of fabricating custom wall-less flow phantoms from a tissue-mimicking gel using 3D printed inserts is developed.

Methods

A 3D blood vessel geometry example of a bifurcated artery model was 3D printed in polyvinyl alcohol, embedded in tissue-mimicking gel, and subsequently dissolved to create a phantom. Uniaxial compression testing was performed to determine the Young’s moduli of the five gel …

Glycerol-Driven Denitratation: Process Kinetics, Microbial Ecology, And Operational Controls, Matthew Baideme, Chenghua Long, Luke Plante, Jeffrey A. Starke, Michael A. Butkus, Katrik Chandran

Civil and Environmental Engineering Faculty Research and Publications

Denitratation, the selective reduction of nitrate to nitrite, is a novel process and when coupled with anaerobic ammonium oxidation (anammox) could achieve resource-efficient biological nitrogen removal of ammonium- and nitrate-laden waste streams. Using a fundamentally-based, first principles approach, this study optimized a stoichiometrically-limited, glycerol-driven denitratation process and characterized mechanisms supporting nitrite accumulation with results that aligned with expectations. At the optimal influent chemical oxygen demand to nitrate ratio of 3.0 : 1 identified, glycerol supported selective nitrate reduction to nitrite (nitrite accumulation ratio, NAR = 62%) and near-complete nitrate conversion (nitrate reduction ratio, NRR = 96%), indicating its viability in …

Optimum Design Of Half Tunnels For Transportation In The Himalayas, Muhammad Zaka Emad, Muhammad Usman Khan, Muhammad Azeem Raza, Saqib Ahmad Saki, Muhammad Aijaz, Muhammad Usman Tahir

Mining Engineering Faculty Research & Creative Works

Numerical modeling is a fine tool for the assessment of inaccessible zones or unforeseen conditions in geotechnical engineering. When modeling structures in rocks, the laboratory-determined properties must be factored as per rock mass classification. The joints present in rock mass can be utilized for assessment of wedges forming around the tunnels. Half tunnels or overhanging tunnels are constructed in steep rock slopes through slot cutting. This develops overhanging cliff in hard rocks that looked like a half tunnel. Half tunnels have advantage over conventional tunnels or open excavations as they require less excavation. The current construction practice of half tunnels …

Novel Tri-Viscous Model To Simulate Pumping Of Flowable Concrete Through Characterization Of Lubrication Layer And Plug Zones, Tooran Tavangar, Masoud Hosseinpoor, Ammar Yahia, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

In this study, computational fluid dynamics (CFD) was employed to simulate the pipe flow of 18 self-consolidating and four highly workable concrete mixtures in a 30-m long pumping circuit. Pressure loss (ΔP) in 100- and 125-mm diameter (DP) pipelines was measured under low (1.2–6.2 l/s) and high (8.1–16.4 l/s) flow rates (Q). The numerical simulation was successfully carried out using a two-fluid model and a new variable-viscosity single-fluid approach, namely double-Bingham and tri-viscous models, respectively. The radial variation of rheological properties of the concrete across the pipe section, representing the plug flow, sheared concrete, and lubrication layer (LL) zones was …

Volumetric Lattice Boltzmann Method For Wall Stresses Of Image-Based Pulsatile Flows, Xiaoyu Zhang, Joan Gomez-Paz, Xi Chen, James M. Mcdonough, Md Mahfuzul Islam, Yiannis Andreopoulos, Luoding Zhu, Huidan Yu

Mechanical Engineering Faculty Publications

Image-based computational fluid dynamics (CFD) has become a new capability for determining wall stresses of pulsatile flows. However, a computational platform that directly connects image information to pulsatile wall stresses is lacking. Prevailing methods rely on manual crafting of a hodgepodge of multidisciplinary software packages, which is usually laborious and error-prone. We present a new computational platform, to compute wall stresses in image-based pulsatile flows using the volumetric lattice Boltzmann method (VLBM). The novelty includes: (1) a unique image processing to extract flow domain and local wall normality, (2) a seamless connection between image extraction and VLBM, (3) an en-route …

Small-Pore Zeolite Membranes: A Review Of Gas Separation Applications And Membrane Preparation, Zishu Cao, Ninad Anjikar, Shaowei Yang

Chemical & Biomedical Engineering Faculty Publications

There have been significant advancements in small-pore zeolite membranes in recent years. With pore size closely related to many energy- or environment-related gas molecules, small-pore zeolite membranes have demonstrated great potential for the separation of some interested gas pairs, such as CO2/CH4, CO2/N-2 and N-2/CH4. Small-pore zeolite membranes share some characteristics but also have distinctive differences depending on their framework, structure and zeolite chemistry. Through this mini review, the separation performance of different types of zeolite membranes with respect to interested gas pairs will be compared. We aim to give readers an idea of membrane separation status. A few representative …

Estonian Internet Voting With Anonymous Credentials, İsa Sertkaya, Peter Roenne, Peter Y. A. Ryan

Turkish Journal of Electrical Engineering and Computer Sciences

The Estonian Internet voting (EIV) scheme is a unique example of a long-term nation-wide, legally binding electronic voting deployment. The EIV scheme is used in parallel with standard paper-based election day voting, of course invalidating an already cast i-vote. This necessarily requires careful authentication of the eligible voters and makes the Estonian identity card solution a crucial part of the scheme, however, note that Parsovs has recently drawn attention to the security flaws found in Estonian ID-cards. In this study, we propose an e-voting scheme EIV-AC that integrates the EIV scheme with anonymous credentials based on self-sovereign identity. In addition …

Block Size Optimization For Pow Consensus Algorithm Based Blockchainapplications By Using Whale Optimization Algorithm, Betül Aygün, Hi̇lal Arslan

Turkish Journal of Electrical Engineering and Computer Sciences

Blockchain-based applications come up with cryptocurrencies, especially Bitcoin, introducing a distributed ledger technologies for peer-to-peer networks and essentially records the transactions in blocks containing hash value of the previous blocks. Block generation constitutes the basis of this technology, and the optimization of such systems is among the most crucial concerns. Determining either the block size or the number of transactions in the block brings out a remarkable problem that has been solved by the miners in recent years. First, higher block size results in higher transaction time, on the other hand, smaller block size has many disadvantages such as security, …

A Statistical Mimo Channel Model For Reconfigurable Intelligent Surface Assisted Wireless Communications, Baiping Xiong, Zaichen Zhang, Hao Jiang, Hongming Zhang, Jiangfan Zhang, Liang Wu, Jian Dang

Electrical and Computer Engineering Faculty Research & Creative Works

Reconfigurable intelligent surface (RIS) consisting of a large number of programmable near-passive units has been a hot topic in wireless communications due to its capability in providing smart radio environments to enhance the communication performance. However, the existing research are mainly based on simplistic channel models, which will, in principle, lead to inaccurate analysis of the system performance. In this paper, we propose a general three-dimensional (3D) wideband non-stationary end-to-end channel model for RIS assisted multiple-input multiple-output (MIMO) communications, which takes into account the physical properties of RIS, such as unit numbers, unit sizes, array orientations and array configurations. By …

Prepreg And Core Dielectric Permittivity (Εr) Extraction For Fabricated Striplines' Far-End Crosstalk Modeling, Shaohui Yong, Srinath Penugonda, Donghyun Kim, Victor Khilkevich, Bo Pu, Xiaoning Ye, Qian Gao, Xiao Ding Cai, Bidyut Sen, Jun Fan

Electrical and Computer Engineering Faculty Research & Creative Works

As the data rate and density of digital high-speed systems are getting higher, far-end crosstalk (FEXT) noise becomes one of the major issues that limit signal integrity performance. It was commonly believed that FEXT would be eliminated for strip lines routed in a homogeneous dielectric, but in reality, FEXT can always be measured in strip lines on the fabricated printed circuit boards. A slightly different dielectric permittivity (ϵr) of prepreg and core may be one of the major contributors to the FEXT. This article is focusing on providing a practical FEXT modeling methodology for strip lines by introducing an approach …

Comprehensive Evaluation Of A High-Temperature Resistant Re-Crosslinkable Preformed Particle Gel For Water Management, Bowen Yu, Shuda Zhao, Yifu Long, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Gel treatment has been widely applied to control conformance for improving oil recovery and control water production in mature oil fields. However, most of the hydrogel systems are limited when being applied in the harsh environments of high temperatures. A systematic evaluation was conducted in this study to evaluate a modified PPG product, the high temperature resistant re-crosslinkable preformed particle gel (HT-RPPG) which can re-crosslink to form a bulky material and keep thermostable in the large-opening features after placement. This material was developed to overcome the limitations of conventional PPGs in the reservoirs with large- opening features such as open …

A Survey Of Blind Modulation Classification Techniques For Ofdm Signals, Anand Kumar, Sudhan Majhi, Guan Gui, Hsiao-Chun Wu, Chau Yuen

Faculty Publications

Blind modulation classification (MC) is an integral part of designing an adaptive or intelligent transceiver for future wireless communications. Blind MC has several applications in the adaptive and automated systems of sixth generation (6G) communications to improve spectral efficiency and power efficiency, and reduce latency. It will become a integral part of intelligent software-defined radios (SDR) for future communication. In this paper, we provide various MC techniques for orthogonal frequency division multiplexing (OFDM) signals in a systematic way. We focus on the most widely used statistical and machine learning (ML) models and emphasize their advantages and limitations. The statistical-based blind …

A Survey Of Blind Modulation Classification Techniques For Ofdm Signals, Anand Kumar, Sudhan Majhi, Guan Gui, Hsiao-Chun Wu, Chau Yuen

Faculty Publications

Blind modulation classification (MC) is an integral part of designing an adaptive or intelligent transceiver for future wireless communications. Blind MC has several applications in the adaptive and automated systems of sixth generation (6G) communications to improve spectral efficiency and power efficiency, and reduce latency. It will become a integral part of intelligent software-defined radios (SDR) for future communication. In this paper, we provide various MC techniques for orthogonal frequency division multiplexing (OFDM) signals in a systematic way. We focus on the most widely used statistical and machine learning (ML) models and emphasize their advantages and limitations. The statistical-based blind …

Characterization, Design, And Optimization Of Dual-Purpose Wind Turbines And Frost Protection Fans, Ethan Narad

Master's Theses

This thesis report outlines the creation of a MATLAB tool to design reversible machines that can function as both wind turbines and as agricultural frost protection fans. Frost protection fans are used to prevent crop loss during radiative freeze events during which a temperature inversion is present. Such a dual-purpose machine fundamentally has the constraint that it must use symmetric airfoils, so a suite of tools for automatically designing an optimized wind turbine blade with symmetric airfoils using the Blade Element Momentum (BEM) theory approach is presented. The BEM code is then re-derived and adapted for use with a frost …

Design And Optimization Of High Temperature Optocouplers As Galvanic Isolation, Abbas Sabbar, Syam Madhusoodhanan, Huong Tran, Binzhong Dong, Jiangbo Wang, H. Alan Mantooth, Shui-Qing Yu, Zhong Chen

Electrical Engineering Faculty Publications and Presentations

The commercial InGaN-based (blue and green) and AlGaInP-based (red) multiple quantum well (MQW) lighting emitting diodes (LEDs) were studied in a wide range of temperatures up to 800 K for their light emission and detection (i.e., LEDs operated under reverse bias as photodiodes (PDs)) characteristics. The results indicate the feasibility of integrating a pair of selected LEDs to fabricate high temperature (HT) optocouplers, which can be utilized as galvanic isolation to replace the bulky isolation transforms in the high-density power modules. A detailed study on LEDs and PDs were performed. The external quantum efficiency (EQE) of the LED and PDs …

Novel Fabrication Of Silver-Coated Copper Nanowires With Organic Compound Solution, Suhyun Lee, Chien Wern, Sung Yi

Mechanical and Materials Engineering Faculty Publications and Presentations

Copper nanowires and Cu-Ag nanowires have various potential applications, such as transparent conductive film, flexible electronics, and conductive filler. In this study, we developed a new green fabrication method for silver-coated copper nanowires using methylsulfonylmethane (DMSO2), which is an environmentally friendly chemical at the food-grade level, to replace toxic chemicals, including ammonia, in the silver coating process. Copper nanowires were synthesized under various reaction temperatures and concentrations of hydrazine (N2H4), ethylenediamine (EDA), sodium hydroxide (NaOH), and copper precursor. The reaction temperature higher than 70 C caused the oxidation of copper products and evaporation of the sample solution. The optimal conditions …

Development Of Guidelines For Collecting Transit Ridership Data, Hong Yang, Kun Xie, Sherif Ishak, Qingyu Ma, Yang Liu

Computational Modeling & Simulation Engineering Faculty Publications

Transit ridership is a critical determinant for many transit applications such as operation optimizations and project prioritization under performance-based funding mechanisms. As a result, the quality of ridership data is of utmost importance to both transit administrative agencies and transit operators. Many transit operators in Virginia report their ridership data to the Department of Rail and Public Transportation (DRPT) and the National Transit Database (NTD). However, with no specific guidelines available to transit agencies in Virginia for collecting ridership data, the heterogeneous mixture of diverse data collection methods and technologies has often raised concerns about the consistency and quality of …

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas–liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …

Tracking The Heavy Metal Contaminants Entrained With The Flow Into A Trickle Bed Hydrotreating Reactor Packed With Different Catalyst Shapes Using Newly Developed Noninvasive Dynamic Radioactive Particle Tracking, Binbin Qi, Omar Farid, Alexandre França Velo, Jihane Mendil, Sebastián Uribe, Yasunobu Kaneko, Kei Sakakura, Yasuhito Kagota, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

A newly developed modified Dynamic Radioactive Particle Tracking system (DRPT) was used to investigate the heavy metal contaminants deposition locations in different catalyst beds, sphere, cylinder, trilobe, and quadrilobed in Trickle Bed Reactors. In the present paper, Kernel Density Estimator (KDE) was used to estimate the probability density distributions of heavy metal contaminants depositions in terms of bed radius height. The result shows that the four cases have similar probability density distribution in terms of radius, while the spherical catalyst has the larger distribution range in terms of bed height. The heavy metal deposition is directly related to the pressure …

Characterizing The Effect Of Adding Boron Nitride Nanotubes On The Mechanical Properties Of Electrospun Polymer Nanocomposite Microfibers Mesh, Ohood Alsmairat, Nael Barakat

Mechanical Engineering Faculty Publications and Presentations

Electrospun fibrous meshes have a variety of applications such as filtration, drug delivery, energy storage, and engineered tissues due to their high surface area to mass ratio. Therefore, understanding the mechanical properties of these continuously evolving meshes is critical to expand and improve their performance. In this study, the effect of adding Boron Nitride Nanotube (BNNT) to Polymethylmethacrylate (PMMA) composite meshes on the mechanical properties of the polymer is studied. Electrospinning is used to fabricate microfiber meshes of PMMA and BNNT-PMMA. The fabricated meshes are tested experimentally with a uniaxial tensile tester. In addition, a theoretical model is introduced to …

Asphaltene Thermodynamic Precipitation During Miscible Nitrogen Gas Injection, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

For many years, miscible gas injection has been the most beneficial enhanced oil recovery method in the oil and gas industry. However, injecting a miscible gas to displace oil often causes the flocculation and deposition of asphaltenes, which subsequently leads to a number of production problems. Nitrogen gas (N2) injection has been used to enhance oil recovery in some oil fields, seeking to improve oil recovery. However, few works have implemented N2 injection and investigated its effect on asphaltene precipitation and deposition. This research investigated the N2 miscible flow mechanism in nanopores and its impact on asphaltene precipitations, which can …

Proppant Transport Using High-Viscosity Friction Reducer Fracture Fluids At High-Temperature Environment, Ghith Biheri, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The stimulation of unconventional reservoirs to improve oil productivity in tight formations of shale basins is a key objective in hydraulic fracturing treatments. Such stimulation can be made by reliable fracture fluids that have a high viscosity and elasticity to suspend the proppant in the fracture networks. Recently, due to several operational and economic reasons, the oil industry began using highviscosity friction reducers (HVFRs) as direct replacements for linear and crosslinked gels. However, some issues can limit the capability of HVFRs to provide effective sand transport, including the high fluid temperature during fracture treatment inside the formations. This may lead …

Impact Of Clay Stabilizer On The Methane Desorption Kinetics And Isotherms Of Longmaxi Shale, China, Zhong Hua Liu, Jia Chun Wang, Baojun Bai, Yan Ling Wang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Knowing methane desorption characteristics is essential to define the contribution of adsorbed gas to gas well production. To evaluate the synthetic effect of a clay stabilizer solution on methane desorption kinetics and isotherms pertaining to Longmaxi shale, an experimental setup was designed based on the volumetric method. The objective was to conduct experiments on methane adsorption and desorption kinetics and isotherms before and after clay stabilizer treatments. The experimental data were a good fit for both the intraparticle diffusion model and the Freundlich isotherm model. We analyzed the effect of the clay stabilizer on desorption kinetics and isotherms. Results show …

Developing Mix Proportions For Class C Fly Ash-Based Alkali-Activated 3d-Printed Concrete Mixtures, Fareh Abudawaba, Eslam Gomaa, Ahmed Gheni, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study investigated the use of class C fly ash (FA) as a precursor for alkali-activated mortar (AAM) for 3D-printed concrete (3DPC). AAMs with different water-to-FA (W/FA), alkaline activator-to-FA (Alk/FA), and sodium silicate-to-sodium hydroxide (SS/SH) ratios were examined to develop mixtures that can be tailored for different structural applications of 3DPC. The fresh properties, including extrudability and buildability, were evaluated through the open time (OT) and immediate deformation tests, respectively. Different cycle times (CTs) were applied to achieve a strain limit state necessary to maintain the printed shape. The strength of AAMs in different directions at different CTs was examined. …

Viscosity Modifying Agents: Key Components Of Advanced Cement-Based Materials With Adapted Rheology, Hela Bessaies-Bey, Kamal Khayat, Marta Palacios, Wolfram Schmidt, Nicolas Roussel

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Viscosity modifying agents (VMAs) are essential ingredients for the production of flowable cement-based materials. This paper presents an overview of commonly used VMAs and attempts to shed some light on the underlying physics at the origin of their mechanisms of action. The main molecular parameters of VMA controlling the rheological properties of the cement pore solution are highlighted. As the mechanisms of action of VMAs in cement-based materials are closely related to their affinity with the surface of cement particles, the adsorption of the main VMA types is discussed. The effect of VMAs on flow properties and stability of cement-based …

Management Of Change Orders In Infrastructure Transportation Projects, Rayan H. Assaad, Muaz O. Ahmed, Islam H. El-Adaway, Pramen P. Shrestha

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Illinois Department of Transportation (IDOT) will handle many upcoming projects due to the recent statewide infrastructure strategic plan and the fast-track efforts affecting many infrastructure projects amid COVID-19. Nevertheless, many change orders are anticipated to occur on IDOT's projects. Thus, this paper examines the proper contractual management of changes within IDOT infrastructure transportation projects by following a research method based on the integration between a desktop analysis and a focus group analysis. The desktop analysis involved collecting information and data from existing resources, case studies, and documents related to change orders. The focus group analysis involved consulting with change …

Nodule Formation On Copper Electrodeposits In The Rotating Cylinder Hull Cell, Joseph Bauer, Michael S. Moats

Materials Science and Engineering Faculty Research & Creative Works

Nodulation formation during the electrolytic production of high-purity copper can lead to impurity entrapment and/or increased energy consumption. The rotating cylinder Hull cell (RCHC) was used to study copper nodule formation under mass transport conditions similar to industrial electrolytic copper production. The main advantage of the RCHC is that a wide range of current densities can be produced in a single experiment with well-defined mass transfer conditions. Visible nodule formation was observed at current densities greater than 250 A/m2, which is an iavg/iL ratio of 0.30 for a simulated conventional electrowinning cell. Statistical analysis was also performed using the Weibull …

Neural Control Of Stopping And Stabilizing The Arm, Shanie A. L. Jayasinghe, Robert A. Scheidt, Robert L. Sainburg

Biomedical Engineering Faculty Research and Publications

Stopping is a crucial yet under-studied action for planning and producing meaningful and efficient movements. In this review, we discuss classical human psychophysics studies as well as those using engineered systems that aim to develop models of motor control of the upper limb. We present evidence for a hybrid model of motor control, which has an evolutionary advantage due to division of labor between cerebral hemispheres. Stopping is a fundamental aspect of movement that deserves more attention in research than it currently receives. Such research may provide a basis for understanding arm stabilization deficits that can occur following central nervous …

Assessment Of Protection Offered By The Nrf2 Pathway Against Hyperoxia-Induced Acute Lung Injury In Nrf2 Knockout Rats, Said H. Audi, Elizabeth R. Jacobs, Taheri Pardis, Swetha Ganesh, Anne V. Clough

Biomedical Engineering Faculty Research and Publications

Nuclear factor erythroid 2-related factor (Nrf2) is a redox-sensitive transcription factor that responds to oxidative stress by activating expressions of key antioxidant and cytoprotective enzymes via the Nrf2-antioxidant response element (ARE) signaling pathway. Our objective was to characterize hyperoxia-induced acute lung injury (HALI) in Nrf2 knock-out (KO) rats to elucidate the role of this pathway in HALI. Adult Nrf2 wildtype (WT), and KO rats were exposed to room air (normoxia) or >95% O₂ (hyperoxia) for 48 h, after which selected injury and functional endpoints were measured in vivo and ex vivo. Results demonstrate that the Nrf2-ARE signaling pathway …