Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 39091 - 39120 of 196125

Full-Text Articles in Engineering

Underactuated Attitude Control Of A Cubesat Using Cold Gas Thrusters And Nonlinear Control Methods, Adam S. Cottrell Mar 2022

Underactuated Attitude Control Of A Cubesat Using Cold Gas Thrusters And Nonlinear Control Methods, Adam S. Cottrell

Theses and Dissertations

Impulsive thrusters on small satellites, such as CubeSats, are typically used for attitude control. However, to become more agile, small CubeSats must also look to propulsion systems utilizing impulsive thrusters, such as cold-gas, for translational maneuvers. The combined thrust vector is often misaligned with the system's center of mass resulting in a disturbance torque. This must be counteracted by either an attitude determination and control system (ADCS), additional thrusters, or a control method to keep the satellite's attitude at or near equilibrium. Nonlinearities generated by the impulsive maneuvers are overcome via control techniques explored in this research to include on-off …

Go to article

Satellite Tt&C For Cubesats With Applications For Grissom-1, Michael J. Bittle Mar 2022

Satellite Tt&C For Cubesats With Applications For Grissom-1, Michael J. Bittle

Theses and Dissertations

This thesis describes the assessment and analysis performed to characterize the communication subsystem used for command and telemetry transmission in support of the Grissom-1 Mission (GM1). The GM1 is unique in that it represents the pathfinder for a standardized 6U bus that serves as the basis for future CubeSat missions to host a variety of technical and scientific payloads, as prioritized by the Department of Defense, requiring flight demonstration or access to the orbital environment. Lab-based testing within an anechoic chamber provided link margin data required to characterize the command and telemetry links of the GM1. Experimental data describing the …

Go to article

Design Of An Electro-Thermal Nanosatellite Propulsion System, James H. Founds Mar 2022

Design Of An Electro-Thermal Nanosatellite Propulsion System, James H. Founds

Theses and Dissertations

This research focused on designing an arcjet system with water as the propellant. Previous research developed a compact, reliable, and safe propellant storage and feed system. The goal is to combine the arcjet with the previous tank to achieve thrust and specific impulse characteristics greater than cold gas or resistojet system. This platform features a 1 U, non-hazardous, and sub-kilowatt powered propulsion system for nanosatellites. A simplified analysis of the design predicts thrust and specific impulse greater than can be achieved by cold gas or resistojet thrusters. Testing resulted in oxidation of the electrodes raising concerns about the longevity of …

Go to article

Leveraging Xgeo Orbits For Cislunar Space Domain Awareness, Jay Laone Mar 2022

Leveraging Xgeo Orbits For Cislunar Space Domain Awareness, Jay Laone

Theses and Dissertations

With recent interest in using cislunar orbits for a variety of missions, it is more important than ever to also have cislunar space domain awareness. This thesis aims to bridge the gap between traditional LEO/GEO architectures and the new cislunar orbit architectures with orbits higher than GEO but still within the Earth sphere of influence, called xGEO. This research effort first explores the feasibility of xGEO orbits by examining the errors that the two-body assumption builds over time. Findings suggest that the two body assumption can be used to varying degrees depending on the orbit radius. This study has found …

Go to article

Effects Of A Nitrogen And Hydrogen Build Atmosphere On The Properties Of Additively Manufactured Tungsten, Dana C. Madsen Mar 2022

Effects Of A Nitrogen And Hydrogen Build Atmosphere On The Properties Of Additively Manufactured Tungsten, Dana C. Madsen

Theses and Dissertations

Additively manufactured tungsten was printed in pure nitrogen, nitrogen-2.5% hydrogen, and nitrogen-5% hydrogen atmospheres as part of a 2^3 full factorial designed experiment and subjected to room temperature and high-temperature three-point-bend testing, chemical analysis, hardness testing, and microstructural imaging techniques. The pure nitrogen specimens exhibited the highest strength and ductility at both high temperature and room temperature. Chemical analysis showed a 2-8x reduction in compositional oxygen relative to unprocessed powder. Hardness values for all samples was between 306.8 and 361.5 HV1. It is proposed that adding hydrogen into the build atmosphere reduced the available energy density for tungsten melting by …

Go to article

Development Of Minimum Delta-V Trajectories To Service Geo Assets From Cislunar Space, Alexander C. Urban Mar 2022

Development Of Minimum Delta-V Trajectories To Service Geo Assets From Cislunar Space, Alexander C. Urban

Theses and Dissertations

Orbits around Earth are becoming increasingly congested and contested, posing potential future threats to space assets. Cislunar space may offer an effective solution to these problems by offering storage for servicing and replacement vehicles. This investigation explores how to minimize the dV costs required of a network of service vehicles traveling from cislunar space to GEO using in-situ resource utilization. In this investigation the arc costs of an event-driven generalized multicommodity network flow are generated for creation of a model to be used to develop a dynamic scheduler. High-thrust trajectories between various inclinations of GEO, an Earth-Moon L1 Lyapunov orbit …

Go to article

Thermal Relaxation Of Shot Peen Induced Residual Stresses In A Nickel-Base Superalloy, Bryce E. Van Velson Mar 2022

Thermal Relaxation Of Shot Peen Induced Residual Stresses In A Nickel-Base Superalloy, Bryce E. Van Velson

Theses and Dissertations

Shot peening induces compressive residual stresses in components that positively influence fatigue life. Thermal and mechanical loading causes those residual stresses to relax. The hole drilling method and xray diffraction is used to measure the thermal relaxation of residual stresses in the nickel-base superalloy ME3.

Go to article

Synthetic Aperture Sillouette Imaging For Space Domain Awareness, Lester L. Tuck Iv Mar 2022

Synthetic Aperture Sillouette Imaging For Space Domain Awareness, Lester L. Tuck Iv

Theses and Dissertations

A gap exists in imaging capabilities necessary for Space Domain Awareness, at Geostationary Equatorial Orbit (GEO) distances and beyond. Synthetic Aperture Silhouette Imaging (SASI), which resolves a space object's silhouette with measurements of the diffraction pattern cast by the object's occultation of a distant star, provides a new method that may be used to characterize these satellites. This research analyzes the reconstruction of satellite silhouettes using data from a scaled benchtop experiment to evaluate the distance and resolution limitations of SASI at distances equal to and beyond GEO. Diffraction patterns of two satellite silhouette targets are captured at various scaled …

Go to article

Characterizing Wake Roll-Up And Vortex Structure For Delta Wing Configuations Featuring Flow Control Devices At Low Reynolds Number, Jeffrey M. Layng Mar 2022

Characterizing Wake Roll-Up And Vortex Structure For Delta Wing Configuations Featuring Flow Control Devices At Low Reynolds Number, Jeffrey M. Layng

Theses and Dissertations

Various configurations of a cropped delta wing featuring a NACA 0012 wing-section were evaluated experimentally at a Reynolds number of 5.0 x 105 in the Air Force Institute of Technology Low-Speed Wind Tunnel facility. The effects of active flow control (AFC) and passive boundary-layer fences (BLF) were shown to improve high angle of attack delta wing performance. The AFC BLFs were shown to replicate the performance enhancements found in passive BLFs without incurring a drag penalty. An experimental characterization of the wake region is presented to compare the wake roll-up and leading edge vortices for these baseline, passive BLF, …

Go to article

Analyzing The Impact Of Blood Transfusion Kits And Triage Misclassification Errors For Military Medical Evacuation Dispatching Policies Via Approximate Dynamic Programming, Channel A. Rodriguez Mar 2022

Analyzing The Impact Of Blood Transfusion Kits And Triage Misclassification Errors For Military Medical Evacuation Dispatching Policies Via Approximate Dynamic Programming, Channel A. Rodriguez

Theses and Dissertations

Members of the armed forces greatly rely on having an effective and efficient medical evacuation (MEDEVAC) process for evacuating casualties from the battlefield to medical treatment facilities (MTF) during combat operations. This thesis examines the MEDEVAC dispatching problem and seeks to determine an optimal policy for dispatching a MEDEVAC unit, if any, when a 9-line MEDEVAC request arrives, taking into account triage classification errors and the possibility of having blood transfusion kits on board select MEDEVAC units. A discounted, infinite-horizon continuous-time Markov decision process (MDP) model is formulated to examine such problem and compare generated dispatching policies to the myopic …

Go to article

Coupled Orbit-Attitude Dynamics And Control Of A Cubesat Equipped With A Robotic Manipulator, Charles M. Carr Mar 2022

Coupled Orbit-Attitude Dynamics And Control Of A Cubesat Equipped With A Robotic Manipulator, Charles M. Carr

Theses and Dissertations

This research investigates the utility and expected performance of a robotic servicing CubeSat. The coupled orbit-attitude dynamics of a 6U CubeSat equipped with a four-link serial manipulator are derived. A proportional-integral-derivative controller is implemented to guide the robot through a series of orbital scenarios, including rendezvous and docking following ejection from a chief spacecraft, repositioning the end effector to a desired location, and tracing a desired path with the end effector. Various techniques involving path planning and inverse differential kinematics are leveraged. Simulation results are presented and performance metrics such as settling time, state errors, control use, and system robustness …

Go to article

Differential Game-Based Defensive Architecture Study Employing Ground-Based Interceptors, Stephen T. Zittrouer Mar 2022

Differential Game-Based Defensive Architecture Study Employing Ground-Based Interceptors, Stephen T. Zittrouer

Theses and Dissertations

A study of defensive architectures for combating hypersonic glide vehicles (HGVs) via interception with a ground-based interceptor (GBI) is presented. Pursuit-evasion differential games are formulated for numerical simulation of the interception engagements. A one-sided optimal control problem wherein the evader HGV is optimized and the pursuer GBI employs a suboptimal proportional navigation control strategy is solved. The solution space is characterized by varying the pursuer initial velocity advantage relative to the evader. A two-sided optimal control problem in which both players behave optimally is solved via the semi-direct collocation with nonlinear programming (semiDCNLP) method. The resulting state and control trajectories …

Go to article

Aeroelasticity Of Six Degree-Of-Freedom Satellite Bus Configurations During Terminal Reentry, Jinhee F. Byun Mar 2022

Aeroelasticity Of Six Degree-Of-Freedom Satellite Bus Configurations During Terminal Reentry, Jinhee F. Byun

Theses and Dissertations

With disposable equipment on board, the emphasis on structural strength and robust thermal protection system (TPS) pales for a conventional satellite in comparison to reentry capsules, which are specifically designed to withstand the intense aerothermodynamic effects experienced during reentry. In this research, six degree-of-freedom (6DOF) analyses of three distinct non-aerodynamic satellite bus configurations were performed with emphasis on the investigation of their terminal reentry characteristics, and thermal and deceleration loading on the satellite body. Aeroelastic effects on their respective solar panel structures were also analyzed focusing on characterizing bending stress at their attachment/deployment mechanism. It was found that the Terra …

Go to article

A Proposed Mission Assurance Framework For University Cubesat Programs, Mitchell R. Thomas Mar 2022

A Proposed Mission Assurance Framework For University Cubesat Programs, Mitchell R. Thomas

Theses and Dissertations

The low cost, small form factor, and use of Commercial-Off-The-Shelf components make CubeSats an ideal platform for university use given their unique constraints. Since 2000, roughly 55% of CubeSats developed by universities fail to meet mission goals. Mission assurance, which is used to increase confidence in mission success, is based around traditional government programs, and does not provide an adequate road map for universities. Leaving them without specific guidance in tailoring mission assurance activities to operate within their constraints. This paper adapts these traditional practices to develop a baseline mission assurance framework for university CubeSat programs.

Go to article

Considerations Using Iterative Closest Point In Presence Of Occlusions In Automated Aerial Refueling, Joel M. Miller Mar 2022

Considerations Using Iterative Closest Point In Presence Of Occlusions In Automated Aerial Refueling, Joel M. Miller

Theses and Dissertations

The United States Air Force is researching vision-based AAR and different methods for this actualization. Previous work has established a computer vision based pipeline with ICP. This work focuses on how ICP can become resilient to boom occlusion by minimizing errors and discusses the limitations of ICP in the face of occlusions. Specifically, we look at various filtering techniques to remove non-salient points. To register point clouds while maintaining real time interactivity, this work also presents a method for downsampling high resolution camera calibrations to preserve real-time processing and significantly decrease the vision pipeline latency.

Go to article

Monocular Pose Estimation For Automated Aerial Refueling Via Perspective-N-Point, James C. Lynch Mar 2022

Monocular Pose Estimation For Automated Aerial Refueling Via Perspective-N-Point, James C. Lynch

Theses and Dissertations

Any Automated Aerial Refueling (AAR) solution requires the quick and precise estimation of the relative position and rotation of the two aircraft involved. This is currently accomplished using stereo vision techniques augmented by Iterative Closest Point (ICP), but requires post-processing to account for environmental factors such as boom occlusion. This paper proposes a monocular solution, combining a custom-trained single-shot object detection Convolutional Neural Network (CNN) and Perspective-n-Point (PnP) estimation to calculate a pose estimate with a single image. This solution is capable of pose estimation at contact point (22m) within 7cm of error and a rate of 10Hz, regardless of …

Go to article

Towards The Integration Of Ferroelectric Negative Capacitance With Gallium Oxide Semiconductors For High Power Applications, Guillermo A. Salcedo Mar 2022

Towards The Integration Of Ferroelectric Negative Capacitance With Gallium Oxide Semiconductors For High Power Applications, Guillermo A. Salcedo

Theses and Dissertations

Gallium oxide is a relatively new semiconductor material with characteristics auspicious for high frequency and high-voltage applications. Although several research groups have already demonstrated radio-frequency (RF) devices on Ga2O3 with remarkable features, there is still room for improvement. For instance, the operating frequency of RF field-effect transistors (FET) decreases with the parasitic capacitance, which can be counteracted by higher gate capacitance. Implementing ferroelectric dielectrics with suitable parameters in Ga2O3 FET promises to enhance the gate capacitance and therefore increase operating frequency. This work investigated the effect of various factors (film composition, film thickness, TiN …

Go to article

Multisector Dynamics: Advancing The Science Of Complex Adaptive Human-Earth Systems, Patrick M. Reed, Antonia Hadjimichael, Richard H. Moss, Christa Brelsford, Casey D. Burleyson, Stuart Cohen, Ana Dyreson, David F. Gold, Rohini S. Gupta, Klaus Keller, Megan Konar, Erwan Monier Mar 2022

Multisector Dynamics: Advancing The Science Of Complex Adaptive Human-Earth Systems, Patrick M. Reed, Antonia Hadjimichael, Richard H. Moss, Christa Brelsford, Casey D. Burleyson, Stuart Cohen, Ana Dyreson, David F. Gold, Rohini S. Gupta, Klaus Keller, Megan Konar, Erwan Monier

Michigan Tech Publications, Part 1

The field of MultiSector Dynamics (MSD) explores the dynamics and co-evolutionary pathways of human and Earth systems with a focus on critical goods, services, and amenities delivered to people through interdependent sectors. This commentary lays out core definitions and concepts, identifies MSD science questions in the context of the current state of knowledge, and describes ongoing activities to expand capacities for open science, leverage revolutions in data and computing, and grow and diversify the MSD workforce. Central to our vision is the ambition of advancing the next generation of complex adaptive human-Earth systems science to better address interconnected risks, increase …

Go to article

Investigation Of Mechanical Properties Of Parts Fabricated With Gas- And Water-Atomized 304l Stainless Steel Powder In The Laser Powder Bed Fusion Process, M. Hossein Sehhat, Austin T. Sutton, Chia Hung Hung, Joseph William Newkirk, Ming-Chuan Leu Mar 2022

Investigation Of Mechanical Properties Of Parts Fabricated With Gas- And Water-Atomized 304l Stainless Steel Powder In The Laser Powder Bed Fusion Process, M. Hossein Sehhat, Austin T. Sutton, Chia Hung Hung, Joseph William Newkirk, Ming-Chuan Leu

Materials Science and Engineering Faculty Research & Creative Works

The use of gas-atomized powder as the feedstock material for the laser powder bed fusion (LPBF) process is common in the additive manufacturing (AM) community. Although gas-atomization produces powder with high sphericity, its relatively expensive production cost is a downside for application in AM processes. Water atomization of powder may overcome this limitation due to its low-cost relative to the gas-atomization process. In this work, gas- and water-atomized 304L stainless steel powders were morphologically characterized through scanning electron microscopy (SEM). The water-atomized powder had a wider particle size distribution and exhibited less sphericity. Measuring powder flowability using the Revolution Powder …

Go to article

Water Chemistry, Exposure Routes, And Metal Forms Determine The Bioaccumulation Dynamics Of Silver (Ionic And Nanoparticulate) In Daphnia Magna, Emma Lesser, Fatima Noor Sheikh, Mithun Sikder, Marie Noële Croteau, Natasha Franklin, Mohammed Baalousha, Niveen S. Ismail Mar 2022

Water Chemistry, Exposure Routes, And Metal Forms Determine The Bioaccumulation Dynamics Of Silver (Ionic And Nanoparticulate) In Daphnia Magna, Emma Lesser, Fatima Noor Sheikh, Mithun Sikder, Marie Noële Croteau, Natasha Franklin, Mohammed Baalousha, Niveen S. Ismail

Engineering: Faculty Publications

Treatment wetlands utilize various physical and biological processes to reduce levels of organic contaminants, metals, bacteria, and suspended solids. Silver nanoparticles (AgNPs) are one type of contaminant that can enter treatment wetlands and impact the overall treatment efficacy. Grazing by filter-feeding zooplankton, such as Daphnia magna, is critical to treatment wetland functioning; but the effects of AgNPs on zooplankton are not fully understood, especially at environmentally relevant concentrations. We characterized the bioaccumulation kinetics of dissolved and nanoparticulate (citrate-coated) 109Ag in D. magna exposed to environmentally relevant 109Ag concentrations (i.e., 0.2–23 nmol L−1 Ag) using a stable isotope as a tracer …

Go to article

Delaunay Walk For Fast Nearest Neighbor: Accelerating Correspondence Matching For Icp, James D. Anderson, Ryan M. Raettig, Josh Larson, Scott L. Nykl, Clark N. Taylor, Thomas Wischgoll Mar 2022

Delaunay Walk For Fast Nearest Neighbor: Accelerating Correspondence Matching For Icp, James D. Anderson, Ryan M. Raettig, Josh Larson, Scott L. Nykl, Clark N. Taylor, Thomas Wischgoll

Computer Science and Engineering Faculty Publications

Point set registration algorithms such as Iterative Closest Point (ICP) are commonly utilized in time-constrained environments like robotics. Finding the nearest neighbor of a point in a reference 3D point set is a common operation in ICP and frequently consumes at least 90% of the computation time. We introduce a novel approach to performing the distance-based nearest neighbor step based on Delaunay triangulation. This greedy algorithm finds the nearest neighbor of a query point by traversing the edges of the Delaunay triangulation created from a reference 3D point set. Our work integrates the Delaunay traversal into the correspondences search of …

Go to article

Solving The Negative Earnings Dilemma Of Multistage Bidding In Public Construction And Infrastructure Projects: A Game Theory-Based Approach, Muaz O. Ahmed, Islam H. El-Adaway, Kalyn T. Coatney Mar 2022

Solving The Negative Earnings Dilemma Of Multistage Bidding In Public Construction And Infrastructure Projects: A Game Theory-Based Approach, Muaz O. Ahmed, Islam H. El-Adaway, Kalyn T. Coatney

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

With the tremendous increase in spending on public projects, contractors need to employ efficient and effective bidding strategies to cope with the competitive bidding environment. Usually, general contractors carry a portion of the work and subcontract other parts to eventually submit a holistic joint bid. This bidding setting is referred to as multistage bidding where subcontractors submit their quotations/bids to the general contractor, after which the general contractor submits a final joint bid for the whole project. In a multistage bidding environment, general contractors may be faced with an increase in the probability of negative or below normal profits. Despite …

Go to article

Field Retrofit And Testing Of A Corroded Metal Culvert Using Gfrp, Mahmoud Reda Taha, Susan Bogus, Mohammed Abdellatef, Daniel Heras Murcia Mar 2022

Field Retrofit And Testing Of A Corroded Metal Culvert Using Gfrp, Mahmoud Reda Taha, Susan Bogus, Mohammed Abdellatef, Daniel Heras Murcia

Data

One of the current pressing problem for all DOTs is the corrosion-oriented deterioration of the existing metal culverts. These metal culverts typically are designed for a life of 50 years. However, corrosion is making them last no longer than 30years. Here we propose use of Glass Fiber Reinforced Polymers (GFRP) pipe section as a fit-in GFRP profile liner for complete repair and rehabilitation of the corroded metal culvert with an expected life of 75 years. This is mainly because of the corrosion free nature of the GFRP material. In the current study, the design method for using glass fiber-reinforced polymer …

Go to article

Increasing Versatility And Recyclability Of Additive Manufacturing By Utilizing Epdm/Pp Thermoplastic Vulcanizates, Nathan Zeringue Mar 2022

Increasing Versatility And Recyclability Of Additive Manufacturing By Utilizing Epdm/Pp Thermoplastic Vulcanizates, Nathan Zeringue

Honors Capstones

No abstract provided.

Go to article

90snet:, Seth Richard Mar 2022

90snet:, Seth Richard

Honors Capstones

No abstract provided.

Go to article

Bone And Cartilage Compression Simulator, Karoline M. Wucherer, Benjamin A. Parmentier, Thomasina E. Hinkle Mar 2022

Bone And Cartilage Compression Simulator, Karoline M. Wucherer, Benjamin A. Parmentier, Thomasina E. Hinkle

Biomedical Engineering

A device was developed that delivers mechanical loads to bone and soft tissue samples under physiological conditions to aid in the research of tissue engineering bone and cartilage. To begin the design process, a Network Diagram and Gantt Chart were produced to create a general timeline for the project to follow. This allowed us to measure our progress and determine what effects (if any) delays could have on our project.

Go to article

Molecular Simulation Of Steady-State Evaporation And Condensation Of Water In Air, Eric Bird, Jesus Gutierrez Plascencia, Pawel Keblinski, Zhi Liang Mar 2022

Molecular Simulation Of Steady-State Evaporation And Condensation Of Water In Air, Eric Bird, Jesus Gutierrez Plascencia, Pawel Keblinski, Zhi Liang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

It Was Shown in Recent Experiments and Molecular Dynamics (MD) Simulations that Schrage Equation Predicts Evaporation and Condensation Rates of Water in the Absence of a Non-Condensable Gas with Good Accuracy. However, It is Not Clear Whether Schrage Equation is Still Accurate or Even Valid for Quantifying Water Evaporation and Condensation Rates in Air. in This Work, We Carry Out MD Simulations to Study Steady-State Evaporation and Condensation of Water at a Planar Water-Air Interface. the Simulation Results Show that the Evaporation and Condensation Fluxes of Water in the Presence of Air Are Still in a Good Agreement with the …

Go to article

Understanding Effects Of Permafrost Degradation And Coastal Erosion On Civil Infrastructure In Arctic Coastal Villages: A Community Survey And Knowledge Co-Production, Min Liew, Ming Xiao, Louise Farquharson, Dmitry Nicolsky, Anne Jensen, Vladimir Romanovsky, Jana Peirce, Lilian Alessa, Christopher Mccomb, Xiong Zhang, Benjamin Jones Mar 2022

Understanding Effects Of Permafrost Degradation And Coastal Erosion On Civil Infrastructure In Arctic Coastal Villages: A Community Survey And Knowledge Co-Production, Min Liew, Ming Xiao, Louise Farquharson, Dmitry Nicolsky, Anne Jensen, Vladimir Romanovsky, Jana Peirce, Lilian Alessa, Christopher Mccomb, Xiong Zhang, Benjamin Jones

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This paper presents the results of a community survey that was designed to better under-stand the effects of permafrost degradation and coastal erosion on civil infrastructure. Observations were collected from residents in four Arctic coastal communities: Point Lay, Wainwright, Utqiaġvik, and Kaktovik. All four communities are underlain by continuous ice-rich permafrost with varying degrees of degradation and coastal erosion. The types, locations, and periods of observed permafrost thaw and coastal erosion were elicited. Survey participants also reported the types of civil infrastructure being affected by permafrost degradation and coastal erosion and any damage to residential buildings. Most survey participants reported …

Go to article

Microwave Hyperthermia Application With Bioimplant Single Slot Coaxial Antennadesign For Mouse Breast Cancer Treatment, Ahmet Ri̇fat Görgün, Cem Baytöre, Selçuk Çömlekçi̇, Mehmet İbrahi̇m Tuğlu, Adnan Kaya Mar 2022

Microwave Hyperthermia Application With Bioimplant Single Slot Coaxial Antennadesign For Mouse Breast Cancer Treatment, Ahmet Ri̇fat Görgün, Cem Baytöre, Selçuk Çömlekçi̇, Mehmet İbrahi̇m Tuğlu, Adnan Kaya

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a novel animal model for the breast cancer treatment which contains hyperthermia is proposed. For this main purpose a low cost, interstitial, bioimplant antenna by short ended single slot design is proposed to heat the cancerous tissues. Both the theoretical background of the proposed system and the simulation and measurement results of antenna design are presented. An artificial tissue phantom model has been created under laboratory conditions and then the utility of the proposed antenna has been tested on this model. Artificial tissues have been heated by 25W to (41-44 ? C) in a short time like …

Go to article

Performance Analysis And Feature Selection For Network-Based Intrusion Detectionwith Deep Learning, Serhat Caner, Nesli̇ Erdoğmuş, Yusuf Murat Erten Mar 2022

Performance Analysis And Feature Selection For Network-Based Intrusion Detectionwith Deep Learning, Serhat Caner, Nesli̇ Erdoğmuş, Yusuf Murat Erten

Turkish Journal of Electrical Engineering and Computer Sciences

An intrusion detection system is an automated monitoring tool that analyzes network traffic and detects malicious activities by looking out either for known patterns of attacks or for an anomaly. In this study, intrusion detection and classification performances of different deep learning based systems are examined. For this purpose, 24 deep neural networks with four different architectures are trained and evaluated on CICIDS2017 dataset. Furthermore, the best performing model is utilized to inspect raw network traffic features and rank them with respect to their contributions to success rates. By selecting features with respect to their ranks, sets of varying size …

Go to article

First Prev Next Last