Engineering Commons^™

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Comparing Actively Managed Mutual Fund Categories To Index Funds Using Linear Regression Forecasting And Portfolio Optimization, Luke Weiner

Industrial Engineering Undergraduate Honors Theses

The global investment industry offers a wide variety of investment products especially for individual investors. One such product, index funds, which are younger than actively managed mutual funds, have typically outperformed managed funds. Despite this phenomenon, investors have displayed a tendency to continue investing in actively managed funds. Although only a small percentage of actively managed funds outperform index funds, the costs of actively managed funds are significantly higher. Also, managed fund performances are most often determined by their fund category such as growth or real estate. I wanted to answer the following question for individual investors: can we …

Corrosion Assessment Of Biodegradable Metal Implants For Orthopedic Applications, Wendy B. Reynoso-Diaz

Honors Theses

Magnesium alloys are the most promising materials to be used as biodegradable implants mainly due to their superior biocompatibility and lower specific density compared to other biodegradable metals (i.e., zinc and iron-based alloys). This study is investigating the effect of two different manufacturing methods and purity levels on the corrosion rates of a novel Mg-Zn-Ca-Mn-based alloy. Experimental in vitro corrosion tests were conducted on the biocompatible Mg-Zn-Ca-Mn-based alloy fabricated using conventional casting and hot rolling with low and high purity levels. The experimental research conducted, assessed the corrosion rates of the following Mg-1.2Zn-0.5Ca-0.5Mn-based alloys: Hot Rolled High Purity, As-Cast High …

Structural Checking Tool Restructure And Matching Improvements, Derek Taylor

Graduate Theses and Dissertations

With the rising complexity and size of hardware designs, saving development time and cost by employing third-party intellectual property (IP) into various first-party designs has become a necessity. However, using third-party IPs introduces the risk of adding malicious behavior to the design, including hardware Trojans. Different from software Trojan detection, the detection of hardware Trojans in an efficient and cost-effective manner is an ongoing area of study and has significant complexities depending on the development stage where Trojan detection is leveraged. Therefore, this thesis research proposes improvements to various components of the soft IP analysis methodology utilized by the Structural …

Modifications Of A Machine To Produce Clinically-Sized Angioplasty Balloons For Bifurcations, Natalie Smith

Biomedical Engineering Undergraduate Honors Theses

Coronary artery disease is the most common form of heart disease and the leading cause of death in the U.S. ("Heart Disease Facts | cdc.gov", 2021). Typically, coronary artery disease is a result of coronary stenosis, constriction of the coronary artery, which can cause heart failure, arrhythmia, or heart attack ("Coronary Artery Disease: Prevention, Treatment and Research", 2021). Angioplasty balloons are a common treatment method for coronary stenosis and work by placing a stent at the lesion site to widen the vessel and promote blood flow. A type of lesion which remains particularly difficult and relatively common to treat is …

Carbon Fiber Interleaved Polyester Laminate Strength Testing With Correlation In Finite Element Simulations, Hieu Le Huynh

Theses and Dissertations

Delamination of composite structures under impact conditions has been a catastrophic and economic issue in the past and is still a problem today. Many techniques have been used to improve the toughness in composite laminates. An example of a previous dissertation was performed by Adnan Gheryani titled: “Analysis of Polyester Interleafs for Toughness Enhancement in Composite Structures.” Gheryani’s study shows that adding in polyester interleafs into composite laminates made primarily from carbon fiber fabric adds ductility and resists crack growth after delamination, which leads to improvement of the overall toughness of the laminate. However, improvements in toughness, strength, and stiffness …

Efficient And Scalable Algorithms For Estimating Structural Properties Of Large Graphs, Shiju Li

Theses and Dissertations

Large complex networks and graphs are everywhere. Examples include social networks, web graphs, communication networks, power grids, and transportation networks. The ongoing rapid expansion of such networks has triggered a tremendous amount of attention in various disciplines. Estimating the structural and topological properties of the large complex networks has been at the heart of the understanding of the networks. However, such estimations often become technically challenging. This dissertation is focused on how to estimate three non-trivial structural quantities on large networks efficiently and scalably by transcending the current state-of-the-art algorithms. The structural quantities to estimate are (1) a function of …

Complexity Analysis And Parallel Implementation Of The Well Optimized Linear Finder (Wolf) Atmospheric Turbulence Compensation (Atc) Algorithm On Gpu Technology With Comparative Analysis Of Traditional Phase Diverse Atc Methods, Yang Xin

Theses and Dissertations

A new high-speed, high-accuracy general transfer function estimation method for diversitybased problems, known as the Well Optimized Linear Finder Algorithm (WOLF Algorithm), has been developed [1]. Compared to the traditional phase diversity ATC methods, the WOLF Algorithm has less computational complexity and better approximation of the Optical Transfer Function (OTF) and consequently the entrance pupil phases. We compare the time complexity between the traditional Phase Diversity atmospheric turbulence compensation approach and the WOLF Algorithm. The results show that the WOLF Algorithm is dramatically faster than traditional phase diversity methods theoretically. We also implement the time complexity results of the WOLF …

Influence Of Mouthguard Design On Sports Performance And Injury Prevention, Mohammad Ahmed

Theses and Dissertations

Contact sports are associated with some invisible injuries after the incident when symptoms do not appear until weeks after. This can be dangerous as players may continue to engage in the sport and risk further injury. Athletic mouthguards are used to reduce the risk of injury, but there is insufficient data to quantify the effectiveness of mouthguard design on sports performance and injury prevention. In this work, the thickness and material selection of the mouthguard design were characterized in terms of airway resistance, electromyography muscle activation, and energy absorption. First, the effect of thickness on the condyle and temporal bone …

Computer Vision Of Analog Gauges As An Alternative To Digital Flight Test Instrumentation, Michael William James

Theses and Dissertations

Currently, there are a couple of options to gather stick force data from flight test aircraft. Either the aircraft is instrumented with costly piezoelectric force sensors and recorders integrated into the aircraft stick, or the test pilot must use a traditional analog stick force gauge with a pointer and telltale. The conventional stick force gauge works well when the pilot has the mental and physical bandwidth to read and remember, or record, the stick force values throughout the maneuver but does not suffice when in a task saturated, high g force maneuver such as the windup turn. This project proposes …

Preparation, Cure, And Characterization Of Cyanate Ester-Epoxy Blends, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

Cyanate ester resins are often blended with lower cost epoxy monomers in order to modify the cost, toughness, and processing characteristics. There are also several choices of catalysts that can be used to improve processing, namely by reducing the cure temperature. This study was undertaken to illustrate how a designed experiment approach can be used to systematically investigate a wide range of material combinations and illuminate the basic cure behavior of some simple cyanate ester – epoxy blend combinations. Two commercial cyanate ester resin products were obtained. Each was blended with a bisphenol F based epoxy resin at two different …

Grid-Connected Renewable Energy Systems For Residential Hvac Load Management, Oscar Samuel Acosta

Open Access Theses & Dissertations

With an ongoing mission of utility operators to maintain a resilient and reliable power grid in the face of continuously increasing load demand, it is essential that advancements be made in developing both technology and methodology to help account for the increasing energy requirements. According to the U.S. Department of Energy (DOE) and Energy Information Administration (EIA), the residential end-use sector alone counted for 22% of all electricity used in the U.S. in 2020. Of this, approximately 32% of household electricity load is the direct result of air conditioning and space heating units (HVAC). One way to account for this …

Improving Efficiency At El Paso Water Canal Plant, Angel Bustamante

Open Access Theses & Dissertations

AbstractThis project focused on the savings associated with filter backwash and rewash water at the Canal plant. Canal plant is a conventional surface water plant owned and operated by El Paso Water. Approximately 330,000 gallons of backwash water and 84,500 gallons of rewash water are lost daily during normal operational conditions. The combined 414,500 gallons of water are equivalent to 1.27 acre feet per day. During a full eight-month surface water season, this is 305 acre feet. With the goal of optimizing the plant, residuals waste streams can be recycled to the head of the treatment plant. However, there is …

Ultrahigh Strength-High Ductility Combination Low Density Austenitic Steel: Effect Of Aging Temperature And Strain Rate, Jaehyun Kim

Open Access Theses & Dissertations

The objective of the study was to optimize the post-thermal treatment of hot rolled Fe-0.92C-26.3Mn-8.79Al-0.05Nb steel. In this regard, the hardness of the experimental steel was studied as a function of aging time and/or strain rate. The study provided an understanding of aging heat treatment for the experimental steel, which was processed by vacuum induction melting, followed by thermo-mechanical rolling involving multiple passes. The rolled steel was subsequently annealed at 900 °C for 4 h followed by water quenching. X-ray diffraction in scanning mode of 2¸=20-100o indicated the presence of austenite structure. In order to study the influence of aging …

Free Convection Heat Transfer From Plates, Alexa Moreno

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Multiple experiments were performed to assess materials and parameters to be investigated. It was determined that a 0.5” plate has smaller percent error and accommodates for the desired timeframe for a Lab I experiment compared to the first plate used (1.5” thickness). Recommendations for expanding on this project include adding experiments using vertical geometry for heat convection …

Connecting Process Performance And Microbial Community Dynamics During Anaerobic Wastewater Treatment To Improve Microbial Resource Management, Jessica Anne Deaver

All Dissertations

Anaerobic wastewater treatment technologies produce renewable energy and recover resources through microbial conversion of organics. Anaerobic digestion is commonly utilized for municipal wastewater sludge treatment, and co-digestion with other organic-rich substrates like fats, oils, and grease (FOG) can improve methane production. Methane can be captured for combined heat and power production. Microbial electrochemical cells (MXCs) convert organic waste to electrical current to produce electricity or other valuable chemicals. Both these technologies would benefit from understanding the microbial conversion processes more thoroughly. FOG co-digestion sometimes inhibits rather than bolsters methane production. MXCs have potential for blackwater (urine and feces) treatment in …

Sizing Battery Energy Storage And Pv System In An Extreme Fast Charging Station Considering Uncertainties And Battery Degradation, Waqas Ur Rehman, Rui Bo, Hossein Mehdipourpicha, Jonathan W. Kimball

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents mixed integer linear programming (MILP) formulations to obtain optimal sizing for a battery energy storage system (BESS) and solar generation system in an extreme fast charging station (XFCS) to reduce the annualized total cost. The proposed model characterizes a typical year with eight representative scenarios and obtains the optimal energy management for the station and BESS operation to exploit the energy arbitrage for each scenario. Contrasting extant literature, this paper proposes a constant power constant voltage (CPCV) based improved probabilistic approach to model the XFCS charging demand for weekdays and weekends. This paper also accounts for the …

Fate And Transport Of Toxoplasma Gondii Oocysts In Saturated Porous Media: Effects Of Electrolytes And Natural Organic Matter, Christian Pullano

All Theses

Toxoplasma gondii is a pathogenic microorganism that is currently a threat to public health. Understanding the fate and transport of T. gondii through the soil and groundwater is vital in determining the risk it poses to water resources and human health. The physico-chemical interactions between the groundwater and the bio colloid within an aquifer will dictate its mobility and its ability to infect humans. This research examines how various naturally occurring groundwater chemistries containing organic compounds and monovalent and divalent salt solutions will alter the fate and transport of T. gondii. Solutions containing various concentrations of humic acid, fulvic …

Toward Sustainable Urban Food Production: Integrating Hydroponic Cultivation With Wastewater Reuse, Amanda Tan

All Theses

The growing crisis of freshwater scarcity together with the increasing global food demand directs attention to the need for alternative water sources for agriculture. The research presented here engages this need by carrying out indoor cultivation of food crops in Nutrient Film Technique (NFT) hydroponic systems using residential wastewater. Randomized single factor experimental designs were used to investigate the physiochemical and microbiological makeup of the hydroponic nutrient solution throughout the cultivation cycle and their relationship with different plant development parameters.

For agricultural wastewater reuse to be of low risk to human health there must be some advancement in pathogen monitoring …

3d Volumetric Mapping Of Tissue Properties Via A Catheter-Scale Microendoscope Imaging System, Andrew Stark

Biomedical Engineering Undergraduate Honors Theses

The study of tumor microvasculature is an important area of interest for research and clinical communities; however, there are significant limitations in the clinical characterization of the tumor microenvironment. Optical methods offer quantitative real-time measurement of tissue structure and perfusion and can be miniaturized for deployment endoscopically into previously inaccessible locations. However, conventional optical methods (i.e., optical coherence tomography, white light endoscopy, etc.) gives limited information about tissue perfusion while the diameter of various optical probes along with the complexity of scanning mechanisms make it difficult to access certain areas. In this study, a new technique for characterizing the tumor …

Investigating The Impact Of Hypoxia On Reactive Oxygen Species Generation Within Murine Breast Cancer Cells, Jared Mcpeake

Biomedical Engineering Undergraduate Honors Theses

When cancer metastasizes from a primary tumor site to secondary site through the bloodstream or lymph, the cancer becomes more difficult to treat. For this reason, it is vital to study what indicates the metastatic potential of a tumor. Current research has shown that cell lines with high metastatic potential display increased levels of metabolic adaptability over their nonmetastatic counterparts after undergoing hypoxic conditions. One method of assessing this adaptability is to measure the concentration of reactive oxygen species (ROS) produced by the cells while undergoing oxidative stress. In highly adaptable metastatic cells, an increase of ROS buildup within the …

Disparities In Response, Motivations, And Self-Efficacy To Entrepreneurially Minded Learning Within Underrepresented Students' Groups, Kaitlin Hall

Biomedical Engineering Undergraduate Honors Theses

Systemic racism in the United States is embedded within the policies that have created oppression for certain groups. Women, people of color, and those from low-income families have less access to entrepreneurial knowledge due to the education gap. It has been determined that less than 20 percent of US patents entail a female inventor. Black and Hispanic college graduates also lack this access as fewer than half as many individuals hold patents. Ensuring that these populations are educated in inventor knowledge can facilitate greater inclusion. The historical Brown vs the Board of Education intended to end unequal public schooling. It …

Erythrocyte Deformability In Response To Glucose Using Liquid Crystals, Jayden Goff

Biomedical Engineering Undergraduate Honors Theses

The worldwide prevalence of diabetes mellitus is rapidly increasing with about 9.3% of the adult population living with the disease. People with diabetes have trouble regulating their blood glucose levels which typically leads to hyperglycemia. Under normal physiological conditions, erythrocytes can undergo deformations in response to shear stress when passing through capillaries with a smaller diameter. Poorly managed hyperglycemia can lead to the glycosylation of erythrocyte membrane proteins and hemoglobin. This glycosylation leads to increased rigidity of the cells along with decreased deformability in response to mechanical stress; therefore, these cells have a higher susceptibility of getting stuck in the …

Clot Analogs For The Development Of Improved Treatment Methods In Ischemic Stroke, Charles A. Rieth

Biomedical Engineering Undergraduate Honors Theses

According to the CDC, nearly 800,000 individuals experience stroke each year in the United States [1]. Greater than 70% of strokes are of ischemic etiology and involve the occlusion of key arteries in the cardiovascular system [2]. Tissue plasminogen activator (IV-tPA) is the current gold standard for thrombolytic approaches [3]; however, this therapeutic is only effective between 3 and 4.5 hours from the patient’s last know well [4]. As a result, less than 5% of acute ischemic stroke patients receive IV-tPA. In order to increase the viability of AIS treatment as a whole, it is essential that thrombolytic techniques are …

The Influence Of Mmp14 On Angiogenesis In Chemotherapy-Treated Tumors, Abdussaboor Muhammad

Biomedical Engineering Undergraduate Honors Theses

Colorectal cancer is the third most common cancer in the world, and it is the fourth most common cause of cancer related death (1). There have been many significant advancements regarding the treatment of cancer which aim to shrink the size of tumors in patients. However, there is still more that needs to be understood about the many different factors that play a role in colorectal cancer development.

Angiogenesis is the process of forming new blood vessels from existing ones and it requires breaking down and remodeling of the extracellular matrix (ECM) in order to allow endothelial cells to migrate …

Development Of A Novel Sensor For Soil Moisture's Profile, Toan Canh Nguyen

Electrical Engineering Theses - Archive

Monitoring of soil’s water content has been an important part of the irrigation system in farming, regional resources development, rainfall detection as well as disaster prevention. There has been studies and developments in this area over the decades. However, most of the works are focused on sensing the soil as a homogeneous medium, which does not accurately reflect the heterogeneous structure of soil. Works on multi-layer soil sensing have been researched and developed. Though, the current design is complex, not easy to produce and assemble. This work presents a novel low-cost and simple soil sensor design to detect the soil’s …

Nonlinear Optical Microscopy Assessment Of Tissue Structure And Chondrocyte Viability Of Articular Cartilage, Michael Le

All Theses

Articular cartilage functions to protect the ends of bones by providing a surface that can withstand compressive forces and minimize friction during movement. Collagen fibers form the organizational backbone of the extracellular matrix (ECM) in cartilage. Proteoglycans within the ECM function to retain water and provide the tissue with the swelling pressure needed to withstand compressional forces. Chondrocytes, the only type of cell found in articular cartilage, produces these collagen fibers and proteoglycans to maintain the tissue structure and function. Significant injuries to articular cartilage can damage the chondrocytes and disrupt their ability to maintain homeostasis in the tissue. Therefore, …

Atomic Force Microscopy Based Dna Sensing And Manipulation, Matthew Shubert

Mechanical Engineering Undergraduate Honors Theses

Sequencing DNA provides a positive impact for the biomedical community by understanding a wide variety of applications such as human genetics, disease, and pathogens. The reason the Arkansas Micro & Nano Systems lab is involved with research in DNA sequencing is due to the current, leading industry method. Nanopore sequencing was developed by Oxford Nanopore Technology in which its sequencing method separates double stranded DNA to electrically characterize individual nucleotides traveling through a charged nanopore. Unfortunately, nanopore sequencing uses biological materials that require a shelf life and drives high cost. Therefore, the Arkansas Micro & Nano Systems lab has developed …

Pulse Rate Variability Analysis During Hemorrhage In An Experimental Porcine Model, Gabbie Bonvillain, Lauren Crimmins, Md Abul Hayat, Adria Abella Villafranca, Sam Stephens, Hanna K. Jensen, Joseph A. Sanford, Jingxian Wu, Kevin W. Sexton, Morten Jensen

Biomedical Engineering Undergraduate Honors Theses

During the acute phase of hemorrhage, heart rate and peripheral resistance increases to maintain proper oxygen delivery to vital organs. This response is mediated by the autonomic nervous system. Heart rate variability (HRV) has become a widely utilized measure to determine the autonomic nervous system control over the heart. Recently, pulse rate variability (PRV) has been suggested to serve as a surrogate for HRV. This study evaluates the ability of PRV obtained from peripheral arterial pressure waveforms as a method for detecting hemorrhage. Time domain and frequency domain metrics were evaluated for 5-minute and 15-minute arterial pressure waveform signals prior …

Localized Intra-Arterial Drug Delivery Device For Stroke Treatment, Benjamin Yip

Biomedical Engineering Undergraduate Honors Theses

Strokes are one of the leading causes of death and long-term disability in the United States, and according to the Centers for Disease Control and Prevention more than 795,000 people experience a stroke every year. Around 87% of all strokes are ischemic strokes making it the most common form of stroke. While ischemic strokes are treatable, current devices and methods still result in high mortality rates and high risks of hemorrhaging after treatment. The aim of this study is to design and test a prototype of a novel device for the localized delivery of thrombolytics to treat ischemic strokes. The …