Engineering Commons^™

The Deflection And Heat Transfer Analysis Of Injection Mold Cavity With Sla Cooling Channel Insert, Olumide Temidayo Aladesiun

Theses and Dissertations

Fast cooling in injection molding is the critical in the process economy. Among many different cooling channel designs available, conformal cooling offers the best and the most efficient cooling. However, limited awareness, accessibility, complexity, cost, knowledge, and experience limit the use of conformal cooling channels to be used into the mold in a molding process.

Typically, SLM(Selective Laser Melting) method is used to create cavity inserts with conformal cooling channels, however, due to the difficulties listed above, applications of conformal cooling channels are very limited. For an inexpensive alternative SLA (Stereolithography Apparatus) can print cavity inserts with conformal cooling channels. …

Fabrication And Characterization Of Force Spun Polymeric Nanofiber For Drug Delivery And Tissue Engineering Applications, Salahuddin Ahmed

Theses and Dissertations

This study focuses on the development and characterization of polymeric nanofiber for drug delivery and tissue engineering applications. In this study, poly(lactic-co-glycolic) acid (PLGA), Poly-vinyl alcohol (PVA), and Pullulan(PL) were used as the base polymers to develop the nanofiber. Bioactive components Oleanolic acid(OA), Oxymatrine(OM), and Salvianolic Acid(SA) were incorporated in PLGA, PVA, and PL, respectively, via solution mixing. The nano fiber systems were developed using the Forcespinning® method. Morphological, thermo-physical, and biological properties of the fiber mats were analyzed. The composite fiber system containing OA showed a very high drug loading efficiency. The composite fiber system containing high concentration of …

Schematic Design And Peer Review Of Gayaza Medical Center And Walk-In Clinic, Abigail Coffing, Alexis Buhr

Architectural Engineering

This report outlines the structural portion of the work done for the Gayaza Medical Center in Kampala, Uganda. This project was funded by HIINGA, an impact fund doing work in Eastern Africa, who tasked an interdisciplinary group of Cal Poly students with developing a preliminary design for the the medical center. The team consisted of Annebel van der Meulen (architecture), Abigail Coffing and Alexis Buhr (structural), and Arley Landis and Brett Shank (construction management). After completing the initial design, the structural team at Cal Poly rejoined the project the following quarter to do a peer analysis of the finalized structural …

Scan4façade: Automated As-Is Façade Modeling Of Historic High-Rise Buildings Using Drones And Ai, Yuhan Jiang, Sisi Han, Yong Bai

Civil and Environmental Engineering Faculty Research and Publications

This paper presents an automated as-is façade modeling method for existing and historic high-rise buildings, named Scan4Façade. To begin with, a camera drone with a spiral path is employed to capture building exterior images, and photogrammetry is used to conduct three-dimensional (3D) reconstruction and create mesh models for the scanned building façades. High-resolution façade orthoimages are then generated from mesh models and pixelwise segmented by an artificial intelligence (AI) model named U-net. A combined data augmentation strategy, including random flipping, rotation, resizing, perspective transformation, and color adjustment, is proposed for model training with a limited number of labels. As …

Evaluating Pedestrian Service Of The New Super Diverging Diamond Interchange On Three Case Study Sites In Denver, Colorado, Muhammad Tahmidul Haq, Amirarsalan Mehrara Molan, Khaled Ksaibati

Faculty and Student Publications

Ensuring safe and comfortable conditions for pedestrians necessitates specific strategies at intersections and service interchanges where traffic and pedestrians interact in complex ways with other modes of transportation. This study aims to investigate pedestrian performance at the new Super Diverging Diamond Interchange (Super DDI) using real-world locations (i.e., I-225 and Mississippi Ave, I-25 and 120th Ave, and I-25 and Hampden Ave in Denver, Colorado). Three alternative designs, typical DDI, and two versions of Super DDI were considered to make a reasonable comparison with the existing Conventional Diamond Interchange (CDI). A comprehensive series of simulation models (192 scenarios with 960 runs) …

An Exploration Into The Design Of A Portable Music Player For People With Alzheimer’S And Dementia, Jaxon V. Silva

Liberal Arts and Engineering Studies

An exploration into the design of a portable music player for people with Alzheimer's and dementia.

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Rotating Backing Brush, Caleb Savard, David Dalal, Max Allred, Mathis Weyrich

Mechanical Engineering

In the final steps of GAF’s shingle production process, small asphalt particles called fines are applied. Some fines adhere well to the shingle sheet, while others temporarily stick only to fall off the sheet further down the manufacturing line. As a result, the shingle plant floor is covered in fines that have fallen due to vibrations and gravity. The technicians and engineers at GAF want a cleaner working environment and to potentially reuse the loose fines. We are a senior project team that solved this problem by designing a system to remove and collect loose fines. In this document, the …

Baby Soothing Device, Grace Kalene Mekrut, Matteo Gozzini, Miles Angel Ibarra, Christian Joel Roberts

Mechanical Engineering

This document is the official final design review for the Baby Soothing Device. This product is intended to help families sleep throughout the night by allowing a baby to be soothed back to sleep without constant and direct parental interaction. It is maintained by Mechanical Engineering students at California Polytechnic State University, San Luis Obispo for Dustin Yoder, the project sponsor. The purpose of this document is to present the design process from ideation to finished design in great enough detail that its manufacturing procedure may be replicated if desired. This document further explains all the research, testing, and benchmarks …

The Bridge Newsletter Winter 2022, Missouri University Of Science And Technology

The Bridge Newsletter

-Missouri S&T CO2 research is rock solid
-Bringing circular economy to construction projects
-Ph.D. graduate wins Fellowship for solar farm protection research
-Rockne presents 2022 Mathes Lecture on ways to evolve engineering education
-Missouri S&T Ph.D. graduate wins $70,000 Laegeler Fellowship for solar farm protection research

A Qualitative Multi-Disciplinary Analysis Of Employers’ Technology Competency Perceptions For Graduates Readiness To The Workforce, Marcel Maghiar, Christopher M. Brown

Civil Engineering & Construction: Faculty Publications

To fully prepare college graduates to function competently and productively in their career, it is important to examine employers’ views of technology competency and graduates’ readiness. Using a qualitative approach by interviewing employers in South-eastern United States across a range of fields, the authors describe the major functions and dimensions of technology competency, compare similarities and differences across the disciplines, and integrate the results to inform theory and pedagogy. The main purpose of this research is to investigate how well new graduates from selected disciplines can transfer technological skills, how they learned and/or used these skills during their program of …

Importance Of Light Activation For Plant Cryptochrome And Antibacterial Drug Delivery Strategies, Merfat Ahmed Hammad

Theses and Dissertations

The goal of this project is to investigate the benefits of applying light in different systems. In the first part, the magnetoreception process that occurs in the light activated cryptochrome of Arabidopsis Thaliana was investigated. In the second part, photo-carbon monoxide releasing molecules (photo-CORMs) were investigated for their antibacterial effect to develop biomedical strategies. Overall, this has been achieved in three different studies. The first study investigated if the forward lightdriven reaction is involved in the magnetoreception process or not in cryptochrome (CRY). To accomplish this, the plant seedlings were tested for 90 minutes as follows: 5 minutes in the …

Compact Electrospray Propulsion Systems For Small Form-Factor Satellites: An Orbital Performance Survey & Platform Design, Alberto Meza

Open Access Theses & Dissertations

Over the past decades, small form-factor satellites such as CubeSats have remained as one of the most accessible platforms to reach space for universities, research institutions, private and governmental entities to perform a wide range of missions. This paper presents a survey into the design and implementation of an electrospray rail thruster, to be integrated to the CubeSat platform. The design investigated features propellant tanks for each individual thruster embedded inside the rail of a standard 1U CubeSat. The capabilities of utilizing the electrospray thruster as an attitude & determination control system was also investigated in which, a pointing accuracy …

Influence Evaluation On Near-Road Concentrations Of Pm2.5 During Covid-19 Pandemic, Marcos Alan Banda Morales

Open Access Theses & Dissertations

SARS-CoV-2, also known as COVID-19, was discovered in Wuhan, China in late 2019and spread rapidly worldwide in 2020. The COVID-19 pandemic and its quarantine periods influenced the number of people using their vehicles and the number of miles traveled, which correspondingly influenced the air quality of urban areas. The influence of the restrictions caused by the quarantine period on air quality differs from location to location. Previous research accounted for countries, but no research was done at the state level individually. This research attempts to evaluate the transportation-related air quality during the COVID-19 pandemic period using data from the Texas …

Optimized Learning Using Fuzzy-Inference-Assisted Algorithms For Deep Learning, Miroslava Barua

Open Access Theses & Dissertations

For years, researchers in Artificial Intelligence (AI) and Deep Learning (DL) observed that performance of a Deep Learning Network (DLN) could be improved by using larger and larger datasets coupled with complex network architectures. Although these strategies yield remarkable results, they have limits, dictated by data quantity and quality, rising costs by the increased computational power, or, more frequently, by long training times on networks that are very large. Training DLN requires laborious work involving multiple layers of densely connected neurons, updates to millions of network parameters, while potentially iterating thousands of times through millions of entries in a big …

Processes & Toolchain For Automation Of Hybrid Direct-Write 3d Printing, Gilbert Thomas Carranza

Open Access Theses & Dissertations

Hybrid 3D printing has evolved from a means to rapidly prototype devices to a fully viable means of manufacturing final products. In particular, electronic and electromagnetic devices have been a focus of hybrid 3D printing multi material structures. However, while the hardware capabilities have been around for years, the software capabilities have only begun to catch up. A process and toolchain for hybrid 3D printing is critically needed.This work details a process and toolchain for hybrid 3D printing metal dielectric structures. In it, a basic slicing algorithm is shown along with off-axis printing and conformal printing for arbitrary curvatures. These …

Transportation Asset Management For The Electric Road System, Kamalen Maria Santos Diaz

Open Access Theses & Dissertations

Electric road systems (ERS) have been presented as a new solution towards a sustainable transportation future, fueling the widespread adoption of electric vehicles by eliminating range anxiety, reducing battery size, and being regional friendly. These systems consist of four components: electric power supply, roads, vehicles, and operations. Much of the early research conducted on ERS has been on how to initially construct these systems by focusing on the first three components, however, there is limited knowledge on how ERS will impact traditional road operations after the systems are in place. Transportation Asset Management (TAM), a major focus within the transportation …

Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites, Sergio Dante Favela

Open Access Theses & Dissertations

This research will be divided into two sections. The first section discusses direct ink writing and thermomechanical characterization for thermoset composites. The thermoset ink is prepared with fillers aiding the printing process by modifying the rheology of the ink and geometry retention by allowing for the part to have an initial UV cure step. Three specimen formulations with different weight percentages were printed by material extrusion in the shape of tensile specimens following ASTM standard D638 to characterize the mechanical properties at room temperature, 100â?? and 200â??. Furthermore, the ink resin was characterized through DSC, TGA, and rheology testing. The …

Infiltration-Controlled Combustion Of Lithium And Magnesium Powders And Reactions Of Lithium With Oxygen And Carbon Dioxide, Kevin Samuel Estala Rodriguez

Open Access Theses & Dissertations

Chemical heat integrated power systems are of great interest for space missions where solar energy, nuclear energy, and batteries are not available or are not practical to use. A new concept of a power system is a metal combustor coupled with a chemical oxygen generator, where the generated oxygen infiltrates through the metal powder or combustion products. The combustion of lithium and magnesium powders under these conditions has not been studied yet. The present work investigates combustion of magnesium powder and stabilized lithium metal powder (SLMP) ignited by a laser inside a closed chamber filled with O2 or CO2. It …

Engineering 3d Bioprinted Cardiac Spheroidal Droplets With Cardiomyocytes And Cardiac Fibroblasts For Tissue Engineering And Drug Cytotoxicity Studies, Raven El Khoury

Open Access Theses & Dissertations

Engineering is the supreme human endeavor that involves harnessing the scientific understanding of the natural world to design and invent objects to improve the society around us. Biomedical engineering is the implementation of concepts acquired from engineering in biology and medicine that aims to improve human health through the integration of engineering with biomedical sciences. The mission of a biomedical engineer is to develop technologies that help advance the quality of peopleâ??s health using various tools and materials with one passion and goal: making the patient's life longer and easier. Tissue engineering is developed from the field of biomaterials and …

Achieving Safe Use Of Advanced Materials In Drinking Water Through Novel Nano Analytics And Enabling Electrification Using Green Catalyst, Kenneth Ray Flores

Open Access Theses & Dissertations

The accumulation of engineered nanomaterials (ENMs) in environmental sectors will continue to increase as more applications are discovered for their unique properties and characteristics. Additionally, the presence of nanomaterials in the environment becomes exacerbated as more consumer products containing nanoparticles are approved for use. It is debated whether the toxic effects of nanoparticles stem from the particles themselves, ionic species, or formation of secondary particles. Therefore, understanding the behavior of nanoparticles in the environment becomes key to discerning the toxicological effects of nanoparticles. Many advancements have been made with ICP-MS to understand the behavior of nanoparticles in the environmental systems, …

Online/Incremental Learning To Mitigate Concept Drift In Network Traffic Classification, Alberto R. De La Rosa

Open Access Theses & Dissertations

Communication networks play a large role in our everyday lives. COVID19 pandemic in 2020 highlighted their importance as most jobs had to be moved to remote work environments. It is possible that the spread of the virus, the death toll, and the economic consequences would have been much worse without communication networks. To remove sole dependence on one equipment vendor, networks are heterogeneous by design. Due to this, as well as their increasing size, network management has become overwhelming for network managers. For this reason, automating network management will have a significant positive impact. Machine learning and software defined networking …

Nano-Engineered Soft Magnets: Potential Application In Water Treatment, Hyperthermia And Molecular (Organic) Magnets, Yohannes Weldemariam Getahun

Open Access Theses & Dissertations

Scrutinizing the remarkable and tunable properties of magnetic materials at a nanoscale size "There's Plenty of Room at the Bottom..." Richard Feynman, this study attempts to find sustainable solutions to some of the deteriorating environmental, health, and energy problems the world is encountering. Due to their simple preparation, surface adaptability, and tunable magnetic and optical properties, magnetic nanoparticles have been extensively investigated in water treatment, cancer therapy, data storage, and more. However, relying on non-reusable and chemical-based treatment agents in water, complex and costly cancer treatment procedures and molecular magnets that operate far below room temperature limited those attempts from …

Direct Potable Reuse Piloting: Optimizing Chloramination, Operationalizing Ultrafiltration, And Understanding Zero Liquid Discharge Options, Marcela Carolina Herrera

Open Access Theses & Dissertations

A pilot study was deployed at the John T. Hickerson Water Reclamation facility to analyze the viability of high recovery direct potable water reuse (DPR), aiming for zero liquid discharge (ZLD). This pilot consists of a chloramination system and ultrafiltration (UF) as pretreatment for reserve osmosis (RO) followed by UV-peroxide, granular activated carbon (GAC), and concentrate-enhanced recovery reverse osmosis (CERRO). Stabilizing the chloramination and UF system was the first step to ensure efficiency during the downstream processes. The formation of monochloramine is essential for the mitigation of biofouling of the UF membranes. The formation of monochloramine occurs by specific liquid …

The Qualification Of Sealability And Creep Relaxation Of Additively Manufactured Zytel Gaskets For Pem Fuel Cells, Robert Lazarin

Open Access Theses & Dissertations

The purpose of this thesis is to study the feasibility of low-cost additive manufacturing of gaskets for proton exchange membrane fuel cells exposed to extreme temperature conditions ranging from -55°C to 100°C. With the growing popularity and decreasing costs of additive manufacturing technologies, specifically Material Extrusion (ME), research is being conducted to determine the feasibility of ME components. Thermally cycled PEMFCs may exhibit accelerated gasket deterioration, therefore, the mechanical stability of material extruded gaskets following a harsh thermal cycle must be assessed. The feasibility of the material extruded gaskets will be proven by manufacturing optimization and mechanical testing. The target …

High-Temperature Valve Design For A Solid Oxide Fuel Cell/Gas Turbine Hybrid System Utilizing Smart Materials, Alba Jazmin Leyva

Open Access Theses & Dissertations

The topic of this project includes extensive research on the Solid Oxide Fuel Cell Gas Turbine (SOFC/GT) hybrid system located at the National Energy Technology Laboratory. The goal is to reduce pollution and generate energy by using natural gas and a combination of fuel cells, heat exchangers, bypass valves, turbines, and combustors as components working together to produce clean energy. The SOFC/GT system works by having the fuel cell pressurized by the gas turbine. The turbine then produces exhaust gas for the fuel cell, because the turbine recovers the majority of the heat and the pressurization contributes to the enhancement …

Investigation Into The Economic Viability Of Industry 4.0 Practices In A Small Start-Up Setting: A Case Study, Joseph Lindley

Open Access Theses & Dissertations

Industry 4.0 has been a hot button topic since the first rumouringâ??s of a fourth industrial revolution taking place in the early 2010s. Since that time many companies have attempted to transform their process, procedures, and systems to become streamlined, efficient, and overall, more profitable. An example of this can be seen in companies such as Microsoft and IBM, Mitsubishi and Siemens who have gained a stronger foothold in their respective markets by their efficient implementation of Industry 4.0. Before we can address how small start-up companies can begin to compete with these behemoths, we must address the question; what …

Novel Interlaminar Reinforcement To Enhance The Impact Damage Resistance Of Carbon Fiber-Reinforced Polymer Matrix Composites, Daisy Haidee Mariscal

Open Access Theses & Dissertations

Aerospace, aircraft, marine, and automobile applications are increasingly using composite materials for lighter, higher stiffness, and strength properties. Despite these advantages, composite materials have one major disadvantage. The through-thickness properties are extremely weak when subjected to impact damage. When a composite material is subjected to a low-velocity impact, there is hardly any visible damage on the surface compromising the composite material internally without any external notice. Internal damage may be delamination, which is the most common, matrix cracking, and fiber breakage. A composite material is made up of layers of fiber. The interlaminar region is located in between these layers. …

Intelligent Autonomous Inspections Using Deep Learning And Detection Markers, Alejandro Martinez Acosta

Open Access Theses & Dissertations

Inspection of industrial and scientific facilities is a crucial task that must be performed regularly. These inspections tasks ensure that the facilityâ??s structure is in safe operational conditions for humans. Furthermore,the safe operation of industrial machinery, is dependent on the conditions of the environment. For safety reasons, inspections for both structural integrity and equipment is often manually performed by operators or technicians. Naturally, this is often a tedious and laborious task. Additionally, buildings and structures frequently contain hard to reach or dangerous areas, which leads to the harm, injury or death of humans. Autonomous robotic systems offer an attractive solution …

Security Analysis And Implementation Of Dnp3 Multilayer Protocol For Secure And Safe Communication In Scada Systems, Isaac Monroy

Open Access Theses & Dissertations

When SCADA systems were first introduced into society, a lot of manpower was required for monitoring and controlling devices within critical infrastructures. With the increasing demand for services and growing systems, a need arose to automate the monitoring and controlling tasks. This led to introduction of networks into SCADA systems to enhance monitoring and control capabilities, that can scale with system size and requirements. But this introduction of network layer along with its advantages, also introduced a new threat surface which exposed multiple vulnerabilities within the system that can exploited to launch attacks, that led to the integration of security …