Engineering Commons^™

Extended Cross-Referenced Analysis Using Data From The Landsat 8 And 9 Underfly Event, Garrison Gross

Electronic Theses and Dissertations

The Landsat 8 and 9 Underfly Event occurred in November 2021, where Landsat 9 flew beneath Landsat 8 in the final stages before settling in its final orbiting path. An analysis was performed on the images taken during this event, which resulted in a cross-referenced with uncertainties estimated to be less than 0.5%. This level of precision was due in part to the near-identical sensors aboard each instrument as well as the underfly event itself, which allowed the sensors to take nearly the exact same image at nearly the exact same time. This initial calibration was applied before the end …

Nucleotide Detection Mechanism And Comparison Based On Low-Dimensional Materials: A Review, M. Mustafa Azeem, Muhammad Shafa, Muhammad Aamir, Muhammad Zubair, Basma Souayeh, Mir Waqas Alam

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various …

The Development Of Dark Hyperspectral Absolute Calibration Model Using Extended Pseudo Invariant Calibration Sites At A Global Scale: Dark Epics-Global, Padam Bahadur Karki

Electronic Theses and Dissertations

This research aimed to develop a novel dark hyperspectral absolute calibration (DAHAC) model using stable dark targets of "Global Cluster - 36" (GC-36), one of the clusters from "300 Class Global Classification." The stable dark sites were identified from GC-36 called "Dark EPICS-Global" covering the surface types viz; dark rock, volcanic area, and dark sand. The Dark EPICS-Global shows a temporal variation of 0.02 unit reflectance. This work uses the Landsat-8 (L8) Operational Land Imager (OLI) , Sentinel-2A (S2A) Multispectral Instrument (MSI) , and Earth Observing One (EO-1) Hyperion data for the DAHAC model development, where well-calibrated L8 and S2A …

Initial Procedure For Small-Scale Extraction Of Subsurface Martian Ice, Evan Steers

Electronic Theses and Dissertations

For decades, NASA has been surveying the surface of Mars with plans for human exploration. Due to recent advancements, there is strong evidence to believe that frozen aquifers beneath the Martian surface hold great amounts of usable H2O. Since the discovery of water on Mars, NASA has expressed key interest in harvesting this valuable resource. The presence of usable H2O on Mars could reduce the launching mass of future missions by giving astronauts the capability to harvest water once they have landed on Mars. This research focuses on the optimization of a current design to extract Martian water and the …

Nio Nanoparticles-Decorated Carbon Fiber Cloth As Lithiophilic Host Material For Stable Lithium Metal Batteries, Sarwar Ahmed

Electronic Theses and Dissertations

Lithium metal is considered the Holy Grail for the anode for next-generation rechargeable batteries. Lithium metal has the highest theoretical capacity and lowest anode potential with respect to the standard hydrogen electrode (SHE). However, its commercialization is hindered by uncontrolled dendrite growth, weak solid electrolyte interphase (SEI), and low coulombic efficiency. The dendrite formation leads to a short circuit between the anode and cathode, which creates a dangerous safety issue. Several host materials and artificial SEI layers have been developed to suppress these issues. However, the effectiveness of these solutions is limited. More research is needed to develop more efficient …

Efficacy, Durability And Design Of A Bucket Wheel Excavator For Icy Lunar Regolith, Austin Lohsandt

Electronic Theses and Dissertations

This research project focused on the design and testing of a prototype bucket wheel excavator developed for NASA's Break the Ice Lunar Challenge, which sought innovative ideas for lunar excavation. Several attempts have been made by other universities and private industries to create systems that can successfully excavate simulated frozen regolith, however, few have been successful. The chosen excavation technology employed a bucket wheel concept inspired by large open-pit mining machines, modified to incorporate grinding nubs for pulverizing lunar simulant material. The goals included proving the viability of a bucket wheel excavator for lunar excavation, exploring grinding nubs, conducting durability …

Mechanical Properties Evaluation Of 3d Printed Petg And Pctg Polymers, Kalpesh Krishnarao Bhosale

Electronic Theses and Dissertations

3D printing is also known as additive manufacturing (AM) which has become a popular manufacturing trend over the years. Due to its unique advantages of fast production rate, ability to create complex geometrical features, toolless manufacturing and many more attracts various industries from Aerospace to general cosmetics. Along with the advancement in material science, various polymers including Polylactic Acid (PLA), Polyethylene terephthalate glycol (PETG) and many more are available for 3D printing. Due to the wide range of applications in PLA, it is necessary to improve its toughness to make it more suitable by adding Poly Cyclohexylenedimethylene Terephthalate glycol (PCTG) …

Modeling Thermal Radiation In Combustion Environments: Progress And Challenges, Sandip Mazumder, Somesh P. Roy

Mechanical Engineering Faculty Research and Publications

Modeling thermal radiation in combustion environments can be extremely challenging for two main reasons. First, the radiative transfer equation (RTE), which is the cornerstone of modeling radiation in such environments, is a five-dimensional integro-differential equation. Second, the absorption and scattering coefficients of molecular gases and particulates prevalent in combustion environments oscillate strongly with the wavenumber (or wavelength), i.e., the medium is strongly nongray, requiring the solution of the RTE for a large number of wavenumbers. This article reviews the progress that has been made in this area to date with an emphasis on the work performed over the past three …

How Will Air Source Heat Pumps Affect Electricity Load Profiles In Buildings In Ireland? A Data Logger Used To Model Electrical Energy Profiles, Michael Mcdonald

Conference papers

There are many global factors that are challenging the colossal transition to Zero Carbon Economy, ranging from regional conflicts, possible new cold wars, inflation to rising interest rates. The climate challenge is, de facto, an energy transition challenge, which historically takes generations. Governments all over the world are working to implement policy that encourages society to foster clean energy and low carbon technologies. It is a fine balance between supply and demand of energy networks, whilst maintaining energy security. This was evident in Ireland during the winter of 2022 which witnessed several Systems Alerts, from the Transmission System Operator (TSO), …

Energy-Aware Ai-Driven Framework For Edge-Computing-Based Iot Applications, Muhammad Zawish, Nouman Ashraf, Rafay Iqbal Ansari, Steven Davy

Conference papers

The significant growth in the number of Internet of Things (IoT) devices has given impetus to the idea of edge computing for several applications. In addition, energy harvestable or wireless-powered wearable devices are envisioned to empower the edge intelligence in IoT applications. However, the intermittent energy supply and network connectivity of such devices in scenarios including remote areas and hard-to-reach regions such as in-body applications can limit the performance of edge computing-based IoT applications. Hence, deploying state-of-the-art convolutional neural networks (CNNs) on such energy-constrained devices is not feasible due to their computational cost. Existing model compression methods, such as network …

Effect Of Eggshell Powder And Nano-Hydroxyapatite On The Surface Roughness And Microhardness Of Bleached Enamel, Shahinaz Hassan, Lamiaa Moharam

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: The aim of the study was to evaluate the remineralizing potential of prepared solutions of eggshell powder (ESP) and nano-hydroxyapatite (nHA) on the surface roughness and microhardness of bleached enamel. Materials and Methods: Fifty bovine anterior teeth were selected and cleaned then bleached using a chemically activated in-office bleaching agent then the teeth were randomly allocated into five groups (n = 10) according to the tested remineralizing agents (10% ESP solution, 10% nHA solution, and MI Paste Plus) into; control, bleached, bleached + ESP solution, bleached + nHA solution, and bleached + MI Paste Plus groups. Then, the teeth …

Extending The Nno Ballistic Limit Equation To Foam-Filled Dual-Wall Systems, William P. Schonberg

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A key component in the quantitative assessment of the risk posed to spacecraft by the micrometeoroid and orbital debris (MMOD) environment is frequently referred to as a ballistic limit equation (BLE). A frequently used BLE for dual-wall configurations (which are commonly used on spacecraft to protect them against the MMOD environment) is the New Non-Optimum, or "NNO", BLE. In design applications where a BLE is needed for a new structural system that has not yet been tested, but resembles to a fair degree a dual-wall system, it is common practice to equivalence the materials, thicknesses, etc., of the new system …

Evaluation Of Thermal And Rheological Properties Of Phase Change Material-Incorporated Asphalt Mastic With Porous Fillers, Farshad Saberi Kerahroudi, Yizhuang David Wang, Jenny Liu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Incorporating phase change material (PCM) into paving materials can regulate the pavement temperature, improve the pavement durability, and mitigate the heat-island effects. In this research, porous fillers were used as the PCM carrier, and the thermal and rheological behaviors of the asphalt mastic with the PCM were evaluated. Two different carrier materials (diatomite and expanded perlite) and four types of PCMs were used in the study. The candidate filler, PCM, and proper blending ratios were determined based on the results of scanning electron microscope image analysis, the filter paper test, and the temperature sweep test. The thermal and rheological behaviors …

Novel Design And Synthesis Of Noble Metal Cluster Decorated Ironoxyfluoride Nanorods For Applications In Lithium-Ion Batteries And Water Splitting Catalysis, Dilann Yasin

Wayne State University Theses

Lithium-ion batteries have emerged as the preferred rechargeable energy storage system for vehicles and small electronics in order to help combat the environmental issues of our time. LIBs play an increasingly important role in the electrification of internal combustion engine vehicles. The performances of existing LIBs have plateaued after decades of research and development. In addition, cost and abundance of the most common battery materials, Lithium, Nickel and Cobalt, have become an issue in the world of energy storage systems. Therefore, in order to meet the increasing demand for safe and cheap energy storage, next‐generation batteries with dramatically improved electrochemical …

Modeling Of The Chest Wall Response To Prolonged Bracing In Pectus Carinatum, Brandon Sargent, Katie Varela, Dennis Eggett, Emily Mckenna, Christina Bates, Rebeccah Brown, Victor Garcia, Larry Howell

Biomedical Engineering Faculty Scholarship

Pectus carinatum is a chest wall deformity that is often treated through the wearing of an external brace. The treatment of the deformity could benefit from a greater understanding of chest wall characteristics under prolonged loading. These characteristics are difficult to model directly but empirical studies can be used to create statistical models. 185 patients from 2018-2020 received bracing treatment. Data on the severity of the deformity, treatment pressures, and time of wear were recorded at the first fitting and all subsequent follow-up visits. This data was analyzed using a statistical mixed effects model to identify significant measures and trends …

Accessibility Of Health Data Representations For Older Adults: Challenges And Opportunities For Design, Peterson Jean, Emma Murphy, Enda Bates

Books/Book Chapters

Health data of consumer off-the-shelf wearable devices is often conveyed to users through visual data representations and analyses. However, this is not always accessible to people with disabilities or older people due to low vision, cognitive impairments or literacy issues. Due to trade-offs between aesthetics predominance or information overload, real-time user feedback may not be conveyed easily from sensor devices through visual cues like graphs and texts. These difficulties may hinder critical data understanding. Additional auditory and tactile feedback can also provide immediate and accessible cues from these wearable devices, but it is necessary to understand existing data representation limitations …

The Role Of Teacher Agency In Using Gis To Teach Sustainability: An Evaluation Of A Lower Secondary School Story Mapping Gis Initiative In Ireland, Sasha Brown, Zerrin Doganca Kucuk, Angela Rickard, James Lonergan, Rachel Abernethy, Lorraine Mcnerney, Ronan Foley, Avril Behan, Aengus Byrne, Bernard Essel, Jack Ffrench, Jonathan Faull, Conor Cahalane

Articles

This paper investigates the role of teacher agency for those who were trained in using an innovative Geographic Information Systems (GIS) approach and incorporated GIS into their teaching. While national curricula increasingly emphasise STEM and sustainability approaches, there has been limited analysis of how teachers can bring new software, including GIS, and new approaches into the classroom. Through an evaluation of a teaching initiative “5*S: Space, Surveyors and Students – STEM and the Sustainable Development Goals” designed to bring GIS technology, satellite data, and the Sustainable Development Goals (SDGs) into classrooms as activities and resources for teachers and students in …

Shaping A Sustainable Future Through Integrating Sustainability, Creativity And Entrepreneurship In Engineering Education At Aalto University, Paulo Roberto Nicoletti Dziobczenski, Elina Kähkönen, Håkan Mitts

Practice Papers

This paper reports the authors’ experiences integrating sustainability, creativity, and entrepreneurship in engineering education at Aalto University under the project called the Aalto Co-Educator team. The Aalto Co-Educator team was formed to support the university strategy application into education through three main actions: course development, curriculum development and competence development. The goal of this paper is to share engineering educators' experiences in providing sustainability, creativity and entrepreneurship education to engineering students in a rapidly changing nature of work.

A Way To Get Students Consider Ethics And Sustainability In Iot Projects, Jean-Luc Sarrade, Isabelle Lermigeaux-Sarrade

Practice Papers

Sustainability and ethical topics can be embedded and assessed in existing technical courses within an engineering curriculum. This article describes how we integrated a reflection on the importance of ethical and environmental aspects of connected objects through team-based project learning with computer science students in the second semester of their Bachelor degree. Small groups of three were given different projects, in which they had to implement the technical concepts learned in class using both virtual and physical components. The projects followed realistic scenarios chosen at random, each of them using a specific set of sensors and built to question either …

Enhancing Zero‑Shot Action Recognition In Videos By Combining Gans With Text And Images, Kaiqiang Huang, Luis Miralles-Pechuán, Susan Mckeever

Articles

Zero-shot action recognition (ZSAR) tackles the problem of recognising actions that have not been seen by the model during the training phase. Various techniques have been used to achieve ZSAR in the field of human action recognition (HAR) in videos. Techniques based on generative adversarial networks (GANs) are the most promising in terms of performance. GANs are trained to generate representations of unseen videos conditioned on information related to the unseen classes, such as class label embeddings. In this paper, we present an approach based on combining information from two different GANs, both of which generate a visual representation of …

Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations, Matt Libby

Honors Theses and Capstones

No abstract provided.

Constructing A Fine Dispersion And Chemical Interface Based On An Electrostatic Self-Assembly And Aqueous Phase Compound In Go/Sio2/Sbr Composites To Achieve High-Wear Resistance In Eco-Friendly Green Tires, Rui Zhang, Jiaye Li, Stephen Jerrams, Shui Hu, Shipeng Wen, Ligun Zhang

Articles

The hazard to the ecosystem caused by rubber microparticles generated from tire abrasion has been a constant concern. Therefore, to protect this ecosystem, the development of a tire tread with high abrasion resistance is especially significant. Herein, γ-aminopropyltriethoxysilane (APTES) was used to modify graphene oxide (GO) and silica (SiO2) to obtain GO and SiO2 with positive charges (NG and NS). Furthermore, NG and NS were electrostatically self-assembled by using maleic anhydride (MAH) hydrolysis, thereby obtaining composite particles (NG-NS) with “bridged structures”. Also, the NG-NS/styrene butadiene rubber (SBR) compounds possessing fine dispersion of NG-NS were prepared by the aqueous compounding method. …

Surface Modification Of Carbonyl Iron Particles Using Dopamine And Silane Coupling Agent For High-Performance Magnetorheological Elastomers, Jiaqing Zhao, Dongliang Li, Baojie Sun, Liang Jiang, Yanfen Zhou, Shipeng Wen, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

Magnetorheological elastomers (MREs) are smart materials whose mechanical properties can quickly respond to changes in the external magnetic field. This phenomenon is known as the magnetorheological (MR) effect and is the key to the application of magnetorheological elastomers. Previous studies have found that the interface between magnetic particles and elastomers is a critical factor that influencing the MR effect of MREs. To improve the interfacial interaction between silicone rubber (SR) and carbonyl iron (CI) particles, in the MREs considered in this work, CI particles were subjected to surface modification through polydopamine (PDA) deposition and n-dodecyltrimethoxysilane (DTMS) grafting. X-ray photoelectron spectroscopy …

Spherical Modes Driven Directional Modulation With A Compact Mimo Antenna, Abel Zamdemala, Nicola Marchetti, Max Ammann, Adam Narbudowicz

Articles

In this letter, a compact beamsteering MIMO antenna is proposed for Directional Modulation (DM) applications. A generalization of the beamsteering principle is presented and by exploiting the antenna’s unidirectional beamsteering capability within the entire azimuth plane, the system realizes secure steerable transmissions in the direction of the legitimate receiver, with a low Bit Error Rate (BER) of 10^(-5), while a high error rate of 10^(-1) is seen outside the desired regions. Numerical and experimental verifications are carried out to validate the proposed concept and comparisons with circular arrays are conducted, revealing that the system achieves comparable performance but with up …

Exploiting Multimode Antennas For Mimo And Aoa Estimation In Size-Constrained Iot Devices, Abel Zandamela, Alessandro Chiumento Alessandro Chiumento, Alessandro Chiumento, Nicola Marchetti, Max Ammann, Adam Narbudowicz

Articles

This work proposes compact multimode Multiple-Input–Multiple-Output (MIMO) antennas for Angle of Arrival (AoA) estimation in miniaturized Internet of Things (IoT) systems. The method excites different orthogonal radiating modes (TM 21 , TM 02 , and TM 31 modes) for beamforming capabilities, and the AoA performance is investigated using the Multiple Signal Classification (MUSIC) algorithm, executed using numerical and experimental data. The technique is tested at 2.238GHz , while using an antenna diameter

A Label-Free Fiber Ring Laser Biosensor For Ultrahigh Sensitivity Detection Of Salmonella Typhimurium, Shi Qiu, Bin Liu, Yuankui Leng, Edward Fox, Xian Zhou, Binbin Yan, Xinzhu Sang, Long Long, Xingdao He, Jinhui Yuan, Gerald Farrell, Qiang Wu

Articles

The rapid detection of low concentrations of Salmonella Typhimurium (S. Typhimurium) is an essential preventive measure for food safety and prevention of foodborne illness. The study presented in this paper addresses this critical issue by proposing a single mode-tapered seven core-single mode (STSS) fiber ring laser (FRL) biosensor for S. Typhimurium detection. The experimental results show that the specific detection time of S. Typhimurium is less than 20 min and the wavelength shift can achieve -0.906 nm for an S. Typhimurium solution (10 cells/mL). Furthermore, at a lower concentration of 1 cell/mL applied to the biosensor, a result of -0.183 …

A Framework For Teaching Machine Learning For Engineers, Lauren Singelmann, Jacob Covarrubias

Practice Papers

As machine learning and artificial intelligence become increasingly prevalent in our day-to-day lives, there becomes an even greater need for literacy in machine learning for those outside of the computer science domain. This work proposes a conceptual framework for teaching machine learning to engineering students with the goal of developing the knowledge and skills needed to apply machine learning techniques to engineering problems.

Many machine learning courses in computer science, math, and statistics focus on the theoretical basis of machine learning algorithms and assessment. This framework takes a fundamentally different approach by creating a course structure for machine learning practitioners …

Ethical Concerns And Responsible Use Of Generative Artificial Intelligence In Engineering Education, Aditya Johri, Euan Lindsay, Junaid Qadir

Practice Papers

The use of educational technologies that use elements of machine learning (ML) and artificial intelligence (AI) are becoming common across the engineering education terrain. With the wide adoption of generative AI based applications, this trend is only going to grow. Not only is the use of these technologies going to impact teaching, but engineering education research practices are as likely to be affected as well. From data generation and analysis, to writing and presentation, all aspects of research will potentially be shaped. In this practice paper we discuss the ethical implications of the use of generative AI technologies on engineering …

A New Approach To Encourage The Next Generation Of Female Engineers In Spain: A Young And Fresh Podcast To Attract More Girls To The Field: “Clau, Quiero Ser Ingeniera”, Marta Olea, Francisco Javier Jiménez Leube, Claudia Rebollo

Practice Papers

The underrepresentation of women in STEM fields is a complex issue with multiple factors that remain unclear. At Universidad Politécnica de Madrid (UPM), we have dedicated years to devising strategies aimed at attracting more girls to this domain. As the coordinating institution of the EELISA alliance, where we endeavor to define the European engineer, we confront gender inequality as one of the foremost challenges. To address this need, a 4th year student at UPM conceived an initiative: a podcast with three primary objectives. Firstly, it aims to highlight the accomplishments of female engineers who can serve as role models for …

Designing A Curriculum For A Sustainable Entrepreneurship Major: A Case Study, Meri Kuikka

Practice Papers

This practice paper explores the process of developing a curriculum for a sustainable entrepreneurship major program in a higher education institution. The paper aims to address the need for embedding sustainability and entrepreneurship into higher education, considering global challenges such as climate change, social inequality, and unsustainable consumption and production. The paper fills a gap in the existing body of knowledge by providing a case example of a curriculum development process that can be adapted to integrate sustainable entrepreneurship into curricula at other universities.

The paper outlines a three-part curriculum development process which involves identifying stakeholders and clarifying the program's …