Engineering Commons^™

Simulation On Cooperative Control Of Connected And Automated Vehicles At Interchange Based On Petri Net, Mingbao Pang, Zhen Liu

Journal of System Simulation

Abstract: To improve the traffic efficiency of interchange, a simulation model of complete process is built by timed Petri net (TdPN) considering multiple separation and merging behaviors in the process of connected and automated vehicles (CAVs) passing through the interchange. In the light of vehicle priority, a speed guidance strategy is proposed and a CAVs cooperative control model is established, so as to form a complete interchange TdPN model. This method is verified by simulation and compared with the cooperative control method of interchange exit and its connecting area, cooperative control method of multi-merging areas within the interchange. The results …

Multi-Strategy Hybrid Abc For Microarray High-Dimensional Feature Selection, Chuandong Qin, Baosheng Li, Baole Han

Journal of System Simulation

Abstract: Traditional feature selection approaches have major limitations for high-dimensional microarrays, and it is difficult to accurately and efficiently propose the best feature subset. To address this problem, a multi-strategy hybrid artificial bee colony (ABC) algorithm based on wrapper is proposed, which mixes chaotic opposition-based learning strategy, elite guidance strategy, and Mantegna Lévy distribution strategy, and proposes two new search strategies in the employed and onlooker bee phases respectively. A new objective function is proposed for the microarray high-dimensional feature selection problem, which balances the optimal performance of the model with the minimization of the feature subset …

Multi-Media Energy Planning Optimization Of Steel Based On Improved Moea/D, Hongcai Ouyang, Dinghui Wu, Junyan Fan, Jing Wang

Journal of System Simulation

Abstract: To address the problems of multi-media iron and steel energy planning model with more variables, complex constraints and high difficulty in model solving, an improved MOEA/D (decomposition-based multi-objective evolutionary algorithm) based on adaptive neighborhood is proposed to realize multi-media energy planning optimization. Considering the characteristics of TOU price and the buffer effect of gas holder, the objective function to minimize operation cost and total energy consumption is constructed. And the model constraints are designed such as energy supply and demand balance. The decoding method based on energy production and consumption rules is designed to determine the target value. The …

Costume Pattern Sketch Colorization And Style Transfer Based On Neural Network, Xingquan Cai, Zhijun Li, Mengyao Xi, Haiyan Sun

Journal of System Simulation

Abstract: Aiming at the problems of color overflow in pattern sketch colorization and lack of fabric texture features in style transfer, this paper proposes a method of costume pattern sketch colorization and style transfer based on neural network. This paper initializes the data set, collects the costume pattern image, extracts the costume pattern sketch, synthesizes the costume pattern sketch with color features and constructs the style data set. The research builds the conditional generative adversarial nets and achieves the costume pattern sketch with color features colorization based on the generator. The study constructs a convolutional neural network model, uses the …

Dynamic Performance Evaluation Method For Transfer In Rail Transit Station Based On Station Simulation And Lstm, Bisheng He, Hongxiang Zhang, Yongjun Zhu, Gongyuan Lu

Journal of System Simulation

Abstract: Given the boom increasing of rail transit passenger volume, the dynamic performance evaluation method for transfer in rail transit stations based on machine learning are proposed to effectively evaluate the performance of the transfer station in different scenarios. Based on the proposed dynamic performance evaluation indexes of effective transfer number, transfer time and congestion, the influence factors of station dynamic performance are analyzed. The simulation model integrated train operation and pedestrian movement is built to provide the time-series data for the machine learning method. The long short-term memory (LSTM) is implemented to forecast the evaluation indicators, and the …

Application Of Digital Twin Model In Grinding Of Bearing Rings, Hongbin Liu, Zhiqiang Shen, Yize Wang, Ming Qiu, Wenrong Lin

Journal of System Simulation

Abstract: The digital twin model can effectively promote the virtual-real interaction between the actual product and the product model. Aiming at the grinding force generated in the grinding process of spherical roller bearings, this paper constructs the bearing ring raceway grinding process by performing dynamics, contact algorithm modeling and rigid-flexible coupling treatment on the components of the grinding work area. The digital twin model completes the virtual mapping of the grinding work area of the bearing ring in the digital space. The model is used to analyze and test the process parameters such as the grinding wheel linear speed and …

Integrated Soft Sensor Modeling Of Fermentation Process Based On Transfer Component Analysis, Yuesheng Zhou, Weili Xiong

Journal of System Simulation

Abstract: The Penicillin fermentation process is an uncertain and multi-stage process. There are different working conditions among different batch fermentation processes, and the distribution of process data is not necessarily the same, which degrades the performance of the traditional soft sensing model. Combined with the transfer learning strategy and Gaussian mixture model, a multi-model ensemble soft sensor modeling method based on transfer component analysis is proposed. In this method, the transfer component analysis is used to get the shared feature mapping matrix between samples, and adapt the edge probability distribution of labeled dataset and unlabeled dataset; the modeling data are …

Hyper-Heuristic Three Dimensional Eda For Solving Green Two-Sided Assembly Line Balancing Problem, Rong Hu, Shuai Ding, Bin Qian, Changsheng Zhang

Journal of System Simulation

Abstract: This paper establishes a model for green robotic two-sided assembly line balancing problem of type-I, and a hyper-heuristic three dimensional estimation of distribution algorithm (HH3DEDA) is proposed for solving this problem. In HH3DEDA, a combinatorial encoding rule based on process selectors is designed via considering the characteristics of the problem. Then, HH3DEDA with a high and low layered structure is proposed. In the upper layer, the three-dimensional probability matrix is utilized to learn high-quality high individual block structure and its distribution information, and then the matrix is sampled to generate new high level individuals. Each high individual is …

Research On Modeling And Solution Method Of Operational Tasks Optimization, Yue Ma, Lin Wu, Yun Liu, Guangzhao Ding

Journal of System Simulation

Abstract: Aiming at the problem of tasks optimization in operation task planning, this paper defines an operational tasks graph based on property graph and influence network to describe tasks, effects and their relationship. The model of operational tasks optimization is constructed based on the operational tasks graph, and the effect network transmission algorithm and resource constraint judgment algorithm are proposed. The problem is solved by the improved differential evolution algorithm. The experimental result shows that the operational tasks graph can vividly describe the relationship between operational tasks and effects, and the model and solution method are feasible and effective.

Multi-Objective Optimization Algorithm Based On Multi-Index Elite Individual Game Mechanism, Xu Wang, Weidong Ji, Guohui Zhou, Jiahui Yang

Journal of System Simulation

Abstract: In order to improve the convergence of multi-objective optimization algorithm and the diversity of optimization solution set, and alleviate the flown down of population in target space, a multi-objective optimization algorithm based on multi-attribute elite individual game mechanism is proposed. This paper uses Pareto dominance relationship and multi-index to comprehensively screen elite individuals. The elite individual game mechanism with K-means clustering is integrated with cross and mutation strategy, which effectively improves the convergence and diversity of the algorithm. A detailed convergence analysis of the algorithm is performed to prove the convergence of the algorithm. Eight representative comparison algorithms are …

Research On Decision Behavior Modeling Method Of Key Figures, Xiao Zheng, Xiaodong Peng, Minyu Lu, Tiejun Liu

Journal of System Simulation

Abstract: The decision-making of key figures is an important factor affecting the evolution of concerned events. The research on their decision-making behavior is of great significance for the prediction of important events. For the problem of decision behavior modeling and decision propensity prediction of key figures, the character attribute and measurement methods required for character modeling are analyzed, the character decision-making process and decision-making related influencing factors are analyzed, the exploration research of decision propensity prediction method is carried out, and the prediction model of decision propensity based on comprehensive interest characteristics and psychological characteristics is constructed. Through the research …

Flexible Job-Shop Scheduling Problem Based On Improved Wolf Pack Algorithm, Chaoyang Zhang, Liping Xu, Jian Li, Yihao Zhao, Kui He

Journal of System Simulation

Abstract: An improved wolf pack algorithm is proposed for solving multi-objective scheduling optimization for flexible job shop problems. A multi-objective flexible job shop scheduling model is developed with the maximum completion time of the workpiece and the energy consumption of the machine as the optimization goals. An improved wolf pack algorithm is proposed for solving the shortcomings that traditional wolf pack algorithm is easy to fall into the local optimization. Through improving the intelligent behavior of the wolf pack algorithm, individual codes are designed from the two levels of job's process and machine, and POX(precedence operation crossover) cross operation is …

A New Electromagnetic Positioning Model With Single Coil Receiver For Virtual Interventional Surgery, Jianhui Zhao, Peijun Zhong, Zhiyong Yuan, Wenyuan Zhao, Tingbao Zhang

Journal of System Simulation

Abstract: To meet the needs of 3D positioning of guide wire catheter in interventional surgery and the requirements of smaller size sensor for narrow cerebral vessels, a new electromagnetic positioning model is proposed with single coil receiver. Based on the electromagnetic theory and geometry principle, the electromagnetic field transmitter with groups of three orthogonal coils and the single coil receiver with smaller size than existing sensors are designed. Based on Biot-Savart Law, the distance between receiving end and geometric center of orthogonal coils is calculated, and spatial coordinate of receiving end is computed based on the spherical intersection formula. To …

Calculation Of Optimal Vocs Emission Reduction Based On Improved Seirs Model In Cloud Environment, Guangqiu Huang, Xixuan Zhao, Qiuqin Lu

Journal of System Simulation

Abstract: Volatile organic compounds (VOCs) emissions in different regions are correlated and influenced. In order to minimize the impact of VOCs on the atmospheric environment and achieve synergistic governance of VOCs regions, an optimal emission reduction model is established with the maximum VOCs emission reduction as the primary goal. An improved SEIRS infectious disease dynamics optimization algorithm considering environmental pollution(SEIRS-CE) is proposed and the model is solved in cloud environment. Taking Xi'an city as an example, the SEIRS-CE algorithm is used in Ali cloud server to calculate the emission reduction of VOCs associated with 13 meteorological monitoring stations in Xi …

Neutrosophic Model To Examine The Challenges Faced By Manufacturing Businesses In Adopting Green Supply Chain Practices And To Provide Potential Solutions, Zenat Mohamed, Mahmoud M. Ismail, Amal F. Abd El-Gawad

Neutrosophic Systems with Applications

Several obstacles stand in the way of companies trying to adopt green supply-chain practices. The purpose of this research is to examine the challenges faced by the industrial industry in adopting green supply chain practices and to provide potential solutions. The information for this research was gathered via in-depth, personal conversations with manufacturing sector managers who are well-versed in green supply chain practices. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) technique was used in the evaluation phase to evaluate obstacles and assess efficient options for introducing green supply chain practices. The TOPSIS method is integrated …

Enhanced Internal Coating Structure And Light Reflectance Of Coated Papers: A Sludge Valorization Process, Bilge N. Altay, Anamika Huq, Burak Aksoy, Richard Hailstone, Muslum Demir, Cem Aydemir, Arif Karademir, Scott Williams

Articles

Paper mill sludge (PMS) is a high-volume waste of the pulppapermaking industry, containing cellulose fibers. This paper introduces cellulose nanofibers extracted from PMS (CNFsPMS) and their application in paper coatings using a wire-wound coating method to enhance internal and optical properties of paper. Three factors were investigated: (i) CNFsPMS amount, (ii) number of layers, and (iii) surface treatment via a 4 × 2 × 2 factorial design. The experimental responses were tracked by fundamentally important internal properties including porosity, air permeability, thickness, roughness, and optical properties of brightness, gloss, and CIE L*a*b* color coordination. The results showed that CNFPMS enhances …

Differentiating Axonal From Demyelinating Neuropathies Using Multiparametric Quantitative Mri Of Peripheral Nerves, Jacob D. Baraz, Stephanie Xuan, Sadaf Saba, Xue Yang, Ryan Castoro, Yang Xuan, Alison Roth, Richard D. Dortch, Jun Li, Yongsheng Chen

Medical Student Research Symposium

Objectives: To develop a multiparametric quantitative MRI (qMRI) method to track pathological changes in the peripheral neuropathies.

Background: Irrespective of the causes or types of polyneuropathies, peripheral nerves are mainly afflicted by two kinds of pathologies – axonal loss and demyelination. It is critical to differentiate between the two as treatments are different for the two conditions. While nerve conduction studies (NCS) have been used to differentiate the two pathologies in the distal nerves, there are no tools to probe the pathologies in the proximal peripheral nerves. This is particularly needed when distal nerves become non-responsive in NCS.

Methods: We …

Evaluation Of A Portable Gynecological Examination Table On Increasing Access To Cervical Cancer Screenings, Brennan Burrows, Giuliana Motta, Vibhasri Davuluri, Urvee Deo, Aman Tahir, Brindha Rajakumar, Jacob Blumenstein, Eliza Steinberg, Mariam Tobia, Asmita Tuladhar, Abigail Ahn

Medical Student Research Symposium

Introduction: Cervical cancer is a preventable disease affecting millions of women worldwide, with higher prevalence and mortality in developing countries. One explanation of this disparity is due to reduced access to screenings, especially in rural communities where mobile health clinics are limited by what medical equipment they can bring. To address these barriers, an engineering team called Project MESA (Making Examinations Safe and Accessible) designed a gynecological examination table that is portable, lightweight, and easily sanitizable.

Objective: This study aims to (1) evaluate whether the implementation of this device improves the clinician’s ability to perform pap smears as opposed to …

Nitrogen-Doped 4h Silicon Carbide Single-Crystal Electrode For Selective Electrochemical Sensing Of Dopamine, Fatemeh Fathi, Brandon Sueoka, Feng Zhao, Xiangqun Zeng

Electrical and Computer Engineering Faculty Research & Creative Works

In this work, we designed, fabricated, and characterized the first nitrogen (N)-doped single-crystalline 4H silicon carbide (4H-SiC) electrode for sensing the neurotransmitter dopamine. This N-doped 4H-SiC electrode showed good selectivity for redox reactions of dopamine in comparison with uric acid (UA), ascorbic acid (AA), and common cationic ([Ru(NH₃)₆]³⁺), anionic ([Fe(CN)₆]^3-), and organic (methylene blue) redox molecules. The mechanisms of this unique selectivity are rationalized by the unique negative Si valency and adsorption properties of the analytes on the N-doped 4H-SiC surface. Quantitative electrochemical detection of dopamine by the 4H-SiC electrode …

Projected Long-Term Climate Trends Reveal The Critical Role Of Vapor Pressure Deficit For Soybean Yields In The Us Midwest, Wenguang Sun, David Fleisher, Dennis Timlin, Chittaranjan Ray, Zhuangji Wang, Sahila Beegum, Vangimalla Reddy

Nebraska Water Center: Faculty Publications

Extreme climate events including heat waves and droughts are projected to become more frequent under future climate change conditions. However, the mechanisms between soybean yields and climate factors, specifically involving variable rainfall and high heat episodes, are still unclear, particularly with respect to spatial trends in the United States (US) Midwest. A recently modified version of the model GLYCIM was used to evaluate rainfed soybean production across 12 states at a 10 km spatial resolution for three time periods (2011–2020, 2051–2060, 2091–2099) under Representative Concentration Pathway (RCP) scenarios 4.5 and 8.5. Results showed that except for the northernmost Midwest counties, …

Comparing Self-Report Assessments And Scenario-Based Assessments Of Systems Thinking Competence, Kirsten A. Davis, Dustin Grote, Hesam Mahmoudi, Logan Perry, Navid Ghaffarzadegan, Jacob Grohs, Niyousha Hosseinichimeh, David B. Knight, Konstantinos Triantis

School of Engineering Education Faculty Publications

Self-report assessments are used frequently in higher education to assess a variety of constructs, including attitudes, opinions, knowledge, and competence. Systems thinking is an example of one competence often measured using self-report assessments where individuals answer several questions about their perceptions of their own skills, habits, or daily decisions. In this study, we define systems thinking as the ability to see the world as a complex interconnected system where different parts can influence each other, and the interrelationships determine system outcomes. An alternative, less-common, assessment approach is to measure skills directly by providing a scenario about an unstructured problem and …

Pcl And Dmso2 Composites For Bio-Scaffold Materials, Jae-Won Jang, Kyung-Eun Min, Cheolhee Kim, Chien Wern, Sung Yi

Mechanical and Materials Engineering Faculty Publications and Presentations

Polycaprolactone (PCL) has been one of the most popular biomaterials in tissue engineering due to its relatively low melting temperature, excellent thermal stability, and cost-effectiveness. However, its low cell attraction, low elastic modulus, and long-term degradation time have limited its application in a wide range of scaffold studies. Dimethyl sulfone (DMSO2) is a stable and non-hazardous organosulfur compound with low viscosity and high surface tension. PCL and DMSO2 composites may overcome the limitations of PCL as a biomaterial and tailor the properties of biocomposites. In this study, PCL and DMSO2 composites were investigated as a new bio-scaffold material to increase …

Spacecraft Orbit Determination System, Daniel M. Dombrowski, Robert A. Bettinger

AFIT Patents

The present invention relates to a resident space object orbit determination system comprising a high efficiency module for determining a resident space object's orbit and a highly efficient method for determining same. Applicants developed a method and system to determine the orbits of residence space objects including resident space objects that do not reflect energy that is directed at them and/or may be coated to minimize the ability to accurately see such resident space objects. Thus, a method, a module and a system for making such determinations that can easily and inexpensively be added to an early warning reentry system …

Development And Implementation Of Telemetry Devices To Identify And Characterize Sources Of Intraocular Pressure Variability In Rats, Christina M. Nicou

USF Tampa Graduate Theses and Dissertations

Eye health depends partially on intraocular pressure (IOP) as abnormal levels can lead to ocular tissue damage. Glaucoma is a neurodegenerative disease that affects nearly 80 million people worldwide [1]. It is associated with elevated IOP, which can lead to irreversible blindness. Relatively little is known about IOP dynamics and the physiological factors that affect it as IOP is typically monitored using tonometry. Tonometry is a common tool used by clinicians and researchers to measure IOP noninvasively. It provides a good estimate of IOP mean but not variance because data collection takes time. Readings can also be influenced by subject …

Short-Haul Airline Services In Europe And North America - A Cross-Business Model And Cross-Continental Analysis, Chunyan Yu, Richard Klophaus

Publications

We examine short-haul services offered by the respective 10 largest European and North American carriers in terms of fleet composition, network characteristics, airfare and product attributes. Our cross-business model and cross-continental analysis builds on the index approach developed by Klophaus et al. (2012) to derive a typology of the hybridization among the largest carriers in Europe and North America in short-haul markets. Our results indicate that none of the largest European and North American carriers follows the pure LCC business model in short-haul markets, and all the LCCs in Europe and North America have adopted certain degree of hybrid strategy …

Motivators And Preferences Of Route Diversion During Roadway Incidents, Grace Cole

LSU Master's Theses

When confronted with congestion and delay, drivers often divert their route. Depending on factors like purpose, urgency, destination, route alternatives, type of disruption, and mode options, common diversionary options can range from changing departure time, route, and mode to canceling a trip altogether. One of the foundational building blocks of travel forecasting is traffic assignment, which is used to distribute trips over a network using complex algorithms to aggregately represent the desire of drivers to minimize travel time.

While these assignment models are backed by decades of research and observational experience, they are also limited by the fact that they …

Evolution And Enlightenment Of Us-Japan “Advanced Storage Research Consortium”, Sumei Wang

Bulletin of Chinese Academy of Sciences (Chinese Version)

In the process of comprehensively promoting Chinese-style modernization, we must adhere to scientific and technological selfreliance and self-improvement as the strategic support for national development, and scientific and technological innovation is the main driving force for high-quality economic development. As one of the carriers, the innovation consortium formed by enterprises as main entities aims to realize the deep integration of innovation chain and industrial chain, accelerating the transformation of scientific and technological achievements into real productivity, and solving the problem of disconnection between scientific research activities and industrial demand. On the basis of reviewing and summarizing the evolution of the …

Port-Of-Entry Simulation Model For Potential Wait Time Reduction And Air Quality Improvement: A Case Study At The Gateway International Bridge In Brownsville, Texas, Usa, Benjamin Stewart, Hiram Moya, Amit U. Raysoni, Esmeralda Mendez, Matthew Vechione

Civil Engineering Faculty Publications and Presentations

The mathematical study known as queueing theory has recently become a major point of interest for many government agencies and private companies for increasing efficiency. One such application is vehicle queueing at an international port-of-entry (POE). When queueing, fumes from idling vehicles negatively affect the overall health and well-being of the community, especially the U.S. Customs and Border Protection (CBP) agents that work at the POEs. As such, there is a need to analyze and optimize the border crossing queuing operations to minimize wait times and number of vehicles in the queue and, thus, reduce the vehicle emissions. For this …

Port-Of-Entry Simulation Model For Potential Wait Time Reduction And Air Quality Improvement: A Case Study At The Gateway International Bridge In Brownsville, Texas, Usa, Benjamin Stewart, Hiram Moya, Amit U. Raysoni, Esmeralda Mendez, Matthew Vechione

School of Earth, Environmental, & Marine Sciences Faculty Publications

The mathematical study known as queueing theory has recently become a major point of interest for many government agencies and private companies for increasing efficiency. One such application is vehicle queueing at an international port-of-entry (POE). When queueing, fumes from idling vehicles negatively affect the overall health and well-being of the community, especially the U.S. Customs and Border Protection (CBP) agents that work at the POEs. As such, there is a need to analyze and optimize the border crossing queuing operations to minimize wait times and number of vehicles in the queue and, thus, reduce the vehicle emissions. For this …

Implementing Commercial Inverse Design Tools For Compact, Phase-Encoded, Plasmonic Digital Logic Devices, Michael Efseaff, Kyle Wynne, Krishna Narayan, Mark C. Harrison

Engineering Faculty Articles and Research

Numerical simulations have become an essential design tool in the field of photonics, especially for nanophotonics. In particular, 3D finite-difference-time-domain (FDTD) simulations are popular for their powerful design capabilities. Increasingly, researchers are developing or using inverse design tools to improve device footprints and performance. These tools often make use of 3D FDTD simulations and the adjoint optimization method. We implement a commercial inverse design tool with these features for several plasmonic devices that push the boundaries of the tool. We design a logic gate with complex design requirements as well as a y-splitter and waveguide crossing. With minimal code changes, …