Engineering Commons^™

Review Of Magnetic Properties And Texture Evolution In Non-Oriented Electrical Steels, Yizhou Du, Ronald J. O'Malley, Mario F. Buchely

Materials Science and Engineering Faculty Research & Creative Works

Electrical steels can be classified into two groups: grain-oriented (GO) and non-oriented (NGO) electrical steel. NGO electrical steels are mainly considered as core materials for different devices, such as electric motors, generators, and rotating machines. The magnetic properties and texture evolution of NGO electrical steels depend on multiple factors (such as chemical content, heat-treatment, and rolling process) making the development of new products a complex task. In this review, studies on the magnetic properties of NGO electrical steels and the corresponding texture evolution are summarized. The results indicate that further research is required for NGO electrical steels to ensure high …

A Hyperbaric Aerodynamic Levitator For Containerless Materials Research, Sydney E. Boland, Stephen K. Wilke, Jonathan A. Scott, Sarah M. Schlossberg, Alex Ivaschenko, Richard J.K. Weber, David W. Lipke

Materials Science and Engineering Faculty Research & Creative Works

A hyperbaric aerodynamic levitator has been developed for containerless materials research at specimen temperatures exceeding 2000 °C and pressures up to 10.3 MPa (1500 psi). This report describes the prototype instrument design and observations of the influence of specimen size, density, pressure, and flow rate on levitation behavior. The effect of pressure on heat transfer was also assessed by studying the heating and cooling behavior of levitated Al2O3 liquids. A threefold increase in the convective heat transfer coefficient was estimated as pressure increased to 10.3 MPa. The results demonstrate that hyperbaric aerodynamic levitation is a promising technique for containerless materials …

Personal Protective Equipment Usage And Injury Type, Nathan Giannini

Construction Management

Workers in the construction industry have many injuries both minor and life-altering. The industry suffers from injuries of all kinds such as falls, electrocution, and being struck by flying objects. To protect against this, workers wear certain types of personal protective equipment (PPE) on construction sites as a last line of defense. The equipment available such as hard hats, safety glasses, gloves, respirators, and hearing protection either protects against acute injuries (those that occur instantly) or chronic injuries (those that occur over time). This study investigates whether the type of injury that PPE protects against, acute or chronic, affects the …

Designing A Work-Life Balance Learning Module For Cal Poly Construction Management Department, Alex Jones

Construction Management

The construction industry is known to create a highly stressful work environment given its unpredictability and mental/time demanding nature, which creates challenges for professionals to maintain a healthy work-life balance. This senior project aims to research and identify the key areas that foster this stress and propose a learning module for the Cal Poly Construction Management Department to implement into class curriculum. Having this learning module taught to students will raise awareness of the topic for future industry professionals and equip them with the tools to maintain a healthy equilibrium between their work demands and personal life. The learning module …

Electric Vehicle Routing Problem – Models And Algorithms, Hesamoddin Tahami

Engineering Management & Systems Engineering Theses & Dissertations

The transportation sector is a major greenhouse gas emitter that is heavily regulated to reduce its dependence on oil. These regulations along with the growing customer awareness of global warming have led to the investigation of new transportation problems that consider using eco-friendly vehicle fleets. Promising alternatives to traditional fleets include alternative fuel vehicles (AFVs) and electric vehicles (EVs). These twenty-first-century vehicles offer an appealing advantage of consistently reducing their environmental impact, but due to the current technology, they exhibit bothersome limitations. The short driving range along with limited charging infrastructure may consequently cause issues related to range anxiety, i.e., …

Opensim-Based Musculoskeletal Modeling: Foundation For Interactive Obstetric Simulator, Bahador Dodge

Electrical & Computer Engineering Theses & Dissertations

The use of mathematical and computational models to understand complex biological systems, such as the human birth process, is a rapidly growing field in medicine. These models can be used to optimize and personalize medical treatments for individual patients, enhance training, and aid in educational efforts. While recent advancements in healthcare, particularly in obstetrics, have improved care for mothers and babies, studies and government reports indicate a rising rate of maternal mortality in the United States.

Despite this rising trend, there is a lack of detailed studies concerning the use of modeling and simulation to develop an interactive obstetrics simulator …

Sealion Cubesat Mission Architecture Using Model Based Systems Engineering With A Docs As Code Approach, Kevin Yi-Tzu Chiu

Mechanical & Aerospace Engineering Theses & Dissertations

CubeSats are a growing population within the space industry. Every year, universities launch numerous amounts of CubeSats due to their inexpensive cost of development, launch, and deployment. However, this comes with numerous challenges. As the number of university-CubeSats grow, so too do the numbers that fail. With development teams consisting mainly of students with little to no training, proper and yet easy to use tools or methods should be implemented to help ensure mission success. Especially in the critical stages of planning before and during development, a technical approach to quickly track life cycle development of a CubeSat is needed. …

Detection Of Toxic Aldehydes In Aerosols Of Electronic Cigarettes., Ellie Bess Reed

Electronic Theses and Dissertations

Over the past decade, use of electronic cigarettes (e-cigarettes) has increased in the younger generations of the United States. With the broad range of flavors and devices distributed on the market, American youth are prime marketing targets for the e-cigarette industry. To create a more regulated market, research of this thesis has been conducted on newer generations of e-cigarette “MOD” devices to examine how e-cigarette battery power output and coil temperature, concentrations of propylene glycol and vegetable glycerin, added flavorings (strawberry, mango, and menthol), and the presence of nicotine affect generation of aerosol particles and aldehydes in aerosols emitted by …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

An Approach For Verification Of Traffic Speed Deflectometer Measurements, Mahsa Beizaei

Open Access Theses & Dissertations

Recent research studies have shown the usefulness and applicability of Traffic Speed Deflectometers (TSD) in support of the network-level pavement management process. There are, however, no accepted procedures for verification and validation of the TSD measurements to be utilized by practitioners. To address this need, TSD measurements may be verified with the data obtained by widely accepted road-testing equipment, Falling Weight Deflectometer (FWD). In this study, TSD and FWD operations on pavement sections were simulated employing the finite layer approach which resulted in the development of a comprehensive database of pavement responses. Using the established numerical simulation database, theoretical relationships …

A Multiple Model Approach To Bridge Deterioration Modeling, Jin A. Collins

Open Access Theses & Dissertations

Bridge Management Systems (BMSs) have been used to support decision-making in bridgeprojects, including maintenance, rehabilitation, and replacement under financial constraints. These decisions are predicated on the ability to estimate bridgesâ?? future condition states to optimize bridge network systems' performance. Deterioration models are commonly used tools to help transportation agencies make predictions of future condition states of infrastructure facilities, schedule capital investments, and make comparative decisions. Numerous deterioration models have been developed over the last few decades. In particular, Markov chain models utilize bridge data collected from the National Bridge Inventory (NBI) database to make predictions. The accuracy of predictions is …

Development Of A Cost-Constrained Intelligent Prosthetic Knee With Real-Time Machine Learning, Predictive Stumble Control, Lucas Jonathan Galey

Open Access Theses & Dissertations

The field of biomechatronics is evolving quickly with advances in computer science, biology, and electrical and mechanical engineering. Coupled with increased interests in machine learning (ML) across all industry sectors, there are opportunities to leverage advanced analytics in uniquely complex problems. This study aimed to deploy real-time ML predictions in a novel microprocessor-controlled prosthetic knee (MPK) device capable of identifying and responding to stumble-events to reduce amputee fall prevalence. Innately, stumbling is a chaotic event. Current MPKs operate by detecting gait characteristics and reacting to preprogrammed states. While these systems are beneficial in significant ways, such as energy expenditure and …

Thermal Behavior Of Plain And Fiber-Reinforced Rigid Concrete Airfield Runways, Arash Karimi Pour

Open Access Theses & Dissertations

The environmental condition and temperature gradient are important factors resulting in concrete airfield runways cracking during the time. Rigid concrete airfield runways experience different thermal gradients during the day and night due to changes in air temperature. Curling and thermal expansion stresses are the main consequences resulting in various types of cracking over the surface and thickness of concrete airfield runways and increasing maintenance costs. The curvature of concrete slabs increases with an increase in the temperature gradient which is amplified when runways open to traffic. Additionally, the combination of the curling and shrinkage stresses, in rare circumstances, can be …

Heat Transfer Of A 1n Thruster In A 2.5u Cubesat Module, Javier Madrid

Open Access Theses & Dissertations

With the aerospace industry expanding and moving forward with more ambitious missions, small satellites such as CubeSats have proven to be at the forefront of innovation for research satellites. This innovation have introduced complications which if gone unattended can lead to the loss of the satellite; one such complication coming in the form of propulsion heat transfer. This paper presents an investigation into the propagation of heat transfer within a 2.5 CubeSat module when a 1N thruster is fired inside it. This is done by leveraging the equation of heat transfer and comparing results to those simulated by ANSYS. Not …

Entropy Aided Rf-Dna Fingerprint Learning From Gabor-Based Images, Mohamed Alfatih Taha

Masters Theses and Doctoral Dissertations

The number of devices connected to the internet have been increasing and shape Internet of Things (IoT). The security of IoT is an issue due to the use of weak or no encryption. Specific Emitter Identification (SEI) was introduced to overcome this issue by introduce RF-DNA fingerprinting exploring the PHY layer features. Recently, The SEI performance improved by the usage of the signal’s Time Frequency (TF) representation and accelerated using the Deep learning (DL) Convolutional Neural Network (CNN). While the classification accuracy has been improved from using raw signals learning the amount of data generated is large and computationally expensive. …

Smartphone Video Guidance Sensor In High-Altitude Uav Precision Landing, Joao Leonardo Silva Cotta

Theses and Dissertations

The Smartphone Video Guidance Sensor (SVGS) is an emerging technology developed by NASA Marshall Space Flight Center that uses a vision-based approach to accurately estimate the six-state position and orientation vectors of an illuminated target of known dimensions with respect to a coordinate frame fixed to the camera. SVGS is a software-based sensor that can be deployed using a host platform’s resources (CPU and camera) for proximity operations and formation flight of drones or spacecraft. The SVGS output is calculated based on photogrammetric analysis of the light blobs in each image; its accuracy in linear and angular motion at different …

Development Of Design Method For Fiber Reinforced Slab On Ground, Abdullah Albogami

Theses and Dissertations

All the present methods of designing the slab-on-ground (SOG) are based on the flexural slab capacity (FSC) to determine the required thickness by calculating the modulus of rupture (MOR) of the concrete beam, depending on ASTM C78 or AASHTO T 97 specifications. All previous experimental results have confirmed that the MOR is much lower than the FSC and it cannot be used to predict FSC accurately. Hence, using the MOR to predict the FSC would lead to the underestimation of FSC and require more unnecessary thickness. Therefore, this study aims to develop accurate equation for estimating the FSC based on …

Electrical Characterization Of Cementitious Composites, Abbas Ali

Theses and Dissertations

Multifunctional concrete using electrical conductivity gains attention for various nonstructural applications. Particularly, conductive concrete enables monitoring internal damages in concrete, which has been impossible by conventional nondestructive methods. On the other hand, most of on-going investigations on multifunctional concrete uses conductive additives to impart electrical conductivity into concrete, but this limits the multifunctional application to predesigned structures. Finding multifunctionality embedded in conventional concrete can open various possibilities for smart concrete. Aiming to finding the feasibility of using conventional concrete for multifunctional application, this study investigates the electrical properties of plain cementitious composites including cement paste, mortar, and concrete, but not …

Characterization Of Lower Rio Grande Valley Watershed, Abdulkabir O. Aduragba

Theses and Dissertations

The Lower Laguna Madre (LLM) is considered impaired because of the high concentration of bacteria and low level of dissolved oxygen (DO). LLM receives freshwater from the Lower Rio Grande Valley (LRGV) watershed. In other to understand the impairment, LRGV watershed is being studied by relying on water quality data of the contributing drainages and State resource geographic data to identify watershed boundary and pollutant sources.

The study on the North and Central LRGV watershed shows some correlation between the concentration of E. coli/Bacteria, Ammonia, Total Kjeldahl Nitrogen, Total Phosphorus, Nitrate and Nitrite, Chlorophyll-a and the sources of pollutant in …

Formation Control Of Multiple Quadrotors, Miguel Alejandro Garcia

Theses and Dissertations

This thesis studies formation control of multiple quadrotors under different conditions. Two controller design approaches are proposed. In the first approach, it is assumed that the dynamics of each quadrotor is unknown and there is disturbance. With the aid of distributed estimation and the universal approximation property of neural networks, distributed tracking controllers are proposed. Simulation shows the effectiveness of the proposed controllers. In the second approach, it is assumed that the inertia parameters are unknown. With the aid of distributed estimation, online data estimation, and optimal control theory, distributed sub-optimal tracking controllers are proposed. Simulation results show the effectiveness …

Graphene-Conductive Ink Coated Laser Engraved Kapton Electrochemical Biosensor For The Detection Of Dopamine And Immune Sensing, Dipannita Ghosh

Theses and Dissertations

Novel and flexible disposable laser-engraved Kapton (LEK) electrodes modified with graphene conductive inks have been developed for dopamine and Interleukin-6 (IL-6) detection. The LEK sensors exhibit high reproducibility (RSD=0.76%, N=5) and stability (RSD=4.39%, N=15)after multiple bendings, and thus make the sensors ideal for wearable and stretchable bioelectronics applications. We have developed graphene conductive ink- PEDOT:PSS (G-PEDOT:PSS) and polyaniline (G-PANI) based electrode coatings for working electrode modification to improve the sensitivity (41.41 times higher for screen printed electrode with G-PEDPT:PSS ink modification),and limit of detection (LOD) . We have further compared the performance of the fabricated electrodes with commercially available screen-printed …

Developing Executable Digital Models With Model-Based Systems Engineering – An Unmanned Aerial Vehicle Surveillance Scenario Example, Viviana Guadalupe Lopez

Theses and Dissertations

There is an increase in complexity in modern systems that causes inconsistencies in the iterative exchange loops of the system design process and in turn, demands greater quality of system organization and optimization techniques. A recent transition from document-centric systems engineering to Model-Based Systems Engineering (MBSE) is being documented in literature from various industries to address these issues. This study aims to investigate how MBSE can be used as a starting point in developing digital twins (DT). Specifically, the adoption of MBSE for realizing DT has been investigated, resulting in various literature reviews that indicate the most prevalent methodologies and …

Monitoring Of Ac Motors Parameters Using Industrial Internet Of Things, Mohammad Muheisen

Theses and Dissertations

In this thesis, the industrial internet of things has been introduced, as a very newborn research field. The suggested prototype has been assembled at the university laboratory to simulate the system conditions. Two three-phase induction motors have been utilized to perform this study, to monitor and gather data, regarding vibration and temperature. As a very newborn field, the data collected from the two motors can be analyzed to achieve a couple of goals, in energy consumption, to reduce the financial burden of the remedy works. A fast Fourier transformer has been applied to measure the motor's vibrations, and the current …

Wave Excited Mass-Spring-Damper System For A Self-Recharging Autonomous Underwater Vehicle, Mahmodul Hasan Maheen

Theses and Dissertations

Autonomous underwater vehicles' (AUVs) endurance is constrained by the lifetime of their batteries and the distance that tether wires can traverse. Solving the endurance problem of AUV using the enormous potential of ocean wave energy is the motivation behind this thesis. The objective of this research is to model a mass-spring-damper system to emulate the permanent magnet linear generator (PMLG) of a self-recharging AUV and identify its energy absorption capability through numerical simulation and experimental testing. The research activities started with modeling and fabricating a 1:5 scale model. The scaling was done by comparing the most common AUV size of …

Building Services Engineering May/June 2023

Building Services Engineering

No abstract provided.

Advanced Cmos Process For Submicron Silicon Carbide (Sic) Device, Niloy Saha

Graduate Theses and Dissertations

Silicon carbide (SiC) is a wide semiconductor material with superior material properties compared to other rival materials. Due to its fewer dislocation defects than gallium nitride and its ability to form native oxides, this material possesses an advantage among wide band gap materials. Despite having several superior properties its low voltage application is less explored. CMOS is extremely important in low voltage areas and silicon is the dominant player in it for the last 50 years where scaling has contributed a major role in this flourishment. The channel length of silicon devices has reached 3 nm whereas SiC is still …

The Effects Of Carbon Coating On The Electrochemical Performance Of Metal-Oxide Short Fiber Anodes For Lithium-Ion Batteries, David A. Sanchez

Theses and Dissertations

This thesis focuses on the process of oxidizing centrifugally spun precursor fibers and the subsequent process of carbon coating via chemical vapor deposition (CVD) for use as anode material in lithium-ion batteries (LIBs). Metal oxides have been studied as a potential replacement for graphite as they have been shown to have high theoretical capacities, good electronic conductivity, and can be synthesized using low-cost, scalable methods. However, metal oxides with high theoretical capacities also have low cycle life. To avoid this, metal oxides have been integrated with carbon to expand their life cycle. The work in this thesis shows the synthesis …

Geospatial Analysis Based On Hurricane Storm Surge Scenarios On Coastal South Texas And North Mexico, Layda Belia Spor Leal

Theses and Dissertations

The coastal area of the Lower Rio Grande Valley, Texas, and Northern Tamaulipas, Mexico, has historically faced a variety of natural disasters involving flooding hazards, such as hurricanes and tropical storms. These scenarios not only represent imminent danger for the population in the area but can lead to long term effects on the infrastructure located in the impact zone. As such, it is imperative to conduct analysis on not only the specific areas that will be affected, but the severity of flooding that can result after a catastrophic event. Modelling work that simulates the storm surge in case of various …

2023 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2023.

Heat Transfer In Microchannel Compact Heat Exchanger, Mohammed Al-Khateri

Theses

This study aims to investigate heat transfer in a miniaturized channel heat exchanger and effectiveness for given real-life design. The main objective of the study is to develop and build a high-performance heat exchanger for thermal management in automotive application using typical radiator manufacturing techniques. This research uses experimental and model-based investigation. It conceptualizes the Miniaturized Channel Heat Exchangers (MCHX) model-based study for demonstrating the design of miniaturized channel heat exchangers, manufacture, and study the heat exchanger effectiveness by validating the developed mathematical model experimentally. The proposed design of the MCHX is to use extruded tubes containing miniaturized channels as …