Engineering Commons^™

Noise-Resilient And Adaptive Distributed Control Techniques For Microgrids, Seyed Iman Habibi

Electrical and Computer Engineering ETDs

This dissertation focuses on addressing the critical tasks of secondary control in microgrids, particularly in the islanding operating mode. The presence of noise in sensors and communication links necessitates the design of a noise-resilient secondary control approach. In response, this dissertation introduces the Nonlinear Generalized Minimum Variance (NGMV) control approach into the islanded AC and DC microgrid's secondary control system. The effectiveness of the proposed approach is demonstrated through MATLAB simulations. Additionally, the dissertation presents an adaptive, model-free, and data-driven control approach for secondary voltage control in AC microgrids, addressing uncertainties. By employing Unfalsified Adaptive Control (UAC), the approach selects …

Performance And Emissions Study Of N+3 And N+4 Engine Models With Several Fuel Types Using Npss, Abel Solomon

McKelvey School of Engineering Graduate Student Theses & Dissertations

The aviation industry is known to be one of the major contributors to greenhouse gases accounting for 4.9% of the global greenhouse emissions. With the ever-increasing threat of climate change to the overall survival of the planet, the exploration of new technologies and alternative energy sources that minimize greenhouse gas emissions are of paramount importance. In this regard, the development of propulsion systems well suited for the performance and emissions requirements of future commercial aircraft plays a crucial role. This thesis investigates N+3 and N+4 technology-level propulsion systems that are proposed by NASA as possible propulsion systems for advanced single-aisle …

Impact Of Granular Activated Carbon On In-Situ Reductive Dechlorination Of Chlorinated Solvents, Reagan Gregory

All Theses

Treatment of chlorinated solvent-contaminated aquifers with in-situ activated carbon offers a simple yet cost-effective treatment opportunity, yet the interactions between activated carbon and the chlorinated solvents and their daughter products are not well understood.

The objective of this research is to demonstrate the impacts of in situ activated carbon on complete reductive dechlorination of chlorinated solvents in contaminated aquifer material with mixed dehalogenating cultures. This research seeks to characterize the sorption of trichloroethene and its daughter products cis-dichloroethene, vinyl chloride, and ethene to granular activated carbon and how that sorption relates to the removal of trichloroethene from contaminated material in …

Design Of Microwave Superconducting Resonators For Materials Characterization, Xinyi Zhao

McKelvey School of Engineering Graduate Student Theses & Dissertations

A resonator is a specialized device capable of storing and transferring energy at precise frequencies. Resonators find widespread use in various fields, such as electrical engineering, physics, and material science, owing to their exceptional ability to accurately measure, filter, and amplify signals. Different types of resonators exist, but coplanar waveguide (CPW) and coupled coplanar waveguide (CCPW) resonators are popular due to their high-frequency operation and easy integration into microfabrication processes.

Tandem Peptides Targeting Her2 For Delivery Of Cd44 Sirna Into Her2+ Breast Cancer Cells In Vitro, James Kalogeros

All Theses

More than 300,000 women will be diagnosed with breast cancer, and approximately 48,000 women will die this year due to the disease in the United States. HER2+ breast cancer accounts for 20-25% of invasive breast cancer, and it has a worse prognosis and higher early-stage mortality rate than other breast cancer subtypes. Common treatments for HER2+ breast cancer involve surgical removal of the breast or systemic therapy with chemotherapeutic drugs, both of which cause damage to healthy tissue. Due to the lack of a natural ligand for the HER2 receptor, there is a need for improved targeting strategies for the …

Vibration Fatigue Of Leaded Solder Joint Interconnects For Pcb Electronics, John Crowder

All Theses

With the increasing prevalence of electronic equipment worldwide, there is also a decrease in the size of the components on their printed circuit boards (PCBs), leading to an increase in the density of these components. A significant amount of failure in electronic equipment is vibration fatigue of solder joints and their attachments. However, the complexity of these PCBs and their components has made finite element modeling (FEM) more complex, adding considerable time to create and analyze a model.

This paper aims to provide a literature review for the vibration fatigue of leaded solder components, create a test setup, and validate …

Digital Twins And Artificial Intelligence For Applications In Electric Power Distribution Systems, Deborah George

All Theses

As modern electric power distribution systems (MEPDS) continue to grow in complexity, largely due to the ever-increasing penetration of Distributed Energy Resources (DERs), particularly solar photovoltaics (PVs) at the distribution level, there is a need to facilitate advanced operational and management tasks in the system driven by this complexity, especially in systems with high renewable penetration dependent on complex weather phenomena.

Digital twins (DTs), or virtual replicas of the system and its assets, enhanced with AI paradigms can add enormous value to tasks performed by regulators, distribution system operators and energy market analysts, thereby providing cognition to the system. DTs …

Glass Bubbles Grafted With Polymer Brushes For Liquid Hydrocarbon Fire Extinguishment, Randall Snipes

All Dissertations

The current most efficient solution to fighting liquid pool fires involves the use of firefighting foams containing fluorinated surfactants. The physiochemical properties of these foams are considerably different to all other currently available firefighting foams. Fluorinated surfactants lower the surface tension to a point where the foam solution draining from the foam structure forms a continuous aqueous film on the surface of a volatile hydrocarbon fuel, adding an additional barrier to fuel vapor diffusion to the burning fire. For this reason, these foams qualify as aqueous film forming foams (AFFFs). However, fluorinated compounds are extremely harmful for the environment due …

Visualizing Transaction-Level Modeling Simulations Of Deep Neural Networks, Nataniel Farzan, Emad Arasteh

Engineering Technical Reports

The growing complexity of data-intensive software demands constant innovation in computer hardware design. Performance is a critical factor in rapidly evolving applications such as artificial intelligence (AI). Transaction-level modeling (TLM) is a valuable technique used to represent hardware and software behavior in a simulated environment. However, extracting actionable insights from TLM simulations is not a trivial task. We present Netmemvisual, an interactive, cross-platform visualization tool for exposing memory bottlenecks in TLM simulations. We demonstrate how Netmemvisual helps system designers rapidly analyze complex TLM simulations to find memory contention. We describe the project’s current features, experimental results with two state-of-the-art deep …

Life Cycle Energy Assesment Of Advanced Fiber Reinforced Composite Design And Manufacturing Methodologies, Urjit Lad

All Theses

Automotive industry at large is focused on vehicle light-weighting since a 6%-8% increase in fuel efficiency can be achieved with a 10% reduction in vehicle weight [1]. With the growing demand for cost-effective and sustainable light weighting of automobile structures, interest has increased in the application of fiber reinforced plastic (FRP) composites for use in the Body-in-White (BiW), which can account for up to 40% of the total vehicle weight. Traditional FRP composite manufacturing processes like vacuum assisted resin transfer molding, autoclave consolidation or use of automated fiber placement have been successfully used for marine and aerospace applications. However, these …

Virtual Prototyping And Validation For Autonomous Assistive Mobility, Amogh Venkataramana Reddy

All Theses

Physical disability in humans is something that no one has control over. It is catastrophic for people to experience it, and sometimes hinders them from enjoying the essence of life. Though disability is something people have no control over, they do have control on how they can go forward and make life beautiful and meaningful. Wheelchairs have helped people with disabilities in mobility, allowing them to move around with the help of others or sometimes on their own. This research will focus on development of an autonomous assistive mobility robot to help the disabled using virtual prototyping tools for development …

Understanding The Role Of Interactivity And Explanation In Adaptive Experiences, Lijie Guo

All Dissertations

Adaptive experiences have been an active area of research in the past few decades, accompanied by advances in technology such as machine learning and artificial intelligence. Whether the currently ongoing research on adaptive experiences has focused on personalization algorithms, explainability, user engagement, or privacy and security, there is growing interest and resources in developing and improving these research focuses. Even though the research on adaptive experiences has been dynamic and rapidly evolving, achieving a high level of user engagement in adaptive experiences remains a challenge. %????? This dissertation aims to uncover ways to engage users in adaptive experiences by incorporating …

Increasing The Safety Of Bicyclists Using A Cyclist Behavior Questionnaire And A Smartphone Based Application, Anika Jannat Rimu

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

ABSTRACT: Bicycling is beneficial for health, the environment, road users’ flexibility, and personal expenses. Compared to motor vehicles, they are an active mode of transport, cause minimum pollution, are affordable, and can easily navigate through the increasing traffic all over the world. This increase in traffic, however, also increases the possibility of crashes with motor vehicles. Bicyclists, being more exposed to traffic than drivers, suffer fatal consequences from a crash. Therefore, a standard tool is required to understand bicyclist behavior on the road. This tool can provide insights into bicyclists’ behavior so that appropriate infrastructure or policy changes can be …

Computational Comparison Of Medializing Tibial Tubercle Osteotomy And Trochleoplasty In Patients With Trochlear Dysplasia, Clare K. Fitzpatrick, Robert N. Steensen, Oliver Alvarez, Amy E. Holcomb, Paul J. Rullkoetter

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Medial patellofemoral ligament reconstruction (MPFLR) has emerged as the procedure of choice for recurrent patellar dislocation. This addresses soft tissue injury but does not address underlying anatomic factors, including trochlear dysplasia, that are commonly present and increase risk of dislocation. Quantification of the stability offered by other surgical interventions, namely, medializing tibial tubercle osteotomy (mTTO) and trochleoplasty, with and without MPFLR, may provide insight for surgical choices in patients with trochlear dysplasia. We developed subject-specific finite element models based on magnetic resonance scans from a cohort of 20 patients with trochlear dysplasia and recurrent patellar dislocation. The objectives of this …

Investigation Of Issues Concerning Wellbore Leakage, Ishtiaque Anwar

Civil Engineering ETDs

A range of applications, such as subsurface fluid storage facilities, geothermal wells, and CO2 storage wells, are concerned about leakage along wellbores. The research described in this dissertation was largely directed toward wellbore leakage concerns for the US Strategic Petroleum Reserve (SPR). For SPR wellbores, multiple fluids are likely to exist in fractures and flow paths associated with leaky wellbores, including liquids (e.g., liquid hydrocarbon - crude oil) and gases (e.g., gas ex-solved from liquid and/or nitrogen from MIT tests). Anomalous pressure records have been observed at the wellhead of SPR wellbores, indicative of wellbore leakage. In a few cases, …

Repair Of A Wellbore Microannulus, Serafin Garcia Fernandez

Civil Engineering ETDs

In wellbore systems, the microannulus between the steel and the cement has been shown to be a critical leakage pathway. This microannulus offers unique roughness, aperture distribution, and wetting conditions, which are critical in understanding and explaining the potential sealing efficiency of a repair material. An experimental configuration was developed to better understand how a repair material would displace an existing material in the microannulus, visually evaluate potential instabilities on the flow patterns developed, and how efficient the potential repair would be. For that purpose, the experimental configuration consisted of a planar, rough cement surface and a transparent acrylic plate …

Experimental And Numerical Investigation Of Fluid Flow Behavior Through Fractured Wellbore Cement, Mahya Hatambeigi

Civil Engineering ETDs

Leakage from wellbores has been a major challenge in the energy industry, leading to groundwater contamination, reduced productivity, safety hazards, and increased operating costs. Cemented annulus fractures are a common type of leakage pathway in wellbores that can form due to various physical and chemical conditions. The number of wellbore leaks continues to increase globally, making it imperative to develop a better understanding of the complex mechanisms governing fluid flow through fractured wellbore cement. Understanding the behavior of fluid flow through a leaky cemented annulus is crucial for evaluating the leakage potential and risk assessments in wellbore systems, as well …

Prevention And Reversal Of Elastin-Associated And Phosphate-Dependent Arterial Calcification Using Targeted Nanotherapeutics In Pre-Clinical Models, Fatema Tuj Zohora

All Dissertations

Vascular calcification can be life-threatening, involving calcium phosphate crystal deposits in the blood vessels. The calcification in the intimal layer of the arterial wall is usually associated with atherosclerotic plaque build-up that, in the advanced stage, harbors ‘dispersed’ and ‘spotty’ deposits of calcium phosphate crystals in the necrotic core of the plaque. In contrast, medial arterial calcification (MAC) can form independently of atherosclerosis and appears as ‘Railroad-like’ calcific deposits along degraded elastin lamellae in the medial layer of arteries. The mechanisms of such elastin-associated medial arterial calcification and potential therapies are the key concerns of this dissertation. MAC is common …

Development Of Mass Transfer Coefficient Correlations Between Carbon Dioxide And Oxygen For Air-Lift Devices, John Walker

All Theses

An experimental method for measurement and determination of carbon dioxide volumetric mass transfer coefficients (k_La) in high pH water was developed. The goal of this research was to develop a relationship between CO₂ and O₂ volumetric mass transfer coefficients for accurate k_La values in order to meet the needs of carbon capture systems and other industries. Results included dissolved oxygen (DO) and total inorganic carbon (TIC) k_La comparisons, as well as polarographic DO (mg/L) and galvanic DO (mV) k_La correlation. CO₂ k_La estimation based on O_{2 …}

Developing An Early Warning System Of Highway Slope Failure Based On In-Situ Hydraulic Conductivity Of Soil, Alinda Gupta

Civil Engineering Dissertations - Archive

Highway slope failure is globally a momentous issue. Highway slope failure poses a significant issue in transportation infrastructure. Several factors can contribute to slope failures, including geological conditions, weather events, and human activities. Weather events like heavy rainfall, cyclic shrinkage and swelling can trigger slope failures constructed on high plastic clays. It increases pore water pressure, causing soil saturation, and inducing failure. The consequences of highway slope failures are severe, ranging from traffic disruptions, road closures, and damage to vehicles and infrastructure, to potential injuries or loss of lives. Addressing and mitigating slope failure risks is crucial for ensuring the …

Evaluation Of A First Flush System With Multiple In-Line Bypassing Fuel Separator Components In The Industrial Area Of An Airport, Kazi Rashid

Civil Engineering Dissertations - Archive

ABSTRACT: This dissertation explores the effectiveness of a complex system employed to capture the first flush (FF) generated from industrial activities occurring at an airport. The First Flush System (FFS) utilized by the DFW International Airport is comprised of multiple in-line bypassing fuel separators and located in many parts of the Air Operations Area (AoA) of the airport as well as maintenance areas. The system collects and conveys a portion of the rainfall runoff generated from the drainage areas of the industrial land-use portion of the DFW airport to a Stormwater Pre-treatment Plant (SWPTP) and then to Trinity River Authority …

Exploring Spatial Associations And Complex Interactions Between Geotechnical Properties And Electrical Resistivity Values In Clayey Soils, Mina Zamanian

Civil Engineering Dissertations - Archive

ABSTRACT: A successful design and construction of infrastructure systems such as highways and bridges highly depend on accurate estimation of geotechnical properties and understanding their spatial distributions, especially in reliability-based designs such as the load and resistance factor design (LRFD) method. Insufficient and inaccurate subsurface information has a major contribution to cost overruns and delays in up to 50% of all infrastructure projects. Insufficient site investigation may also contribute to inadequate or conservative designs, leading to costly failures or increased project costs. Hence, geophysical methods, such as electrical resistivity imaging, that can potentially transform the existing subsurface investigations are used …

Influence Of Swirl And Turbulence In The Particle Removal Using Fog In A Pipe Flow, Nisarg T. Patel

All Theses

Fog-and-tube scrubbers are employed to remove harmful ultrafine aerosols, such as Diesel particulate matter (DPM), from an airflow. The underlying principle of this removal process involves enlarging the aerosol particles by coagulating them with fog drops, which are subsequently eliminated through inertial impaction onto the tube wall. Previous research conducted by Tabor et al. (2021) demonstrated an increase in scavenging of ultrafine DPM particles, ranging from 11.5 nm to 154 nm, by as large as 45% over the no fog case. This finding is crucial in addressing the challenges associated with conventional filtration methods for capturing ultrafine particles.

The present …

The Impact Of Improper Solid Waste Management On Public Health Of African Cities. The Case Of Addis Ababa City, Ethiopia., Tesfaye Abebe Alemu

Civil Engineering Dissertations - Archive

Many African cities are generating an ever-increasing amount of waste and the effectiveness of their solid waste collection and disposal systems is currently declining. Therefore, research has been striving to develop a sustainable and integrated solid waste management system that fits the current challenges facing the local environment. The objective of this study is to analyze the impact of improper solid waste management that affects the air and water quality of the near Koshe open dump site and around the Addis Ababa City, and their adverse effect on the public health living around them. The rapid increase of population in …

The Road Map For Sustainable Waste Management In The Federal Democratic Republic Of Ethiopia, Assegid Yimenu

Civil Engineering Dissertations - Archive

Solid Waste Management (SWM) is a global issue from its social, environmental, and economic aspects. Poor SWM is one of the significant causes of resource degradation, environmental pollution, and public health problems. In this study, households’ solid waste generation and characterization were determined for selected cities in Ethiopia. Quantitative and qualitative study methods were applied to collect primary and secondary data to assess the household’s MSW generation rate and characterize the waste type's physical composition. The households’ daily MSW generation rates in Bole and Kirkos sub-cities, Addis Ababa, were found to be 0.54 and 0.26 Kg/capita/day, respectively, and the average …

Low Internal Air Space In Plants With Crassulacean Acid Metabolism May Be An Anatomical Spandrel, Alistair Leverett, Anne Borland, Emma Inge, Samantha Hartzell

Civil and Environmental Engineering Faculty Publications and Presentations

Crassulacean Acid Metabolism (CAM) is a photosynthetic adaptation found in at least 38 plant families. Typically, the anatomy of CAM plants is characterised by large photosynthetic cells and a low percentage of leaf volume comprised of internal air space (% IAS). It has been suggested that reduced mesophyll conductance (g_m) arising from low % IAS benefits CAM plants by preventing the movement of CO₂ out of cells and ultimately minimising leakage of CO₂ from leaves into the atmosphere during day-time decarboxylation. Here, we propose that low % IAS does not provide any adaptive benefit to …

Strain Measurement With Multiplexed Fbg Sensor Arrays: An Experimental Investigation, Bruno Da Silva Falcão, Ausama Giwelli, Melissa N. Kiewiet, Stephen Banks, George Yabesh, Lionel Esteban, Leigh Kiewiet, Nurudeen Yekeen, Yevhen Kovalyshen, Ludwig Monmusson, Ahmed Al-Yaseri, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

In conventional rock mechanics testing, radial strain measuring devices are usually attached to the sample's surface at its mid-height. Although this procedure provides a realistic picture of the lateral deformation undergone by homogeneous samples, however, this assumption may not be accurate if the tested rock has significant heterogeneity. Fibre Bragg Grating (FBG) sensors have recently been introduced to various rock testing applications due to their versatility over conventional strain gauges and radial cantilevers. FBG sensors have small size, multiplexing capability, and immunity to magnetic interference. The main objective of this study is to explore and understand the capabilities of FBG …

Investigation Of Pool Boiling Heat Transfer On Modified Copper And Aluminum Surfaces, Mariam Khaled Zaghloul

Theses

This thesis presents an investigation of pool-boiling heat transfer using the surfacemodification method. The studied boiling surfaces were smooth and rough pin-fins embedded on the copper and aluminum surfaces. This study visualizes bubble formation and departure diameter. Experimental testing aims to predict the heat transfer coefficients for different heat fluxes over smooth and rough pin-finned surfaces. The surface modification method allows changing the boiling surface characteristics, which can lead to enhanced heat transfer. Several factors were studied, including the heat-transfer coefficient, heat flux, bubble departure diameter, and formation time. Four surfaces were used for conducting the pool boiling experiment: a …

Prediction Of Drilling Fluid Lost-Circulation Zone Based On Deep Learning, Yili Kang, Chenglin Ma, Chengyuan Xu, Lijun You, Zhenjiang You

Research outputs 2022 to 2026

Lost circulation has become a crucial technical problem that restricts the quality and efficiency improvement of the drilling operation in deep oil and gas wells. The lost-circulation zone prediction has always been a hot and difficult research topic on the prevention and control of lost circulation. This study applied machine learning and statistical methods to deeply mine 105 groups and 29 features of loss data from typical loss block M. After removing 10 sets of noise data, the methods of mean removal, range scaling and normalization were used to pre-treat the 95 sets of the loss data. The multi-factor analysis …

Experimental Study On Fracture Plugging Effect Of Irregular-Shaped Lost Circulation Materials, Chengyuan Xu, Honglin Zhang, Jiping She, Guobin Jiang, Chi Peng, Zhenjiang You

Research outputs 2022 to 2026

Using micro-visualization experimental device for the formation of fracture plugging zone, the plugging behavior of irregular-shaped lost circulation materials (LCMs) with different types and concentrations in fractures was experimentally analyzed. The results show that the sealing time decreases significantly with the increase of material concentration. When the concentration is 20%, the sealing times of materials LCM-1∼LCM-5 are 6s, 7s, 5s, 6s, 4s, respectively. The formation of fracture plugging zone includes two stages, and the main factors affecting the formation of fracture plugging zone are flatness, roundness, convexity and concentrations. Flatness affects the retention stage of LCMs through the matching degree …