Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 25711 - 25740 of 196018

Full-Text Articles in Engineering

Hardware In The Loop Test Stand For Battery Management System Validation In Shipboard Controls, Cole Dawson Tschritter Aug 2023

Hardware In The Loop Test Stand For Battery Management System Validation In Shipboard Controls, Cole Dawson Tschritter

Electrical Engineering Dissertations - Archive

ABSTRACT: Traditionally, large-scale power systems have relied on power generation always exceeding the total load demand. Though this is most often the case, there are rare occurrences where failures in the generation, distribution, or even planning, that have led to situations where load demand quickly surpasses the generation capacity. In such cases, uncontrolled shedding of loads occurs, leading to brownouts or blackouts that can have catastrophic impact to both people and property. Advanced architectures, such as microgrids, offer a variety of improvements that are aimed at mitigating or even preventing these failures. Improvements include distributed power generation, active source and …

Go to article

High Magnification Surface Topography Based Digital Image Correlation (Dic) For Identifying Damage Accumulation And Crack Growth In Polycrystalline Nickel, Arash Valiollahi Aug 2023

High Magnification Surface Topography Based Digital Image Correlation (Dic) For Identifying Damage Accumulation And Crack Growth In Polycrystalline Nickel, Arash Valiollahi

Mechanical and Aerospace Engineering Dissertations - Archive

Damage index parameters that have been formulated to identify damage localization in plastically deformed materials typically require all six stress or strain components. Recently, simulations through Crystal Plasticity Finite Element Method (CPFEM) have been widely used to extract damage initiation parameters. However, these models are rarely verified due to the challenges in measuring the out-of-plane deformation/strain experimentally. A damage index combining the effective plastic strain and surface roughness change is investigated for identifying damage accumulation sites and predicting crack propagation path in polycrystalline pure Nickel. A novel Digital Image Correlation (DIC) technique is developed to measure both in-plane and out-of-plane …

Go to article

Investigation Of Thermal Performance Enhancement And Thermo-Mechanical Assessment Of Ite Using Single-Phase Immersion Cooling Technology, Pratik Bansode Aug 2023

Investigation Of Thermal Performance Enhancement And Thermo-Mechanical Assessment Of Ite Using Single-Phase Immersion Cooling Technology, Pratik Bansode

Mechanical and Aerospace Engineering Dissertations - Archive

The use of air-cooling as a thermal management technique in data centers has consistently maintained its importance, however its efficacy is limited to CPUs with lower power requirements. The expenses and energy use related to the air circulation process for high-power density racks are deemed excessively costly. The limits of air cooling have aroused concerns owing to its low specific heat capacity and poor thermal conductivity, which result in reduced effectiveness. Consequently, a substantial discourse has emerged about alternate and effective cooling methods that provide supplementary advantages, such as the recuperation of waste heat. In light of the limitations associated …

Go to article

Optimal Aggressive Constrained Trajectory Synthesis And Control For Multi-Copters, Tsung-Liang Liu Aug 2023

Optimal Aggressive Constrained Trajectory Synthesis And Control For Multi-Copters, Tsung-Liang Liu

Mechanical and Aerospace Engineering Dissertations - Archive

Multi-copters have become increasingly popular in recent years due to their availability, mobility, agility, and flexibility. They serve as excellent platforms for control experiments and various applications. Their characteristics also make them an attractive choice for high-speed aerial navigation in complex environments. Numerous studies have been conducted on aggressive trajectory generation and maneuver tracking. However, the level of aggressiveness achievable depends on the optimality of the trajectory plan and the dynamic capabilities of the vehicle. It would be valuable if one can generate a trajectory that fully utilizes the dynamic capabilities of the multi-copter while accommodating specific maneuvers at predetermined …

Go to article

Enhancing Experiential Learning Through Virtual Reality: A Case Study In System Design And Hazard Analysis, Rafia Rahman Rafa Aug 2023

Enhancing Experiential Learning Through Virtual Reality: A Case Study In System Design And Hazard Analysis, Rafia Rahman Rafa

Industrial, Manufacturing, and Systems Theses - Archive

ABSTRACT: The recent advancement of additive manufacturing (AM) technologies leads to an extensive need for an industrial workforce. Training in AM requires expensive capital investment to install and maintain this technology and proper knowledge about potential safety hazards. Experiential, immersive training platforms like Virtual Reality (VR) can overcome this challenge by providing opportunities for effective learning in a safe and controlled environment. VR can teach students through active participation and immersive, hands-on experiences, which is especially important for manufacturing processes involving high-risk conditions. VR can expose students to manufacturing hazards and allow them to learn through trial and error without …

Go to article

Analyzing The Thermomechanical Performance Of Tg400g Material Substrate Core Under Immersion Cooling, Venkateswar Vishnu Tirupati Venkatachal Aug 2023

Analyzing The Thermomechanical Performance Of Tg400g Material Substrate Core Under Immersion Cooling, Venkateswar Vishnu Tirupati Venkatachal

Mechanical and Aerospace Engineering Theses - Archive

The relentless surge in demand for seamless information exchange through consumer electronics, driven by the indispensable role of the Internet, has given rise to an unprecedented need for data centres. Yet, the energy consumption of conventional data centres, where a significant one-third of energy usage is attributed solely to cooling, has triggered an urgent quest for energy-efficient solutions. Immersion cooling technology appears as a promising contender due to its exceptional prowess in managing thermal energy. However, its potential impact on the reliability of IT equipment needs a more profound exploration before widespread adoption can be realized. This study embarks on …

Go to article

Quantification And Identification Of Neuro-Electrophysiological Markers And Brain Network For Biomedical Applications, Shu Kang Aug 2023

Quantification And Identification Of Neuro-Electrophysiological Markers And Brain Network For Biomedical Applications, Shu Kang

Bioengineering Dissertations - Archive

Electroencephalogram (EEG) can detect and monitor neuro-electrophysiological signals in the human brain, including assessing brain function in newborns at risk of neurological injury and healthy adults undergoing intervention with prefrontal transcranial photobiomodulation (tPBM). Moreover, EEG-based brain functional connectivity can be assessed in either resting-state or task-based measurements using graph-theoretical network modeling. However, the management of newborns with mild hypoxic ischemic encephalopathy (HIE) is controversial, and no study has investigated the EEG-based brain network and information flow resulting from HIE. Also, the underlying electrophysiological mechanism of tPBM is still unclear, and further research is needed to determine optimal parameters for tPBM …

Go to article

An Accelerated Corrosion Test Method For Pre-Cracked Reinforced Concrete, Shahriar Abed Aug 2023

An Accelerated Corrosion Test Method For Pre-Cracked Reinforced Concrete, Shahriar Abed

Civil Engineering Dissertations - Archive

Reinforced concrete (RC), a composite material combining the strength of concrete and the tensile strength of steel reinforcement, has significantly transformed the field of civil engineering and contributed to the advancement of modern infrastructure. Reinforced concrete structures are susceptible to deterioration over time despite their numerous advantages. One of the primary factors leading to the degradation of RC is the corrosion of steel reinforcement, primarily caused by exposure to aggressive environmental elements such as chloride ions, carbonation, and moisture. This dissertation aims to provide valuable insights into the accelerated corrosion behavior of steel bars embedded in concrete, considering factors such …

Go to article

Comparison Of Condition Prediction Models To Prioritize Sewer Pipe Inspections, Madhuri Arjun Aug 2023

Comparison Of Condition Prediction Models To Prioritize Sewer Pipe Inspections, Madhuri Arjun

Civil Engineering Dissertations - Archive

Over time, wastewater collection systems deteriorate, necessitating ongoing adjustments and the development of asset management frameworks by utility proprietors to maintain the performance of their assets. Any asset management framework should emphasize the importance of asset inspection and condition assessment for system-efficient operation and maintenance. In the United States, closed-circuit television (CCTV) is the most common method for inspecting the interior of sewer pipelines. This procedure is expensive and time-consuming due to a city's extensive inventory of pipes. Due to the immense quantity of these pipes, every municipality can only inspect some sections of sanitary sewer pipes promptly. Therefore, the …

Go to article

Artificial Intelligence-Based Evaluation Of Pipeline Structures Using Multi-Sensor Robots, Mohammad Shaher Moh'd Rababeh Aug 2023

Artificial Intelligence-Based Evaluation Of Pipeline Structures Using Multi-Sensor Robots, Mohammad Shaher Moh'd Rababeh

Civil Engineering Dissertations - Archive

ABSTRACT: ARTIFICIAL INTELLIGENCE-BASED EVALUATION OF PIPELINE STRUCTURES USING MULTI-SENSOR ROBOTS Mohammad Shaher Rababeh, Ph.D. The University of Texas at Arlington, August 2023 Supervising Professor: Ali Abolmaali All around the world, pipeline systems are safe, efficient, and cost-effective for transporting liquids such as stormwater and wastewater. However, different defects develop in pipeline structures with aging and use. Leaks and significant failures might create severe danger for the environment, and for humans in urban areas. This deterioration in pipelines happens under the influence of different factors. In general, observing and evaluating pipelines will allow us to understand its behavior under various conditions …

Go to article

Breaking The Lignin Barrier With Termite Tav5 Treatment Technology (T4): Biopower And Biofuel From Agricultural Waste, Hussain Ali Aug 2023

Breaking The Lignin Barrier With Termite Tav5 Treatment Technology (T4): Biopower And Biofuel From Agricultural Waste, Hussain Ali

Civil Engineering Dissertations - Archive

Bioenergy obtained from anaerobic digestion of lignocellulose biomass is one of the promising candidates to help move towards a fossil fuel free future. Agriculture waste has up to 90% lignocellulose content, and the eight leading US crops produce over 500 million tons of residue each year. Unfortunately, lignin is resistant to microbial attack under low oxygen conditions which normally occur in anaerobic digesters, and it often shields lignocellulose components (cellulose and hemicellulose) from decomposition as well. Traditional physical/chemical methods for destroying lignin are typically costly due to energy and chemical requirements and can create toxic intermediates (Rahimi et al., 2020). …

Go to article

Coastal Home Elevation For Flood Mitigation: Structural Safety And Benefit/Cost Analysis, Cedric Ling Aug 2023

Coastal Home Elevation For Flood Mitigation: Structural Safety And Benefit/Cost Analysis, Cedric Ling

Civil Engineering Dissertations - Archive

construction practice along the Texas Gulf coast under uniform floor live load. The first specimen had four panels with monolithically poured grade beams around each panel, while the second specimen had two panels with monolithically poured grade beams supported by additional steel beams. The second specimen also included carbon fiber reinforced polymer (CFRP) laminate retrofitting under one of the panels. The slabs were supported by concrete block masonry piers with various contact conditions. It was found that the typical contractor-determined elevation layout can withstand the building code-mandated floor live load. Increased column spacing decreased slab load capacity as expected. The …

Go to article

Assessing The Treatment Efficiency Of Expanded Shale As A Filter Medium In A Bioswale, Ashish Bhurtyal Aug 2023

Assessing The Treatment Efficiency Of Expanded Shale As A Filter Medium In A Bioswale, Ashish Bhurtyal

Civil Engineering Theses - Archive

This thesis presents a laboratory investigation focusing on the use of expanded shale as a filter media in bioswales. Bioswales are known for their effectiveness in improving water quality by removing pollutants such as total suspended solids (TSS) and turbidity. While conventional filter media with rocks, sand, and mulches have been utilized in bioswales to enhance infiltration capacity, the potential of expanded shale as an engineered media has not been thoroughly assessed and documented. The study conducted a series of thirty experiments involving three different flow conditions to mimic typical Best Management Practices (BMP) applications. The primary focus was on …

Go to article

Analytical And Experimental Of Electromagnetic Wave Propagation Effect On Moisture And Corrosion In An Inhomogeneous Medium, Dafnik Saril Kumar David Aug 2023

Analytical And Experimental Of Electromagnetic Wave Propagation Effect On Moisture And Corrosion In An Inhomogeneous Medium, Dafnik Saril Kumar David

Civil Engineering Dissertations - Archive

This dissertation presents electromagnetic wave studies for infrastructure. The research contributes to a comprehensive understanding of electromagnetic wave propagation in moisture and provides insights into corrosion detection and monitoring in reinforced concrete infrastructure. Three major studies are performed to: 1) understand the multiple wave scattering in inhomogeneous moisture medium, 2) validate the experimental reflection through analytical finite difference time domain simulations with experimental measurements, and 3) evaluate the electromagnetic wave responses in the early stage and post stage corrosion experimentally, and 4) develop rapid corrosion monitoring methodology for field applications by employing cutting-edge electromagnetic wave image processing as refer to …

Go to article

Mastering Enterprise Networks, Mathew J. Heath Van Horn Aug 2023

Mastering Enterprise Networks, Mathew J. Heath Van Horn

OER Main

The book starts by providing you with step-by-step instructions to create your own virtual environment on any modest PC or laptop running Windows. After setting up your own learning space, we will walk you through many real-world networking concepts that culminate with you building your own enterprise network. Once you are comfortable with creating computer networks, we will then show you how to attack your own network and then how to defend your network against those attacks.

Go to article

A Transport Property-Based Assessment Of Triple Ionic-Electronic Conductors As Cathodes For Protonic Ceramic Fuel Cells, Jack Harrison Duffy Aug 2023

A Transport Property-Based Assessment Of Triple Ionic-Electronic Conductors As Cathodes For Protonic Ceramic Fuel Cells, Jack Harrison Duffy

All Dissertations

Triple ionic-electronic conductors (TIECs) are a widely studied class of materials for electrodes in ceramic electrochemical devices such as protonic ceramic fuel cells. These ceramics are perovskite-based and exhibit concurrent conductivity of protons, oxide ions, and electrons at elevated temperatures. Despite their numerous references in literature, few studies have systematically probed the fundamental surface- and bulk-level properties of TIECs. In this dissertation, dopant levels are systematically altered in the BaCo0.4Fe0.4Zr0.1Y0.1O3-δ-type perovskite TIEC to reveal the effects on structure, transport properties, and durability of each material. The results of this work …

Go to article

Assessment Of Land And Renewable Energy Resource Potential For Regional Power System Integration With Ml Spatio-Temporal Clustering, Rosemary E. Alden, Claire Halloran, Donovin D. Lewis, Dan M. Ionel Aug 2023

Assessment Of Land And Renewable Energy Resource Potential For Regional Power System Integration With Ml Spatio-Temporal Clustering, Rosemary E. Alden, Claire Halloran, Donovin D. Lewis, Dan M. Ionel

Electrical and Computer Engineering Graduate Research

Toward the planning and development of future electric power systems with extremely large penetration of renewable resources (DERs), detailed assessment of power and energy potential is needed considering both spatial and temporal data per region. Within this paper, a methodology for spatio-temporal DER capacity potential considering land cover types and weather variation are presented using spatio-temporal data. Additionally, an application of empirical orthogonal functions (EOFs) and max-p unsupervised learning techniques is proposed for DER generation to identify zones of similar output power in space and time. A detailed case study for the example region of Kentucky, USA is completed with …

Go to article

Tunable Linewidth Chip-Level Lasers Using Hybrid Integration Methods, Charles Porter Aug 2023

Tunable Linewidth Chip-Level Lasers Using Hybrid Integration Methods, Charles Porter

All Theses

Photonic integrated circuits (PICs) have significant value in today’s world of research. They enable devices to experience large reductions in size, weight, operation power, and cost (SWAPc), making photonic technology more accessible than ever. The functionality of PICs is greatly enhanced due to the realization of both active and passive devices within a single device structure. This is made possible through hybrid integration, which utilizes various coupling methods to transfer light from an active chip to a passive chip. Hybrid integration technology tremendously expands the capabilities of PICs, leading to a plethora of applications. One significant application is that of …

Go to article

The Potential Of Iron Electrodes In Electrochemical Cells For The Stabilization Of Synthetic Urine, Skyler Voisin Aug 2023

The Potential Of Iron Electrodes In Electrochemical Cells For The Stabilization Of Synthetic Urine, Skyler Voisin

All Theses

Source separation and urine treatment present the opportunity to significantly reduce influent concentrations of nitrogen and phosphorus in wastewater treatment plants and to capture those minerals for reuse. This study aims to use electrochemical cells with a sacrificial iron electrode to produce hydrogen peroxide in situ for the stabilization of urea while dissolving ferrous iron ions to promote the precipitation of phosphate into compounds such as vivianite (Fe3 (PO4)2 ∙ 8 H2O), a precipitate with potential uses in agriculture and manufacturing. Synthetic urine samples were treated as anolyte, then were given time to form …

Go to article

Experimental Investigation Of Water Quality Impact On The Compressive Strength Of Concrete, Shayan Sharifzad Aug 2023

Experimental Investigation Of Water Quality Impact On The Compressive Strength Of Concrete, Shayan Sharifzad

Civil Engineering Dissertations - Archive

Water is an indispensable component in concrete, as it enables crucial chemical reactions. Therefore, the quality of water used in concrete plays a vital role in its performance. Contaminated water, sewage, or high-salt water can disrupt the cement's setting process and overall performance. As a result, it is crucial to prioritize the use of drinking water or water of equivalent quality in concrete production. While the ideal water-to-cement ratio for concrete is typically around 0.20, practical considerations often require a higher water content ranging from 0.30 to 0.70. This increased water consumption is necessary to ensure workability and achieve optimal …

Go to article

Disaster Management And Recovery: Estimating The Disaster Impacts On Construction Costs And Evaluating The Policy Effects On Disaster Recovery, Sooin Kim Aug 2023

Disaster Management And Recovery: Estimating The Disaster Impacts On Construction Costs And Evaluating The Policy Effects On Disaster Recovery, Sooin Kim

Civil Engineering Dissertations - Archive

A rapidly increasing number of natural hazards pose an inevitable threat to communities. More than a hundred natural hazards strike the United States every year, causing numerous fatalities and billions of dollars of property and infrastructure damage. The total cost of U.S. weather and climate disasters since 1980 has already exceeded 2 trillion dollars. As the number of U.S. county-level disasters has approximately tripled in recent decades due to rapid climate change, a greater share of the population is now more likely to expose to natural disasters. Adequate and timely reconstruction and recovery in post-disaster situations are essential for the …

Go to article

Wide Band-Gap Metamaterials As Seismic Shields, Ashraf Mohammed Daradkeh Aug 2023

Wide Band-Gap Metamaterials As Seismic Shields, Ashraf Mohammed Daradkeh

Civil Engineering Dissertations - Archive

In the past decade, a new paradigm gained popularity among researchers aiming to protect structures from low-frequency seismic vibrations using metamaterials. However, developing a workable design for metamaterials is still challenging, given the various factors such as material availability, size, and shape of its components. This project proposes a new configuration that can widen the attenuation frequency of metamaterials and evaluates the attenuation ability of double-graded metamaterials. The project investigates unit cell parameters such as but not limited to size, density, and modulus of elasticity to finalize a unit cell with the broadest possible bandgap by using common construction material …

Go to article

Model Development To Evaluate Consumers’ Intention To Adopt Electric Vehicles, Apurva Pamidimukkala Aug 2023

Model Development To Evaluate Consumers’ Intention To Adopt Electric Vehicles, Apurva Pamidimukkala

Civil Engineering Dissertations - Archive

ABSTRACT: The ever-increasing concern over climate change is compelling global economies to employ alternative fuel technology to combat the vehicular emissions of greenhouse gases. Electric vehicles (EVs) offer a viable environmentally friendly alternative that has the potential to facilitate an effective shift towards a sustainable transportation system with low emissions while preserving the environment. However, well-intentioned policies and other incentives have not been able to transcend the factors that prevent their adoption. Therefore, this research aims to develop three models to determine the factors affecting consumers’ willingness to adopt EVs. A questionnaire survey was designed based on an extensive literature …

Go to article

Topics In Optimization For Sustainable Energy Planning, Bahareh Nasirian Aug 2023

Topics In Optimization For Sustainable Energy Planning, Bahareh Nasirian

Industrial, Manufacturing, and Systems Engineering Dissertations - Archive

ABSTRACT: Due to the current trend of rising energy demand, finding alternate energy sources is vital. Many cities consider renewable energy as a component of a sustainable future. Typically, organic wastes are considered renewable energy sources. Wastes can be converted to proper energy forms using waste-to-energy technologies. On the other hand, more renewable energy sources in the power system may increase energy market stochasticity, alter system operation, and pose new problems for the current supply and demand equilibrium, which consequently requires new control methods. Hence, taking into account the issues mentioned above, in this research, we address organic waste conversion …

Go to article

Estimation Of Suspended Sediment Concentration Along The Lower Brazos River Using Satellite Imagery And Machine Learning, Trevor Stull Aug 2023

Estimation Of Suspended Sediment Concentration Along The Lower Brazos River Using Satellite Imagery And Machine Learning, Trevor Stull

Civil Engineering Theses - Archive

ABSTRACT: Suspended sediment transport in river basins is important for many water management planning activities to maintain safe drinking water for the community and maintenance of water quality and waterways for the ecosystem. Currently, the traditional way to measure suspended sediment effectively and reliably is by collecting field samples in the river body, which is very time consuming and only provide a point value of suspended sediment within the waterbody at the instant the sample was taken. This thesis focuses on developing models that estimate suspended sediment concentrations for the lower Brazos River using satellite imagery from publicly available data …

Go to article

Comparative Mechanical Property Evaluation Of Ultra-High-Performance Concrete Reinforced With High-Strength Steel Straight And Hooked Fibers, Sujan Kumar Singh Aug 2023

Comparative Mechanical Property Evaluation Of Ultra-High-Performance Concrete Reinforced With High-Strength Steel Straight And Hooked Fibers, Sujan Kumar Singh

Civil Engineering Theses - Archive

This study investigates the tensile properties and ductility of ultra-high-performance concrete (UHPC) reinforced with high-strength steel hooked fibers with a tensile strength of 445 ksi (3,070 MPa) and compares its tensile performance to that of UHPC reinforced with commonly used high-strength smooth steel microfibers with a tensile strength of 2,160 MPa (313 ksi). The research is based on a proprietary mix developed at the University of Texas at Arlington and investigates the mechanical properties of UHPC with varying fiber volume fractions of 1.5%, 2%, 2.25%, and 2.4%. The experimental results indicate that UHPC reinforced with high strength hooked fibers generally …

Go to article

Electromagnetic Simulations Of The Lansce Chopper Structure, Yusuf Sahin Aug 2023

Electromagnetic Simulations Of The Lansce Chopper Structure, Yusuf Sahin

Electrical and Computer Engineering ETDs

Particle accelerators are important for basic research as well as in applications such as ion implantation and cancer therapy. One important accelerator is the Los Alamos Neutron Science Center (LANSCE) located at Los Alamos National Laboratory (LANL) that primarily produces neutrons for research. The beam chopper simulation described here is a study to provide better modeling of this subsystem of LANSCE. A chopper is a device in which particles are intermittently sliced and directed to a target and/or experiment. The simulations in this thesis are used to analyze the correct operating parameters of the chopper. A good chopper model can …

Go to article

Speaker Diarization Of Noisy Classrooms From A Single Microphone Based On An Array Of Virtual Microphones And Machine Learning, Richard Briggs Aug 2023

Speaker Diarization Of Noisy Classrooms From A Single Microphone Based On An Array Of Virtual Microphones And Machine Learning, Richard Briggs

Electrical and Computer Engineering ETDs

Speaker diarization from a single microphone is extremely challenging in noisy classroom environments. A new method based on simulating a microphone array has shown promising results, while requiring very little training. It used a minimum distance classifier to identify the speaker among a list of possible speakers. This thesis investigates machine learning methods for determining the speaker. The AOLME dataset that was used contains 758 samples totaling 894.4 seconds. Each is taken from a noisy classroom environment, focusing on five speakers - any one of whom could be active in a given sample - lasting an average of 1.2 seconds. …

Go to article

Wirelessly Powering A Sea Of Sensors For Perimeter Security Applications, Ian River Chavez Aug 2023

Wirelessly Powering A Sea Of Sensors For Perimeter Security Applications, Ian River Chavez

Electrical and Computer Engineering ETDs

his thesis presents an innovative application of Inductive Power Transfer (IPT) technology for perimeter security systems. The approach leverages the physical properties of IPT to detect intrusions by monitoring voltage changes in wirelessly powered sensor nodes, which can double as components of an intrusion detection system. Disturbances in node orientation, indicative of potential intrusions, alter the sensor node’s resonant frequency and create measurable voltage shifts. This study explores the concept in-depth, from the analysis of resonant inductive coupling in various resonant inductive modes, to the design of transmit loops, sensor nodes, and the techniques required to ensure optimum power transfer. …

Go to article

Noise-Resilient And Adaptive Distributed Control Techniques For Microgrids, Seyed Iman Habibi Aug 2023

Noise-Resilient And Adaptive Distributed Control Techniques For Microgrids, Seyed Iman Habibi

Electrical and Computer Engineering ETDs

This dissertation focuses on addressing the critical tasks of secondary control in microgrids, particularly in the islanding operating mode. The presence of noise in sensors and communication links necessitates the design of a noise-resilient secondary control approach. In response, this dissertation introduces the Nonlinear Generalized Minimum Variance (NGMV) control approach into the islanded AC and DC microgrid's secondary control system. The effectiveness of the proposed approach is demonstrated through MATLAB simulations. Additionally, the dissertation presents an adaptive, model-free, and data-driven control approach for secondary voltage control in AC microgrids, addressing uncertainties. By employing Unfalsified Adaptive Control (UAC), the approach selects …

Go to article

First Prev Next Last