Engineering Commons^™

A Multi-Organ Maize Metabolic Model Connects Temperature Stress With Energy Production And Reducing Power Generation, Niaz Bahar Chowdhury, Margaret Simons- Senftle, Berengere Decouard, Isabelle Quillere, Martine Rigault, Karuna Anna Sajeevan, Bibek Acharya, Ratul Chowdhury, Bertrand Hirel, Alia Dellagi, Costas Maranas, Rajib Saha

Department of Chemical and Biomolecular Engineering: Faculty Publications

Climate change has adversely affected maize productivity. Thereby, a holistic understanding of metabolic crosstalk among its organs is important to address this issue. Thus, we reconstructed the first multi-organ maize metabolicmodel, iZMA6517, and contextualized itwith heat and cold stress transcriptomics data using expression distributed reaction flux measurement (EXTREAM) algorithm. Furthermore, implementing metabolic bottleneck analysis on contextualized models revealed differences between these stresses. While both stresses had reducing power bottlenecks, heat stress had additional energy generation bottlenecks.We also performed thermodynamic driving force analysis, revealing thermodynamics-reducing power-energy generation axis dictating the nature of temperature stress responses. Thus, a temperaturetolerant maize ideotype can …

Nano Composite Piezo-Responsive Foam Enabled Pressure Mapping, Jake Duane Sundet

Theses and Dissertations

Pressure injuries cause pain both physically and financially. By creating a comfortable pressure mapping system, pressure injuries can more easily be prevented, and a large expenditure avoided. Nano composite piezo-responsive foam (NCPF) is an inexpensive foam that can be used to measure a static load while still providing a comfortable interface. As NCPF compresses, the impedance changes, correlating to a change in pressure. Optimizing electrode geometry is needed to take full advantage of the impedance change NCPF incurs upon deformation. To optimize electrode geometry, a design of experiment was performed which concluded that a one square inch area of interlaced …

Optimal Inverter-Based Resource Installation To Minimize Technical Energy Losses In Distribution Systems, Felipe B. Dantas, Damasio Fernandes, Washington L.A. Neves, Alana K.X.B. Branco, Flavio Costa

Michigan Tech Publications

This paper proposes an algorithm for the optimal installation of inverter-based resources (IBR) composed of wind energy conversion systems, photovoltaic systems, and battery energy storage systems in distribution systems using genetic algorithm (GA) and the cuckoo search (CS) as optimization techniques. The OpenDSS software is used to calculate the power flow in the distribution system with different penetration levels of IBRs. It is used a standard load shape of the IEEE 123 bus system programmed in OpenDSS and irradiance, temperature, and wind speed curves from Brazil. The proposed algorithm, using a genetic algorithm and cuckoo search, was able to define …

Wire Electrical Discharge Machining Of Aisi304 And Aisi316 Alloys: A Comparative Assessment Of Machining Responses, Empirical Modeling And Multi-Objective Optimization, Mona Aboueleaz, Noha Naeim, Islam Abdelgaliel, Mohamed Aly, Ahmed Elkaseer

Mechanical Engineering

This research investigates the multi-response of both material removal rate (MRR) and surface roughness (Ra) for the wire electrical discharge machining (WEDM) of two stainless steel alloys: AISI 304 and AISI 316. Experimental results are utilized to compare the machining responses obtained for AISI 316 with those obtained for AISI 304, as previously reported in the literature. The experimental work is conducted through a full factorial experimental design of five running parameters with different levels: applied voltage, transverse feed, pulse-on/pulse-off times and current intensity. The machined workpieces are analyzed using an image processing technique in order to evaluate the size …

Integrated Periphyton Biofilters In Marine Recirculating Aquaculture Systems, Adam N. Bell

USF Tampa Graduate Theses and Dissertations

Marine aquaculture is a growing industry that has the potential to reduce eutrophication, overfishing, and loss of biodiversity. Recirculating aquaculture systems (RAS) are a type of aquaculture system that decreases discharge, raises biological control, and conserves water; however, RAS are challenged due to high energy cost, low biodiversity, water quality control, and waste nutrients. Periphyton biofilters are a new technology that allows for feed production, water quality control, microbial diversity, and resource recovery in marine aquaculture systems. The overarching question that this dissertation investigates is, how can periphyton biofilters be integrated into RAS to address the challenges of modern sustainable …

Synthetic Aperture Scatter Imaging, Qian Huang, Zhipeng Dong, Gregory Nero, Yuzuru Takashima, Timothy J. Schulz, David J. Brady

Michigan Tech Publications

Diffraction limits the minimum resolvable feature on remotely observed targets to $\lambda R_{c}/A_{c}$, where $\lambda$ is the operating wavelength, $R_{c}$ is the range to the target and $A_{c}$ is the diameter of the observing aperture. Resolution is often further reduced by scatter or turbulence. Here we show that analysis of scattered coherent illumination can be used to achieve resolution proportional to $\lambda R_{s}/A_{s}$, where $R_{s}$ is the range between the scatterer and the target and $A_{s}$ is the diameter of the observed scatter. Theoretical analysis suggests that this approach can yield resolution up to 1000× better than the diffraction limit. …

A Novel Application Of Spinning Disk Technology To Collect Plasma From Whole Blood Prior To Quantifying Plasma Rna, Naomi Rapier-Sharman, Mae-Lynn L. Hutchinson, Carlos M. Moreno, Abraham Quaye, Brian D. Poole, K. Scott Weber, William G. Pitt, Brett E. Pickett

Faculty Publications

The spinning disk technology has previously been utilized to isolate bacterial components from blood in hours instead of days. We hypothesized that this platform could be applied as an alternative approach to isolating plasma RNA from a whole blood sample. We consequently tested the efficacy of the spinning disk technology to extract plasma from whole blood upstream of RNA isolation and analysis. To do so, we collected plasma using either the spinning disk or the typical two-spin centrifuge method. We found that the spinning disk method results in significantly more hemolysis during collection than the conventional two-spin centrifuge method. However, …

S-Net: A Multiple Cross Aggregation Convolutional Architecture For Automatic Segmentation Of Small/Thin Structures For Cardiovascular Applications, Nan Mu, Zonghan Lyu, Mostafa Rezaeitaleshmahalleh, Cassie Bonifas, Jordan Gosnell, Marcus Haw, Joseph Vettukattil, Jingfeng Jiang

Michigan Tech Publications

With the success of U-Net or its variants in automatic medical image segmentation, building a fully convolutional network (FCN) based on an encoder-decoder structure has become an effective end-to-end learning approach. However, the intrinsic property of FCNs is that as the encoder deepens, higher-level features are learned, and the receptive field size of the network increases, which results in unsatisfactory performance for detecting low-level small/thin structures such as atrial walls and small arteries. To address this issue, we propose to keep the different encoding layer features at their original sizes to constrain the receptive field from increasing as the network …

Research Outreach Interdisciplinary Activity To Classify Olive Oil Blends Integrating Multicolor Imaging, Image Processing, And Machine Learning, Allan Abraham, Kameshwaran Balachandran

Undergraduate Research (Journal)

This outreach undergraduate research project presents a low-cost method to distinguish the quality of different olive oils. The proposed method is based on an indirect measurement of the chlorophyll molecules present when a green laser diode illuminates the oil sample. Oil blends can be classified into five classes (no olive oil, light olive oil, medium olive oil, olive oil, and extra virgin olive oil) by quantifying the ratio of the red channel versus the green channel along the laser illumination path from a color image. After labeling each oil blend, a convolutional neural network has been implemented and trained to …

Development, Implementation, And Evaluation Of Swirl-Combustion Strategies For Optimal Performance Of Ammonia As A Fuel For Gas Turbine Engines, Varun Nanjunda Rao Viswamithra

LSU Doctoral Dissertations

In an effort to reduce harmful effects of greenhouse gas emissions, ammonia is being pursued as a fuel for power generation as it is a carbon-free energy source. However, the use of ammonia-air mixtures in premixed swirl combustors poses challenges due to low flame speed and reactivity resulting in combustor stability issues in addition to high Nitrous Oxide (NOx) emissions due to the presence of fuel-bound Nitrogen. The first part of this study attempts to overcome lean blowout limits of methane-ammonia-air mixtures using a novel, multi-point () injection strategy, whereby micron-sized holes on the swirler vanes generate a co-flowing stream …

Biological Seawater Desalination Using Green Algae And Cyanobacteria, Abdul Mannan Zafar

Thesis/ Dissertation Defenses

Water shortage in many coastal parts of the world is reaching alarming situation, including the United Arab Emirates. Urbanization and rapid population growth are generating critical water demands with an increase in per capita consumption. Seawater is usually treated by membrane processes such as reverse osmosis (RO). However, this technology is energy intensive and generates excessive brine as a waste. The solution to this problem can be found in natural remediation techniques that can reduce salt concentration from seawater, such as halophytes. A salt-tolerant species can consume Na+ and Clions and increase cellular growth which is termed biological desalination or …

Compressibility Behavior Of Conditioned Sandy Clay Considering The Physical Degradation Of Foam: Tunneling Issue, Mœz Selmi, Yahya Alassaf, Mariem Kacem, Mehrez Jamei

Journal of Sustainable Mining

Surfactants in the form of liquid foam are commonly used for ensuring the fluidity of conditioned soil during shield tunneling in mining zone. The compressibility can be significantly affected, depending on the percentage of fine soil. Thus, this paper investigates the compressibility of foam-conditioned fine soil. Oedometric tests as a function of the percentage of foam have been performed. Foam’s stability was analyzed, considering a laboratory soil made from 40% kaolinite and 60% of sand and mixed with a foaming agent based on an anionic surfactant. Experimental results showed that the foam stability was manifested through a reduction of the …

Novel Method Of The Quantification Of Turbulent Fluid Flow In Silicone Artery Phantoms Using Acoustic Analysis, Julia Wong

Master's Theses

Cardiovascular disease is the leading cause of death globally and is responsible for taking 17.9 million lives per year. Despite the use of clinical treatments and detection methods, there remains a large population of individuals that suffer from CVD whose symptoms are left undetected and untreated prior to a life-threatening cardiac event. This highlights a need for an early detection method that can prevent the manifestation and worsening of the disease as well as address limitations of current early detection methods. An area of interest for early detection of CVD is subclinical atherosclerosis, which is the long, early, asymptomatic stage …

Bronx Community College Center For Sustainable Energy Collection, 2004-2013, Allen Thomas, Cynthia Tobar

Finding Aids

Finding aid for the Bronx Community College Center for Sustainable Energy Collection prepared by Bronx Community College Archives.

Development Of An Angiogenic Tissue-On-A-Chip Microenvironment, Eric Stuehr

Master's Theses

Preclinical testing is necessary to investigate the safety and efficacy of novel therapeutics before moving to clinical trials, yet approximately 90% of these therapies fail once tested in humans. This has led to increased interest in developing robust preclinical models that accurately mimic the complex human in vivo physiology. Microfluidic devices that can introduce dynamic conditions to 3D cell/organoid cultures, also known as tissue-on-a-chip, have emerged as physiologically relevant in vitro preclinical models that can achieve high throughput screening of therapeutics. The research presented here aimed to develop an angiogenic environment within a novel microfluidic device to stimulate formation of …

Thermo-Mechanical Instabilities In Next-Generation Friction Materials In High-Speed Sliding Systems, Kingsford Koranteng

Electronic Theses and Dissertations

For centuries, the manufacturing industry has incorporated metals like copper into friction materials to enhance thermal properties and minimize thermo-mechanical instabilities (TMI) in high-speed sliding systems. Unfortunately, these metals have adverse environmental effects due to the emission of hazardous particulate matter. As a result, there is a growing movement towards adopting next-generation friction materials as an alternative solution.

The study begins by conducting experimental and numerical investigations to examine the instabilities found in metal-based friction materials. The primary objective is to utilize the insights gained from the investigations to computationally explore effective strategies for mitigating various instabilities that may arise …

Molecular Dynamics Study Of Characterization In Metal-Free Friction Materials, Yizhan Zhang

Electronic Theses and Dissertations

Metallic friction materials currently used in industry may adversely impact the environment. Substitutions for metals in friction materials, on the other hand, can introduce operational safety issues and other unforeseeable issues such as thermal-mechanical instabilities and insufficient strength. In view of it, this dissertation focuses on developing different kinds of materials from simple structure to complex structure and evaluating the material properties with the assistance of molecular dynamics (MD) tools at the nano scale.

First, the concept of the contacted surfaces in friction at the atomic scale was introduced in order to get accurate understanding of the friction process compared …

Quantitative, Photocurrent Multidimensional Coherent Spectroscopy, Adam Halaoui

Electronic Theses and Dissertations

Multidimensional coherent spectroscopy (MDCS) is a quickly growing field that has a lot of advantages over more conventional forms of spectroscopy. These advantages all come from the fact that MDCS allows us to get time resolved correlated emission and absorption spectra using very precisely chosen interactions between the density matrix and the excitation laser. MDCS spectra gives the researcher a lot of information that can be extracted purely through qualitative analysis. This is possible because state couplings are entirely separated on the spectra, and once we know how to read the data, we can see how carriers transport in the …

Frequency Stability Constrained Grid Operation With High Penetration Of Renewables, Ningchao Gao

Electronic Theses and Dissertations

Achieving carbon neutrality necessitates a significant integration of renewable energy into power systems. However, the swift implementation of fluctuating renewable energy (VRE) sources such as solar photovoltaics (PV) exacerbates real time power imbalances due to the randomness and uncertainty associated with VRE power generation. Further, the declining reliance on conventional synchronous generators (SGs) for system inertia presents considerable challenges in maintaining frequency stability, especially following disturbances.

Two possible solutions are proposed to address the first issue. Firstly, a speedy real time generation dispatch can be scheduled to allocate generation resources within short time intervals to effectively respond to changes in …

Changes In Balance With Brain Inflammation: Sensitivity In Dual Motor Mechanisms, Hannah Mcdade

Electronic Theses and Dissertations

Concussion assessment in athletes has gained prominence due to potential long-term consequences of traumatic brain injuries. Evaluating balance alterations is crucial for understanding post-injury motor control strategies. This study introduces a novel approach to understanding center of pressure (COP) dynamics during quiet stance tasks for assessing balance impairments in athletes recovering from concussion. Concussed athletes often experience impaired motor function and cognitive deficits, increasing the risk of orthopedic injury. Traditional balance assessments focus on total COP (COPt), overlooking nuanced hip and ankle mechanisms. This research investigates COP variations between constant loading (COPc) and variable loading (COPv) signals in concussed athletes …

Adoption Of Pedagogical Innovations: Social Networks Of Engineering Education Guilds, Darby Riley, Kaitlin Mallouk, Courtney Faber, Alexandra Coso Strong

Henry M. Rowan College of Engineering Departmental Research

This work investigates how innovations propagate through two professional networks (guilds): the Kern Entrepreneurial Engineering Network (KEEN) and the Consortium to Promote Reflection in Engineering Education (CPREE). Previous research has demonstrated that the adoption of pedagogical innovations is supported by the socialization of the innovation among potential adopters. In this work, we use social network analysis to explore the impact of professional connections on innovation adoption. Our research questions are: (1) How does overall social structure differ between guilds? (2) How do measures of social network structures relate to innovation adoption? A survey was distributed to members of KEEN and …

Landscape Position And Cover Crops Affects Crop Yields In A Terrace-Tiled Field, Harpreet Kaur, Kelly A. Nelson, Gurbir Singh, Gurpreet Kaur, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Cover Crops (CC) Provide Soil Ecosystem Benefits Including Reduced Soil Erosion, Improved Soil Health, and Nutrient Cycling. However, the Effect of CCs on Rotational Commodity Crop Grain Yields and Nutrient Uptake May Vary at Different Landscape Positions and under Different Soil Moisture Dynamics. the Objectives of This Study Were to Determine the Influence of CCs in a Terraced Field on Soil Moisture at Crop Emergence and Reproductive Stages of Corn (Zea Mays L) and Soybean (Glycine Max L. Merr.) Development, and Evaluate CCmix (Wheat (Triticum Aestivum L.), Radish (Raphanus Raphanistrum Subsp. Sativus), and Turnip (Brassica Rapa Subsp. Rapa)) and Cereal …

Effect Of Ultraviolet Light On Field Emission Performance And Lifetime Of Lateral Field Emitter Devices, Ranajoy Bhattacharya, Marco Turchetti, Matthew Yeung, P. Donald Keathley, Karl K. Berggren, Jim Browning

Electrical and Computer Engineering Faculty Publications and Presentations

Lateral field emission devices have been characterized before and after ultraviolet (UV) light exposure. Two types of planar device structures, diode and bowtie, were studied. These nanoscale devices have 9–15 nm tip-to-tip (bowtie) or tip-to-collector (diode) dimensions with the tips fabricated from Au/Ti. Typical currents of 2–5 nA per tip at 6 V were measured. It was observed that after UV exposure, the collected current was reduced by > 28% for the case of a bowtie device; whereas the current was reduced by > 39% for the case of a diode device. This reduction can be attributed to water vapor desorption on …

Custom Led Dashboard Integration For The Cal Poly Racing Team, Josue Hernandez

Computer Engineering

The Custom LED Dashboard Integration was made for the Cal Poly Racing Team, specifically the BAJA division. The dashboard was made as a way to combat the current limitations endured from the past methods used to display critical information of the vehicle to the car. The display was made to combat issues of limited quantity of data being able to be displayed to the driver and its small readability was an issue, the display helped combat that by providing a greater quantity of data being able to be sent and displayed on the display and the information being displayed having …

Cost Modelling For Dimension Stone Quarry Operations, M. A. Raza, S. Raza, M. U. Khan, M. Z. Emad, K. Jalil, S. A. Saki

Mining Engineering Faculty Research & Creative Works

Dimension stone mining is Increasing because of growing demand from the building and construction industries. Diamond wire saw cutting is a popular dimension stone mining technique around the world. Estimation of the production cost for this method is critical for these operations. In this research a production cost model was developed for the mining of granite using a diamond wire saw. Cost and production data were collected from a granitic dolerite operation in Pakistan for a 4.5-year period and analyzed to identify the cost components. Fuel (34%), labor (15%), consumables (40%), and maintenance (5%) were found to be the four …

2023 - The Fourth Annual Fall Symposium Of Student Scholars

Symposium of Student Scholars Program Books

The full program book from the Fall 2023 Symposium of Student Scholars, held in November 2023. Includes abstracts from the presentations and posters.

Chain Conformation And Exciton Delocalization In A Push-Pull Conjugated Polymer, Yulong Zheng, Rahul Venkatesh, Connor P. Callaway, Campbell Viersen, Kehinde H. Fagbohungbe, Aaron L. Liu, Chad Risko, Elsa Reichmanis, Carlos Silva-AcuñA

UK CARES Faculty Publications

Linear and nonlinear optical line shapes reveal details of excitonic structure in polymer semiconductors. We implement absorption, photoluminescence, and transient absorption spectroscopies in DPP-DTT, an electron push−pull copolymer, to explore the relationship between their spectral line shapes and chain conformation, deduced from resonance Raman spectroscopy and from ab initio calculations. The viscosity of precursor polymer solutions before film casting displays a transition that suggests gel formation above a critical concentration. Upon crossing this viscosity deflection concentration, the line shape analysis of the absorption spectra within a photophysical aggregate model reveals a gradual increase in interchain excitonic coupling. We also observe …

Evaluation Of Residual Flexural Behavior Of Corroded Fiber-Reinforced Super Workable Concrete Beams, Jingjie Wei, Nima Farzadnia, Alfred Addai-Nimoh, Kamal Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This Study Investigates the Effect of Macro Synthetic Fiber (MSF) Volume and Crack Widths on Corrosion of the Reinforcing Bars and Residual Flexural Behavior of Fiber-Reinforced Super-Workable Concrete (FR-SWC) Beams Exposed to Accelerated Corrosion. FR-SWC Beams Prepared with 0, 0.33%, and 0.66% MSF Were Pre-Cracked at 0.2-, 0.4-, and 0.75-Mm Widths Before Corrosion Testing. the Controlled Crack Width Was Initiated in One Set of Beams that Were Then Unloaded. the Crack Width Was Maintained for Another Set of Beams during Corrosion Testing by Inserting a Shim. Test Results Showed that the Use of 0.33% and 0.66% MSF Reduced Crack Development …

Pedicle Screw Placement Accuracy In Robot-Assisted Spinal Fusion In A Multicenter Study, Victoria L. Volk, Keegan A. Steele, Mia Cinello‑Smith, Richard V. Chua, John Pollina, Gregory Poulter, Eiman Shafa, Peter Busselberg, Clare K. Fitzpatrick

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Pedicle screw fixation is a spinal fusion technique that involves the implantation of screws into vertebral pedicles to restrict movement between those vertebrae. The objective of this research is to measure pedicle screw placement accuracy using a novel automated measurement system that directly compares the implanted screw location to the planned target in all three anatomical views. Preoperative CT scans were used to plan the screw trajectories in 122 patients across four surgical centers. Postoperative scans were fused to the preoperative plan to quantify placement accuracy using an automated measurement algorithm. The mean medial–lateral and superior–inferior deviations in the pedicle …

Cement-Based Materials With Solid-Gel Phase Change Materials For Improving Energy Efficiency Of Building Envelope, Zhuo Liu, Jiang Du, Ryan Steere, Joshua P. Schlegel, Kamal Khayat, Weina Meng

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

This paper evaluated the cement-based materials incorporated with novel solid-gel phase change materials (PCMs) for improving the energy efficiency of building envelopes. This novel PCM is form-stable, which will not leak as solid-liquid PCMs do and not need encapsulation, and it features high energy-storage capacity. Experimental results showed that the thermal properties of cement-based materials were improved as the increase of PCM content. A 30% replacement of sand by volume with PCM can increase the latent heat of the mixture from around 0 to 7 J/g and decrease the thermal conductivity of PCM mortar based on the generalized self-consistent (GSC) …