Engineering Commons^™

Santa Clara Radio Astronomy Project (Scrap) V, Alejandro Hernandez, Agustin Garcia

Electrical and Computer Engineering Senior Theses

Santa Clara Radio Astronomy Project (SCRAP) V aims to develop an entirely operational, real-time platform software for an affordable radio telescope that can operate autonomously. This thesis describes the design and implementation process of the fifth generation project through concentrating on the following three key areas: the creation of the live data acquisition and visualization dashboard, thorough verification of the hardware chain received by us, and outdoor system protection from weather factors. The live data dashboard that was created in the MATLAB App Designer completely solved the architecture issues faced with its predecessor being the Python version of the system, …

Thermally Induced Color Changes In Iron Oxide Pigments Used In Architectural Coatings, Han Diep

Master's Theses

The 2025 Palisades Fire was one of the most destructive wildfires in the history of Los Angeles, destroying thousands of structures and severely impacting the communities after. This widespread destruction demonstrated an urgent need for more effective wildfire prevention strategies. Architectural coatings do not only provide aesthetics and protection against environmental conditions but can also function as a thermal indicator when a fire breaks out. This study examines the thermally induced color transformation of iron oxide pigments, commonly used in earthtone paint, to provide information relevant to CAL FIRE for improved analysis of wildland-urban interface (WUI) fire behavior and mitigation …

Restoreband: An Electromyography Band For Tracking Forearm Muscle Action And Activation In Post-Stroke Adults, Mairin T. Mullen, Melody Nwagwu, Kosuke Nishimura, Benjamin Miramon

Biomedical Engineering

This study involves the design of a non-invasive surface electromyography (EMG) band to estimate hand posture for individuals recovering from stroke and other neuromuscular disorders. The device is meant to measure forearm muscle activation to provide objective recovery data that can supplement traditional rehabilitation. Current EMG systems are often expensive, cumbersome, and difficult to use. The goal of this study is to develop an affordable, accurate, and easy to use solution that improves access to EMG motor monitoring.

The key stakeholders include stroke survivors, clinicians, and the project sponsor, Dr. Espinoza-Wade. This report includes project introduction, background, objectives, and project …

The Effects Of Adipose Tissue Trauma On Vascular Function After Collateral Arteriogenesis, Nathan Tran

Biomedical Engineering

Peripheral artery disease (PAD) affects an estimated 200 million people worldwide and is characterized by arterial narrowing that reduces perfusion to the limbs. Collateral arterioles can naturally restore blood flow through a remodeling process called arteriogenesis, making it a promising therapeutic target. However, the femoral artery ligation (FAL) model used to study arteriogenesis requires surgical access deep to the inguinal fat pad, and approaches for handling the fat pad vary widely across surgeons and protocols. Since adipose tissue harbors a large population of macrophages, the immune cells that govern arteriogenesis, fat pad manipulation may introduce confounding inflammatory stimuli that disrupt …

Del Miedo A La Ternura: Deconstrucción De Imaginarios Constitutivos De La Iag Para Imaginarla Como Una Tecnología Futura, Elizabeth Rodríguez Rendon

GDI. Revista de investigación de Género, Diseño e Innovación

El artículo propone una reflexión crítica a modo de ensayo sobre los imaginarios sociotécnicos que han configurado históricamente el desarrollo de la tecnología y, particularmente, de la Inteligencia Artificial Generativa (IAG). Se sostiene que la ciencia moderna occidental se estructuró a partir del miedo como afecto dominante, heredado de las tradiciones prometeica y fáustica, las cuales promovieron una relación con la técnica basada en el control, la dominación de la naturaleza y el rechazo de la finitud humana. Desde esta lógica, la tecnología ha sido imaginada como instrumento de poder, defensa y superioridad, reforzando narrativas de fascinación y temor frente …

A Novel Hexagonal-Zigzag Cellular Infill Structure For Additive Manufacturing, Md. Saidur R Roney, Amm Nazmul Ahsan, Prosenjit Barua

Manufacturing & Industrial Engineering Faculty Publications

The rigidity of the Additively Manufactured objects can be tailored by manipulating the infill lattice type and density. In this research, an island type novel infill structure termed as Hexagonal-Zigzag pattern is introduced, and its mechanical performance is investigated. In this pattern, the zigzag raster reflects the repeating hexagonal shaped cell constituting the parallel-oriented islands and 90° rotation of the pattern in each layer distributes the island span along both transverse and longitudinal directions of the printing contour. A mathematical model is established to illustrate the effect of the infill parameters on hexagon unit cell size and relative infill density. …

Recycling Aged Crumb Rubber-Modified Asphalt Pavements: A Review, Kwadwo Ampadu Boateng, Meng Wu, Dongzhao Jin, Zhanping You

Michigan Tech Publications

This study provides a comprehensive review of current progress and challenges in recycling crumb rubber-modified asphalt (CRMA) pavements. It examines key aspects, including mechanical performance, rejuvenation methods, chemical characterization, practical case studies, and environmental implications. Particular emphasis is given to the technical barriers that influence recyclability, such as the mix design for recycled mix, accounting for the combined aging of both the asphalt binder and the crumb rubber particles, and optimizing the rubber content alongside chemical interaction of rejuvenating agents. Existing research indicates that several traditional recycling practices, especially full-depth reclamation and hot central plant recycling, are generally suitable for …

A Near-Field Communication (Nfc) Multi-Sensor Node With Optimized Read Range And Adaptive Power Management For Remote Monitoring, Rishin Patra, Hilary Scott Nkimbeng Cho, Jin W. Choi

Michigan Tech Publications

This paper presents the design of a batteryless near-field communication (NFC) multi-sensor node with an integrated adaptive power-management system for sensing applications. The work focuses on harvesting energy from a 13.56 MHz NFC field to power an ultra-low power sensing platform. The design consists of the TI RF430FRL152H, an integrated NFC transponder with an embedded MSP430 microcontroller core and ferroelectric random-access memory (FRAM) non-volatile memory. The system combines an ISO/IEC 15693 NFC front end, a tuned loop antenna for optimized power harvesting, and multiple analog and digital sensor interfaces, and a firmware architecture for intermittent harvested energy operation. The aforementioned …

S-[2-(Hydroxyamino)-2-Oxoethyl]-O-Octyl-Dithiocarbonate Ester (Ehaox): Performance And Adsorption Mechanism, Yue Zhou, Jiaxiang Li, Hongli Fan, Zhilong Li, Yuesheng Gao, Tian Lin, Haiyan Tang, Tingting Wang, Wei Sun

Michigan Tech Publications

This study explores the interfacial interactions between a novel collector, S-[2-(hydroxyamino)-2-oxoethyl]-O-octyl-dithiocarbonate ester (EHAOX), and bastnaesite mineral surfaces during selective flotation. Compared to conventional octylhydroxamic acid (OHA), EHAOX demonstrated superior recovery, achieving an over 40% absolute increase in recovery compared to octylhydroxamic acid (OHA) at the same collector concentration (1 × 10⁻⁵ mol/L) and pH 8.0, and selectivity for bastnaesite, attributed to its optimized hydrophobicity (supported by CLogP calculations). Mechanistic studies via zeta potential, UV/vis spectroscopy, and FTIR revealed the formation of a complex composite via chemisorption between EHAOX and Ce³⁺ sites on the bastnaesite surface, with coordination occurring …

Eliminating Barriers For The Implementation Of Automation In The Mining Industry, Sefiu O. Adewuyi, Kray Luxbacher, Kanagy David, Miller Ben, Miller Hugh, Michael Moats, Savit Mark

Materials Science and Engineering Faculty Research & Creative Works

The integration of new technologies into U.S. mining operations is necessary for achieving continuous improvement in worker health and safety, as well as improving operational efficiency, but many have questioned why uptake of autonomy in the U.S. mining industry has been slow compared to other nations. Despite extensive research on mining automation, there remains a critical gap in understanding and systematically identifying the barriers to its adoption within the U.S. mining industry and globally. To quantify these barriers, a workshop model of data collection was employed. A total of 708 invitations were extended to professionals to participate in nine different …

Building And Facility Asset Inventory Assessment And Maintenance, Catherine Keathley, Bethany Paris, Jon Wilcoxson

Kentucky Transportation Center Research Report

The Kentucky Transportation Cabinet (KYTC) manages approximately 1,500 buildings statewide, including facilities such as office buildings, maintenance and equipment garages, and storage sheds. Because managing buildings and properties requires considerable effort, agency decision makers need reliable monitoring and management tools that generate and organize data which can be used to determine the best course of action for facility maintenance and replacement. In addition to assessing the Cabinet’s building inventory, this report advances recommendations to improve the collection, management, and reporting of facility-related data. Assessment of the inventory managed by KYTC included geolocation of all properties and the buildings therein. Once …

Kytc Crash Modification Factor Recommendation List Online Tool, William Staats, Reginald Souleyrette, Teng Alex Wang, Mohammad Zana Majidi

Kentucky Transportation Center Research Report

Transportation practitioners use crash modification factors/functions (CMFs) to calculate the number of crashes expected once a countermeasure has been implemented. When evaluating design alternatives, CMFs can be used in conjunction with safety performance functions (SPFs) to derive crash predictions. The Federal Highway Administration (FHWA) maintains the CMF Clearinghouse as a repository for CMFs. Contributions are submitted by researchers across the U.S., Canada, and throughout the world. Typically, individual countermeasures are associated with multiple CMFs. Some CMFs only apply to a specific facility or crash types. CMF quality varies, and some only apply to a specific facility and/or crash types, regions, …

Numerical Evaluation Of A Zero Poisson’S Ratio Structure In Μ-3d-Printed Self-Expanding Nitinol Stents, Farhana Yasmin, Ana Vafadar, Majid Tolouei-Rad

Research outputs 2022 to 2026

Stenting is a minimally invasive treatment used in managing peripheral artery disease (PAD). However, clinical challenges persist, including in-stent thrombosis and restenosis, primarily driven by axial foreshortening or elongation and suboptimal balance between radial stiffness and flexibility inherent to conventional stent designs. This study proposes an innovative arrow-shaped geometry exhibiting zero Poisson’s ratio (ZPR) behaviour for 3D-printed self-expanding Nitinol stents. The complete stent deployment process was modelled using finite element analysis (FEA), including radial crimping and subsequent expansion to enable systematic parametric investigation while accounting for µ-3D printing constraints. Response surface methodology (RSM) rigorously evaluated mechanical performance, defining peak stress, …

A Hybrid Mechano-Thermal Route To Synthesize Reactive Pozzolans From Clay Minerals: A Case Of Kaolinite, Oluwadamilare Charles Adesina, Bryan K. Aylas-Paredes, Brian R. Cherry, Luciano A. Gobbo, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Aluminosilicate resources from unconventional sources offer promising potential for developing low-carbon supplementary cementitious materials (SCMs), yet their activation typically requires energy-intensive thermal processing. Kaolinite is a geographically abundant and highly attractive precursor clay mineral to reduce the clinker factor in concrete. By integrating mechano- and thermo- chemistry sequentially in a novel hybrid mechano-thermal activation (MTA) strategy for clay mineral activation, the dehydroxylation of pure kaolinite polymorphs KGa-1b and KGa-2 for enhanced pozzolanic reactivity is unlocked at temperatures that are lower than those needed for conventional thermal activation (TA). The mechano-chemical activation (MCA) step that induces significant structural defects and disorder …

Nanobubble Flotation Strategy Of Fluorite Integrating Experimental And Dft Analysis, Ahmed Sobhy, Hadeer El-Shamy, Nourhan Ahmed, Mohsen Farahat

Mining Engineering Faculty Research & Creative Works

The conventional froth flotation of fluorite from quartz-rich ores is reagent-intensive and faces selectivity challenges, impacting its economic and environmental sustainability. This study presents a novel green intensification strategy through the synergistic integration of nanobubble (NB) technology with Density Functional Theory (DFT) simulations. Systematic optimization of sodium oleate (collector) and sodium silicate (depressant) dosages in conjunction with hydrodynamic parameters (air/wash water velocity, NB generation rate) was conducted in both mechanical and column flotation systems. The incorporation of nanobubbles yielded transformative improvements: in mechanical flotation, collector and depressant consumption were reduced by over 50% while maintaining a concentrate grade exceeding 90% …

Creating A Framework For Quantifying Wildland Urban Interface (Wui) Fire Vulnerability Factors, Ryan L. Delalio

Construction Management

Wildfires have been the focus of geospatial research for decades. Climate change and increased suburban development in California are leading to an increase of Wildland Urban Interface (WUI). These zones are at higher wildfire risk, and a metric is needed to determine the most vulnerable communities to help them assess their personal wildfire risk. By analyzing current WUI wildfire vulnerability literature, the main contributing factors behind the impact of wildfires in California emerge. These factors are then paired with datasets that contain geospatial information about the factors to help us find the locations of highest vulnerability. This paper serves as …

Skip The Grid: Bringing Photovoltaic Energy To The Navajo And Hopi Nations, Emily Edmondson

Construction Management

Skip the Grid is an interdisciplinary service-learning initiative that provides off-grid solar energy systems to households within the Navajo and Hopi Nations that lack access to electricity. In March 2026, students from five academic disciplines at California Polytechnic State University partnered with industry professionals and community organizations to complete the fifth annual installation trip. The project's purpose was to improve quality of life by providing reliable access to lighting, refrigeration, and small-scale electrical power in underserved communities where traditional grid expansion is extremely costly. Preparation for the project included fundraising, procurement, technical training, and coordination among multiple stakeholders. Participants were …

Skip The Grid: Bringing Renewable Energy To Off-Grid Navajo Homes, Zion Hall

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the fifth year of the program. The project's purpose was to improve quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry …

How Modular Construction Techniques Can Be Beneficial To The Nuclear Construction Industry, Samuel Lawrence Maurer

Construction Management

Nuclear energy will soon be needed to supply sustainable and clean power to companies that work with Artificial Intelligence and Quantum Computing. Across the world, lots of large-scale nuclear power plants that have been recently constructed have had many issues, such as cost overruns, schedule delays, permitting issues, and more. The purpose of this project is to examine how modular construction, specifically in the form of Small Modular Reactors (SMRs), can positively impact the nuclear construction industry and potentially reduce some of the common issues that these large-scale nuclear power plant projects typically face. The findings suggest that the use …

International Construction In El Salvador, Daniel Roberts

Construction Management

My senior project focused on participating in international construction operations in El Salvador through hands-on involvement in the construction of a steel warehouse facility and a small residential home. The project emphasized structural concrete placement, field coordination, construction sequencing, and adaptation to regional construction practices. Work included assisting with concrete foundations, slab preparation, reinforcing steel placement, masonry work, and general site coordination activities. The experience provided practical exposure to labor productivity, material availability, scheduling challenges, and construction methods commonly used in developing regions. The project also highlighted the importance of communication, problem-solving, and flexibility when working in an international construction …

Economic Feasibility Of 3d-Printed Concrete Walls Vs. Traditional Framing Systems, David Hawk

Construction Management

The construction industry faces mounting pressure to adopt more efficient building technologies. 3D-printed concrete (3DCP) has emerged as a promising alternative to wood-frame wall systems, offering reduced labor costs, shorter schedules, and lower long-term maintenance expenses. This study evaluates the economic feasibility of 3DCP versus traditional framing across three project scales — single-family (2K SF), multifamily (20K SF), and large development (100K SF) — using mixed-methods combining quantitative cost data with qualitative industry interviews. Results indicate 3DCP becomes cost-competitive at approximately 20,000 SF of wall area, with a decisive advantage at 100K+ SF ($26–$34/SF vs. $29–$45/SF traditional). Equipment mobilization ($8–$18/SF) …

Skip The Grid: Installing Solar Systems In The Navajo Nation, Joey Massey

Construction Management

Skip the Grid is a student led interdisciplinary project that aims to bring sustainable solar energy to families in the Navajo Nation who lack reliable power at home. The 2026 Skip the Grid trip was the fifth consecutive year of the joint effort between California Polytechnic State University (Cal Poly) students across multiple departments, Heart of America (HOA), SOLV Energy, and Nextpower. Over the three working days the 5 teams installed Goal Zero Solar Systems in 50 homes on both the Navajo Nation and Hopi Reservation. These systems brough power, light, and refrigeration to families, enhancing their quality of life …

Greek Row At Cal Poly: Addressing Student Housing, Neighborhood Conflict, And Town-Gown Relations, Christopher Linn Green

Construction Management

This study evaluates whether centralized Greek housing near Cal Poly could serve as a long-term planning solution for reducing neighborhood conflict, improving student housing opportunities, and creating a more organized environment for fraternity and sorority life. The research was developed in response to ongoing concerns in San Luis Obispo involving student housing pressure, fraternity activity in residential neighborhoods, and code enforcement challenges. Two surveys were used to gather stakeholder perspectives. One survey of Cal Poly students and one survey of individuals who work in San Luis Obispo. Student responses showed strong support for a centralized Greek Row, with most respondents …

Skip The Grid: Providing Solar Energy To Navajo And Hopi Families, Derrick Huang

Construction Management

In Spring 2026, the Skip the Grid program sent its 5^th consecutive service project team to the Navajo Nation. Consisting of 4 faculty and 23 interdisciplinary students from various majors such as Construction Management, Mechanical Engineering, Environmental Management, and more, the California Polytechnic State University, San Luis Obispo (Cal Poly) team partnered with non-profit Heart of America, SOLV Energy, and NextPower to install Two 200-watt PV panels, a Yeti 1500X battery, a refrigerator, and two LED lights to families in the Navajo and Hopi Nations in Northeastern Arizona. Within 3 installation days, the Skip the Grid team was able …

Improving The California Boulevard Railroad Underpass: A Feasibility Study Of Persistent Barriers And Practical Improvement Strategies, Jacee D. Carpenter

Construction Management

The California Boulevard railroad underpass in San Luis Obispo has served as an informal pedestrian route for Cal Poly students since pedestrian access across the adjacent railroad tracks was restricted in 2009. Despite its frequent use, the underpass presents challenges related to lighting, drainage, surface conditions, and seasonal flooding that affect safety and accessibility. Previous studies documented these concerns and proposed improvement concepts; however, no significant physical improvements have been implemented. This project evaluates the factors contributing to the lack of improvements and examines practical strategies for enhancing the underpass within existing regulatory, environmental, and jurisdictional constraints. Methods included a …

Skip The Grid 2026: Off-Grid Power For Hopi And Navajo Families, Xanthus Aurelius Poole Silverstein

Construction Management

Skip the Grid is an interdisciplinary service-learning project that provides sustainable energy solutions to families with school-aged children living in the Navajo and Hopi Nations. In March 2026, a team of 23 students from five academic disciplines at California Polytechnic State University (Cal Poly) partnered with Heart of America, SOLV Energy, and NextPower to complete the fifth year of the program. The project's purpose was to improve quality of life and support educational success by providing reliable access to electricity, lighting, and refrigeration in underserved communities. Participants were organized into five installation teams consisting of Cal Poly students, faculty, industry …

Sheep Pen Improvements At City Farm Slo, Diego Eliseo Romero

Construction Management

City Farm SLO is a non-profit educational farm that focuses on creating clean produce and educational farm work environments in San Luis Obispo, California. The farm can provide its community with learning programs for the youth, hands-on experience in farming practices, and livestock care. The work was set out for this project across two quarters where we improved the existing sheep pen so that the volunteers and livestock who use the pen can enjoy the area much more comfortably and safely. The overall project scope included several improvements which all required initial designs, coordination with the farm and its volunteers, …

City Farm Slo Sheep Pen Improvements, Oscar Rocha

Construction Management

City Farm SLO is a non-profit that focuses on educating under-served and at-risk youth on health, success, and environmental responsibilities. The organization’s mission is accomplished while connecting many people from different backgrounds, which include diverse ethnic, racial, and socio-economic backgrounds. City Farm SLO promotes hands-on learning, providing opportunities for Cal Poly Construction Management students to build on the farm. This senior project consists of the construction of a 50 cubic yards sheep hill, vehicle access gates, side entry gate, front catch pen, and back corral fencing. Outside of the field construction, there was extensive planning to coordinate with the farm’s …

U.S. Army Corps Of Engineers Information Session At California Polytechnic State University, Jack Durham Abernathy

Construction Management

This paper presents a detailed analysis of an information session coordinated by Jack Abernathy with the United States Army Corps of Engineers (USACE) on May 14, 2026, at California Polytechnic State University San Luis Obispo. An Army Corps of Engineers info session creates a critical step for undergraduates where they have a professional environment to network with industry professionals and explore unique career paths that may have not been previously considered. The presentation exposed attendees to the history of the Corps of Engineers, employee occupations, and USACE’s varying mission sets. A representative from the USACE Sacramento District brought forward professional …

The Effect Of Music On Construction Labor Productivity, Ayush Khare

Construction Management

Every day the construction industry is looking for ways to improve labor productivity, jobsite morale, and overall project efficiency. Contractors often focus on larger strategies such as scheduling, manpower planning, equipment selection, and material coordination to help projects stay on time and within budget. However, smaller jobsite conditions can also affect how workers perform throughout the day. Music is one of these conditions. On many construction sites, music is already used informally by laborers while they complete physical and repetitive tasks. Even though music is common in construction culture, its effect on productivity and morale is not often measured or …