Engineering Commons^™

A Review On Additive Manufacturing For Aerospace Application, Radhika C, Ragavanantham Shanmugam, Monsuru Ramoni, Gnanavel Bk

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing, a cutting-edge technology often colloquially known as 3D printing, is a transformative process used to meticulously fabricate complex components by adding material layer upon layer. This revolutionary manufacturing method allows for precise control and customization, making it a go-to choice in various industries, from aerospace to healthcare. The adroitness of additive manufacturing in creating a complex geometry as a whole is very much harnessed by the aerospace Industry. Generating a component using additive manufacturing involves optimal design, methods, and processes. This review gives a broad knowledge in developing a part or product by choosing the appropriate design, method, …

A Comparative-Analytical Based Approach To Improve Energy Efficiency In Office Buildings, Ahmed Mohamed Thabet Alieldin, Raghda Abdelwahab Othman

Mansoura Engineering Journal

Green Building Rating Systems (GBRSs) have spread worldwide to evaluate how buildings are related to sustainability criteria. On one hand, leadership in Energy and Environmental Design [1] was recognized to be one of the most prominent rating systems in all over the world. LEED gives importance to the energy category by giving it the highest weighting score. On the other hand, the Egyptian Green Pyramid Rating System (GPRS) has been established to expand the construction of green buildings in Egypt. The governmental codes, policies and strategies in Egypt play the main role in improving several codes in the …

Modelling Of A Drone To Analyze Dynamic Instabilities With Its Delivery System, Eleazar Marquez, Ivan Luna

Mechanical Engineering Faculty Publications

In the study herein, an alternative mathematical model was developed with the intention of understanding the dynamics associated with the instabilities generated by an UAV and its delivery system, particularly the coupled nonlinearities of the system, and thus provide feedback to optimize drone design. In this regard, a Newton-Euler methodology was adopted to establish the parameters of the equations of motion of the target UAV system, which consisted of a combination of a platform and delivery system operating simultaneously. Specifically, the UAV platform was modelled as a rigid body which accounted for a total of six-degrees-of-freedom, three corresponding to the …

In-Situ Shear Exfoliation Of Graphene From Graphite Polymer Nanocomposites For Lung And Heart Motion, Md Ashiqur Rahman, Md Abdur Rahman Bin Abdus Salam, Ali Ashraf

Mechanical Engineering Faculty Publications

Graphene-based nanocomposites have become attractive for different applications such as energy storage, sensors, biomolecule detection, biomedical, healthcare, and wearable devices due to their unique mechanical, electrical, and thermal properties. However, using commercial graphene for making nanocomposite devices can be expensive, and fabricating nanocomposites can be challenging due to impurities while transferring graphene to elastomer composites. In this study, we used a simple, inexpensive in-situ shear exfoliation method to produce graphene from graphite directly within the elastomer. As the graphene in the elastomer reached beyond its percolation or threshold, electrons hop or tunnel around from one graphene flake to another. So, …

Reduced Order Model Of Parametric Resonance Of Electrostatically Actuated Cantilever Resonators: Comparison Uniform Versus Non-Uniform Resonators, Dumitru I. Caruntu, Rigoberto Flores

Mechanical Engineering Faculty Publications

A comparison of the frequency-amplitude and voltage-amplitude responses of parametric resonance between electrostatically actuated uniform and non-uniform cantilever resonator is conducted. The non-uniform cantilever resonator has constant width and linearly varying thickness. Both microstructures uniform and non-uniform are under soft AC electrostatic actuation. Two Reduced Order Models for predicting the responses of the MEMS cantilever are used in this paper, namely one using one mode of vibration, and another one using two modes of vibration. The Method of Multiple Scales is used to solve the Reduced Order Model with one mode of vibration. A second method is a direct numerical …

Maximizing Charge Dynamics In Znin2s4/Cn Van Der Waals Heterojunction For Optimal Hydrogen Production From Photoreforming Of Glucose, Jinqiang Zhang, Xinyuan Xu, Lei Shi, Huayang Zhang, Shaobin Wang, Hongqi Sun

Research outputs 2022 to 2026

Biomass photoreforming stands out as a promising avenue for green hydrogen, leveraging solar energy for the generation and transformation of clean and renewable energy resources. The pursuit of efficient photocatalysts is motivated by the unsatisfied hydrogen evolution performance arising from the complex and stubborn structure of biomass. Herein, we loaded 2-dimensional (2D) ZnIn2S4 onto 2D carbon nitride nanosheets, resulting in the formation of Van der Waals (VDW) heterojunctions (ZIS/CN). Band structure and morphology of CN were rationally tailored through precursor engineering to effectively magnify interfacial internal electric field and minimize diffusion pathway within the VDW heterostructure, realizing optimal charge dynamics …

Effect Of Foot Additional Mass On The Clinical Angles Of Knee Extension Exercise, Dumitru I. Caruntu, Alfirio Trejo, Eric Rodriguez, Camila T. Alvarez B

Mechanical Engineering Faculty Publications

This study investigates the effect of foot additional mass on the abduction and internal rotation knee angles during knee extension exercise. Three subjects (two male and one female) performed four sets of ten repetitions of the knee extension exercise for the right leg. For the first set, the subject performed the exercise with no additional weight. For each set after, weight was added around the subject’s right foot and the subject was allowed a rest period before beginning the next set. The weights for sets 1, 2, 3, and 4 were 0.00kg (no additional weight) ,0.82kg, 1.64kg, and 2.27kg respectively. …

Graphene Reinforced Pvdf Nanofibers Fabricated With The Forcespinning® Method For Water Desalination Applications, Elmmer A. Vera Alvarado, Md. Abdur Rahman Bin Abdus Salam, Ali Ashraf, Karen Lozano

Mechanical Engineering Faculty Publications

Direct contact membrane distillation (DCMD) is a thermally driven energy and cost-efficient desalination technique where low-grade energy from solar or waste heat from plants can be used to recover fresh water from high saline water. The DCMD technique allows both the feed and permeate solutions to be in contact with the membrane, where vapor from the feed gets condensed in the permeate side once it collides with low- temperature water. Polyvinylidene fluoride (PVDF) nanofiber membranes were prepared by the ForceSpinning® method, these were later dip coated in graphene solutions prepared with different solvents. The ForceSpinning® method, unlike electrospinning, operates in …

Predicting Oscillatory Patterns Of Mud Circulating Along The Well-Bore In Drilling Procedures: A Finite Element Model, Eleazar Marquez

Mechanical Engineering Faculty Publications

In this paper, a mathematical model is proposed to further understand the dynamic effects [drilling] mud exerts on the drill-string assembly. The proposed model consists of a rotor subjected to various revolutions per minute (RPM’s), an axial force which accounts for the weight-on bit requirements, and a harmonic excitation simulating fluid mud circulating along the well-bore. In this regard, Euler-Bernoulli beam theory is incorporated to establish a multi-degree-of-freedom (MDOF) mathematical expression of a specific section of the BHA. In this regard, a finite element methodology was implemented to determine the corresponding parameters of the equation of motion and elucidate the …

Effect Of Eis In A 3d Printed Non-Planer Array Patterned Microfluidic Devices, Shanzida Kabir, Hector Zepeda Saenz, Nazmul Islam

Electrical and Computer Engineering Faculty Publications

In recent years 3D printing is becoming popular among researchers for its reliability, cost-effective materials, and ease of use without having costly clean rooms. In this work we report the process of fabrication of an array patterned microfluidic device with its effect in Electrochemical impedance spectroscopy (EIS) and particle manipulator. With the optimized design of channel geometry and electrode pattern, this device can use in different lab-on-a-chip applications. A 3D printed microfluidic channel fabrication process is presented here along with a CAD drawing with microstructural dimension analysis. EIS is an expeditiously developing method used in characterizing materials and interfaces. By …

Wearable Mxene-Graphene Sensing Of Influenza And Sars-Cov-2 Virus In Air And Breath: From Lab To Clinic, Yanxiao Li, Zhekun Peng, Jiaoli Li, Congjie Wei, Shangbin Liu, Weixing Hao, Huanyu Cheng, Casey Burton, Yang Wang, Yue-Wern Huang, Chang Soo Kim, Fang Yao Stephen Hou, Donghyun (Bill) Kim, Chenglin Wu

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rapidly expanding severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its variants demand a continuous monitoring method through portable and wearable devices. Utilizing the rich surface chemistry and high chemical-to-electrical signal conversion of 2D MXene-graphene heterostructure thin films, a field-effect-transistor (FET) sensor, which has a flexible substrate to be assembled onto the mask and combines with a Bluetooth system for wireless transmission is developed, to detect the influenza and SARS-CoV-2 viruses in air and breath. At first, the developed sensors are examined in the laboratory through direct contact with sensing targets in solution form. The results show a low …

Progress In Energy: Usa–Canada Special Issue On Energy, Yun Hang Hu

Michigan Tech Publications

No abstract provided.

Assessing The Lubrication Performance Of Sunflower Oil Modified With Montmorillonite Clay (Mmt) Nanoparticles For Industrial Applications, Md Mashfiqur Rahman, Md Abu Sayeed Biswas, Laura Peña-Pará, Demófilo Maldonado- Cortés, Javier A. Ortega

Mechanical Engineering Faculty Publications

Because of the environmental impact and price volatility, there has been a growing concern about using petroleum-based lubricants. This issue has encouraged research into the development of biodegradable lubricants like vegetable oils. This study assessed the tribological behavior of sunflower oil modified with Montmorillonite nanoclay (MMT) as lubricant additives. A block-on-ring tribometer was used to assess the wear and friction characteristics of the nano-lubricants. A custom-made tapping torque tester was used to evaluate the nano-lubricants in a real-world application. It was found that the volumetric wear, Coefficient of Friction, and torque of the system decreased when MMT nanoparticles were added. …

Identifying Sick Cells From High-Resolution Solid-State Micropore Data, Abdul Hafeez, Azhar Ilyas, Ali R. Butt, Samir M. Iqbal

Mechanical Engineering Faculty Publications

Early detection of diseases such as cancer can drastically improve prognosis and treatment. To this end, solid-state micropores can measure distinct mechanical properties of diseased cells from their translocation behavior — detected as pulses in the temporal data stream of ionic current — and help diagnose diseases at early stages. However, the obstacle in such approaches is that the accuracy of the sensor is affected by noise, making the pulse detection task too subjective. This is inefficient especially when the disease-relevant data is only a fraction of the total acquired data. Thus, it is important to intelligently automate the detection …

Room Temperature Polaritonic Soft-Spin Xy Hamiltonian In Organic–Inorganic Halide Perovskites, Kai Peng, Wei Li, Natalia G. Berloff, Xiang Zhang, Wei Bao

Department of Electrical and Computer Engineering: Faculty Publications

Exciton–polariton condensates, due to their nonlinear and coherent characteristics, have been employed to construct spin Hamiltonian lattices for potentially studying spin glass, critical dephasing, and even solving optimization problems. Here, we report the room-temperature polariton condensation and polaritonic soft-spin XY Hamiltonian lattices in an organic–inorganic halide perovskite microcavity. This is achieved through the direct integration of highquality single-crystal samples within the cavity. The ferromagnetic and antiferromagnetic couplings in both one- and two-dimensional condensate lattices have been observed clearly. Our work shows a nonlinear organic–inorganic hybrid perovskite platform for future investigations as polariton simulators.

High-Yield And Rapid Isolation Of Extracellular Vesicles By Flocculation Via Orbital Acoustic Trapping: Float, Joseph Rufo, Peiran Zhang, Zeyu Wang, Yuyang Gu, Kaichun Yang, Joseph Rich, Chuyi Chen, Ruoyu Zhong, Ke Jin, Je He, Jianping Xia, Ke Li, Jiarong Wu, Yingshi Ouyang, Yoel Sadovsky, Luke P. Lee, Tony Jun Huang

Faculty Publications

Extracellular vesicles (EVs) have been identified as promising biomarkers for the noninvasive diagnosis of various diseases. However, challenges in separating EVs from soluble proteins have resulted in variable EV recovery rates and low purities. Here, we report a high-yield ( > 90%) and rapid ( <  10 min) EV isolation method called FLocculation via Orbital Acoustic Trapping (FLOAT). The FLOAT approach utilizes an acoustofluidic droplet centrifuge to rotate and controllably heat liquid droplets. By adding a thermoresponsive polymer flocculant, nanoparticles as small as 20 nm can be rapidly and selectively concentrated at the center of the droplet. We demonstrate the ability of FLOAT to separate urinary EVs from the highly abundant Tamm-Horsfall protein, addressing a significant obstacle in the development of EV-based liquid biopsies. Due to its high-yield nature, FLOAT reduces biofluid starting volume requirements by a factor of 100 (from 20 mL to 200 µL), demonstrating its promising potential in point-of-care diagnostics.

Fair Fault-Tolerant Approach For Access Point Failures In Networked Control System Greenhouses, Mohammed Ali Yaslam Ba Humaish

Theses and Dissertations

Greenhouse Networked Control Systems (NCS) are popular applications in modern agriculture due to their ability to monitor and control various environmental factors that can affect crop growth and quality. However, designing and operating a greenhouse in the context of NCS could be challenging due to the need for highly available and cost-efficient systems. This thesis presents a design methodology for greenhouse NCS that addresses these challenges, offering a framework to optimize crop productivity, minimize costs, and improve system availability and reliability. It contributes several innovations to the field of greenhouse NCS design. For example, it recommends using the 2.4GHz frequency …

Degradation Of The Mechanical Properties And Hydrogen Generation In Cement Under Gamma Irradiation Assessed By Atomistic Simulation, Omar Al Najjar

Theses and Dissertations

Although understanding the effect of the gamma-ray on cement-based materials is essential for many applications, such as the concrete contaminate of nuclear reactors or the storage of radioactive waste in cement-based waste forms, such understanding is still not fully developed. The importance of having such an understanding is becoming of utmost importance, especially with calls to extend the lifetime of nuclear power plants, and also due to some recent incidents of failures of the concrete structure in the nuclear fields. In this work, the details of preparing three molecular models as a representative structure of the main binding phase of …

Fatigue Characteristics Of Steel–Concrete Composite Beams, Ayman El-Zohairy, Hani Salim, Hesham Shaaban, Mahmoud T. Nawar

Faculty Publications

Fatigue in steel–concrete composite beams can result from cyclic loading, causing stress fluctuations that may lead to cumulative damage and eventual failure over an extended period. In this paper, the experimental findings from fatigue loading tests on composite beams with various arrangements are presented. Fatigue tests were performed up to 1,000,000 cycles using four-point loading, encompassing various ranges of shear stress at a consistent amplitude. Additionally, the effects of external post-tensioning and the strength of the shear connection were investigated. Static tests were run until failure to assess the enduring strength of the specimens subjected to fatigue. The cyclic mid-span …

Systemization & Survival -- “Houston, We Have A Problem” – Business Lessons From Apollo 13, Judith Jacob Iddy, Njeru Zakayo

Markets, Globalization & Development Review

In the business world, there are different factors that determine whether a business will survive or not. Apollo 13 film perfectly demonstrates what every business undergoes throughout its lifecycle. Apollo 13 spacecraft started its journey to the moon successfully with the mission being to land on the moon. Unfortunately, within a very short period of time, Apollo 13 started to experience a series of problems that required quick actions and decisions to be made with the involvement of different sets of technical skills. Ultimately, by using the prototype and systems which NASA had established for Apollo 13, the teams managed …

The Santa Clara, 2024-02-02, Santa Clara University

The Santa Clara

No abstract provided.

Point-Of-Care Diagnostic Test For Beta-Thalassemia, Ran An, Umut A. Gurkan

Faculty Scholarship

Hemoglobin (Hb) disorders are among the most common monogenic diseases affecting nearly 7% of the world population. Among various Hb disorders, approximately 1.5% of the world population carries β-thalassemia (β-Thal), affecting 40,000 newborns every year. Early screening and a timely diagnosis are essential for β-thalassemia patients for the prevention and management of later clinical complications. However, in Africa, Southern Europe, the Middle East, and Southeast Asia, where β-thalassemia is most prevalent, the diagnosis and screening for β-thalassemia are still challenging due to the cost and logistical burden of laboratory diagnostic tests. Here, we present Gazelle, which is a paper-based microchip …

Left Ventricle Function And Post-Transcriptional Events With Exercise Training In Pigs, Stephanie L. Samani, Shayne C. Barlow, Lisa A. Freeburg, Traci L. Jones, Marlee Poole, Mark A. Sarzynski Ph.D., Faha, Facsm, Michael R. Zile, Tarek Shazly, Francis G. Spinale

Faculty Publications

Background

Standardized exercise protocols have been shown to improve overall cardiovascular fitness, but direct effects on left ventricular (LV) function, particularly diastolic function and relation to post-transcriptional molecular pathways (microRNAs (miRs)) are poorly understood. This project tested the central hypothesis that adaptive LV remodeling resulting from a large animal exercise training protocol, would be directly associated with specific miRs responsible for regulating pathways relevant to LV myocardial stiffness and geometry.

Methods and results

Pigs (n = 9; 25 Kg) underwent a 4 week exercise training protocol (10 degrees elevation, 2.5 mph, 10 min, 5 days/week) whereby LV chamber stiffness (KC) …

Performance Analysis And Evaluation Of Image Processing Techniques, Dcnn And Bsn Model For Detection And Classification Of Diabetic Retinopathy, Sudha S

Theses and Dissertations

Diabetes is a disorder that arises when blood sugar level increases. Insufficient secretion of insulin hormone is the ground for the evolution of diabetes, and it affects most of the critical organs in our body. Diabetes causes leakage of blood in the retinal blood vessels, inducing an eye disease, Diabetic Retinopathy (DR). The visual identification of micro features in fundus images makes the clinicians complex and challenging tasks. Therefore, timely diagnosis and proper treatment can prevent eye blindness. This research is proposed to identify and classify diabetic retinopathy using an Image Processing technique, Deep Convolutional Neural Network (DCNN), Biological Sensor …

Understanding Roles And Evaluating Reactivity Of Fly Ashes In Calcium Aluminate Binders, Sai Akshay Ponduru, Taihao Han, Jie Huang, Narayanan Neithalath, Gaurav Sant, Aditya Kumar

Electrical and Computer Engineering Faculty Research & Creative Works

Calcium aluminate cement (CAC) is an alternative to Portland cement, valued for its superior early strength and thermal resistance. Partially replacing CAC with Fly ash (FA) can reduce carbon footprint and production costs of CAC, producing sustainable cementitious binders. This research investigates on various properties (i.e., hydration kinetics; phase assemblage evolution; compressive strength) of [CAC + FA] binders. Using 13 distinct FAs, up to 50% of CAC was substituted. The study measures hydration kinetics, compressive strength, and employs the number of constraints to estimate FA reactivity. Advanced quantitative analysis draws links between hydration kinetics and compressive strength and elucidate the …

Left Ventricle Function And Post-Transcriptional Events With Exercise Training In Pigs, Stephanie L. Samani, Shayne C. Barlow, Lisa A. Freeburg, Traci L. Jones, Marlee Poole, Mark A. Sarzynski Facsm, Michael R. Zile, Tarek Shazly, Francis G. Spinale

Faculty Publications

Background

Standardized exercise protocols have been shown to improve overall cardiovascular fitness, but direct effects on left ventricular (LV) function, particularly diastolic function and relation to post-transcriptional molecular pathways (microRNAs (miRs)) are poorly understood. This project tested the central hypothesis that adaptive LV remodeling resulting from a large animal exercise training protocol, would be directly associated with specific miRs responsible for regulating pathways relevant to LV myocardial stiffness and geometry.

Methods and results

Pigs (n = 9; 25 Kg) underwent a 4 week exercise training protocol (10 degrees elevation, 2.5 mph, 10 min, 5 days/week) whereby LV chamber stiffness (KC) …

Synergistic Effect Of Macro Synthetic Fiber And Shrinkage-Reducing Admixture On Engineering Properties Of Fiber-Reinforced Super-Workable Concrete, Jingjie Wei, Nima Farzadnia, Kamal H. Khayat

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This study aims to enhance fiber-reinforced super-workable concrete (FR-SWC) by optimizing the system of shrinkage-reducing admixture (SRA) and macro-synthetic fiber (MSF) for low shrinkage and uncompromised mechanical properties. A factorial design approach was employed to model the effect of fiber content, SRA dosage, and combined ratios of two types of MSF on performance of FR-SWC. MSF content had the greatest impact on mechanical properties, followed by SRA and MSF combination. Using MSF increased equivalent flexural strength ratio by 310% compared to the control mixture, regardless of MSF combination and SRA. SRA had the most significant effect on drying shrinkage, followed …

From Pumping To Deposition: A Comprehensive Review Of Test Methods For Characterizing Concrete Printability, Ali Fasihi, Nicolas A. (Ali) Libre

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

3D concrete printing (3DCP) technology has gained significant attention in the construction industry due to its potential to revolutionize the way buildings are designed and constructed. However, successful application of 3DCP requires robust standard test procedures to characterize the printability of concrete. Printability is a measure of workability for a printing material in the 3DCP process, which is characterized by pumpability, extrudability, and buildability. This paper presents a comprehensive review of the test methods that could be used for material characterization during various printing steps, including pumping, extrusion, and layer deposition. The underlying mechanisms relevant to each step, key governing …

Analysis Of The Impact Of Water Treatment By Liming Sedimentation And Dredging On The Content Of Heavy Metals In Fish Intended For Consumption, Asfie Maidie, Ismail Fahmy Almadi, Muchlis Efendi, Rekha Yusdha Nilawardhani, Komsanah Sukarti, Henny Pagoray

Journal of Sustainable Mining

The present study sought to determine the presence of metals and arsenic, a metalloid, among the fish of a coal mine reservoir, where the water was treated regularly through liming sedimentation combined with dredging, and the fish living in an adjoining river. The potential hazard of metals in fish as human food was analyzed. Except for selenium (an important metal to the human body), which was higher among the river fish than in the reservoir fish (P < 0.01), there were no particular patterns of other studied metals found in either habitat (P > 0.05), and apparently not related to the fish family that consumed by local people. Measurements of bioaccumulation factor (BAF) yielded scattered values from …

Geodetic Strain Rates For The 2022 Update Of The New Zealand National Seismic Hazard Model, Jeremy Maurer, Kaj Johnson, Laura M. Wallace, Ian Hamling, Charles A. Williams, Chris Rollins, Matt Gerstenberger, Russ Van Dissen

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Geodetic data in plate boundary zones reflect the accrual of tectonic strain and stress, which will ultimately be released in earthquakes, and so they can provide valuable insights into future seismic hazards. To incorporate geodetic measurements of contemporary deformation into the 2022 revision of the New Zealand National Seismic Hazard Model 2022 (NZ NSHM 2022), we derive a range of strain-rate models from published interseismic Global Navigation Satellite Systems velocities for New Zealand. We calculate the uncertainty in strain rate excluding strain from the Taupō rift–Havre trough and Hikurangi subduction zone, which are handled separately, and the corresponding moment rates. …