Engineering Commons^™

Modeling The Human Learning Process Using An Industrial Steam Boiler Analogy To Design A Psychophysiological-Based Hypermedia Adaptive Automation System, Liliana María Villavicencio López

USF Tampa Graduate Theses and Dissertations

This dissertation aims to address the existing gap in the integration of various dimensions within the student learning system, encompassing cognitive, emotional, and physical variables. The primary objective is to construct a Personalized Learning Adaptive Automation model using Electroencephalography (EEG) technology.

To provide deeper insight into the intricate nature of the Human Learning Process, this study introduces a novel analogy with an Industrial Steam Boiler. This analogy serves as a distinctive contribution to research in the field.

The research methodology involved the collection of brainwaves data from engineering students while they undertook educational tasks of varying levels of difficulty, categorized …

Achieving Room Temperature Plasticity In Brittle Ceramics Through Elevated Temperature Preloading, Chao Shen, Jin Li, Tongjun Niu, Jaehun Cho, Zhongxia Shang, Yifan Zhang, Anyu Shang, Bo Yang, Ke Xu, R. Edwin Garcia, Haiyan Wang, Xinghang Zhang

Purdue University Libraries Open Access Publishing Fund

Ceramic materials with high strength and chemical inertness are widely used as engineering materials. However, the brittle nature limits their applications as fracture occurs before the onset of plastic yielding. There has been limited success despite extensive efforts to enhance the deformability of ceramics. Here we report a method for enhancing the room temperature plastic deformability of ceramics by artificially introducing abundant defects into the materials via preloading at elevated temperatures. After the preloading treatment, single crystal (SC) TiO2 exhibited a substantial increase in deformability, achieving 10% strain at room temperature. SC α-Al2O3 also showed plastic deformability, 6 to 7.5% …

Wireless Insights Into Cognitive Wellness: A Paradigm Shift In Alzheimer’S Detection Through Ultrathin Wearable Antennas, Fatma Taher, Moath Alathbah, M. Abdel-Aleim M., Thamer Alghamdi, Mohamed Fathy Abo Sree, Sara Yehia Abdel Fatah

All Works

The Proposed algorithm, designed to simulate an Alzheimer’s disease (AD) brain model across different stages, presents an invaluable opportunity for further research and in-depth study of the effects of AD. Currently, there is a notable absence of a comprehensive simulated model for the AD brain that allows the exploration of all AD biomarkers within a simulation tool. This represents a crucial advancement in the field, enabling researchers to thoroughly investigate and understand the diverse biomarkers associated with AD without resorting to highly expensive and ionizing radiation techniques. The algorithm’s capability to emulate various stages of AD in a simulated environment …

Nanozyme-Based Sensing Of Dopamine Using Cobalt-Doped Hydroxyapatite Nanocomposite From Waste Bones, Umar Nishan, Nighat Jabeen, Amir Badshah, Nawshad Muhammad, Mohibullah Shah, Irfan Ullah, Saifullah Afridi, Jibran Iqbal, Muhammad Asad, Riaz Ullah, Essam A. Ali, Sarfraz Ahmed, Suvash Chandra Ojha

All Works

Dopamine is one of the most important neurotransmitters and plays a crucial role in various neurological, renal, and cardiovascular systems. However, the abnormal levels of dopamine mainly point to Parkinson’s, Alzheimer’s, cardiovascular diseases, etc. Hydroxyapatite (HAp), owing to its catalytic nature, nanoporous structure, easy synthesis, and biocompatibility, is a promising matrix material. These characteristics make HAp a material of choice for doping metals such as cobalt. The synthesized cobalt-doped hydroxyapatite (Co-HAp) was used as a colorimetric sensing platform for dopamine. The successful synthesis of the platform was confirmed by characterization with FTIR, SEM, EDX, XRD, TGA, etc. The platform demonstrated …

Dataset For Article - The Analysis Of Lava Flow Path Using Remote Sensing And Geo-Morphological Techniques: The Case Of Volcano Eruptions In Afar Region Of Ethiopia, Oluwatosin Ayo, Jae Sung Kim

Michigan Tech Research Data

The lava from volcanic eruptions rapidly moves on the Earth surface and affects both natural and man-made features. The objective of this study is to develop a workflow for determining the optimal ground sample distance of a digital elevation model to delineate the lava flow paths using object-based image analysis and geomorphologic analysis. For the experiment, the satellite images and digital elevation model of Afar region of Ethiopia was used. The satellite images of the affected areas were segmented using large-scale mean shift image segmentation to find the lava objects. The main centerline of the lava object from the 2008 …

Ferroresonance In Three-Phase Electrical Networks, Shavkat Ernstovich Begmatov

Technical science and innovation

Possible modes of ferroresonance in three-phase electric networks and analysis of substitution schemes where ferroresonance voltage increase is observed are considered. The most complete magnetization curve of the transformer core and the analysis of the generalized equivalent substitution scheme are presented, as a result of which more accurate formulas for determining the values of equivalent parameters of the electrical network and voltage transformer in ferroresonance mode are obtained. Factor of ferroresonance voltage increase is introduced, which determines ratio between amplitude values of transformer phase voltage and mains voltage. The method of determination of boundary conditions of steady ferroresonance voltage increase …

Main Prospects Of Natural Gas Purification Technologies From Acidic Compounds, Oybek Yusupdjanovich Aripdjanov, Diyora Zokhid Qizi Khayrullaeva, Jonibek Avazek Ogli Abdumuminov

Technical science and innovation

The article discusses the main prospects for the technology of purifying natural gas from acidic components and the problems of ensuring the purity of oil and gas products in accordance with state standards. An increase in the degree of purification from H₂S, CO₂, elemental sulfur, carbonyl sulfide, ethyl mercaptans (thiols), methyl mercaptan, carbon disulfide, sulfides, disulfides (dithioethers), thiophene, sulfoxides and sulfones is considered. Also, the physicochemical properties of the absorbent for the purification of sulfur compounds (generated during natural gas processing) are studied. Based on the study of various absorbents (ethanolamine (EA), methylethanolamine (MEA), diethanolamine (DEA), …

Induced Oxidation Effects On Physical And Mechanical Properties Of Lignite From Tempoku, Hokkaido, Japan For Sustainable Mining Via Subsurface Cultivation And Gasification Method, Akm Badrul Alam, Noritaka Aramaki, Shuji Tamamura, Akio Ueno, Takuma Murakami, Yoshiaki Fujii, Katsuhiko Kaneko

Journal of Sustainable Mining

The lignite resource has been under consideration for the subsurface cultivation and gasification (SCG) method to produce biomethane from lignite in Hokkaido, Japan. The primary phase of the method entails initiating the oxidative transformation of lignite using an H₂O₂ solution, resulting in the formation of dissolved organic carbon (DOC), a pivotal component. To examine the effects of induced oxidation on lignite's mechanical properties, artificial oxidation tests were conducted to form DOC. While there was a slight decrease in P-wave velocity and density, the uniaxial compression and indirect tensile strengths, as well as stiffness, did not decrease. These …

A Hybrid Communication System Using 5g Cellular And Ads-B For Uavs In High-Density Airspaces, Coulton Lee Karch

Theses and Dissertations

Robust communication is required to provide a safe airspace for the large numbers of unmanned aerial systems that are coming to the National Airspace System (NAS). This thesis explores methods for providing robust communication to large numbers of vehicles in the NAS. Automatic dependent surveillance-broadcast (ASD-B) is a transmission system that can transmit to and is currently required on all manned aircraft. Unfortunately, ADS-B suffers connectivity problems when supporting large numbers of unmanned aerial systems (UAS). The 5G Cellular protocol can support large numbers of UAS, but connectivity suffers with an increase in distance and interference. Using a 5G cellular …

Improving Wifi Sensor Network Security Through Unassociated Device Communication Using Wireless Latency Shift Keying, Jacob Edward Johnson

Theses and Dissertations

IEEE 802.11 (WiFi) only has two modes of trust--complete trust or complete untrust. The lack of nuance leaves no room for sensors that a user does not fully trust, but wants to connect to their network, such as a WiFi sensor. Solutions exist, but they require advanced knowledge of network administration. We solve this problem by introducing a new way of modulating data in the latency of the network, called Latency Shift Keying. We use specific characteristics of the WiFi protocol to carefully control the latency of just one device on the network. We build a transmitter, receiver, and modulation …

Gps-Denied Localization Of Landing Evtol Aircraft, Aaron C. Brown

Theses and Dissertations

This thesis presents a dedicated GPS-denied landing system designed for electric vertical takeoff and landing (eVTOL) aircraft. The system employs active fiducial light pattern localization (AFLPL), which provides highly accurate and reliable navigation during critical landing phases. AFLPL utilizes images of a constellation comprised of modulating infrared lights strategically positioned on the landing site, to determine the aircraft pose through the use of a perspective-n-point (PnP) solver. The AFLPL system underwent thorough development, enhancement, and implementation to address and demonstrate its potential in navigation and its inherent limitations. A proposed method addresses the limitations of AFLPL by using an extended …

Energy-Absorbing Helmet For Safer Football, Aidan Laudeman

Honors Theses

Football-related injuries are a common occurrence and are often detrimental to the player’s health. Force impacts frequently occur at the front, back, and sides of a player’s helmet, resulting in head injuries like concussions. The goal of this project is to reduce recurrent head injuries by designing a solution involving the use of energy-absorbing metallic materials that are inserted into a football helmet. These energy-absorbing materials are configured in target zones inside the helmet to reduce the acceleration of the head based on impact locations. The chosen materials are nitinol and spring steel, which display energy-absorbing properties. Various energy-absorbing material …

Electric Ducted Fan Lander, Maggie Waechter

Honors Theses

This report, and corresponding project, addresses the fact that there are not many student experiments with controlling real spacecrafts due to the scarceness of the craft, cost, risk, and finite fuel supply. This project demonstrates the possibility of a classroom substitute for students to understand how landers would operate on planetary bodies. In order to achieve flight from the drone, there were two separate designs produced, the electrical and structural system, that were integrated together to form a full prototype. The performance of the electric ducted fans (EDFs) as well as the batteries were tested to ensure that the components …

Hydrogen Fuel Cell Catalyst Test Stand For Single Cell Evaluation, Tyler Johnson

Honors Theses

The main objective of this project was to develop at test stand and relevant testing procedures to aid in ongoing research being conducted by Dr. Ghantasala’s team on platinum-alternative catalyst materials used in proton exchange membrane fuel cells (PEMFCs). To do this, various software (Microsoft Excel, Python, and Simscape) were used to create fuel cell simulations of increasing complexity. These simulations served as baselines for PEMFC evaluation in experimental testing, and they were used to create polarization curves, a standard method for evaluating steady state fuel cell performance. A test stand was also created in order to effectively and efficiently …

Development Of Deep Neural Architecture For Continuous Sign Language Video Generation, Natarajan B

Theses and Dissertations

This dissertation presents a deep neural network based sign language video generation framework for translating the multilingual sentences into sign videos. This thesis addresses the challenges persist with the sign language video generation such as (i) Handling longer sequences of input sentences and new words (ii) Pose estimation with higher accuracy (iii) High quality photo realistic sign gesture video generation (iv) Improving realism in sign video generation. Hence, the thesis focuses four contributions to address the above issues.

The first contribution of this thesis automates the translation of multilingual sentences into sign glosses without manual intervention by incorporating Hybrid Neural …

Techno-Economic Analysis Of Solar Pv Systems Under Various Environmental Conditions, Ramkiran B

Theses and Dissertations

World Energy Council has predicted that the global electricity demand will peak in 2030. The need for renewable energy has grown rapidly due to the rising energy demand in this ever-growing population. Green house gas emissions are predominantly due to the energy generation and consumption of fossil fuels. On the other hand, fossil fuels supply nearly 74% of India's energy demand, making India one of the world's largest coal consumers.

According to World Resource Institute, India ranks fourth in the world in terms of carbon emissions. Investments in renewable energy sources and energy-saving technologies should be part of a solution …

Ssnet: Exploiting Spatial Information For Tobacco Stem Impurity Detection With Hyperspectral Imaging, Chao Zhou, Zhenye Li, Dongyi Wang, Sheng Xue, Tingting Zhu, Chao Ni

Biological and Agricultural Engineering Faculty Publications and Presentations

Tobacco stems are a critical component in cigarette production in China. However, accurately and promptly identifying impurities in tobacco stems remains a challenge with current deep learning methods, often failing to meet industry standards. This study introduces the Spectral-Spatial Network (SSNet), which is specifically optimized for rapid and precise detection of impurities in tobacco stems, leveraging spatial information in hyperspectral imaging. Designed to align with the high-speed requirements of industrial processing, SSNet effectively overcomes the complexities associated with analyzing hyperspectral data. The integration of spatial information particularly enhances recognition accuracy, especially in areas affected by fringe patterns. Our experiments reveal …

Tunable Dual-Phase Dual-Drug Delivery System Using A Plga Microparticle/Pva Hydrogel Composite, Timothy John Eck

Theses and Dissertations

Current drug-eluting coatings have demonstrated controlled long-term, sustained release but have only tried to mitigate short-term burst release as a negative side effect. For applications like wound healing, there is a need for a drug-eluting coating which is adjustable in both short- and long-term release, independent of each other. We present a tunable dual-phase dual-drug delivery coating composed of drug-loaded polymer microparticles and drug-loaded hydrogel which can control short term and long term release individually in this study. This coating was created using lidocaine and dexamethasone encapsulated in poly(D,L-lactide-co-glycolide) particles combined with lidocaine- and dexamethasone-loaded poly(vinyl alcohol) hydrogel. Hydrogel drug …

Optimal Aoi For Systems With Queueing Delay In Both Forward And Backward Directions, Chih-Chun Wang

Department of Electrical and Computer Engineering Technical Reports

Age-Of-Information (AoI) is a metric that focuses directly on the application-layer objectives, and a canonical AoI minimization problem is the update-through-queues models. Existing results in this direction fall into two categories: The open-loop setting for which the sender is oblivious of the packet departure time, versus the closed-loop setting for which the decision is based on instantaneous Acknowledgment (ACK). Neither setting perfectly reflects modern networked systems, which almost always rely on feedback that experiences some delay. Motivated by this observation, this work subjects the ACK traffic to a second queue so that the closed-loop decision is made based on delayed …

1st Person Ev With Electronic Differential, Tessa Biondo

Honors Theses

The First Person EV with Electronic Differential for Vehicle Dynamics Analysis project makes a significant leap forward in the exploration of electric vehicle (EV) stability and performance enhancement. Lead by a team of skilled electrical engineering students under the guidance of WMU’s associate Professor Dr. Sandun Kuruppu, this project aims to improve EV stability by optimizing power and torque distribution between wheels using an electronic differential system. The project encompasses the design and assembly of a 1/7^th scale custom electric vehicle, capable of remote control via a first-person view (FPV) camera and modified USB wheel and pedal assembly. The …

Design Of Telemetry And Remote-Control System For Electric Propulsion Testing, Logan Alvesteffer

Honors Theses

Ground testing of electric propulsion (EP) devices occurs inside vacuum chambers and is monitored using high-frequency and low-frequency telemetry systems. These systems provide critical operational information about the device’s performance by monitoring values such as voltage, current, gas flow rates, and chamber pressures. Ground facility telemetry systems can operate as integrated control and safety architecture while testing EP devices. EP testing at Western Michigan University (WMU) is located within the Aerospace Laboratory for Plasma Experiments (ALPE). The Cold plasma Experimental Research Station (CEReS) is outfitted with CTI-250F and CTI-10 cryogenic pumps for a combined pumping capacity of 5,200L/s-air. CEReS facilitates …

Assessing Past Airworthiness Directives And How Safety Management Systems May Benefit Aviation Product Design And Manufacturing, Damon Lercel, Manoj Patankar, Richard Steckel

Journal of Aviation/Aerospace Education & Research

The European Union Aviation Safety Agency (EASA) continues to promulgate Safety Management Systems (SMS) across aviation organizations when it recently issued SMS requirements for EASA certificated Part 145 maintenance, repair and overhaul (MRO) organizations and Part 21 Design & Manufacturing (D&M) organizations. Currently, the Federal Aviation Administration (FAA) has no such rule in place for these U.S.-based organizations, which may challenge those doing business in countries where EASA policies apply. Given that a majority of the United States’ D&M and MRO population is made up of smaller organizations, it is likely a U.S. SMS regulation will require justification of the …

History’S Slowest Digital Transformation: The Long Road To Flight Data Monitoring, Michael Ott

Journal of Aviation/Aerospace Education & Research

Flight data monitoring (FDM) began in the flight test community in 1939 and entered the airline industry in 1974. In the 48 years since, however, very few operators have chosen to adopt this practice, which has shown clear safety benefits where it has found acceptance. While technical issues have created some obstacles, cultural issues have proven the greatest hindrance to wider FDM adoption. These cultural issues originated in the traits associated with pilots’ personalities, especially distrust of the regulators and operators who would administer flight data analysis programs (FDAP) that used FDM information. U.S. regulators have relied on voluntary adoption, …

Application Of Density Altitude Climatology To General Aviation Impacts, Thomas A. Guinn, Daniel J. Halperin, Sarah Strazzo

Journal of Aviation/Aerospace Education & Research

Density altitude (DA) plays a key role in flight safety because it helps pilots anticipate poor aircraft performance when temperatures are warmer than standard. In this study, a 30-year climatology of DA for the conterminous United States was created using the fifth-generation European Centre for Medium-Range Weather Forecasts atmospheric reanalysis of the global climate (ERA5) dataset was applied to four separate DA-based, aircraft-performance, rules-of-thumb for general aviation (GA) flight. The goal was to demonstrate a technique to create educational visualization tools showing the variation of operational flight impacts with both month and location. Four such parameters were chosen to show …

Integrated Organizational Machine Learning For Aviation Flight Data, Michael J. Pritchard, Austin T. Walden, Paul J. Thomas

Journal of Aviation/Aerospace Education & Research

Increased availability of data and computing power has allowed organizations to apply machine learning techniques to various fleet monitoring activities. Additionally, our ability to acquire aircraft data has increased due to the miniaturization of small form factor computing machines. Aircraft data collection processes contain many data features in the form of multivariate time series (continuous, discrete, categorical, etc.) which can be used to train machine learning models. Yet, three major challenges still face many flight organizations: 1) integration and automation of data collection frameworks, 2) data cleanup and preparation, and 3) developing an embedded machine learning framework. Data cleanup and …

Training Methods Research Opportunities For A Pilot Workforce In Transition: A Literature Review, James Birdsong, Kurt L. Reesman

Journal of Aviation/Aerospace Education & Research

Over the next 15 years, 50% of the U.S. commercial air carrier workforce will retire, making way for younger pilots from Generations Y and Z. This review identifies the emerging pilot workforce and training methods, including emerging technologies and learning methods, as well as research gaps.

Interpersonal Skills In A Sociotechnical System: A Training Gap In Flight Decks, Kimberly Perkins, Sourojit Ghosh, Crystal Hall

Journal of Aviation/Aerospace Education & Research

This research analyzed the perceptions of interpersonal skills on established aviation safety models, Crew Resource Management (CRM), and Threat and Error Management (TEM) using feedback from industry pilots. The flight deck is a sociotechnical system where much research has focused on the technical aspect, whereas we spotlight its socio aspect. The aviation industry must invest in training pilots on interpersonal skills to enhance safety through increased efficacy of safety models integrated throughout existing training programs. A 34-question survey was disseminated across both commercial and business aviation pilots (N=822). We explored three research questions regarding pilots’ perceived training on interpersonal skills …

Production Of Mrna Vaccine For Influenza, Christina Miller

Honors Theses

The objective of this project is to design a process to produce an mRNA influenza vaccine that serves as an alternative to conventional influenza vaccines, replacing current options with innovative mRNA technologies. Given that older populations are most likely to follow up on immunizations consistently, and the increasing average age worldwide, the market for this project appears to be expanding in the next 80 years. Additionally, experts predict more frequent mutations and outbreaks of viral disease from a variety of factors including globalization and global temperature trends. Rapid response to these viral outbreaks will continue to be as, or even …

Systems, Models, And Simulation For Novel Microfabrication Of Silicon Carbide And Metal Mesh Filters, Hunter R. J. Stevenson

Theses and Dissertations

As the boundaries of Moore's Law rapidly approach, research is increasingly turning to exotic materials and metamaterials to advance the capabilities of electronic and micromechanical systems. This thesis presents systems, models, and simulation techniques for novel microfabrication in the realms of silicon carbide (SiC) and metal mesh filters. Through the unification of femtosecond laser pulses, high numerical aperture (NA) objective lenses, and system power and motion control, a system capable of achieving arbitrary 3D features without line-of-sight with aspect ratios up to 109:1 in SiC is developed. Additionally, a model of a direct-write femtosecond-laser-ablation fabricated metal mesh filter (MMF) is …

Modified Coulomb Approach For Squat Silos, Mitchell Cade South

Theses and Dissertations

Traditional methods for calculating lateral pressures in silos, such as Janssen's Method and Coulomb's Method, have limitations due to the underlying assumptions of each methodology. This research investigates an approach which adapts Coulomb's Method to account for the cylindrical geometry of silos. The Silo Wedge Method (SWM) distinguishes between two cases based on the aspect ratio (height/diameter) of the silo. Comparative analysis reveals that the SWM accurately matches Coulomb's Method for linear retaining walls when the silo aspect ratio approaches zero. As the aspect ratio increases above 0.25, the SWM exhibits behavior similar to Janssen's Method. This suggests a potential …