Engineering Commons^™

The Effect Of Reheating Certain Fire Brick On Pyrometric Cone Equivalents, Francis J. Louney

Bachelors Theses

"In a recent survey of the refractories field, especially with respect to the softening point of fire brick, it was suggested to the author that the possibility of reheating certain fire brick, according to the specifications given by the American Society for Testing Materials, might produce a difference in pyrometric cone equivalent from that of the original or unreheated sample. At present, there is considerable lack of knowledge regarding the problem, as evidenced by the utter lack of literature on the softening point resulting from the reheating of fire brick"--Introduction, leaf 1.

Quantitative Microscope Study Of The Flotation Products Of The Anaconda Copper Concentrator, A. M. Gaudin, H. B. Henderson

Bachelors Theses and Reports, 1928 - 1970

This paper presents the results of a quantitative microscope investigation of the flotation products of the Anaconda Copper Concentrator at Anaconda, Montana, undertaken in September 1930 under the terms of the Cornelius F. Kelley Fellowship. This fellowship was established at the Montana School of Mines by the Anaconda Copper Company.

The Effects Of Temperature And Pressure Variation On The Process Of Cooking Foods, Benjamin M. Aldrich

Electronic Theses and Dissertations

It is generally known that water has a definite boiling temperature for each pressure to which its surface is subjected and that wet steam generated in a closed vessel maintains a definite temperature-pressure relation. Under each condition of temperature and pressure the steam contains a fixed amount of available energy stored as heat and called, "Heat Content" the value of which is usually based upon an arbitrary zero fixed a 32 degrees F., the freezing temperature of water under one atmosphere of pressure.

Test 212: Mccormick-Deering Farmall "F-12", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 213: Caterpiller Model 70, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 215: Allis-Chalmers Special K, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 214: Caterpiller "Diesel 50", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 217: Caterpiller "Diesel 35", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 220: Mccormick-Deering Farmall "F-12" (Kerosene), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 219: Massey-Harris "3-4 Plow", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 216: Allis-Chalmers Model M, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

A Plant Efficiency Survey And Experimental Plant Results Obtained At The Sioux Falls Sewage Treatment Plant, Sioux Falls, S.D., Lowell A. Yost, Hans Jepson

Electronic Theses and Dissertations

"Sioux Falls, the largest city in South Dakota is situated on a bend in the Sioux River. The flow of this river ranges from a recorded minimum flow or 9 to a maximum flood flow of 500 cu. ft. per second. As originally designed and built the sewage system emptied into the river at three main outlets. In 1910 the City had a population of approximately 14000 people, and during the next decade its population practically doubled. During this period of growth there was added to the industries of the City a large meat packing plant which has been steadily …

Test 218: Caterpiller "Diesel 75", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

A Study Of The Evaporation Of Organic Liquids And Mixtures Of Organic Liquids, George Walter Eckert

Masters Theses

"The purpose of this thesis is to make a study of the evaporation of organic solvents. The relative rates of evaporation of the single substances and binary and ternary mixtures are to be considered. A study of the changes in composition of binary and ternary mixtures that occur on evaporation are to be made. Information on the evaporation of organic liquids is important in relation to lacquers, and for that reason the solvents used in this work are liquids commonly used in making lacquers"--Introduction, page 2.

A Method For Increasing The Iodine Value Of The Saturated Fatty Acids, Richard Groves Holmes

Masters Theses

"The work covered by this thesis was undertaken with the idea of finding a method whereby unsaturated oils, of the drying type (those having iodine values of one hundred fifty or above), could be made from the saturated fatty acids. After an exhaustive search of the literature no evidence was found that this means of producing the unsaturated acids had ever been developed. Work has been done on the chlorination products of the fatty acids, the processes being covered by patents. No evidence however was given as to the possible structure of these compounds"--Introduction, page 1.

The Relation Between The Mean Molecular Weight And The Absolute Viscosity Of Lubricating Oils, John Isler Moore

Masters Theses

"Of all the properties required of a good lubricant the most important is that of the viscosity at the temperature of its use. Most lubricants consist of oils blended or compounded together in such a way as to produce an oil of a desired viscosity, falling in the special group of viscosities expressed by the Society of Automotive Engineers in their tabulations.

There have been several methods developed to enable the refiner to blend quickly and efficiently although Bell stated that the methods were largely that of trial and error. Herschel formed a chart for blending by the logarithmic rule …

Factors Affecting The Performance Of Kerosene Cook Stoves, Edna B. Snyder

Nebraska Agricultural Experiment Station: Historical Research Bulletins

The purpose of this investigation was to learn the effect of constructional details of the burner and the framework on the performance of kerosene stoves. Six stoves were used, four of the long-chimney type and two of the short-chimney type. Of the long-chimney burners, three were from the same manufacturer; the fourth was similar in appearance, but differed in performance. Of the short chimneys one burner used a wick, the other a lighting ring. The effect of: (1) draft variations and constructional details and (2) the framework on the heating time and thermal efficiency of stoves was studied.

Problems Encountered In The Development Of An Airport, A. H. Armstrong

Theses

The progress of a nation and. its transportation facilities have always advanced hand in hand.

Just as it has always beerthe Civil Engineer's problem to develop facilities for other means of transportation, such as roads, harbors, and. railroad terminals, so is it his problem today to build airports.

In presenting the problems encountered in the development of an airport, the writer has considered the airport's place in city and regional planning, as well as the part it plays in air transportation.

An expression of thanks is given to Mr. Wm. S. La Londe, Jr., professor in Civil Engineering at the …

Piles And Pile Driving, Robert W. Van Houten

Theses

This thesis on the subject of "Piles and Pile Driving" has been written to fulfill one of the requirements for the granting of the degree of Civil Engineer by the Newark College of Engineering. The material contained in this thesis has been gleaned from many books, catalogs, magazines and from the author's own experience. Much still needs to be accomplished in the field of research but this can be done only through the cooperation of the companies who are engaged in this work and have the equipment necessary for making many tests under actual field conditions.

The author wishes to …

The Recovery Of Copper In Sulphide Ores By Roasting, Leaching, And Electrolysis, Jack S. Greenough

Bachelors Theses and Reports, 1928 - 1970

Sulphide ores of copper are insoluble in dilute sulphuric acid leaching solutions, but a very high extraction can be obtained if the copper ore is in the oxidized condition. The problem is to convert the sulphide into the oxide form. This can be done by giving the sulphide ore an oxidizing-sulphatizing roast. Copper sulphate is soluble in water, so acid will be saved in the leaching process if copper sulphate is present. The iron in the copper sulphide ores is present as pyrite, or in combinations as bornite, or chalcopyrite.

The Effect Of The Fe2: Fe3 Ratio Upon The Current Efficiency In The Electrolysis Of A Copper Sulfate Solution Containing Iron Sulfate, Roy Macfarland

Bachelors Theses and Reports, 1928 - 1970

In the treatment of copper ores by hydro-electro-metallurgical methods, not only is copper deposited, but other metals are also dissolved. In practice it has been found* that iron, under certain conditions, causes the copper to deposit on the cathode as a nonadherent precipitate and also that the iron in solution causes a great decrease in current efficiency, es­pecially when the electrolysis is conducted by operating with a higher current density at the cathode than at the anode.

The present investigation deals with the effects of the two valences of iron on the current efficiency and endeavors to determine whether or …

Some Notes On The Composition Of "Copper Pitch", Richard R. Matthew

Bachelors Theses and Reports, 1928 - 1970

A supply of so-called "copper pitch" ore was received by the Montana Bureau of Mines and Geology in response to a request by them from a resident of Kalispell, who had previously sent a specimen to the Bureau for a mineralogical analysis.

Since this material was little known and had apparently received but little study under a reflec­ting microscope, it was thought that such a study might throw some light on the mineralogical and chemical composition of the material.

The Aplitic Body Bordering Roosevelt Drive South Of Butte, Montana, Edward B. Trueworthy Jr.

Bachelors Theses and Reports, 1928 - 1970

The area studied consists of a large body of aplite situated 12 miles south of Butte. It extends eastward almost to the Butte-Pipestone road, southward to Lime Kiln Hill and westward a distance of 3000 feet.

The petrographic work was supplemented by a map of the area. Special attention was given to those frequent "Limonite Specks" found in the aplite.

Joint Planes In The Rhyolites Of The Butte District, Montana, John B. Hopkins

Bachelors Theses and Reports, 1928 - 1970

The problem herein discussed deals with the pointing planes found in the area of rhyolite located in the northwestern portion of the Butte District. The question to be determined was whether or not the pointing planes in the rhyolites could be class­ified with the Butte Ore fissure systems.

A Bentonite Deposit Near Warm Springs, Montana, R. H. Larson

Bachelors Theses and Reports, 1928 - 1970

This report deals with a bentonite deposit recently developed, approximately seven miles northeast of Warm Springs, Montana. A group of claims have been staked on the deposit and are owned by the Lincoln Mining Company of Anaconda, Montana. The company also has several claims prospected for silver one mile from its present site of operations, but the silver prospects have failed to produce. The bentonite deposit was discovered incidentally during the course of other development work, and at present two adits have been driven into the side of a mountain, each crosscutting a vein-like mass of bentonite varying from two …

Asphalt Emulsions, Albert Joseph Krause

Bachelors’ Theses

During the past decade the improvement of our primary or trunk line highways and the streets of our business as well as the principal residence streets of our towns and cities has gone forward at a rapid pace. For the most part these improvements have consisted of high-type, costly pavements which have in some cases placed excessive burdens on our public treasuries and the tax-payers who are assessed for them.

The Rate Of Precipitation Of Copper Aluminide In The Silver Rich Silver-Copper-Aluminum Alloys, Thomas Finley Mcbride

Bachelors Theses and Reports, 1928 - 1970

In order to determine the best annealing temperature at which to age-harden the alloys, hardness tests on speci­men annealed for different lengths of time at different temperatures were made.

The Effect Of Hydrogen Overvoltage On The Electrolytic Deposition Of Zinc, John M. Munzenrider, Kenneth O. Sweeney

Bachelors Theses and Reports, 1928 - 1970

In the deposition of metallic zinc by electro­lysis from neutral or acid solution, little difficulty is experienced provided certain impurities are absent from the electrolyte. The use of the process has long been considered as a potential source, patents on the process having been issued as early as 1880. However, the early experimenters failed to realize the importance of impurities in the electrolyte, and for this reason, the process suffered several severe setbacks when commercial plants were built.

The Electrolytic Deposition Of Chromium Upon Aluminum, E. Fults, L. D. Voerge

Bachelors Theses and Reports, 1928 - 1970

The purpose or this investigation is primarily to determine the best conditions for plating chromium on aluminum. The work was carried out with the hope of obtaining coherent deposits, and of determin­ing the conditions under which such deposits may be duplicated.

Fundamentals Of Bridge Design, Albert C. Kalmbach

Bachelors’ Theses

Man's earliest communication followed: water routes. Our prehistoric ancestors, evidence shows, fashioned boats and rafts which enabled them to travel along the rivers, and later to sail the seas. Following history through the years we will find man always developing theater routes for transportation before other methods. The early colonies in our America were along the coastal rivers; the Ohio and Mississippi river valleys were first settled in the interior.