Engineering Commons^™

Test 224: Caterpiller Model R-5, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 230: Mccormick-Deering Tractractor "T-40" Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 231: Mccormick-Deering "W-12" (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 228: Caterpiller Model 22, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 229: Mccormick-Deering "W-12" (Kerosene), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 223: Allis-Chalmers Model Wc, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 221: Mccormick Deering Farmall F-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

The Photobromination Of Azobenzene, Oden Cass Garst

Masters Theses

"The purpose of this thesis is to make a study of the photobromination of azobenzene. The effect of various variables has been studied. The factors considered were, temperature, frequency of light, and concentration. Information on photobrominations is of great scientific importance, as it opens up a comparatively new field of research, and also contributes further data which helps to establish the quantum theory, if indeed this theory is still in controversy"--Introduction, page 3.

A Study Of The Effects Of Paraffin Wax Upon The Viscosities Of Lubricating Oils, Charles Leo William Hunze

Masters Theses

"The determination of the mean molecular weight of oils and paraffin waxes may have significance as: (1) an important property from a purely research point of view; (2) a step towards structure determination; (3) a study of molecular association with viscosity, making possible the application of well established viscosity binary mixture formulas to oil blends and oil and paraffin wax blends; (4) an aid in the calculations of latent heats for refinery engineering purposes (see A.A. Ashworth's applications of this property); (5) a possible means for identifying bitumens of unknown origin, and determining the approximate proportion of each type in …

Test 227: Caterpiller Model R3, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

A Study Of Five Commercial Electric Stoves, A. E. Baragar, Edna B. Snyder

Nebraska Agricultural Experiment Station: Historical Research Bulletins

Five commercial electric stoves having major variations in types of surface units, in the construction, lining, and insulation of the oven, and in the retail price were studied to determine (1) the efficiency and time of heating of the various surface units, and (2) the merits of differently constructed ovens.

Leaching Copper Minerals In The Butte District, Kenneth C. Bellows

Bachelors Theses and Reports, 1928 - 1970

The history of mining in Butte is woven about three of our principal metals. The gold placers first attracted the attention of miners in 1863, and reached their peak production in 1867. Silver was the second metal mined, and this operation required the erection of large mills with a consequent increase in mining activity that made the district a prominent producer. Although the presence of copper in the silver ore had been known, the credit for the first development of the copper veins is due Senator W. A. Clark. The original Colusa, Mining Chief, and Gambetta claims were developed to …

The Calcite Veins Of The Livingston Formation, John Moore Conrow

Bachelors Theses and Reports, 1928 - 1970

An interesting group of calcite veins occur near Livingston Montana in a zone about eight miles wide and forty miles long in the edge of the Plains region of Montana in front of the Main ranges. The zone extends from the Boulder River south of Big Timber, through Springdale and Hunters Hot Springs, to Potter's Basin just north of Wilsall in Park County. The group of veins is particularly interesting because they cut relatively flat lying strata, suggest a structural relation­ship to one another, and they are nearly pure calcite.

The present investigation was to determine the position of the …

A Microscopic Study Of Some Volcanic Rocks In The Vicinity Of Butte, Evan Gustafson

Bachelors Theses and Reports, 1928 - 1970

The rhyolite rocks in the vicinity of Big Butte present a very interesting, though complicated study. It seems that no extensive or conclusive work has ever been done upon these extrusives.

I have found that the rhyolites present a very interesting problem, especially microscopically, and that no doubt an intensive study along these lines will solve the problems concerning age relations of different flows and origin of the magma that produced the material for emanations.

A Study Of Montana Bentonite, William P. Ryan

Bachelors Theses and Reports, 1928 - 1970

Research has been undertaken both under Government and private auspices in an endeavor to develop uses for bentonite. Perhaps, the work done to date has had only in consideration the possible industrial importance of bentonite. No simple, quick methods for the determination of the properties or qualities of any particular bentonite have been developed.

In an attempt to establish whether or not there is a means of making rapid simple determinations of the quality of Montana bentonitic clays, and in particular, with regard to the uses to which the clays may be suited. The problem also involves a study of …

The Electrical Resistance Of Metals In Their Hard And Soft States, Eugene A. Avery

Bachelors Theses and Reports, 1928 - 1970

Many investigations have shown that the electrical resistance of soft annealed metals is usually smaller than that of metals in their hard, cold worked state. By annealing cold-worked metals, the electrical resistance decreases to a minimum and then increases upon continued annealing at higher temperatures. The work performed in this investigation upon silver, aluminum, copper, nickel, and soft steel corroborates this idea.

Effect Of Impurities Upon Current Efficiency In The Electrolysis Of Zinc Sulphate Solution, Robert Jess Smith

Bachelors Theses and Reports, 1928 - 1970

There are many elements which are detrimental to the current efficiency in the electrolysis of zinc sulphate solution. Fortunately the majority of these elements are easily removed in the purification process and cause no further trouble. The elements that are likely to cause trouble in ordinary plant operations are antimony, arsenic, cobalt, nickel, manganese and germanium. The following tests were made to determine the mutual effect on the current efficiency when several of the impurities were present in the electrolyte.

A Study Of The Composition Of Zinc Complex Cyanide Solutions By The Conductometric Method, Robert James Woody

Bachelors Theses and Reports, 1928 - 1970

As the method or analysis used up to the present time has failed to give quantitative results in determining the composition of zinc cyanide baths, conductometric methods were adopted in this study. Supplementary tests were also carried out in this investigation.

The Leaching Of Electrodeposition Of Iron, Emmett G. Simmons

Bachelors Theses and Reports, 1928 - 1970

Electrolytic iron as deposited is brittle and therefore must be annealed. After annealing, the material is ductile and closely resembles copper in its behavior under work. It is claimed to be more resistant to corrosion than dead soft iron. It also has the advantage of corroding uniformly ( or­dinary soft iron develops pin holes which shorten its life considerably).

The extreme purity of electrolytic iron namely makes it very suitable as a base metal for alloys. Its ductility opens up a field for use in the manufacture of cold rolled strip, seamless tubes, and wire.

Fitting The Mechanical Refrigerator Into The Home, E. B. Lewis, M. P. Brunig

Nebraska Agricultural Experiment Station: Historical Circulars

Within the last five years the mechanical refrigerator has become a popular piece of household equipment. Its year-round use has caused architects and others interested in planning for the convenience of the housewife to recommend placing the new cabinet in kitchens and other convenient places, with little thought about the effect on the operation of the refrigerator. The purpose of this publication is to point out some of the conditions under which the refrigerator has been expected to operate successfully, and some of the effects of these conditions upon the operation of the machine.

Facing The Problem Of Traffic Congestion, William Forrestal

Bachelors’ Theses

Modes of transportation are constantly changing, and traffic, as well as its control, must be adapted to each new development.

Playgrounds And Recreation Areas In Real Estate Subdivisions, Joseph L. Doyle

Bachelors’ Theses

With the coming of the machine age, the need of adequate playground and recreation areas in large cities is steadily increasing. During the past ten years, or more, congested cities have found it necessary to supply at any cost, playground and. recreation areas, for their people, who from year to year find that they have more and more leisure time at their disposal. In an unlimited number of instances the only way this could be secured was by buying valuable land, wrecking the buildings thereon, and thus provide open spaces for recreation at an enormous cost to the city. Had …

History Of The Thermionic Tube, Mary Liguoria Urbin

Bachelors’ Theses

My interest in the field of physics being that of electricity, I have been permitted to pursue this thesis in the field of thermionics.

The thermionic tube is one of vital importance not only in the field of radiotelegraphy and radiotelephony, but is of great value in the field of engineering and a vast asset in university and college laboratories. In fact, its advent has opened up a new era in many fields. H. J. Van Bijl terms is a "versatile talking bottle." In a paper of this nature only the important features can be stressed, and even here much …

Some Problems In The Construction Of Artificial And Natural Gas Pipe Lines, Waring Mikell

Professional Degree Theses

"In 900 A.D. the Chinese piped natural gas through bamboo tubes and used it for lighting, and about 1830 artificial gas was carried by three inch wooden pipes in a town in New England. Today there are many thousands of miles of steel pipe bringing gas from Western fields to eastern cities, and many more miles of steel and cast iron pipe for the distribution of artificial and natural gas in the majority of the towns and cities in the United States. This paper will deal with the construction of acetylene welded steel pipe lines, and some of the problems …

The Location, Construction, And Maintenance Of The Rabbit Ears Pass Forest Highway, Julian Greenway Huckins

Professional Degree Theses

"The Bureau Public Roads, Department of Agriculture, has jurisdiction over the construction of, and Federal Aid Funds expended on, the Federal Aid Highways thruout the United States, Alaska, and Hawaii. It may not be generally known that the Bureau is also in direct charge of the location, construction, and maintenance of all National Forest Highways under the Department of Agriculture and all National Park Highways under the Department of the Interior. District No. 3 of the Bureau Public Roads, with headquarters in Denver, is composed of the States of Wyoming, Colorado, New Mexico, and the Black Hills Region of South …

Sewage Disposal Improvements At Pontiac, Michigan, Robert William Abbett

Professional Degree Theses

"The existing East Boulevard Sewage Disposal Plant consists of a set of bar screens, a grit chamber, a battery of three Imhoff tanks, eight trickling filter units, of the rotary-distributor type, and three secondary settling tanks. The plant was designed for a population of 52,500 in 1919 by Clarence W. Hubbell, Consulting Engineer. At the present time the plant shows evidence of loading beyond its capacity, the distress of the Imhoff tanks being particularly acute"--Present Sewage Disposal Facilities, page 5.

Aventurine Glazes, Felix Fraulini

Bachelors Theses

"The object of this study was to notice the effect produced upon the crystalline growth in the glaze by the variation of B₂O₃, Fe₂O₃, and SiO₂, and to notice the effect of cooling upon the crystalline growth in the glaze"--Scope of Investigation, leaf 3.

The Effect Of Variations In The Rate Of Heating On The P.C.E. Value Of Clays, Kenneth Emerson Evans

Bachelors Theses

"Softening temperature of ceramic materials vary with the rate of heating. Recently much discussion has centered about the proper rate of heating of cones in the P.C.E. test. The most obvious reason for the discussion is that the cones are affected by the rate of heating when tested alone for softening temperature"--Introduction, page 1.

A Comparative Study Of The American Society For Testing Materials Spall Test And The Federal Specifications Spall Test, Justus Jordan Beinlich

Bachelors Theses

"Commercial brands of fireclay brick will be tested with both the American Society for Testing Materials and the Federal Specifications Spall Tests in order to determine whether the two tests are consistent in the indication of resistance to spalling. It is suggested that the properties of a refractory affecting thermal spalling are reversible thermal expansion, elasticity, heat transfer, plastic flow, and strength. It is hoped that it will be possible to explain the discrepancies that may arise in the results of this work in terms of the above physical properties or else find a reasonable agreement between the two tests"--Introduction, …

Study Of The Substitution Of Barite For Barium Carbonate In A Whiteware Body Suitable For Brick Manufacture, Charles Edward Achuff

Bachelors Theses

"Some years ago a method of manufacturing white brick from Georgia Kaolin and apatite rock was developed. This was successful for supplying an attractive white brick to the southern trade, until difficulties were encountered in securing apatite rock of sufficiently high grade to insure the continuance of manufacture of the brick...With the foregoing facts at hand, a study was made of the utilization of an auxiliary flux to replace the apatite rock. A commercial brick was developed, wherein eight (8) per cent of this flux, with forty-two (42) per cent potters flint and fifty (50) per cent Georgia Kaolin was …