Engineering Commons^™

Adherent Electroplating On Molybdenum, Robert Marius Hansen

Theses

Molydbenum, due to its high temperature properties, and potential supply, is becoming a very important structural material, particularly in the field of electronics, however, it is not new in this part of industry. As temperatures go higher in various fields, the need for satisfactory materials becomes of paramount importance.

One of the ways in which to overcome the disadvantages of poor stability, brazing difficulties, and surface resistance to high frequency conduction, is by electroplating. Until recently there has been no satisfactory method for obtaining adherent deposits. The purpose of this report has been to investigate these recent processes and devise …

Preparation And Reduction Of Azo Dyes From 2-Amino Phenol-4-Sulfonic Acid, Guy J. Walker

Theses

Reduction of azo dyes is presented as a method for the synthesis of 2-amino phenol-4-oulfenic acid.

The synthesis and reduction of some azo derivatives of 2-amino phenol-4-sulfonic acid are described.

Preparation of the diazonium compounds of aniline, vitro aniline, 1-amino-2-nanhthol, 1-amino-2-naphthol-1-sulfonic acid, 2-amino phenol-4-sulfonic acid, 1-naphthol 1-amino, and 2-naphthylamine is discussed and their ability to couple with phenol-4-sulfonic acid evaluated.

Reduction of the resultant azo dyes is discussed with reference to fission and the benzidine rearrangement.

An overall presentation of results is Given in Tables I, II, and III on pages 27 - 29.

Cost Reduction Through Closer Control Of Quality, Walter Robert Kuzmin

Theses

The economy of our nation differs today from that of World War II or pre-World War II days by the fact that a war-production program is being carried on without adversely affecting the production or civilian goods, At the same time management is confronted with rising costs due to the inflationary spiral of wanes and materials. To mire a profit on Products and remain in competition, management is forced to apply the latest cost reduction methods. Because of the dual economy, companies are quoting on civilian goods and war Products. Contracts released by the government specify that; adequate inspection and …

Manual For Quality Control, Frank Andrew Antalec

Theses

Modern trends of industrial development have been directed toward increased output of products with greater precision and uniformity. This necessitates an inspection function that reflects more effective results than ever before. In order to rise to this occasion full use must be made of today's principles and techniques of inspection and quality control.

Industry demand the use of high precision measuring instruments to aid the inspection function in obtaining effective results. Recently, however, the techniques of Quality Control have become a well-known, useful, tool for the solution of many manufacturing problems. Effective use of these techniques depends on their complete …

Test 471 ; Terratrac Gt-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

The Design, Construction, And Calibration Of A Stationary Wave Device For Determining Sound Absorption Coefficients Of Acoustic Materials, Douglas W. Ballard

Mechanical Engineering ETDs

The general scope of the thesis investigation is limited to the engineering design and construction of a stationary-wave device for the experimental determination of the sound absorption coefficients of various building materials, the calibration of the apparatus to give comparisons with results obtained in the more expensive reverberation method, and to attempt to correlate observed results with generally accepted acoustical standards.

The Sedimentary Petrography Of The Oil And Gas Producing Horizons In Montana, Patrick J. Donahue

Bachelors Theses and Reports, 1928 - 1970

Montana is an excellent oil province, as oil and gas are pro­duced from a wider range of beds in the geologic section than in any other district in the United States. (1,864) Commercial fields have been developed in Ordovician, Devonian, Mississippian, Pennsylvanian, Jurassic, Lower Cretaceous, and Upper Cretaceous. It is believed that by describing the physical characteristics of the producing horizons, and by placing this information in one compact volume, a better under­standing of oil and gas occurrence in Montana may be gained.

The Accessory Minerals Of Some Granitic Rocks Of The Boulder Batholith, Robert T. Donahue

Bachelors Theses and Reports, 1928 - 1970

Although the position of the Boulder batholith in space and time is well known, the modes of occurrence of various rock types and the inter-relationships between the petrographic types are not known in detail.

The Mechanical Production Of Zinc Dust, Charles A. Schroer

Bachelors Theses and Reports, 1928 - 1970

The object of this thesis is to produce zinc dust suitable for zinc leach purification, by direct application of a mechanical force on a stream of molten zinc.The project is a continuation of work done by Mr. D. S. Gleason, while working for his Master of Science degree in the spring of 1952.

Flotation Of Huebnerite, Henry Albright

Bachelors Theses and Reports, 1928 - 1970

The development of suitable beneficiation processes for treating domestic low-grade tungsten ores is a problem now facing the mineral industry. While we are now consuming more tungsten than normally because of the defense program, we are no longer able to import ores from the world's principal source, China. The problem then, is to increase our domestic production so as to ac­quire a greater degree of self-sufficiency.

The Construction Of An X-Ray Camera, Emil Bazarnicki

Bachelors Theses and Reports, 1928 - 1970

The major portion of the construction of the X-ray camera was performed in the machine shop of Montana School of Mines. However, some machine work had to be accomplished in the Butte High Machine Shop, as well as in the machine shop of the Anaconda Copper Mining Company.

Protective Refractory Coatings On Titanium Metal, Eugene F. Gibbs

Bachelors Theses and Reports, 1928 - 1970

The problem undertaken in this thesis concerns the development of a newer phase of metallurgy, namely the adaption of the strong, lightweight metal titanium to high-temperature uses. The primary objective of the investigation is to determine wheth­er the application of refractory coatings to titanium will pro­tect the metal from chemical reactions and corrosion at high temperatures.

The Birdie Mine Tungsten Deposit Butte Mining District, Silverbow County, Montana, Bernard A. Fahm

Bachelors Theses and Reports, 1928 - 1970

The importance of tungsten has encouraged the search for minerals of this metal, and consequently new deposits have been discovered, and known deposits have been re-examined. Western Montana has rather widespread deposits if low-grade types are also considered. Many deposits were known long ago, but abandoned because the use of tungsten was still in its beginning stage and therefore little attention was given to this type of mineral.

Geological Problems At Kerr Dam Lake County, Montana, Roger C. Rice

Bachelors Theses and Reports, 1928 - 1970

With an increased demand for power in Montana and sur­rounding territory, there is a need for existing power installations to produce more hydro-electric power. Kerr Dam, Lake County, Montana has been one of the dams selected for added output.The existing dam and power house installation with its two hydro-electric was finished in 1938, and has been producing power ever since.

The Occurrence Of Molybdenite In The United States, Alaska, Canada, And Newfoundland, Richard W. Brummett

Bachelors Theses and Reports, 1928 - 1970

In this study of molybdenite and its occurrence, the pub­lished literature on 66 separate deposits was reviewed, sum­marized, and coordinated. The following descriptions are in­tended to point out the important features of molybdenite oc­currences as described in the literature.

The Immersion Coating Of Indium Upon Magnesium From Sulphate Solutions Containing Flourides, John J. Harrington

Bachelors Theses and Reports, 1928 - 1970

The thesis problem that will be discussed in this report is an investiga­tion of a method of plating a coating of indium upon magnesium and magnesium alloys. The method used to accomplish the final results is the immersion pro­cess. It can be defined as the process of coating a metal with a second metal by immersing the first in a solution containing ions of the second.

Variation Of Induction And Hysteresis Curves For The Heusler Alloy, Cu2mna1, Ford W. Knight

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation is to determine the fundamental magnetic characteristics of induction and hysteresis, for the alloy Cu₂MnAl. This is a ternary, ferromagnetic Heusler alloy. The problem is not only to determine these characteristics for the alloy as-cast but to heat treat it and observe the manner in which different heat treat­ments affect these two fundamental magnetic characteristics.

The Effect Of Ferric Iron Upon The Current Efficiency And The Deposition Of Copper In The Electrowinning Of Copper From Copper Sulphate Solutions, James L. Owings

Bachelors Theses and Reports, 1928 - 1970

In the hydrometallurgy of copper, probably the most widely used method for the precipitation of copper is by electrolysis using insoluble anodes. The process is similar in many respects to the electrolytic refining of copper; one of the main differences is the use of insoluble anodes in electrowinning as compared to the use of impure copper anodes in electrorefining. Impurities, however, are common to both processes. The nature of these impurities differ and the problem of purifying the electrolyte is also different.

Electrowinning Of Zinc By Mercury Cathode, Tor O. Notevarp

Bachelors Theses and Reports, 1928 - 1970

The problem was the investigation of electrowinning of zinc by using a mercury cathode, employing a neutral solution of zinc sulphate and containing small amounts of zinc, in the order of ten grams zinc per liter and less. The purpose of this study was on the base of the laboratory experiments to investigate the operational data that might possibly be applied in practice or industry.

The Mechanical Production Of Zinc Dust, Robert F. Payne

Bachelors Theses and Reports, 1928 - 1970

It was the purpose of this investigation to delve further into the possibility of producing, by mechanical means, a zinc dust which might be suitable for the puri­fication of zinc leach solution.

The Metallography Of Aluminum Casting Alloys, Donald D. Goehler

Bachelors Theses and Reports, 1928 - 1970

The purpose of this thesis is to supply the Montana School of Mines with an up to date source of information concerning the metallography of aluminum casting alloys. This thesis is designed as a continuing project. Ultimately, it is hoped that a catalog containing all the typical structures of aluminum casting alloys will develop.

The Effect Of Iron Upon The Electrowinning Of Copper With An Amalgam Electrode, John A. Alexander

Bachelors Theses and Reports, 1928 - 1970

Current commercial use of the mercury cathode cell is limited to two types of electrolytic sodium cells-­the Castner cell and the Sorenson cell. Mercury as a cathode medium has also found application in polarographic analysis, a method of a simultaneous quantitative and qualitative analysis of several metal components of solution.

An Investigation Of The Hardening Properties Of Some Alpha Copper Indium Alloys, Charles W. Mcpherson

Bachelors Theses and Reports, 1928 - 1970

Precipitation hardening alloys has assumed a major role in modern da^y development of alloys. In his search for stronger, harder materials, the metallurgist has often been limited by the cost of metals which posses the needed properties.

Electroplating Of Chromium, Nickel And Copper Upon Titanium, Stanley O. Fong

Bachelors Theses and Reports, 1928 - 1970

Recently, there has been a great amount of research work done on the metal titanium. Since it is a light weight metal, with unusual strength and good resistance to corrosion, it may be a possible substitute for aluminum and magnesium alloys, or steel.

Some Applications Of Geology To Civil Engineering With Special References To New Mexico And The Southwest, Eldred Ray Harrington

Civil Engineering ETDs

Civil Engineers are usually specialists in some branch of the great field. They often get so deep into the forest that nearby trees effectively obscure the forest as a whole. The same is true of the specialists in the numerous branches of the field of geology. The writer has a certain advantage in this study. Not only has he had approximately equal training in both fields but he has lived almost thirty years as an observer outside the "forest", taking occasional excursions into the thickets of the fields but never staying so long in any one of them that he …

Development Of Electro-Mechanical Equipment For The Measurement Of Knock Characteristics Of Gasolines, Rudolph W. Ebacher

Mechanical Engineering ETDs

It was considered by the writer that characteristics of oscilloscope wave forms representing the varying pressures taking place in the CFR engine cylinder might provide an index to octane ratings of gasoline. Obtaining pressure wave forms on the oscilloscope required some medium for providing an electrical signal in response to engine cylinder pressures. A quartz pressure element was considered as the item that could fulfill this requirement.

An Attempted Determination Of The Approximate Chemical Composition Of The Livingston Volcanics By The Fused Bead Technique, Robert D. Geach

Bachelors Theses and Reports, 1928 - 1970

Many fine-grained igneous rocks, basaltic and felsitic in character, are difficult to classify. In numer­ous cases, it is impossible to classify these types of rocks by quick methods of identification. It was hoped at the beginning of this study that refractive indices of glasses formed by quick artificial fusion of samples from selected suites of igneous rocks would show a close cor­relation in chemical composition.

Dispersing Agents In The Pipette Method Of Soil Analysis, Eugene W. Price

Bachelors Theses and Reports, 1928 - 1970

For many years the study of sediments has been a major problem in the field of geology. Especially is this true of the branch of sedimentology known as grain-size distribution. Throughout the years many classical experiments have been performed and procedures evolved from them, all with the purpose of a better and easier determination of the grain-size distri­bution of fine sediments, particularly the clays.

News Bulletin - May, 1952, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A five page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. This organization was a predecessor of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Proposed Special Specification For Reflectorizing Glass Spheres, James H. Havens

Kentucky Transportation Center Research Report

In response to your request for a specification that will apply to glass beads for reflectorizing surfaces of signs, paints, and other night driving aids, we recommend the attached material which is drawn up in the form of a proposed specification. In general, the procedures. and ranges of performance characteristics conform with things that have been discussed by the A.S.T.M. Subcommittee on Traffic Paints. Actually, A.S.T.M. has not adopted a specification, but probably they will have one within the next year or two.

You will note the refractive index and size distribution or gradation are referred to in the specification, …