Engineering Commons^™

Use Of Precast, Prestressed Concrete For Bridge Decks : Progress Report, James H. Ford

JTRP Technical Reports

No abstract provided.

Tests Of Prestressed Concrete Beam Splices, Martin J. Gutzwiller, Robert H. Lee

JTRP Technical Reports

No abstract provided.

The Gcars Ii System : Technical Paper, A. Keith Turner

JTRP Technical Reports

No abstract provided.

The Gcars System Fortran Iv Programmers Manual, Part A - Programs For Data Collection And Evaluation Part 3 A, A. Keith Turner

JTRP Technical Reports

No abstract provided.

The Gcars Fortran Iv Programmers Manual, Part B - Programs For Generation Of Alternatives Part 3 B, A. Keith Turner

JTRP Technical Reports

No abstract provided.

Additional Magnetic Disaccommodations In Ternary Iron Base Alloys, R. H. Graham, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

On The Influence Of Surface Roughness On The Determination Of Diffusion Constants, Manfred Wuttig

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Inventory Of Indiana County Bridges, Jean E. Hittle

Indiana Local Technical Assistance Program (LTAP) Publications

The purpose of this report is to bring county bridge needs into focus-state-wide and county-by-county-through a detailed computerized inventory listing of all existing county bridges. Each county's inventory listing has been further summarized as to the number of bridges by length and width categories, along with an estimated replacement cost. This inventory report thus gives a measure and dimension to the county bridge problem. Hopefully this information will assist local road officials, legislative study groups, and members of the General Assembly in weighing alternate solutions to the financing of county bridge programs.

1969 Handbook Of Facts And Figures On Indiana County Roads—Including Directory Of County Highway Departments, Jean E. Hittle

Indiana Local Technical Assistance Program (LTAP) Publications

This handbook will assist county road officials in the planning of county road operations. The data and information included in this handbook are either statistical or public information which are already available from the official sources, but which needed to be brought together for convenient distribution and use.

Evaluation Of The Performance Of Ultrasonic Equipment For Pavement Thickness Measurements, Charles F. Scholer, Raymond Doran Pavlovich

JTRP Technical Reports

No abstract provided.

A Study Of The Behavior Of Reinforced Concrete T-Beams Subjected To Repeated Loads, Robert S. Platoni

JTRP Technical Reports

No abstract provided.

Plan Design Model For Urban Area Use Allocations : Draft Copy, W. Don Stewart, William Louise Grecco

JTRP Technical Reports

No abstract provided.

The Irish Plumbing And Heating Engineer, January 1969 (Complete Issue)

Building Services Engineering

No abstract provided.

Shock Shields, Asbjorn Kvammen Jr.

Civil Engineering ETDs

A series of tests was conducted to obtain information concerning the effectiveness of a shock shield of reinforced concrete between ground surf ace and a buried structure as a means of reducing the shock transmitted to the structure due to airblast loading. Two shock shields were used. The diameter of both shields was 20 inches and the thicknesses were 6 inches and 2 feet. The structure was 20 inches in diameter with a thickness of 5 feet. Tests were performed in a 2- by 40-foot shock tube without shock shield and structure, with structure only, and with different thicknesses of …

Mass And Heat Transfer Through Nonwettable Porous Membranes, Chung-Liang Yeh

Doctoral Dissertations

"Evaporation of water through nonwettable porous membranes has been studied under various pressures with various membrane thicknesses. The results of previous investigations at 1 atmosphere have been correlated into one equation for mass transfer resistance which has also been found to fit approximately new data obtained of 1.5, 2, and 3 atmospheres in this investigation. In the new data fluxes varied from 0.064 to 0.691 lb./ft.²/hr. through glass fiber-Teflon membrane from 0.02 to 0.08 inch in thickness. Temperatures ranged for 80 to 260°F. A more theoretical equation has been developed to explain variations from the equations based on 1 atmosphere …

Models For The Pn Diode And The Npn And Pnp Transistor For Use In Computer Aided Design And Analysis Programs, Glenn Ronald Case

Doctoral Dissertations

"This work is concerned with the problem of developing suitable mathematical representations for the pn junction diode and npn and pnp transistors for use in computer aided design and analysis programs. The Ebers-Moll model as used in the Net-1 program has been considerably improved, particularly regarding base resistance prediction, prediction of high forward current behavior, and the addition of reverse breakdown terms. The resulting models show substantial improvement in representation of d-c and transient characteristics. Some improvement in a-c characteristics has also been obtained. Methods of obtaining parameters for the new model and several of the present models, given measured …

Phase Equilibria And Thermodynamic Studies In The System Ca0-Fe0-Fe₂0₃₋Si0₂, Muharrem Timucin

Doctoral Dissertations

"A study of phase relations and thermodynamic properties of phases in the system CaO-FeO-Fe₂O₃-SiO₂ was conducted at 1450°C and 1550°C. The region of stability of the different phases was determined by microscopic examination of the specimens. The thermodynamic properties of liquid were determined by analyses of quenched samples equilibrated at oxygen pressures from about 10⁻¹¹ to 1 atm. Isothermal phase diagrams were constructed from data for 0, 5, 10, 20, and 30 weight percent silica sections of the CaO-FeO-Fe₂O₃-SiO₂ system, and the effect of temperature and increased silica additions on the oxygen solubility of the liquid oxides was measured. Multicomponent …

Numerical Inversion Of The Laplace Transformation And The Solution Of The Viscoelastic Wave Equations, Abbas Ali Daneshy

Doctoral Dissertations

"In the numerical inversion of Laplace transform two general techniques of inversion are analyzed; a study of the procedures based on an expansion of f̄(s) by a polynomial in 1/s (Salzer's method) provides accurate results for certain ranges of t. A curvature criterion for the selection of the range of points for polynomial interpolation, and a geometric distribution in this interval markedly improves the range and the degree of accuracy of inversion. The results may be further improved by multiplying f̄(s) by 1/s of 1/s². Other procedures are based on approximation of f̄(t). This investigation includes a general review of …

Signal Distortion In A Regenerative Frequency Divider, Carl Ray Ryan

Doctoral Dissertations

"A regenerative frequency divider can be constructed with one integrated circuit and a single-pole tuned circuit. The divider can be used as a means for reducing the modulation index of either deterministic or random signals. This reduction in modulation index can simplify many signal processing schemes. This technique can be used up to S-band frequencies. The mathematical model of the regenerative frequency divider corresponds very closely to that of a first order Phase Locked Loop (PLL). The loop gain is determined in part by the nonlinear element used in the feedback loop. The loop gain is also proportional to the …

Spherical Antenna Array, Narong Yoothanom

Doctoral Dissertations

"The far field radiation pattern of an isotropic spherical antenna array with two types of element distributions, a latitude-longitude distribution and an approximately equally-spaced distribution, has been analyzed using Poisson's Sum Formula. Beamwidth expressions of both element distributions are found in various planes. All numerical results are given only for the case of 21 rings"--Abstract, page ii.

X-Ray Determination Of Lattice Parameters And Thermal Expansion Coefficients Of Aluminum, Silver And Molybdenum At Cryogenic Temperatures, Claude Lowell Woodard

Doctoral Dissertations

"A multiple exposure back reflection diffraction camera was designed to mount on the vacuum jacket of a pressurized helium gas "Cryomite". With this design it is possible to obtain six diffraction exposures on a single film at any temperature in the range of 180 to 25°K. temperatures within this range are reached in short intervals and exposure periods are less than 30 minutes in a 2.875 inch (73.03 mm) diameter camera. Some of the advantages of this design are; direct measurements, multiple exposures on a single film, short exposures, direct compensation of film length changes due to evacuation or processing …

Turbulence Measurements In Drag Reducing Flow, Jorge Mario Rodriguez

Doctoral Dissertations

"Studies of the frequency response of hot-film wedge probes in viscoelastic fluids established their reliability as measuring devices and demonstrated that the objections raised by Metzner and Astarita (77) are not valid for wedge probes. The structure of turbulence in drag reducing soap and polymer solutions was studied using a hot-film wedge probe. Intensity of turbulence measurements in drag reducing fluids indicate that the structure of trubulence is strongly dependent on the condition of the solution. Rates of energy dissipation calculated at the center of the tube indicate that there is an increase in the rate of energy dissipated in …

Grain Boundary Self-Diffusion In Sodium Chloride, Kenneth Ray Riggs

Doctoral Dissertations

"The diffusion of ²²sodium and ³⁶chlorine along tilt and twist grain boundaries in pure and calcium chloride doped sodium chloride bicrystals was investigated. No enhanced diffusion of ²²sodium along the grain boundaries was observed. Between 400°C and 500°C the chlorine grain boundary diffusion parameter, D'Δ, is described by D'Δ = (D'Δ)₀exp (-Q_b/kT), where (D'Δ)₀ is approximately 10⁻⁷ cm³/sec and Qb is 1.15 ± .30 eV. The grain boundary angle, the grain boundary character (tilt or twist), and the calcium chloride concentration appear to have no pronounced effect upon the observed chlorine grain boundary diffusion. The ionic movement …

A Study Of The Anodic Oxidation Of Acetylene On Platinum-Gold Alloys, Christopher Kuo-Chieh Wu

Doctoral Dissertations

"The anodic oxidation of acetylene on Pt-Au alloys of four compositions (80-20, 60-40, 40-60, and 20-80 Pt-Au) was studied at 80°C in solutions of constant pH and unit normality. Currents were measured as a function of potential and partial pressure of acetylene. The effects of temperature on current in 1 N H₂SO₄ and 1 N NaOH and the coulombic efficiencies for CO₂ production were determined. The experimental results indicated that the alloys can be classified into three groups, Pt-rich, Au-rich, and intermediate compositions. A transition region (change of the mechanism) was found for the Au-rich alloys. The oxidation can be …

Dynamic Response Of Circular Plates To Transient And Harmonic Transverse Loads Including The Effect Of Transverse Shear And Rotary Inertia, Perakatte Joseph George

Doctoral Dissertations

"Using an improved theory of plate vibration suggested by R. D. Mindlin which takes into account the effects of transverse shear and rotary inertia, free and forced transverse vibrations of uniform circular plates are studied and the results compared with those obtained using the classical theory of plate vibration. The governing equations are developed in polar coordinates using the equations of elasticity. Frequency equations for axisymmetric and antisymmetric vibrations are derived for solid circular plates under different boundary conditions and for an annular plate rigidly mounted on a shaft. The response of plates to different types of rapidly applied axisymmetric …

A Crystallization Study Of A Tetrasilicic Fluormica Glass, William H. Daniels

Doctoral Dissertations

"The transformation of a synthetic mica composition K₂Mg₅Si₈O₂₀F₄ from amorphous to crystalline structure was studied isothermally at selected temperatures from 560°C to 1150°C. thermal changes associated with the transformation were followed by differential thermal analysis techniques. Structural changes promoted by the isothermal treatments were observed by density measurements, Debye-Scherrer X-ray diffraction techniques, electron replication microscopy, and electron scanning microscopy. Isothermal treatment at 450°C for 9 hours produces structural ordering in quenched K₂Mg₅Si₈O₂₀F₄ glass. Fluorine exerts a significant influence on the transformation temperature; decreasing amounts of fluorine producing increasing transformation temperatures. The crystallizing phase rapidly attains a limiting particle size and …

A Finite Element Method For Geometrically Nonlinear Large Displacement Problems In Thin, Elastic Plates And Shells, Ronald August Melliere

Doctoral Dissertations

"A finite element method is presented for geometrically nonlinear large displacement problems in thin, elastic plates and shells of arbitrary shape and boundary conditions subject to externally applied concentrated or distributed loading. The initially flat plate or curved shell is idealized as an assemblage of flat, triangular plate, finite elements representing both membrane and flexural properties. The 'geometrical' stiffness of the resulting eighteen degree-of-freedom triangular element is derived from a purely geometrical standpoint. This stiffness in conjunction with the standard small displacement 'elastic' stiffness is used in the linear-incremental approach to obtain numerical solutions to the large displacement problem. Only …

An Optimization Approach To Well Spacing For Gas Storage Reservoirs, Jagannath Rao Ghole

Doctoral Dissertations

"A finite approximation to the conventional diffusivity equation describing compressible fluid flow through porous media has been developed with a view to apply it to the problems of optimum well spacing. An equilateral grid system has been employed to enable uniform well spacing for any number of wells. A numerical model has been developed on an IBM 360 - Model 50 computer, which simulates the pressure and saturation transience in the reservoir due to production impulses. This model has been used to maximize with respect to number of wells, the minimum well bore pressure reached throughout the specified withdrawal schedule. …

Calorimetry Of Room Temperature Deformed Copper, George Juri Filatovs

Doctoral Dissertations

"An adiabatic anisothermal differential calorimeter for the study of room temperature deformed 99.999% pure copper has been constructed. An annealed and a deformed specimen were heated at a constant rate in adiabatic surroundings and the differences in energy released between samples was obtained. The control circuits were automatic. Deformation was by elongation ranging from 12 to 40%, and the corresponding energy found was from 1.9 to 5.3 calories/gram-atom. No recovery energy was found. The results obtained generally agree with published results and, in particular, verify Gordon's isothermal annealing results. It is proposed that the criteria for the presence of recovery …

Improvement In Target Detection With A Frequency Agile Pulsed Non-Coherent Radar, Kenneth Lee Horn

Doctoral Dissertations

"Frequency agile tracking radars have received considerable attention in the literature. Frequency agility is useful in reducing target scintillations, thereby reducing tracking errors under certain conditions. However, little attention has been devoted to the improvement that can be expected in target detection with a frequency agile radar. In the past, complete pulse-to-pulse decorrelation of the target returns has been assumed for all of the analyses concerning target detection with frequency agile radars. This assumption always implies a transmitter with a large bandwidth.

This dissertation analyses a pulsed non-coherent frequency agile radar applied to Swerling's Case I target. The target model …