Engineering Commons^™

Energy Aspects Of Rural School Bus Transportation, Kirk R. Hastain, Frank A. Gerig

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In an effort to determine the effect of rural school bus transportation on energy consumption, a study was made of a rural school district in Central Missouri. The school district's bus system was studied, records of fuel and maintenance costs were analyzed, and discussion held with supervisor and bus drivers. An effort was made to recommend ways by which energy could be conserved, without jeopardizing the welfare of the students.

Multimodal Analysis Of The Western Coal Transportation System, Kenneth Ebeling, Kam Li

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Points raised in the coal slurry pipeline issue imply a need for an analysis of the multimodal alternatives within the context of the existing western transportation system. In reporting the initial results of the first study of its kind, this paper includes a brief description of the data base and computer routines used to construct a base case and ideal case senerios of the western coal transportation issues.

Transporting Coal In Containers Through Pipeline -- A Feasibility Study, Henry Liu

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A preliminary assessment of the feasibility of transporting coal in containers suspended in water moving through pipes - the concept of hydraulic capsule (container) pipelining (HCP) - is presented. The assessment includes technical (engineering), environmental, social and economic considerations. A tentative conclusion reached is that HCP transportation of coal is technically feasible (although it needs further research and development works), socially and environmentally beneficial, and economically justifiable in a number of situations.

An Architectural Application For Fchart (Solar Feasibility In The Midwest), Rodney Wright, Larry Dieckmann

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Examination of climatic conditions in the twelve Midwestern states of Illinois, Indiana, Iowa, Kansas, Michigan, Minnesota Missouri, Nebraska, North Dakota, Ohio, South Dakota, and Wisconsin reveals that this region receives from 50% to 70% of the possible annual total hours of sunshine.

Degree day heating requirements range from 4,000DD to over 10,000DD per year. In the northern tier of states, some areas require heat at some time in each month.

The FCHART Method for Solar Heating Design, developed at the Solar Energy Laboratory at the University of Wisconsin, is a method for making a computer study of solar capability for …

Principles Of Design Of A Solar Heated House, Alex Stefanovic, Chaman Kashkari

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper explains the principles of design of a solar heating system for a house in Akron, Ohio area. The house is a standard one family, two story house, such as Ryan Home's Brockington model. It has, approximately, 2,000 square feet of living area, a full basement, and an attached two car garage. The solar heating system is designed to provide as much of the heating needs as is economically feasible.

An Analysis Of Solar Heating Costs In Arkansas Broiler Houses, Ralph Gunderson, J. Martin Redfern

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This study is based on the computer simulation model of a solar heated broiler house in four locations in Arkansas. This simulation model estimated the annual energy savings in each broiler house due to the installation of a solar heating system. This paper uses present value analysis to estimate the life cycle costs of heating conventional and solar heated broiler houses in the state of Arkansas. From these calculations, the number of years required to achieve a break-even cost of heating is estimated.

Innovations In Heat Pumps, Ronald Hunter Howell, Harry J. Sauer Jr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The status of the residential heat pump industry is reviewed. Some potential improvements in energy efficiency, operational reliability, and initial cost are described and delineated. These possible innovations include two-speed or variable speed compressors, reliable defrost initiation and termination, improved system components, modifications to the basic thermodynamic cycle, add-on-heat pumps, solar assisted heat pumps, annual cycle energy system, chemical heat pumps, and gas fired heat pumps.

Sizing Of Air-Conditioning Systems -- The New Methodology, Harry J. Sauer Jr., Ronald Hunter Howell

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Accurate cooling load calculations for sizing air-conditioning equipment are more important today than ever. Properly sized equipment saves energy. This paper briefly describes a new method developed by ASHRAE for such calculations .

Design And Operational Characteristics Of A Retrofit Solar Heating System, D. J. Wetteroff, Bassem F. Armaly

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The construction and the operation of a retrofit solar assisted space heating system are described. Performance characteristics of each component were measured and used to estimate the contribution of solar energy to the yearly space heating energy requirements.

Comparison Of Stirred And Immobilized Cell Reactors For Ethanol Production, Oliver C. Sitton, J. L. Gaddy

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Biomass can be converted to sugars by hydrolysis with enzymes or mineral acids. These sugars can be converted into a number of chemical intermediates in biological reactors. Biological reactions are generally slow and selection of the most efficient reactor is important in these applications.

Immobilized cell reactors allow high cell densities and high throughput by attaching microorganisms to a fixed support. This paper compares the rate of production of ethanol from glucose by Saccharomyces Cerevisiae in a packed column and a stirred reactor.

Continuous stirred reactor studies showed a washout rate of .27 hr^-1. The optimum rate of …

University Of Missouri--Rolla Wood Energy Research, Yildirim Omurtag, V. J. Flanigan, Nathan E. Welch

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The overall objective of this project is to conduct a research and development program which will lead to the early commercialization of wood gasification technology to process wood residues typical of those found in the Ozark region.

Concentrated Organic Separations By The Cyclic Indirect Freezing Process, Jeffrey Carl Miles

Chemical and Biological Engineering ETDs

This study demonstrates the technical feasibility of purifying concentrated organic solutions by the cyclic indirect freezing process with in-situ washing and in-situ melting operations. The key to a successful purification in the freezing process is a near plug flow displacement of unfrozen liquor from the bed in an in-situ washing operation. To be successful, a freezing step has to be initiated uniformly and a high permeability bed has to be formed uniformly throughout the freezing conduits. In the study, a nucleation technique based on pressure induced supersaturation has been used to accomplish a uniform initiation and a pressure induced freezing …

Acuta Enews October 1978, Vol. 7, No. 10

ACUTA Newsletters

In This Issue

PRESIDENT'S MESSAGE

PARTY LINE

DATA BITS

NEWS FROM REGION 1

BITS & PIECES

MOUTH OF THE SOUTH

VIRGINIA VIEW

POTPOURRI

Enhancement Of Pneumatic Nebulization Efficiency Through Application Of An Electric Field, Richard N. Savage, G. M. Hieftje

Materials Engineering

A novel technique is described for reducing the size of aerosol droplets produced by a pneumatic nebulizer of the kind commonly used in flame or plasma spectrometry. The technique involves the application of an electric field to the tip of the nebulizer, resulting in an induced surface charge on the liquid being nebulized. In turn, the surface charge reduces the liquid's surface tension and results in the generation of a finer aerosol. In this study, the effect of the electric field is quantified in terms of the spatial dispersion and size distribution of aerosol droplets formed in the presence and …

Ole Miss Engineer 1978

Ole Miss Engineer

No abstract provided.

Ua77/1 Western Alumnus, Vol. 49, No. 6, Wku Alumni Association

WKU Administration Documents

Alumni magazine published by WKU. This issue has the following articles:

• Dero Downing Steps Down
• Douglas, Michele. Top Banana – Gary Riggs
• Egan, Sherry. WKU State Climatic Center
• Gibson, Debbie. I Kind of Believe It’s a Gift – Burt Feintuch, Folk Music
• New on the Gridiron
• Adams, Bob. Digital Voltmeter – Engineering Technology
• Schock, Jack. The Projectile Point – Archaeology
• Armstrong, Bryan. Confessions of a Journalism Intern
• Highland, Jim. Terry Climer
• Beauchamp, Donnie. Commonplace Things – Photography
• Miller, Richard. The Exceptional Student – Psychology, Biology
• Harry Snyder Speaks at Commencement
• Douglas, Michele. Students Take Advantage of Study Trips Abroad
• Western …

Irish H & V News

Building Services Engineering

No abstract provided.

Phosphorus Content And Release From Lake Sediments By Agitation, Hsien Ping Tang

Retrospective Theses and Dissertations

Man-made mixing in shallow lakes will resuspend bottom sediments and increase phosphorus concentration in the water body. The increase in phosphorus content may affect the lake productivity. During the course of this study, a better understanding of the water-sediment-phosphorus relationships of some shallow lakes in Central Florida was attempted. Column studies and batch experiments were used to investigate the effect of mechanical mixing on the release of phosphorus from bottom sediments collected from Lake Claire and Jessup. The particle size distribution and density distribution of the bottom sediments were studied and the release of phosphorus from each fraction was measured. …

Speech Synthesis Utilizing Microcomputer Control, Joseph N. Uzel

Retrospective Theses and Dissertations

This report explores the subject of speech synthesis. Information given includes a brief explanation of speech production in man, an historical view of speech synthesis, and four types of electronic synthesizers in use today. Also included is a brief presentation on phonetics, the study of speech sounds. An understanding of this subject is necessary to see how a synthesizer must produce certain sounds, and how these sounds are put together to create words. Finally a description of a limited text speech synthesizer is presented. This system allows the user to enter English text via a keyboard and have it output …

Energy In Agriculture: Dryeration Performance Evaluation, Otto J. Loewer, Thomas C. Bridges, G. M. White, Robert L. Fehr, Larry W. Turner

Agricultural Engineering Energy Series

When grain is dried using continuous flow or portable batch dryers it must be cooled before it is placed in storage. The cooling process removes the sensible heat that was used to bring the grain temperature up to the drying air temperature, and hopefully reduces the grain temperature to a point where mold growth is no longer a problem. Unfortunately, rapid cooling of grain results in increased grain damage in terms of stress cracks, and is an energy-inefficient process in that the heat stored in the grain is not used for any useful purpose.

Energy In Agriculture: Performance Evaluation For Natural Air And Low-Temperature Drying Systems, Otto J. Loewer, Thomas C. Bridges, G. M. White, Robert L. Fehr, Larry W. Turner

Agricultural Engineering Energy Series

Natural air and low-temperature drying systems are generally not recommended for Kentucky because of their slow drying rates. In such systems the grain near the top of the drying bin may remain undried for an extended period of time, possibly leading to grain spoilage and/or the production of aflatoxin.

Energy In The Home: Grain Drying Performance Evaluation, Otto J. Loewer, Thomas C. Bridges, G. M. White, Robert L. Fehr

Agricultural Engineering Energy Series

When grain is harvested in Kentucky at moisture contents exceeding 13 to 14 percent, it must be dried to insure long-term safe storage. The drier the stored grain, the longer it will retain its quality.

Warrants For Left-Turn Signal Phasing, Kenneth R. Agent, Robert C. Deen

Kentucky Transportation Center Research Report

Warrants for the installation of left-turn phasing were developed. A review of literature was conducted along with a survey of the policies of other states. Field data of delays and conflicts were taken before and after installation of exclusive left-turn signalization. Left-turn delay studies were conducted at intersections with varying volume conditions. Analysis of the effect on accidents of adding a left-turn phase was made. The relationship between left-turn accidents and conflicts was investigated. Other types of analyses concerning gap acceptance, capacity, and benefit-cost ratios were also performed.

It was found that exclusive left-turn phasing significantly reduced left-turn accidents and …

A Rational Thickness Design System For Asphaltic Concrete Overlays, Herbert F. Southgate, Gary W. Sharpe, Robert C. Deen

Kentucky Transportation Center Research Report

A method of designing asphaltic concrete overlays has been developed making use of (1) Kentucky's proposed design curves, (2) an estimate of future traffic and the associated fatigue (five procedures are presented according to types of information available), (3) strength of subgrade on subject project (laboratory CBR tests or results of dynamic in-place tests such as the Road Rater), and (4) present condition of the existing pavement (from dynamic in-place tests, roughness measurements, or present serviceability index). Deterioration was expressed as reduced thicknesses of new-quality materials producing the same measured dynamic deflections. The total thickness for the predicted traffic minus …

Simulation Of Travel Patterns For Small Urban Areas, Jerry G. Pigman, Robert C. Deen

Kentucky Transportation Center Research Report

The objective of this study was to develop models which would simulate internal-external trips and external-external (through) trips. Regression analysis and cross-classification of data were tested in an attempt to predict the number of internal-external trips and the percentage of through trips. Regression analysis was used in the development of a through-trip distribution model. Grouping data for analysis created some problems; however, trial-and-error evaluation enabled selection of variables which produced reasonable results. Variables found to be most significant in the development of internal-external models were population and employment. For through-trip models, variables used were population, functional classification, AADT at the …

The Design And Analysis Of A Unique Broadband Underwater Acoustic Source, Allan Mark Young

Retrospective Theses and Dissertations

Requirements exist for a unique type of underwater acoustic source. The transducer is in the form of a linear array of discrete elements and is required to have a constants transmitting voltage response and carefully controlled directivity characteristics over a two octave bandwidth. A generalized model of a linear array of cylindrical piezoelectric ceramic acoustic radiators is developed and applied to the design of a prototype which operates over approximately one half of the required bandwidth. The prototype transducer was built and the measured results are compared with those predicted by the model. Recommendations are made for improving the performance …

An Analysis Of The Effect Of Vibration Sensitivity On Hydrophone Design, George Dickson Hugus

Retrospective Theses and Dissertations

Hydrophones used in the ocean produce spurious outputs due to vibration sensitivity which can severely degrade measurement accuracy. Sources of these vibration inputs are ocean surface waves, flow turbulence, and induced mechanical vibration. The hydrophone response to these vibrations is a noise voltage output. This can leave to a signal-to-noise problem particularly when measurements of small sound pressure levels are to be made. The objective of this thesis is to analyze the vibration response of three typical piezoelectric hydrophone sensor elements configurations and give design methods and constraints for reducing the problem of vibration sensitivity to an acceptable level. The …

Effect Of Precursor Heating On Radiating And Chemically Reacting Viscous Flow Around A Jovian Entry Body, Kuo Yen Szema

Mechanical & Aerospace Engineering Theses & Dissertations

The influence of changes in the precursor region flow properties (resulting from absorption of the radiation from the shock layer) on the entire shock layer flow phenomena around a Jovian entry body is investigated under physically realistic conditions. In the precursor region, the flow is considered to be inviscid and the variations in flow properties are determined by employing the small perturbation technique as well as the thin layer approximation. The flow in the shock layer is assumed to be steady, axisymmetric and viscous. The analysis is carried out by considering both the chemical equilibrium and nonequilibrium composition of the …

Interaction Between Structures And Fluids, Rahim Falsafi-Haghighi

Dissertations

A finite element model for the study of solid-fluid interaction, with applications in flow-induced vibration analysis of reactor vessel and heat exchanger internals, is presented. The model is based on the discretization of the solid equation of motion and the fluid continuity and momentum equations and employs the solid displacements together with the fluid pressure and velocity components as the nodal degrees of freedom. This permits a realistic and accurate implementation of boundary conditions, in contrast with methods using solid displacements and fluid pressure as the only field variables. The numerical solution of the resulting matrix equation, involving non-symetric matrices, …

The Measurement Of Depolarized Radiation For Monitoring The Mass Concentration Of Particulates, Bruce E. Wilson

Theses

The depolarization of backscattered polarized incident radiation which is expressed as a depolarization ratio was investigated as a means of monitoring the mass concentration of particles in stacks from coal-fired burners. This involved the design of an instrument that would detect small levels of radiation. Two methods were investigated. The first utilized a Gallium Arsenide laser and a silicon detector diode; the second was composed of a xenon flash lamp and a photomultiplier detector tube.

The relationship between the depolarization ratio and the mass concentration of diamond particles in the 0.01 gm/m³ to 0.5 gm/m³ was determined. Diamond …