Engineering Commons^™

Some Aspects Of Dimensioning And Tolerancing Of Mechanical Engineering Drawings, B. Krayer

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Materials Testing And Consultancy For The Tanzanian Industry, H. Fallenbach

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Energy Considerations In Tanzania, A Makange

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Windmill Installations In Tanzania, R Reichel

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Hydrauilc And Structural Design Of The Hydromet Station On Sinza River, E Kasenene

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Effect Of Unbalanced Voltage Of Operation Of Polphase Induction Motor Part Ii, H Kabisama

Tanzania Journal of Engineering and Technology (TJET)

During the assessment of the manuscript, it was observed that the paper does not include an abstract. The document proceeds directry to the main content without providing a separate abstract that summarize the study's objectives, methodology, key findings and conclusions

Some Facts And Prospects For The Establishment Of Television Broadcasts In Mainland Tanzania, H. R. Mgombelo

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Investigation Of Corrosion And Weathering Phenomena In Tropical Marine Environment, K. P. Stormer

Tanzania Journal of Engineering and Technology (TJET)

Abstract

The Efficiency Of A Two-Edged Tool And Its Improvement, J. R. Masuha

Tanzania Journal of Engineering and Technology (TJET)

Abstract

Design Of A Bit-Slice Processor, Kenneth Earl Green

Electrical and Computer Engineering ETDs

A microprogrammed computer processor unit is designed using bit-slice technology. This processor executes the PDP-11/45 instruction set. The performance is evaluated and compared to other existing processors.

Experimental, Analytical, And Numerical Studies On Multiconductor Transmission Lines, Ashok Kumar Agrawal

Electrical and Computer Engineering ETDs

The time-domain transmission-line equations for uniform multiconductor transmission lines in a conductive, homogeneous medium excited by a transient, nonuniform electromagnetic field, are derived from Maxwell's equations. Depending on how the line voltage is defined, two formulations are possible. One of these formulations is considerably more con­venient to apply than the other. The assumptions made in the derivation of the transmission-line equations and the boundary conditions at the terminations are discussed. For numerical calculations, the transmission­line equations are represented by finite-difference techniques, and numerical examples are included.

An effective method for computing the time-domain response of loss­less multiconductor transmission lines with …

Use Of Thermal Storage For Load Management In A Solar-Augmented Heat Pump System, James Thomas Schmitz

Mechanical Engineering ETDs

Electric utilities are today faced with the dilemma of satisfying increasing demands for electrical energy while their ability to build new power plants is being severely curtailed primarily due to environmental concerns. By redistributing the power demand of individual customers (and thus the utility) with respect to time, greater overall electricity consumption can be met without increasing the generating capacity of the utility. This redistribution can be accomplished using thermal energy storage at the customer’s location. For heating and cooling of buildings, thermal storage, combined with off-peak period operation of the mechanical system's major electricity consuming equipment, can lower peak …

Computer Assisted Instruction Wood Identification Program, Dave Moyer

Graduate Research Papers

In the development of wood identification skills, certain factors are important. These include: mastery of both terminology and technique, repetitive practice experiences, and an individualized approach in both guidance and feedback to the learner. The use of the computer as a programmed instructional aid provides for an individualized approach to learning, simulated teacher-student interaction, and feedback and reinforcement to stimulate learning. The problem of this activity is to develop a computer assisted instructional program to enable the learning of techniques for identifying selected samples of hardwoods.

The Compatibility Of Mild Carbon Steel And Water In A Heat Pipe Application, David D. Kenney

Mechanical Engineering ETDs

The phenomena that govern the performance and affect the lifetime of heat pipes are reviewed. The phenomena include the corrosion of metals by aqueous solutions, the diffusion of gases through metals, and the effects of hydrogen on metals. Heat pipes of 1015 C.D. carbon steel were fabricated and operated with a control group of 304 stainless steel heat pipes over the temperature range from 140° to 300° C. Results indicate that carbon steel/water heat pipes perform as well or better than 304 stainless steel/water heat pipes over the temperature range covered in this test.

State Estimation Using Parallel Extended Kalman Filters Of Nonlinear Measurements, Thomas Carlyle Sheives

Electrical and Computer Engineering ETDs

The extended Kalman filter applied to state estimation using nonlinear measurements has demonstrated divergence in many applications involving large initial uncertainties because of "invalid" linearizations performed by the filter on the nonlinear measurement functions. No quantitative results can be found as to how invalid these linearizations must be before divergence occurs. This report attempts to fill this void by deriving the extended Kalman filter as an approximate nonlinear least squares estimator, through the minimization of a measurement squared error function. The convergence of the extended Kalman filter is then determined by examining the squared error function and verifying the usefulness …

Ole Miss Engineer 1979

Ole Miss Engineer

No abstract provided.

Development Of An Integrated Program Of Water Reuse In A Pulp And Paper Mill, Zafar M. Chaudhri

Masters Theses

No abstract provided.

Acuta Enews December 1979, Vol. 8, No.12

ACUTA Newsletters

In This Issue

THE 1980'S: A TELECOMMUNICATION OPPORTUNITY

BITS & PIECES

THE USER'S CHOICE

COMMUNICATIONS SYSTEMS FOR EXTENDED CONTROL

Phase Equilibria For Iron-Rich Fe-Cu-C Alloys: 1500 To 950°C, Krishna Parameswaran, Kenneth Metz, Arthur E. Morris

Materials Science and Engineering Faculty Research & Creative Works

Isothermal sections for the iron rich corner of the Fe-Cu-C system have been constructed at 1500, 1450, 1200, 1172, 1150, 1000, and 950°C. A ternary invariant point exists at 1172°C where an iron rich liquid, a copper rich liquid, austenite, and graphite coexist. The iron rich liquid contains 3.7 wt pct Cu and 4.0 wt pct C. The austenite contains 7.3 pct Cu and 1.6 pct C. The copper rich liquid contains 2.4 pct Fe, and apparently very little carbon. The diagrams are used to explain the phenomena of "inverse segregation" that occurs during the solidification of iron rich Fe-Cu-C …

Evaluation Of Triaxial Testing Equipment And Methodologies Of Three Agencies, Tommy C. Hopkins, David L. Allen

Kentucky Transportation Center Research Report

To obtain reliable and consistent shear strength results, which are essential in the design of earth structures, from triaxial tests, careful attention, skill, and judgement must be given to testing procedures and equipment make-up. There are many sources of potential errors in the test, especially when pore pressures are monitored. Consequently, a question inevitably arises concerning tbe quality of triaxial test results obtained by different geotechnical laboratories. The intent of this study was to initiate and help establish a triaxial testing forum whereby any geotechnical laboratory engaged in triaxial testing can check the quality of their triaxial results, and therefore, …

Lee's Moment Method Applied To Binary Flow In Jet And Channel Devices Used For The Aerodynamic Separation Of Uranium Isotopes, Edward Eugene Holcomb

Mechanical Engineering ETDs

Lees' moment method is applied to the problem of compressible, binary flow of uranium hexafluoride gas through a parallel plate chan­nel. The time-dependent numerical problem is solved to yield the steady state solution. The results obtained are preliminary to the solution of the flow field for the curved nozzle and colliding jet devices used in the aerodynamic separation of uranium isotopes. Lees' concept of two-sidedness of the distribution function doubles the number of variables required to describe the system, and the resulting set of moment equations is not easily solved. The assumptions of isothermal, hydrodynamically fully developed flow are made …

An Experimental Study Of The Reactions Of Excited Neon Atoms In Pure Afterglow Plasmas Using Resonance Absorption Spectrometry, R. A. Sierra, J. Beverley Clark, A. J. Cunningham

Materials Science and Engineering Faculty Research & Creative Works

Resonance absorption spectrometry has been applied in a room temperature study of the reactions of excited neon atoms in pure afterglow plasmas. The pressure range 10-500 Torr was investigated. Lorentz broadened linewidths calculated using a simple classical interruption theory allowed fractional absorption signals as large as 98% to be analyzed and absolute excited-state concentrations to be determined. The first absorption studies of the decay of 1P1 excited atoms in neon afterglows are reported. Analysis of the decay profiles of the 3P2, 3P0 and 1P1 excited states allowed quenching rate coefficients for each state to be determined and the role of …

Center Pivot Irrigation In Nebraska: An Institutional Analysis Case Study, Thomas Nutt-Powell, Stewart Landers

Department of Agricultural and Biological Systems Engineering: Faculty Publications

This paper is one of a series resulting from institutional analysis of photovoltaic (PV) acceptance. It reports the results of a study of institutional factors influencing acceptance of center-pivot irrigation in the Nebraska agricultural community. Center-point irrigation (CP) was an interesting topic for study because (1) it was a major recently introduced technological innovation in agriculture which (2) had potentially detrimental attributes – water and energy intensity. A brief historical review of the introduction and acceptance of center-pivot irrigation in the Nebraska agricultural community is presented. Institutions which were a likely part of this institutional arena relative to CP introduction …

Separations Of Dilute Solutions By The Smooth Deposit Approach Of The In-Situ Indirect Freezing Process, Jeng-Hung Lue

Chemical and Biological Engineering ETDs

The main objective of the present study is to demonstrate experimentally the feasibility of applying the smooth deposit ap­proach of the in-situ indirect freezing process to the separations of both dilute organic mixtures and aqueous mixtures. The in-situ indirect freezing process with in-situ washing and melting opera­tions was first introduced by C. Y. Cheng and S. W. Cheng [1].

Atmospheric Implications Of Studies Of Central American Volcanic Eruption Clouds, R. D. Cadle, A. L. Lazrus, B. J. Huebert, L. E. Heidt, William I. Rose, D. C. Woods, Raymond L. Chuan, Richard E. Stoiber, D. B. Smith, Robert A. Zielinski

Department of Geological and Mining Engineering and Sciences Publications

During February 1978 a group of scientists from the National Center for Atmospheric Research, several colleges and universities, the U.S. Geological Survey, and NASA used a specially equipped Beech Queen Air aircraft to make 11 sampling flights in Guatemala through the eruption clouds from the volcanoes Pacaya, Fuego, and Santiguito. Measurements were made of SO₄²⁻, SO₂, HCl, HF, and 11 cations that were in water-soluble form, on samples collected by a specially designed filter pack. Particle size distributions were obtained with a piezoelectric cascade impactor, and the particles were identified by energy dispersive X ray …

Test 1334: Belarus 7100 Diesel (K-701) 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1333: Belarus 1500 Diesel (T-150k) 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Fire Safe Structural Steel: A Design Guide, Joseph Escalada, Georgi Hall, Brandon Matchen, Hoang Nguyen, Alexander Williams

CCFSS Library (1939 - present)

In 1974, the Constructional Steel Research and Development Organization (CONSTRADO) of England commissioned Ove Amp & Partners to prepare a detailed technical report setting out the most plausible models of flame projection from openings in building facades and the methods of calculating heat transfer from fires to exterior exposed steel columns. The report and an accompanying calculation method were completed in November 1975. In July 1975, the Subcommittee on Fire Teclmology of the Committee on Construction Codes and Standards of American Iron and Steel Institute commissioned a revised major extension of Ove Amp's work, and a two-volume report was completed …

Bulletin - November, 1979, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

An eight page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Corrective Measures For Unstable Bridge-Approach Embankment Us 68, Licking River, Blue Licks, E. Gregory Mcnulty

Kentucky Transportation Center Research Report

In January 1979, an in-depth investigation of the unstable bridge-approach embankment, Figure 1, on US 68 over the Licking River in the north central portion of Nicholas County (MP 91-68-B0027) was begun by the Division of Research. This investigation was a continuation of a project initiated by the Division of Materials in 1967. This site is approximately 0.3 miles (0.5 km) north of Stony Creek Road and approximately 7.5 miles (12.0 km) north of Carlisle and 0.8 miles (1.3 km) southwest of Blue Licks Battlefield State Park. The bridge is a three-span, continuous, welded plate girder structure with span lengths …