Engineering Commons^™

Bilin: A Bilinear Transformation Computer Program And Its Applications, John Dana Greer

Retrospective Theses and Dissertations

Given a transfer function for a differential equation model, an approach for obtaining a solution is by way of bilinear transformation. The bilinear transform approach is a numerical integration scheme which gives a discrete approximation to the differential equation solution. BILIN applies a series of polynomial transformations to the transfer function H(s). As a result, H(s) is mapped into the complex z plane obtaining the discrete transfer function H(z). From H(z), the difference equation is obtained whose solution y(nT) approximates the actual differential solution y(t). Hence, BILIN provides a means for obtaining discrete transfer functions for the design of digital …

A Parametric Study Of Economical Energy Usage In Freeze Tunnels, Marc A. Harrison

Retrospective Theses and Dissertations

An investigation into economical energy usage in freeze tunnels was conducted. Freeze tunnels are commonly used in the food processing industry to freeze products, and in some cases may use large amounts of electricity. An actual freeze tunnel was observed and modeled on a computer. A parameter study was conducted. The results of the parameter study indicated the efficiency and energy costs in freeze tunnels may vary widely. Important parameters included the Nusselt number, air temperature, and the ratio of fan work divided by the useful refrigeration effect. Although no single set of optimum conditions were found, methods for improving …

H & V News

Building Services Engineering

No abstract provided.

Inversion Of The Nonlinear Equations Of Reflection Ellipsometry For Uniaxial Crystals In Symmetrical Orientations, M. Elshazly-Zaghloul, R. M.A. Azzam

Electrical Engineering Faculty Publications

The complex ordinary (N_o) and extraordinary (N_e) refractive indices of an absorbing uniaxial crystal can be determined using reflection ellipsometry. The measurements are taken with the optic axis parallel and perpendicular to the crystal’s surface. The equations obtained are solved without resort to iterative methods; N_o and N_e are determined separately. Sixteen solution sets (N_o, N_e) are obtained and the correct solution can be easily identified. We present an optimum angle of incidence that minimizes the relative errors in N_o and N_e.

Ute Self-Determination In Setting Tribal Resource Development Policy, Herbert H. Fullerton, Mac Mckee, Roger D. Hansen

Reports

The Ute Indian Tribe of northeastern Utah has large land holdings rich in water and energy resources. Revenues from these sources have created capital that can potentially be used by the Tribe to further develop its resources and expand its agricultural and business enterprises. Realities, however, complicate this simple scenario in that the Tribal goals are broader than pure economic gain and that increased incomes may mean sacrifices in terms of these other goals. The Tribe faces the problem of how best to develop its water resources in a way that best meets its multiplicity of needs.

The research team …

Test 1354: Hesston Fiat 980dt And 980 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Lower Mode Response Of Circular Cylinders In Cross-Flow, William W. Durgin, P. A. March, Paul J. Lefebvre

Office of the Provost Scholarship

Transverse amplitude responses of a circular cylinder in cross-flow were determined as a function of reduced velocities for a variety of spring constants and damping coefficients. Maxima were found at reduced velocities of 5 and 16, and were of comparable amplitude. The first resonance, designated the "fundamental mode, " was due to normal vortex street excitation of the spring-mass system. The second resonance, designated the "lower mode," occurred when the natural frequency was approximately one-third of the normal vortex shedding frequency. By assuming that the driving force was sinusoidal, it was possible to evaluate the lift coefficients at resonance. Lift …

“Statistical Division” A Section From A History Of The Board Of Engineers For Rivers And Harbors, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

The “Foreign Ports Branch” of the Statistical Division of the Board of Engineers for Rivers and Harbors (BERH) was one of a number of small technical intelligence organizations within the Army Corps of Engineeers. The BERH was an agency within the Corps of Engineers performing civil functions concerning water resources functions. Its history and functions are described ably in this history.

The Foreign Ports Branch was established in August 1942 to prepare reports on foreign ports for use by the US Armed Forces. The BEHR was given this function because its personnel had long experience in preparing similar reports on …

Bulletin - June, 1980, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A six page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

A History Of The Board Of Engineers For Rivers And Harbors, Richard G. Waugh, Judith M. Hourigan

United States Army Corps of Engineers, Omaha District

CHAPTER I: THE BOARD IS ESTABLISHED
Theodore F. Burton • Constituting the Board

CHAPTER II: STARTING BUSINESS
First Board Members • Location • The First Reviews • Early Board Reviews • Public Hearings • Board Meetings • Expenses • Staff

CHAPTER III: THE MISSIONS OF THE BOARD
The Primary Mission • The Review Process • Assigned Missions • Planning Associates Program • Waterborne Commerce Statistics • Permanent International Association of • Navigation Congresses (PIANC) • Foreign Trade Zones • Processing Reports for State and • Washington-Level Agency Review • Former Missions • Marine Design • Transportation Economics • National Capital …

Mechanical Properties And Microstructure Examinations Of Aluminium-Steel Composites, Mervet Ibrahim Shenouda

Archived Theses and Dissertations

No abstract provided.

Discussion Of "Gas Composition, Temperature, And Pressure Measurements In A Lead Blast Furnace", Arthur E. Morris, John R. Knoepke

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

Solidification Of Aluminium Alloy Ingots, Hassan Abdel Kader Abdel Salam

Archived Theses and Dissertations

No abstract provided.

H & V News

Building Services Engineering

No abstract provided.

New Infrared Laser Lines In Argon, Krypton, And Xenon, E. L. Brown, M. A. Gundersen, P. F. Williams

P. F. (Paul Frazer) Williams Publications

Fourteen new infrared laser transitions in Ar, Kr, and Xe ranging from 3.725 to 17.233 pm are reported. All of the Kr laser transitions and all but one of the Ar and Xe transitions have upper levels in the s or d state: the majority of the transitions satisfy the condition ΔK = ΔJ. Identification of a previously observed, unidentified laser line at 5.804 μm in Ar is given.

Correlation Of Thixotropic Parameters And Related Tests Of Blood From Human Subjects, Walter Fabisiak

Dissertations

The flow behavior of human blood is an important facet of the circulatory system as it affects all of the organs of the body. The rheological properties of whole blood provide a means of analyzing the flow of red cells and plasma through the microcirculation. A recently observed rheological characteristic of whole human blood is thixotropy, a time-dependent phenomenon. This phenomenon is caused mainly by the redistribution of an aggregated form of erythrocytes, known as rouleaux, and the non-aggregated, single erythrocytes. In order to further define and analyze the thixotropic properties of blood, the Huang model is used to quantitatively …

Thixotropic Properties Of Whole Human Blood, Jen An Su

Dissertations

The rheological property of whole blood from various human subjects was studied with a Weissenberg Rheogonio-meter, modified with a continuously variable speed drive. Experimental data showed a hysteresis loop in the shear stress versus the shear rate plot and a torque-decay in the shear stress versus the shearing time plot which is under a constant shear rate. The rheological equation previously developed by Huang was employed to define the thixotropic parameters of each whole blood sample based upon the recorded rheograms.

The altered thixotropic parameters for the blood from patients with open heart surgery at different clinical stages were quantitatively …

The Minimum Maximal-Cube Covering Approach To Switching Theory, Yu-Tsang Gene Hwang

Dissertations

This dissertation is devoted to the construction of a new algebraic structure for the K-map so that algorithms and theorems can be derived for the minimization of Boolean functions and at the same time provide for the manipulation of Boolean functions as freely as one could on the K-map.

Computer programs have been included to demonstrate the theory and numerous examples of various complexity have been worked out in the appendices.

Temperature Dependency Of The Group Interaction Parameters In The Agsm And Unifac Models For The Prediction Of Heats Of Mixing, Ignatius Okoronkwo Ojini

Theses

A four-parameter group-contribution model (UNIFAC) has been developed for the prediction of heats of mixing of non-electrolyte mixtures. Both the UNIFAC and AGSM models are evaluated over a wide range of temperature dependencies of the group interaction parameters. The UNIFAC model has been chosen over the AGSM model and an optimum parameter-temperature relationship has been established.

Adopting the optimum temperature dependency, group inter-action parameters have been calculated using UNIFAC for the prediction of four types of mixtures: n-Alcohols/n-Alkanes; Benzene/n-Alkanes; Nitriles/n-Alkanes; Amines/n-Alkanes.

An Experimental Study Of Photopolymerization In A Continuous Stirred Tank Reactor, Songvit Setthachayanon

Theses

An experimental study was carried out on the control of CSTR by on-off regulation of light intensity for the photo-sensitized polymerization of styrene. The controllability of the reaction temperature, the advantages of operating at metastable states, and the molecular weights of the polymer formed were discussed. The influence of feed temperatures, sensitizer concentrations, and residence times on the reactor performance characteristics were also discussed. Experimental results showed that polymer formed at the metastable state had a higher average chain length and narrower molecular weight distribution than that formed at the low stable state. While increasing the residence time shifted the …

A Microprocessor Based Digital Logic Simulator, Kevin Dresher

Theses

It is the intent of this thesis to acquaint the reader with a tool which is available for use in the digital circuit design field. The reader is now able to totally simulate via DLS the digital logic design he creates on paper before it ever takes a hardware form. The computer program accepts a detailed description of the schematic and creates timing diagrams, loading statistics, cross references, and various lists for future documentation.

The user needs no programming knowledge and will find the requirements to run a simulation with DLS extremely user oriented. The simulation descriptions and command language …

The Characterization Of The Oxygen Transfer Capabilities Of Fermentors, Joseph Stephen Adamca

Theses

A method of characterizing the oxygen mass transfer capabilities of fermentors was developed where volumetric oxygen mass transfer coefficients are obtained using a modified sulfite oxidation method in conjunction with on line digital data processing. Carboxymethylcellulose is used in the reaction media to simulate the viscosity of typical non-Newtonian fermentation broths. Using this method, instantaneous values of volumetric oxygen mass transfer coefficients can be obtained for various combinations of agitation and airflow rates in different fermentor configurations. This data is useful in the scale up or scale down of fermentors.

Data obtained using this method have revealed that for a …

Analysis Of Unsteady-State Heat Conduction In A Cylinder With The Finite Element Method, Richard F. Bernard

Theses

Unsteady-state heat conduction in a cylinder of finite dimensions with constant physical and thermal properties was analyzed with the finite element method. Symmetry of the cylinder and application of Newman's method reduced the problem to two independent one-dimensional problems. Finite element equations for the axial and radial dimensions were developed utilizing Galerkin's method of weighted residuals. Crank-Nicholson approximations were used for time derivatives. A computer program was written for solution of the finite element equations.

Solutions obtained were conditionally stable; dependent on the value of the ratio KΔt/ρCpl². For values of the ratio less than 1/3, errors in …

The Removal And Recovery Of Fluoborate From Plating Rinse Waters, Terrence A. Hunter

Theses

Fluoborate poses a problem to electroplaters when discharged in their wastestreams. Therefore, a method for removing fluoborate from rinse waters is necessary. An ion floatation technique using a surfactant was developed at N.J.I.T. to perform this job. However, this technique requires long time periods therefore other methods were investigated.

Ultrafiltration was investigated as a replacement for the ion floatation technique. It would cut down the time required for the fluoborate removal. Also, electrolysis and the addition of excess acetic acid were tried in an attempt to separate the fluoborate and the surfactant in the ultrafiltration retentate. This system was evaluated …

Impingement Of An Axi-Symmetric Jet On A Flat Surface, Amir J. Daibes

Theses

An incompressible, inviscid irrotational flow model was used to represent the normal impingement of a circular axisymmetric jet upon a flat plate. An analytical investigation was conducted to determine the free surface of the jet and the solution of the potential flow problem was obtained using finite difference techniques for jet height-to-nozzle radius ratio of 2.4.

The velocity and pressure distributions at the plate surface and along the jet centerline were obtained.

The results from the finite difference solution are in close agreement with other most recent results from available experimental, and approximate solutions to the potential flow problem.

Test 1352: Hesston Fiat 680 Dt And 680 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1353: Hesston Fiat 880 Dt-5 And 880-5 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1350: John Deere 2040 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1351: John Deere 2940 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …

Test 1349: Kubota M7500dt And M7500 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF THE TEST PROCEDURE General Tractors are tested at the University of Nebraska according to the Agricultural Tractor Test Code approved by the American Society of Agricultural Engineers and the Society of Automotive Engineers or official Nebraska test procedure. The manufacturer selects the tractor to be tested and certifies that it is a stock model. Each tractor is equipped with the common power consuming accessories such as power steering, power lift pump, generator, etc., if available. Power consuming accessories may be disconnected only when the means for disconnecting can be reached from the operating station. An official representative of …